- 27 Dec, 2018 2 commits
-
-
Sam Ravnborg authored
Move DRM_IF_VERSION out of drmP.h to allow users to get rid of the drmP include. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181226210353.13993-1-sam@ravnborg.org
-
Brajeswar Ghosh authored
Remove drm_crtc_internal.h which is included more than once Signed-off-by:
Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by:
-
- 24 Dec, 2018 1 commit
-
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
- 20 Dec, 2018 1 commit
-
-
Gerd Hoffmann authored
Check header before trying to read the complete edid blob, to avoid the log being spammed in case qemu has no edid support (old qemu or edid support turned off). Fixes: 01f23459 drm/bochs: add edid support. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181220101122.16153-1-kraxel@redhat.com
-
- 19 Dec, 2018 6 commits
-
-
Boris Brezillon authored
Now that the plane code takes the margins setup into account, we can safely attach margin props to the HDMI connector. We also take care of filling AVI infoframes correctly to expose the top/botton/left/right bar. Note that those margin props match pretty well the overscan_{left,right,top,bottom} properties defined in config.txt and parsed by the VC4 firmware. Signed-off-by:Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Acked-by:
-
Boris Brezillon authored
Applyin margins is just a matter of scaling all planes appropriately and adjusting the CRTC X/Y offset to account for the left/right/top/bottom borders. Create a vc4_plane_margins_adj() function doing that and call it from vc4_plane_setup_clipping_and_scaling() so that we are ready to attach margins properties to the HDMI connector. Signed-off-by:
-
Boris Brezillon authored
TV margins properties can only be added as part of the SDTV TV connector properties creation, but we might need those props for HDMI TVs too, so let's move the margins props creation in a separate function and expose it to drivers. We also add an helper to attach margins props to a connector. Signed-off-by:
-
Boris Brezillon authored
All margins are expressed in pixels. Clarify that in the doc. Signed-off-by:
-
Boris Brezillon authored
The in the kernel-doc header did not match the function name. Signed-off-by:
-
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lg4n1izg.wl-kuninori.morimoto.gx@renesas.com
-
- 18 Dec, 2018 1 commit
-
-
Archit Taneja authored
I have moved on to other stuff for now. Haven't been able to make time to review bridge related work. Andrzej has been doing it by himself for a while now. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
- 17 Dec, 2018 3 commits
-
-
emersion authored
Otherwise DRM_CAP_DUMB_PREFERRED_DEPTH is zero. Signed-off-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
Dan Carpenter authored
The drm_ati_pcigart_init() function was originally suppose to return one on success and zero on failure, but these days it returns a mix of zero, one and -ENOMEM on failure. This patch cleans it up and modifies the caller so now the function returns zero on success and negative error codes on failure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The drm_mode_create_tile_group() is only called from drm_parse_tiled_block() and the caller expects it to return a NULL on error. In other words, this function should match drm_mode_get_tile_group(). Signed-off-by:
-
- 14 Dec, 2018 4 commits
-
-
Lyude Paul authored
This: - Adds local variables in the first loop, instead of using array indices everywhere - Adds an early continue to reduce the indent level in the second loop There should be no functional changes here Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
-
Lyude Paul authored
There's no reason we need this, it's just confusing looking. Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181213134915.24722-1-kraxel@redhat.com
-
Shayenne da Luz Moura authored
This patch remove the follow complete task from TODO documentation: drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should be renamed to drm_mode_config.object_idr. Signed-off-by:
Shayenne da Luz Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
- 13 Dec, 2018 2 commits
-
-
Lyude Paul authored
We need to call drm_dp_mst_topology_mgr_set_mst(mgr, false) when destroying the topology manager in order to ensure that the root mstb and all of it's descendents are actually destroyed, and additionally to try to make sure that we leave the hub in a clean state. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181211235026.21758-1-lyude@redhat.com
-
Shayenne da Luz Moura authored
This patch solves this TODO task: drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should be renamed to drm_mode_config.object_idr. Signed-off-by:
-
- 12 Dec, 2018 3 commits
-
-
Heiko Stuebner authored
Render like lima will attach a fence to the framebuffer dma_buf, so the display driver should wait for it to finish before showing the framebufferto prevent tearing. Generally tested on rk3188, rk3288, rk3328 and rk3399 and together with an actual lima-based kmscube on rk3188 and rk3328. Suggested-by:
Qiang Yu <yuq825@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130102449.6430-1-heiko@sntech.de
-
Daniel Vetter authored
Doesn't do anything for atomic. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: xen-devel@lists.xen.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Daniel Vetter authored
Doesn't do anything with atomic. Signed-off-by:
-
- 11 Dec, 2018 3 commits
-
-
Christian König authored
This completes "drm/syncobj: Drop add/remove_callback from driver interface" and cleans up the implementation a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/266255/
-
Christian König authored
The fence seqno is now 64bit, fixes build warning. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
-
Rob Clark authored
Follow the same pattern of locking as with other state objects. This avoids boilerplate in the driver. Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
- 10 Dec, 2018 4 commits
-
-
Ville Syrjälä authored
Make sure i2c msgs we're asked to transfer conform to the requirements of REMOTE_I2C_READ. We were only checking that the last message is a read, but we must also check that the preceding messages are all writes. Also check that the length of each message isn't too long. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-2-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Ville Syrjälä authored
We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/ast/ast_fb.c: In function 'astfb_create': drivers/gpu/drm/ast/ast_fb.c:194:17: warning: variable 'bo' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 312fec14 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Daniel Vetter authored
When everyone implements it exactly the same way, among all 4 implementations, there's not really a need to overwrite this at all. Aside: drm_kms_helper_hotplug_event is pretty much core functionality at this point. Probably should move it there. Reviewed-by:
-
- 08 Dec, 2018 2 commits
-
-
Boris Brezillon authored
Add support for X/Y reflection when the plane is using linear or T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so we reject them until proper testing/debugging has been done. Signed-off-by:
-
Boris Brezillon authored
Commit 3e407417 ("drm/vc4: Fix X/Y positioning of planes using T_TILES modifier") fixed the problem with T_TILES format, but left things in a non-working state for SAND formats. Address that now. Signed-off-by:
-
- 07 Dec, 2018 8 commits
-
-
Eric Anholt authored
This would be a fairly obscure race, but let's make sure we don't ever lose it. Signed-off-by:
Dave Emett <david.emett@broadcom.com>
-
Eric Anholt authored
This cache was replaced with the slice accessing the L2T in the newer generations. Noted by Dave during review. Signed-off-by:
-
Eric Anholt authored
According to Dave, once you've started an L2T flush, all L2T accesses will be blocked until the flush completes. This fixes a consistent 3-4ms stall between the ioctl and running the job, and 3DMMES Taiji goes from 27fps to 110fps. v2: Leave a note about why we don't need to wait for completion. Signed-off-by:
-
Eric Anholt authored
This is the write combiner for TMU writes. You're supposed to flush that at job end if you had dirtied any cachelines. Flushing it at job start then doesn't make any sense. Signed-off-by:
-
Eric Anholt authored
Now that I've specified how the end-of-pipeline flushing should work, we're never going to use this function. Signed-off-by:
-
Eric Anholt authored
Right now, userspace doesn't do any L2T writes, but we should lay out our expectations for how it works. v2: Explicitly mention the VCD cache flushing requirements and that we'll flush the other caches before each of the CLs. Signed-off-by: -
Mika Kuoppala authored
Many errs of the form: drivers/gpu/drm/i915/selftests/intel_hangcheck.c: In function ‘__igt_reset_evict_vma’: ./include/linux/kern_levels.h:5:18: error: format ‘%x’ expects argument of type ‘unsigned int’, but argum Fixes: b312d8ca ("dma-buf: make fence sequence numbers 64 bit v2") Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Christian König authored
For a lot of use cases we need 64bit sequence numbers. Currently drivers overload the dma_fence structure to store the additional bits. Stop doing that and make the sequence number in the dma_fence always 64bit. For compatibility with hardware which can do only 32bit sequences the comparisons in __dma_fence_is_later only takes the lower 32bits as significant when the upper 32bits are all zero. v2: change the logic in __dma_fence_is_later Signed-off-by:
-
