Add DT bindings for the Renesas RCar GyroADC block. This block is
a simple 4/8-channel ADC which samples 12/15/24 bits of data every
cycle from all channels.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Replace a mix of tabs and spaces indentation by tabs only.

Errors were reported by checkpatch.pl as
WARNING: Statements should start on a tabstop
WARNING: suspect code indent for conditional statement
Signed-off-by: Maxime Rossi Bellom <mrossibellom@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert leading spaces to tabs
Signed-off-by: William Blough <devel@blough.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch resolves the checkpatch issue:
multiple assignments should be avoided
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initial cleanup of bcm2835-audio driver for the
bcm2535(Raspberry PI)

Driver provides HDMI audio through ALSA and is built
on top of the vc04_services driver.

Original version of the driver is available at:
http://www.github.com/raspberry/linux

Driver compiles without any build errors or warnings.

Tested on a RPI 3 running in ARM64 mode with the
vlc player and alsautils.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fields frag_size and playload_size of struct ieee80211_txb are encoded
as short little-endian. This patch adds conversions to / from cpu byte
order when copy / write these values in variables of architecture
independent byte order. It also avoid a sparse type warning.
Signed-off-by: Colin Vidal <colin@cvidal.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch issue by adding space after ','.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch issue by adding space around '='.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multiple checkpatch.pl warnings:
function definition argument '...' should also have an identifier name
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using octal permissions instead of symbolic ones is preferred.
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using octal permissions instead of symbolic ones is preferred.
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The newly added function triggers a harmless warning:

drivers/staging/lustre/lustre/ptlrpc/pack_generic.c: In function 'lustre_shrink_msg':
drivers/staging/lustre/lustre/ptlrpc/pack_generic.c:472:1: error: control reaches end of non-void function [-Werror=return-type]

This probably happens because LASSERTF() contains an 'unlikely()' that
sometimes prevents gcc from analysing the control flow correctly.
Adding a return statement here seems harmless and lets us keep that
unlikely().

Fixes: 96049bd1 ("staging: lustre: ptlrpc: embed highest XID in each request")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace symbolic permissions with their octect representation to fix
checkpatch warnings.
Signed-off-by: Sebastian Haas <sehaas@deebas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The loopback driver allows the user to set a minimum delay of up to one
second to be inserted between test iterations (i.e. request
submissions). The delay is currently specified in microseconds and is
implemented using udelay.

Busy looping for long periods is not just anti-social; udelay must not
be used for delays longer than a few milliseconds due to the risk of
integer overflow.

Replace the broken udelay with a usleep_range with a 100 us range for
short delays (< 20 ms) and otherwise revert to using msleep.

Fixes: b36f04fa ("greybus: loopback: Convert thread delay to microseconds")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It fixes the following issue reported by checkpatch.pl:
Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Franck Demathieu <fdemathieu@gmail.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not have a low-latency mode and should not report
anything else.

Also drop the skip-test flag which isn't used either.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following errors:
Use 4 digit octal (0777) not decimal permissions
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Found by checkpatch:
- s/cacluated/calculated/
- s/convertor/converter/
- s/psudo/pseudo/
- s/halfs/halves/
Signed-off-by: Joseph Wright <rjosephwright@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are multiple entries for ili9225 display defined in
flexfb_chip_table array. remove duplicate entries and
keep single entry.
Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify lirc_parallel driver to use the new parallel port device model.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify all the msg union fields from typedefs to
to proper structures.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_hdr_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_magicversion_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_acceptor_connreq_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_process_id_packed_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_ni_status_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_ping_info_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change lnet_handle_wire_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change uint32_t to u32, solved the issue reported by checkpatch.pl:

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+			uint32_t *format, uint32_t *rate, u8 *channels,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+			uint32_t format, uint32_t rate, u8 channels,
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed comparison, moved the constant to the right side of the test
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch issue by adding space around '='.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76222772
"iio: accel: st_accel: handle deprecated bindings"
attempted to be smart and let users use the old I2C
driver and the new SPI driver, or the old SPI driver and
the new I2C driver in combination for the LIS3LV02,
and put the restrictions on the I2C and SPI subdrivers
not not be combined with the old subdrivers.

This doesn't work since the IIO ST accel top-level
component selects the I2C and SPI subdrivers, resulting
in the following Kconfig noise:

warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_I2C_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_I2C
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_I2C)
warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_SPI_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_SPI
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_SPI)
(...)

This fixes the issue by putting the dependencies directly
in the top-level component instead, so that it never gets
to select its unselectable subcomponent.

Fixes: 76222772 ("iio: accel: st_accel: handle deprecated bindings")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Jonathan writes:

Second round of IIO new device support, cleanups and features for the 4.11 cycle

New device support:
* lsm6dsx imu
  - new driver and bindings.
* max11100 adc
  - new driver and bindings.
* tlc4541
  - new driver
* tmp007 thermopile
  - new driver.

Core
* in kernel interfaces
  - pass through raw values if no scaling provided and a processed value is
    requested.
* trigger
  - close a race condition in acquiring trigger reference.
  - constify device_type structures.
  - rework the viio_trigger_alloc function to be much neater and easier to
  read.
  - free trigger resources correctly on some error paths. Avoids putting a
  module we don't have.

Documentation
* ABI
  - specify a unit for proximity measurements.

Cleanups and features
* ads1015
  - constify iio_info structure.
* ads7950 cleanups following merge in previous pull
  - Add device tree bindings
  - Drop the ti prefix from the module name in common with other drivers.
  - Change regulator name to vref to match datasheet and other drivers.
* ak8974
  - remove a redundant zero timeout check.
* bmi160
  - use variable names for sizeof instead of types.
* cm3605
  - mark PM functions as __maybe_unused to avoid a build warning.
* isl29028 (on it's way towards moving out of staging).
  - alignment fixes and newline improvements.
  - combine proxim_get and read_proxim for simpler code.
  - drop unused ISL29028_DEV_ATTR macro
  - move some error logging into functions to cut out repitition.
  - make error messages more consistent.
  - tidy up some brackets.
  - drop the enable flag that nothing uses.
  - only set proximity rate and ALS scale when relevant channel type is enabled.
  - runtime pm support.
* lsm6dsx
  - fix wrong values for gyro sensitivitiy.
* mag3110
  - claim direct mode during sysfs reads to avoid a race condition.
* max1363
  - export OF device table IDs as module aliases.
* max30100
  - use msleep for long uncritical delays.
* mcp4531
  - export OF device table as module aliases.
* ms5611
  - claim direct mode during sysfs reads to avoid a race condition.
* opt3001
  - export OF device table as module aliases.
* sx9500
  - claim direct mode during oversampling changes to avoid a race condition.

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1) Reverse the test for kmalloc() failure so we can pull everything
   back one tab.
2) Use gotos for unwinding.
3) Some of the extra line breaks for the 80 character limit are no
   longer needed so we can remove them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Declare iio_info structures as const as they are only stored in
the info field of a iio_dev structure. This field is of type const,
so iio_info structures having similar properties can be made const too.

File size before:
   text	   data	    bss	    dec	    hex	filename
   6944	    792	      0	   7736	   1e38	drivers/iio/adc/ti-ads1015.o

File size after:
   text   data	    bss	    dec	    hex	filename
   7264	    472	      0	   7736	   1e38	drivers/iio/adc/ti-ads1015.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Declare device_type structure as const as it is only stored in the
type field of a device structure. This field is of type const, so add
const to declaration of device_type structure.

File size before:
   text	   data	    bss	    dec	    hex	filename
   5389	    208	     48	   5645	   160d	iio/industrialio-trigger.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   5453	    176	     48	   5677	   162d	iio/industrialio-trigger.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In iio_trigger_write_current() we find the trigger we want while
holding mutex on the list of triggers, but we don't actually do a
get on it while holding mutex.  We wait until further validations
are completed and we're sure it's the one we want.  Race condition
is that it could be freed by the time we do the get.

Solution is to grab the trigger (iio_trigger_get) as soon as we
find it while holding mutex on the list of triggers.  If later
we decide it's not the right one, put it back. (iio_trigger_put).
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>