- 30 Mar, 2017 40 commits
-
-
Sumit Semwal authored
From: Dan Streetman <ddstreet@ieee.org> [ Upstream commit c74fd80f ] Revert the main part of commit: af42b8d1 ("xen: fix MSI setup and teardown for PV on HVM guests") That commit introduced reading the pci device's msi message data to see if a pirq was previously configured for the device's msi/msix, and re-use that pirq. At the time, that was the correct behavior. However, a later change to Qemu caused it to call into the Xen hypervisor to unmap all pirqs for a pci device, when the pci device disables its MSI/MSIX vectors; specifically the Qemu commit: c976437c7dba9c7444fb41df45468968aaa326ad ("qemu-xen: free all the pirqs for msi/msix when driver unload") Once Qemu added this pirq unmapping, it was no longer correct for the kernel to re-use the pirq number cached in the pci device msi message data. All Qemu releases since 2.1.0 contain the patch that unmaps the pirqs when the pci device disables its MSI/MSIX vectors. This bug is causing failures to initialize multiple NVMe controllers under Xen, because the NVMe driver sets up a single MSIX vector for each controller (concurrently), and then after using that to talk to the controller for some configuration data, it disables the single MSIX vector and re-configures all the MSIX vectors it needs. So the MSIX setup code tries to re-use the cached pirq from the first vector for each controller, but the hypervisor has already given away that pirq to another controller, and its initialization fails. This is discussed in more detail at: https://lists.xen.org/archives/html/xen-devel/2017-01/msg00447.html Fixes: af42b8d1 ("xen: fix MSI setup and teardown for PV on HVM guests") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Darrick J. Wong authored
commit 2aa6ba7b upstream. If we try to allocate memory pages to back an xfs_buf that we're trying to read, it's possible that we'll be so short on memory that the page allocation fails. For a blocking read we'll just wait, but for readahead we simply dump all the pages we've collected so far. Unfortunately, after dumping the pages we neglect to clear the _XBF_PAGES state, which means that the subsequent call to xfs_buf_free thinks that b_pages still points to pages we own. It then double-frees the b_pages pages. This results in screaming about negative page refcounts from the memory manager, which xfs oughtn't be triggering. To reproduce this case, mount a filesystem where the size of the inodes far outweighs the availalble memory (a ~500M inode filesystem on a VM with 300MB memory did the trick here) and run bulkstat in parallel with other memory eating processes to put a huge load on the system. The "check summary" phase of xfs_scrub also works for this purpose. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Cc: Ivan Kozik <ivan@ludios.org> Signed-off-by:
-
Johan Hovold authored
commit 687e0687 upstream. USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f6 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f67 ("USB: add USB test and measurement class driver") Signed-off-by:
Johan Hovold <johan@kernel.org> [ johan: backport to v4.4 ] Signed-off-by:
-
Johannes Berg authored
commit ea90e0dc upstream. Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out to be perfectly accurate - there are various error paths that miss unlock of the RTNL. To fix those, change the locking a bit to not be conditional in all those nl80211_prepare_*_dump() functions, but make those require the RTNL to start with, and fix the buggy error paths. This also let me use sparse (by appropriately overriding the rtnl_lock/rtnl_unlock functions) to validate the changes. Reported-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Eric Sandeen authored
commit 4dfce57d upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. [nborisov: backported to 4.4] Cc: stable@vger.kernel.org Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Darrick J. Wong authored
commit ef388e20 upstream. The on-disk field di_size is used to set i_size, which is a signed integer of loff_t. If the high bit of di_size is set, we'll end up with a negative i_size, which will cause all sorts of problems. Since the VFS won't let us create a file with such length, we should catch them here in the verifier too. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit b581a585 upstream. Since ceph.git commit 4e28f9e63644 ("osd/OSDMap: clear osd_info, osd_xinfo on osd deletion"), weight is set to IN when OSD is deleted. This changes the result of applying an incremental for clients, not just OSDs. Because CRUSH computations are obviously affected, pre-4e28f9e63644 servers disagree with post-4e28f9e63644 clients on object placement, resulting in misdirected requests. Mirrors ceph.git commit a6009d1039a55e2c77f431662b3d6cc5a8e8e63f. Fixes: 930c5328 ("libceph: apply new_state before new_up_client on incrementals") Link: http://tracker.ceph.com/issues/19122Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Tomasz Majchrzak authored
commit 9b622e2b upstream. md pending write counter must be incremented after bio is split, otherwise it gets decremented too many times in end bio callback and becomes negative. Signed-off-by:
Tomasz Majchrzak <tomasz.majchrzak@intel.com> Reviewed-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Viresh Kumar authored
commit ff010472 upstream. On CPU online the cpufreq core restores the previous governor (or the previous "policy" setting for ->setpolicy drivers), but it does not restore the min/max limits at the same time, which is confusing, inconsistent and real pain for users who set the limits and then suspend/resume the system (using full suspend), in which case the limits are reset on all CPUs except for the boot one. Fix this by making cpufreq_online() restore the limits when an inactive policy is brought online. The commit log and patch are inspired from Rafael's earlier work. Reported-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Nicolas Ferre authored
commit b1708b72 upstream. The dmas/dma-names properties are added to the UART nodes. Note that additional properties are needed to enable them at the board level: check bindings for details. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Nicolas Ferre authored
commit 60b89f19 upstream. On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it... Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 017b5522 ("ARM: at91: Add new binding for sama5d3-ddramc") Signed-off-by:
-
Koos Vriezen authored
commit 5003ae1e upstream. The function device_to_iommu() in the Intel VT-d driver lacks a NULL-ptr check, resulting in this oops at boot on some platforms: BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 PGD 0 [...] Call Trace: ? find_or_alloc_domain.constprop.29+0x1a/0x300 ? dw_dma_probe+0x561/0x580 [dw_dmac_core] ? __get_valid_domain_for_dev+0x39/0x120 ? __intel_map_single+0x138/0x180 ? intel_alloc_coherent+0xb6/0x120 ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm] ? mutex_lock+0x9/0x30 ? kernfs_add_one+0xdb/0x130 ? devres_add+0x19/0x60 ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm] ? platform_drv_probe+0x30/0x90 ? driver_probe_device+0x1ed/0x2b0 ? __driver_attach+0x8f/0xa0 ? driver_probe_device+0x2b0/0x2b0 ? bus_for_each_dev+0x55/0x90 ? bus_add_driver+0x110/0x210 ? 0xffffffffa11ea000 ? driver_register+0x52/0xc0 ? 0xffffffffa11ea000 ? do_one_initcall+0x32/0x130 ? free_vmap_area_noflush+0x37/0x70 ? kmem_cache_alloc+0x88/0xd0 ? do_init_module+0x51/0x1c4 ? load_module+0x1ee9/0x2430 ? show_taint+0x20/0x20 ? kernel_read_file+0xfd/0x190 ? SyS_finit_module+0xa3/0xb0 ? do_syscall_64+0x4a/0xb0 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49 RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 RSP <ffffc90001457a78> CR2: 00000000000007ab ---[ end trace 16f974b6d58d0aad ]--- Add the missing pointer check. Fixes: 1c387188 ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions") Signed-off-by:
Koos Vriezen <koos.vriezen@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Ankur Arora authored
commit 1914f0cd upstream. This was broken in commit cd979883 ("xen/acpi-processor: fix enabling interrupts on syscore_resume"). do_suspend (from xen/manage.c) and thus xen_resume_notifier never get called on the initial-domain at resume (it is if running as guest.) The rationale for the breaking change was that upload_pm_data() potentially does blocking work in syscore_resume(). This patch addresses the original issue by scheduling upload_pm_data() to execute in workqueue context. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Based-on-patch-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Ankur Arora <ankur.a.arora@oracle.com> Signed-off-by:
-
Adrian Hunter authored
commit e2ebfb21 upstream. Disabling interrupts for even a millisecond can cause problems for some devices. That can happen when sdhci changes clock frequency because it waits for the clock to become stable under a spin lock. The spin lock is not necessary here. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. Although the spin lock probably should be removed from the code paths that lead to this point, such a patch would touch too much code to be suitable for stable trees. Consequently, for this patch, just drop the spin lock while waiting. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Eric Biggers authored
commit b9cf625d upstream. If ext4_convert_inline_data() was called on a directory with inline data, the filesystem was left in an inconsistent state (as considered by e2fsck) because the file size was not increased to cover the new block. This happened because the inode was not marked dirty after i_disksize was updated. Fix this by marking the inode dirty at the end of ext4_finish_convert_inline_dir(). This bug was probably not noticed before because most users mark the inode dirty afterwards for other reasons. But if userspace executed FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by 'kvm-xfstests -c adv generic/396', then the inode was never marked dirty after updating i_disksize. Fixes: 3c47d541Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Sudip Mukherjee authored
commit 03270c6a upstream. Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a nice warning like: "sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists" Use the same logic as used in parport_register_device() and register the proc files only once for each parallel port. Fixes: 6fa45a22 ("parport: add device-model to parport subsystem") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322Tested-by:
James Feeney <james@nurealm.net> Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Song Hongyan authored
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3 commit 3bec2474 upstream. In function _hid_sensor_power_state(), when hid_sensor_read_poll_value() is called, sensor's all properties will be updated by the value from sensor hardware/firmware. In some implementation, sensor hardware/firmware will do a power cycle during S3. In this case, after resume, once hid_sensor_read_poll_value() is called, sensor's all properties which are kept by driver during S3 will be changed to default value. But instead, if a set feature function is called first, sensor hardware/firmware will be recovered to the last status. So change the sensor_hub_set_feature() calling order to behind of set feature function to avoid sensor properties lose. Signed-off-by:
Song Hongyan <hongyan.song@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Michael Engl authored
commit e83bb3e6 upstream. The tiadc_irq_h(int irq, void *private) function is handling FIFO overruns by clearing flags, disabling and enabling the ADC to recover. If the ADC is running in continuous mode a FIFO overrun happens regularly. If the disabling of the ADC happens concurrently with a new conversion. It might happen that the enabling of the ADC is ignored by the hardware. This stops the ADC permanently. No more interrupts are triggered. According to the AM335x Reference Manual (SPRUH73H October 2011 - Revised April 2013 - Chapter 12.4 and 12.5) it is necessary to check the ADC FSM bits in REG_ADCFSM before enabling the ADC again. Because the disabling of the ADC is done right after the current conversion has been finished. To trigger this bug it is necessary to run the ADC in continuous mode. The ADC values of all channels need to be read in an endless loop. The bug appears within the first 6 hours (~5.4 million handled FIFO overruns). The user space application will hang on reading new values from the character device. Fixes: ca9a5638 ("iio: ti_am335x_adc: Add continuous sampling support") Signed-off-by:
Michael Engl <michael.engl@wjw-solutions.com> Signed-off-by:
-
Johan Hovold authored
commit 181302dc upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 53f3a9e2 ("mmc: USB SD Host Controller (USHC) driver") Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
commit daf229b1 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the start callback which is called during probe. Fixes: de520b8b ("uwb: add HWA radio controller driver") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
commit 4ce36271 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the cmd and wait_init_done callbacks which are called during probe. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Guenter Roeck authored
commit 7b2db29f upstream. If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae88 ("xhci: Enable LPM support only for hardwired ...") Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Bin Liu authored
commit 0090114d upstream. The CPPI 4.1 driver polls register to workaround the premature TX interrupt issue, but it causes audio playback underrun when triggered in Isoch transfers. Isoch doesn't do back-to-back transfers, the TX should be done by the time the next transfer is scheduled. So skip this polling workaround for Isoch transfer. Fixes: a655f481 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt") Reported-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Johan Hovold authored
commit 03ace948 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. This specifically fixes the NULL-pointer dereference when probing HWA HC devices. Fixes: df365423 ("wusb: add the Wire Adapter (WA) core") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
commit b0addd3f upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 1dc56c52 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should the probed device lack endpoints. Note that this driver does not bind to any devices by default. Fixes: ce21bfe6 ("USB: Add LVS Test device driver") Cc: Pratyush Anand <pratyush.anand@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit f259ca3e upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Note that the endpoint access that causes the NULL-deref is currently only used for debugging purposes during probe so the oops only happens when dynamic debugging is enabled. This means the driver could be rewritten to continue to accept device with only two endpoints, should such devices exist. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Samuel Thibault authored
commit 3243367b upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Roger Quadros authored
commit 09424c50 upstream. The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Oliver Neukum authored
commit cdd7928d upstream. The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Tested-by:
家瑋 <momo1208@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit 436ecf55 upstream. This is a Dell branded Sierra Wireless EM7455. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Dan Williams authored
commit 6e9f44ea upstream. Add Quectel UC15, UC20, EC21, and EC25. The EC20 is handled by qcserial due to a USB VID/PID conflict with an existing Acer device. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Hui Wang authored
commit 3f307834 upstream. A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix the headset problem, and the pin definiton of this machine is not in the pin quirk table yet, now adding it to the table. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f363a066 upstream. In the commit [15c75b09: ALSA: ctxfi: Fallback DMA mask to 32bit], I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while cthw20k2.c is OK). This patch fixes that obvious bug. (As a side note: although the original commit was completely wrong, it's still working for most of machines, as it sets to 32bit DMA mask in the end. So the bug severity is low.) Fixes: 15c75b09 ("ALSA: ctxfi: Fallback DMA mask to 32bit") Signed-off-by:
-
Takashi Iwai authored
commit c520ff3d upstream. When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.comReported-and-tested-by:
-
Johan Hovold authored
commit 92461f5d upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit cb1b4946 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Signed-off-by:
-
Johan Hovold authored
commit ac2ee9ba upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c04148f9 ("Input: add driver for USB VoIP phones with CM109...") Signed-off-by:
-
Johan Hovold authored
commit 5cc4a1a9 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: aca951a2 ("[PATCH] input-driver-yealink-P1K-usb-phone") Signed-off-by:
-
Johan Hovold authored
commit ba340d7b upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: bba5394a ("Input: add support for Hanwang tablets") Signed-off-by:
-
