- 15 May, 2014 40 commits
-
-
Theodore Ts'o authored
commit 6e6358fc upstream. We haven't taken i_mutex yet, so we need to use i_size_read(). Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Theodore Ts'o authored
commit 622cad13 upstream. The function ext4_update_i_disksize() is used in only one place, in the function mpage_map_and_submit_extent(). Move its code to simplify the code paths, and also move the call to ext4_mark_inode_dirty() into the i_data_sem's critical region, to be consistent with all of the other places where we update i_disksize. That way, we also keep the raw_inode's i_disksize protected, to avoid the following race: CPU #1 CPU #2 down_write(&i_data_sem) Modify i_disk_size up_write(&i_data_sem) down_write(&i_data_sem) Modify i_disk_size Copy i_disk_size to on-disk inode up_write(&i_data_sem) Copy i_disk_size to on-disk inode Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit ec4cb1aa upstream. When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Matthew Wilcox authored
commit 9503c67c upstream. ext4_end_bio() currently throws away the error that it receives. Chances are this is part of a spate of errors, one of which will end up getting the error returned to userspace somehow, but we shouldn't take that risk. Also print out the errno to aid in debug. Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
-
Kazuya Mio authored
commit 4adb6ab3 upstream. When we try to get 2^32-1 block of the file which has the extent (ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON in ext4_ext_put_gap_in_cache(). To avoid the problem, ext4_map_blocks() needs to check the file logical block number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot handle 2^32-1 because the maximum file logical block number is 2^32-2. Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid. So ext4_map_blocks() should also return the same errno. Signed-off-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 238e1405 upstream. If parent device does not have of_node set the s2mps11_clk_parse_dt() returned NULL. This NULL was later passed to of_clk_add_provider() which dereferenced it in pr_debug() call. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Tetsuo Handa authored
commit f81c2015 upstream. Commit 9548906b ('xattr: Constify ->name member of "struct xattr"') missed that ocfs2 is calling kfree(xattr->name). As a result, kernel panic occurs upon calling kfree(xattr->name) because xattr->name refers static constant names. This patch removes kfree(xattr->name) from ocfs2_mknod() and ocfs2_symlink(). Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Tested-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
alex chen authored
commit f7cf4f5b upstream. Do not put bh when buffer_uptodate failed in ocfs2_write_block and ocfs2_write_super_or_backup, because it will put bh in b_end_io. Otherwise it will hit a warning "VFS: brelse: Trying to free free buffer". Signed-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Junxiao Bi authored
commit ded2cf71 upstream. There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Junxiao Bi authored
commit 34aa8dac upstream. This issue was introduced by commit 800deef3 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by:
-
Serge Hallyn authored
commit ea1a8217 upstream. If the glibc xattr.h header is included after the uapi header, compilation fails due to an enum re-using a #define from the uapi header. Protect against this by guarding the define and enum inclusions against each other. (See https://lists.debian.org/debian-glibc/2014/03/msg00029.html and https://sourceware.org/glibc/wiki/Synchronizing_Headers for more information.) Signed-off-by:
Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Allan McRae <allan@archlinux.org> Signed-off-by:
-
Mizuma, Masayoshi authored
commit 55f67141 upstream. When I decrease the value of nr_hugepage in procfs a lot, softlockup happens. It is because there is no chance of context switch during this process. On the other hand, when I allocate a large number of hugepages, there is some chance of context switch. Hence softlockup doesn't happen during this process. So it's necessary to add the context switch in the freeing process as same as allocating process to avoid softlockup. When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing process occupied a CPU over 150 seconds and following softlockup message appeared twice or more. $ echo 6000000 > /proc/sys/vm/nr_hugepages $ cat /proc/sys/vm/nr_hugepages 6000000 $ grep ^Huge /proc/meminfo HugePages_Total: 6000000 HugePages_Free: 6000000 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB $ echo 0 > /proc/sys/vm/nr_hugepages BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ... Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1 Call Trace: free_pool_huge_page+0xb8/0xd0 set_max_huge_pages+0x128/0x190 hugetlb_sysctl_handler_common+0x113/0x140 hugetlb_sysctl_handler+0x1e/0x20 proc_sys_call_handler+0x97/0xd0 proc_sys_write+0x14/0x20 vfs_write+0xb8/0x1a0 sys_write+0x51/0x90 __audit_syscall_exit+0x265/0x290 system_call_fastpath+0x16/0x1b I have not confirmed this problem with upstream kernels because I am not able to prepare the machine equipped with 12TB memory now. However I confirmed that the amount of decreasing hugepages was directly proportional to the amount of required time. I measured required times on a smaller machine. It showed 130-145 hugepages decreased in a millisecond. Amount of decreasing Required time Decreasing rate hugepages (msec) (pages/msec) ------------------------------------------------------------ 10,000 pages == 20GB 70 - 74 135-142 30,000 pages == 60GB 208 - 229 131-144 It means decrement of 6TB hugepages will trigger softlockup with the default threshold 20sec, in this decreasing rate. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Vlastimil Babka authored
commit 57e68e9c upstream. A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin fuzzing with trinity. The call site try_to_unmap_cluster() does not lock the pages other than its check_page parameter (which is already locked). The BUG_ON in mlock_vma_page() is not documented and its purpose is somewhat unclear, but apparently it serializes against page migration, which could otherwise fail to transfer the PG_mlocked flag. This would not be fatal, as the page would be eventually encountered again, but NR_MLOCK accounting would become distorted nevertheless. This patch adds a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that effect. The call site try_to_unmap_cluster() is fixed so that for page != check_page, trylock_page() is attempted (to avoid possible deadlocks as we already have check_page locked) and mlock_vma_page() is performed only upon success. If the page lock cannot be obtained, the page is left without PG_mlocked, which is again not a problem in the whole unevictable memory design. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Johannes Weiner authored
commit 3a025760 upstream. On NUMA systems, a node may start thrashing cache or even swap anonymous pages while there are still free pages on remote nodes. This is a result of commits 81c0a2bb ("mm: page_alloc: fair zone allocator policy") and fff4068c ("mm: page_alloc: revert NUMA aspect of fair allocation policy"). Before those changes, the allocator would first try all allowed zones, including those on remote nodes, before waking any kswapds. But now, the allocator fastpath doubles as the fairness pass, which in turn can only consider the local node to prevent remote spilling based on exhausted fairness batches alone. Remote nodes are only considered in the slowpath, after the kswapds are woken up. But if remote nodes still have free memory, kswapd should not be woken to rebalance the local node or it may thrash cash or swap prematurely. Fix this by adding one more unfair pass over the zonelist that is allowed to spill to remote nodes after the local fairness pass fails but before entering the slowpath and waking the kswapds. This also gets rid of the GFP_THISNODE exemption from the fairness protocol because the unfair pass is no longer tied to kswapd, which GFP_THISNODE is not allowed to wake up. However, because remote spills can be more frequent now - we prefer them over local kswapd reclaim - the allocation batches on remote nodes could underflow more heavily. When resetting the batches, use atomic_long_read() directly instead of zone_page_state() to calculate the delta as the latter filters negative counter values. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Matt Fleming authored
commit a0c32761 upstream. Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Felipe Franciosi authored
commit 368c89d7 upstream. If the buffers are unmapped after completing a request, then stale data might be in the request. Signed-off-by:
Felipe Franciosi <felipe@paradoxo.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Felipe Franciosi authored
commit 1044b1bb upstream. We need to set the queue bounce limit during the device initialization to prevent excessive bouncing on 32 bit architectures. Signed-off-by:
-
Alan Stern authored
commit 6aec044c upstream. When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
"Poulain, Loic" <loic.poulain@intel.com> Signed-off-by:
-
Michal Simek authored
commit ead5178b upstream. Add new ulpi IDs which are available on Xilinx Zynq boards. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Paul Gortmaker authored
commit f76a1cbe upstream. Commit 3e6c6f63 ("Delay creation of khcvd thread") moved the call of hvc_init from being a device_initcall into hvc_alloc, and used a non-null hvc_driver as indication of whether hvc_init had already been called. The problem with this is that hvc_driver is only assigned a value at the bottom of hvc_init, and so there is a window where multiple hvc_alloc calls can be in progress at the same time and hence try and call hvc_init multiple times. Previously the use of device_init guaranteed that hvc_init was only called once. This manifests itself as sporadic instances of two hvc_init calls racing each other, and with the loser of the race getting -EBUSY from tty_register_driver() and hence that virtual console fails: Couldn't register hvc console driver virtio-ports vport0p1: error -16 allocating hvc for port Here we add an atomic_t to guarantee we'll never run hvc_init twice. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 3e6c6f63 ("Delay creation of khcvd thread") Reported-by:
Jim Somerville <Jim.Somerville@windriver.com> Tested-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Felipe Balbi authored
commit eee3f15d upstream. instead of relying on the otg pointer, which can be NULL in certain cases, we can use the gadget and host pointers we already hold inside struct musb. Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit 61018305 upstream. commit 388e5c51 (usb: dwc3: remove dwc3 dependency on host AND gadget.) created the possibility for host-only and peripheral-only dwc3 builds but left a possible randconfig build error when host-only builds are selected. Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
-
Huang Rui authored
commit 06f9b6e5 upstream. Around DWC USB3 2.30a release another bit has been added to the Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield. Because of that, what used to be 8 bits long, has become 9 bits long. Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits not 8 bits. And the following reserved field uses [31:25] bits not [31:24] bits, and it has 7 bits. So in dwc3_event_devt, the bit mask should be: event_info [24:16] 9 bits reserved31_25 [31:25] 7 bits This patch makes sure that newer core releases will work fine with Linux and that we will decode the event information properly on new core releases. [ balbi@ti.com : improve commit log a bit ] Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Wolfram Sang authored
commit 61f03191 upstream. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Florian Vaussard authored
commit 8b57b966 upstream. Commit 3fdfedaa "[media] omap3isp: preview: Lower the crop margins" accidentally changed the previewer's cropping, causing the previewer to miss four pixels on each line, thus corrupting the final image. Restored the removed setting. Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
commit 30d65282 upstream. Do not attempt to reload the tuner modules when resuming after a suspend. This triggers a WARN_ON in kernel/kmod.c:148 __request_module. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581. This has always been wrong, but it was never noticed until the WARN_ON was added in 3.9. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Antti Palosaari authored
commit 3ec40dcf upstream. Pointer to device state has been moved to different location during some change. PCTV 290e LNA function still uses old pointer, carried over FE priv, and it crash. Reported-by:
Janne Kujanpää <jikuja@iki.fi> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Malcolm Priestley authored
commit 3c8023a7 upstream. The m88rs2000 frontend is always auto inversion. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Malcolm Priestley authored
commit 8272d0a0 upstream. Add m88rs2000_get_tune_settings, min delay of 2000 ms on symbol rate more than 3000000 and delay of 3000ms less than this. Adding min delay prevents crashing the frontend on continuous transponder scans. Other dvb_frontend_tune_settings remain as default. This makes very little time difference to good channel scans, but slows down the set frontend where lock can never be achieved i.e. DVB-S2. Signed-off-by:
-
Hans Verkuil authored
commit bc826d6e upstream. The wrong ioctl numbers were used due to a copy-and-paste error. Signed-off-by:
-
Hans Verkuil authored
commit c4885ada upstream. I completely forgot to add them when I made this module. Loading this module without it will taint the kernel, which is not intended. Signed-off-by:
-
Antoine Ténart authored
commit 7d3477d8 upstream. If no driver takeover the atmel_lcdfb, the lcd won't be in a working state since atmel_lcdfb_set_par() will never be called. Enabling a driver which does, like fbcon, will call the function and put atmel_lcdfb in a working state. Fixes: b985172b (video: atmel_lcdfb: add device tree suport) Signed-off-by:
Antoine Ténart <antoine.tenart@free-electrons.com> Reported-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Hans Verkuil authored
commit aee786ac upstream. bt->width should be (bt)->width, and same for the other fields. Signed-off-by:
-
Oleksij Rempel authored
commit b1e43f23 upstream. The UVC specification uses alternate setting selection to notify devices of stream start/stop. This breaks when using bulk-based devices, as the video streaming interface has a single alternate setting in that case, making video stream start and video stream stop events to appear identical to the device. Bulk-based devices are thus not well supported by UVC. The webcam built in the Asus Zenbook UX302LA ignores the set interface request and will keep the video stream enabled when the driver tries to stop it. If USB autosuspend is enabled the device will then be suspended and will crash, requiring a cold reboot. USB trace capture showed that Windows sends a CLEAR_FEATURE(HALT) request to the bulk endpoint when stopping the stream instead of selecting alternate setting 0. The camera then behaves correctly, and thus seems to require that behaviour. Replace selection of alternate setting 0 with clearing of the endpoint halt feature at video stream stop for bulk-based devices. Let's refrain from blaming Microsoft this time, as it's not clear whether this Windows-specific but USB-compliant behaviour was specifically developed to handle bulkd-based UVC devices, or if the camera just took advantage of it. Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
David Cohen authored
commit 01bb59eb upstream. When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841 "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Denis Turischev authored
commit c09ec25d upstream. The same issue like with Panther Point chipsets. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS have work around for this, but not all. One example is Compulab's mini-desktop, the Intense-PC2. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. This patch should be backported to stable kernels as old as 3.12, that contain the commit 638298dc "xhci: Fix spurious wakeups after S5 on Haswell" Signed-off-by:
Denis Turischev <denis@compulab.co.il> Signed-off-by:
-
Mathias Nyman authored
commit bcffae77 upstream. xHCI driver has its own pci probe function that will call usb_hcd_pci_probe to register its usb-2 bus, and then continue to manually register the usb-3 bus. usb_hcd_pci_probe does a pm_runtime_put_noidle at the end and might thus trigger a runtime suspend before the usb-3 bus is ready. Prevent the runtime suspend by increasing the usage count in the beginning of xhci_pci_probe, and decrease it once the usb-3 bus is ready. xhci-platform driver is not using usb_hcd_pci_probe to set up busses and should not need to have it's usage count increased during probe. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
commit 9c1b7036 upstream. It was impossible to enumerate on a SuperSpeed (XHCI) host with alternate setting = 1 due to the wrongly set 'bMaxBurst' field in the SuperSpeed Endpoint Companion descriptor. Testcase: <host> modprobe -r usbtest; modprobe usbtest alt=1 <device> modprobe g_zero plug device to SuperSpeed port on the host. Without this patch the host always complains like so "usb 12-2: Not enough bandwidth for new device state. usb 12-2: Not enough bandwidth for altsetting 1" Bug was introduced by commit cf9a08ae in v3.9 Fixes: cf9a08ae (usb: gadget: convert source sink and loopback to new function interface) Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Gregory CLEMENT authored
commit d8eb6c65 upstream. commit 511f3c53 (usb: gadget: udc-core: fix a regression during gadget driver unbinding) introduced a crash when DEBUG is enabled. The debug trace in the atmel_usba_stop function made the assumption that the driver pointer passed in parameter was not NULL, but since the commit above, such assumption was no longer always true. This commit now uses the driver pointer stored in udc which fixes this issue. [ balbi@ti.com : improved commit log a bit ] Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Kees Cook authored
commit aba37fd9 upstream. This makes sure that the name coming out of configfs cannot be used accidentally as a format string. Signed-off-by:
-
