- 09 Oct, 2018 34 commits
-
-
Rex Zhu authored
1. make uvd_v7_0_enc_get_destroy_msg static 2. drop a function variable that always true Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Shirish S authored
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before we signal hw_done(). [Why] This is to temporarily address a paging error that occurs when a nonblocking commit contends with another commit, particularly in a mirrored display configuration where at least 2 CRTCs are updated. The error occurs in drm_atomic_helper_wait_for_flip_done(), when we attempt to access the contents of new_crtc_state->commit. Here's the sequence for a mirrored 2 display setup (irrelevant steps left out for clarity): **THREAD 1** | **THREAD 2** | Initialize atomic state for flip | | Queue worker | ... | Do work for flip | | Signal hw_done() on CRTC 1 | Signal hw_done() on CRTC 2 | | Wait for flip_done() on CRTC 1 <---- **PREEMPTED BY THREAD 1** Initialize atomic state for cursor | update (1) | | Do cursor update work on both CRTCs | | Clear atomic state (2) | **DONE** | ... | | Wait for flip_done() on CRTC 2 | *ERROR* | The issue starts with (1). When the atomic state is initialized, the current CRTC states are duplicated to be the new_crtc_states, and referenced to be the old_crtc_states. (The new_crtc_states are to be filled with update data.) Some things to note: * Due to the mirrored configuration, the cursor updates on both CRTCs. * At this point, the pflip IRQ has already been handled, and flip_done signaled on all CRTCs. The cursor commit can therefore continue. * The old_crtc_states used by the cursor update are the **same states** as the new_crtc_states used by the flip worker. At (2), the old_crtc_state is freed (*), and the cursor commit completes. We then context switch back to the flip worker, where we attempt to access the new_crtc_state->commit object. This is problematic, as this state has already been freed. (*) Technically, 'state->crtcs[i].state' is freed, which was made to reference old_crtc_state in drm_atomic_helper_swap_state() [How] By moving hw_done() after wait_for_flip_done(), we're guaranteed that the new_crtc_state (from the flip worker's perspective) still exists. This is because any other commit will be blocked, waiting for the hw_done() signal. Note that both the i915 and imx drivers have this sequence flipped already, masking this problem. Signed-off-by:Shirish S <shirish.s@amd.com> Signed-off-by:
Leo Li <sunpeng.li@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning: implicit conversion from enumeration type 'enum aux_channel_operation_result' to different enumeration type 'enum aux_transaction_reply' [-Wenum-conversion] reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19: warning: implicit conversion from enumeration type 'enum aux_channel_operation_result' to different enumeration type 'enum aux_transaction_reply' [-Wenum-conversion] reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The current enum is incorrect, it should be from aux_transaction_reply, so use AUX_TRANSACTION_REPLY_HPD_DISCON. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] The DISPCLK value was previously requested to be 15% higher for all ASICS that went through the dce110 bandwidth code path. As part of a refactoring of dce_clocks and dce110 set_bandwidth this was removed for power saving considerations. This changed caused corruption under certain display configurations. Originally thought to be Vega specific, it was also observed on Polaris. [How] The 15% is brought back but its placement differs from the original patch. This boost should only be enable while DFS bypass is inactive. This (like the Vega patch) is also a workaround that should be removed after the root cause is identified. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Murton Liu authored
[Why] Due to a small pre-fetch window, the active vline timing is a couple of lines off when compared to what it should be. [How] Changed the calculation for the start vline to account for this window. Signed-off-by:
Murton Liu <murton.liu@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Charlene Liu authored
[Description] interlace mode shows wrong vertical timing. Interface timing in Edid is half vertical timing as progressive timing. driver doubled the vertical timing in edid_paser, no need to double in optc again. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Leo Li authored
[Why] There is no reason why the common data needs to be kept separate. [How] Flatten the struct by moving common data into the DM IRQ struct. Signed-off-by:
David Francis <David.Francis@amd.com> Acked-by:
-
Jun Lei authored
[why] ddc engines were recently changed to be independently tracked from pipe count. the change was reflected in resource constructor but not in destructor. this manifests as a memory leak when pipe harvesting is enabled, since not all constructed ddc engines are freed [how] make destructor symmetric with constructor for all dcX_resource Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
-
Tony Cheng authored
Signed-off-by:
Tony Cheng <tony.cheng@amd.com> Reviewed-by:
Steven Chiu <Steven.Chiu@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL is set by bios command table during dcn init_hw. [How] As a work around, check STATE_CNTL status before init_hw, if it is 0 before init_hw and set to 1 after init_hw, change it to 0. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Eric Yang authored
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
-
Eric Yang authored
[why] Currently not supported, will black screen when set. [How] Fail validate timing helper for those modes. Signed-off-by:
-
Eryk Brol authored
Also add dram clock to clocks struct, for systems that uses them. Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Reviewed-by:
-
Su Sung Chung authored
[Why] Previously bandwidth validation was failing because swizzle mode was not initialized during plane_state allocation. The swizzle mode was calculated using pixed format which is how swizzle mode is initially calculated in addrlib. [How] * Set default swizzle mode for validation to DC_SW_UNKNOWN * Created new function in dcn10_assign_swizzle_mode which sets the plane swizzle mode based on selected pixed format * Added the call of assign_swizzle_mode into dc_validate_global_state * Set failsafe swizzle mode back to DC_SW_LINEAR Signed-off-by:
Su Sung Chung <Su.Chung@amd.com> Reviewed-by:
-
Nikola Cornij authored
[why] Same functions exist for all other signal types. [how] Add a function that checks against virtual signal type. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
-
Charlene Liu authored
[Why] HDMI_scramber is not enabled for pixel rate >340Mhz. [How] Calculate the phy clock to include the Hw frame packing factor. Signed-off-by:
-
Jun Lei authored
[why] Sometimes there are indications that the incorrect driver is being loaded in automated tests. This change adds the ability for builds to be tagged with a string, and picked up by the test infrastructure. [how] dc.c will allocate const for build id, which is init-ed with default value, indicating production build. For test builds, build server will find/replace this value. The test machine will then verify this value. Signed-off-by:
-
Akshu Agrawal authored
We observe black lines (underflow) on display when playing a 4K video with UVD. On Disabling Low memory P state this issue is not seen. Multiple runs of power measurement shows no imapct. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by:
Satyajit Sahu <satyajit.sahu@amd.com> Acked-by:
-
Rex Zhu authored
HW CG feature will be enabled after hw ip initialized Reviewed-by:
-
Rex Zhu authored
the vcn power will be controlled by VCN. Reviewed-by:
-
Rex Zhu authored
smu only expose interface to other ip blocks. in order to reduce dependence between smu and other ip blocks Reviewed-by:
-
Rex Zhu authored
SDMA IP can be power up/down via smu message Reviewed-by:
-
Rex Zhu authored
The minRPM speed maybe equal to zero. so need to check input RPM not equal to 0, otherwise cause divide-by-zero driver crash. Reviewed-by:
-
Rex Zhu authored
set the target rpm value to wrong register. Reviewed-by:
-
Rex Zhu authored
Reviewed-by:
-
Evan Quan authored
Added Vega20 specific implementation for MGPU fan boost feature. Signed-off-by:
-
Evan Quan authored
MGPU fan boost feature is enabled only when two or more dGPUs in the system. Signed-off-by:
-
Evan Quan authored
Count all GPU instances from AMD(including iGPUs and dGPUs) in the system. V2: drop unnecessary initialization for other gpu_info members except mutex Signed-off-by: -
Alex Deucher authored
Make the profile name line match previous generations more closely. E.g., 0 3D_FULL_SCREEN : vs: 0(3D_FULL_SCREEN ) Reviewed-by:
-
Evan Quan authored
For Vega10 and Vega20, the always on CUs are 12. For Raven, it's 4. Signed-off-by:
-
Evan Quan authored
Enable LBPW support on vega20. v2: squash in warning fix (Alex) Signed-off-by:
-
Evan Quan authored
Manual fan RPM and pwm setting on vega20 are available now. V2: correct the register for fan speed setting and avoid divide-by-zero Signed-off-by: -
Evan Quan authored
Export the correct gfx voltage by hwmon interface. V2: update the register naming for consistency Signed-off-by:
-
Evan Quan authored
The ppt limit read out by hwmon interface is always 0. Correct this hwmon interface output. Signed-off-by:
-
- 04 Oct, 2018 6 commits
-
-
git://linux-arm.org/linux-ldDave Airlie authored
misc mali-dp updates. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181003105009.GD1156@e110455-lin.cambridge.arm.com
-
https://github.com/jsarha/linuxDave Airlie authored
drm/tilcdc changes for Linux v4.20 suspend/resume update. Signed-off-by:
-
Dave Airlie authored
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: -
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add out-bridge support - This patch series enables out-bridge for LVDS bridge device support, and also includes two cleanups and one relevant dt binding update for this. Add Samsung 16x16 tiled format support - This patch series adds Samsung 16x16 tiled format to scaler and gsc drivers. As for this, it adds Samsung specific format to drm_forcc.h header. For the git-pull request with relevant patches, I requested ack-by[1] to relevant maintainers but there was no any response. I'm pretty sure no problem to go to mainline though Exynos tree because the only user of it is Exynos. (airlied: this looked fine to me) [1] https://patchwork.freedesktop.org/patch/243921/ Add configurable plane alpha and pixel blend mode support - This patch series makes mixer driver to be configuragle for pixel blend mode and plane alpha, which also includes one fixup to set all default values correctly after reset. One cleanup - This patch replaces drm_atomic_helper_suspend/resume() with drm_mode_config_helper_suspend/resume() to remove exynos specific suspend_state. Signed-off-by:
-
Dave Airlie authored
Merge tag 'omapdrm-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm fixes and cleanups for 4.20 - fix memory barrier bug in DMM driver - fix interrupt management in DMM driver - partial workaround for errata i878 - fix use of freed memory - some cleanups Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil) Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
