- 11 Mar, 2014 9 commits
-
-
Stanislaw Gruszka authored
commit b6213e41 upstream. This patch fixes regression caused by commit a16dad77 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391Reported-by:
Petr Pisar <petr.pisar@atlas.cz> Bisected-by:
Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by:
Stanislaw Gruszka <stf_xl@wp.pl> Acked-by:
Larry Finger <Larry.Finger@lwfinger.next> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 5d81de8e upstream. It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Reviewed-by:
Pavel Shilovsky <piastry@etersoft.ru> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Chen Gang authored
commit 8d80390c upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by:
-
Paul Gortmaker authored
commit 5745d6a4 upstream. Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Vinayak Kale authored
commit 39544ac9 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by:
Vinayak Kale <vkale@apm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit bae0ca2b upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by:
Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Theodore Ts'o authored
commit 19ea8060 upstream. If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f3835 ("ext4: Add nanosecond timestamps") Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 3d2660d0 upstream. The set_flexbg_block_bitmap() function assumed that the number of blocks in a blockgroup was sb->blocksize * 8, which is normally true, but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block bitmap corruption after: mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G Signed-off-by:
Jon Bernard <jbernard@tuxion.com> Signed-off-by:
-
Theodore Ts'o authored
commit 23301410 upstream. If an ext4 file system is created by some tool other than mke2fs (perhaps by someone who has a pathalogical fear of the GPL) that doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags, and that file system is then mounted read-only, don't try to modify the s_flags field. Otherwise, if dm_verity is in use, the superblock will change, causing an dm_verity failure. Signed-off-by:
-
- 22 Feb, 2014 26 commits
-
-
Greg Kroah-Hartman authored
-
Paul Gortmaker authored
commit 2c45aada upstream. In allmodconfig builds for sparc and any other arch which does not set CONFIG_SPARSE_IRQ, the following will be seen at modpost: CC [M] lib/cpu-notifier-error-inject.o CC [M] lib/pm-notifier-error-inject.o ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined! make[2]: *** [__modpost] Error 1 This happens because commit 3911ff30 ("genirq: export handle_edge_irq() and irq_to_desc()") added one export for it, but there were actually two instances of it, in an if/else clause for CONFIG_SPARSE_IRQ. Add the second one. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit d651aa1d upstream. Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on that page use a 27 bit delta against that timestamp in order to save on bits written to the ring buffer. If the time between events is larger than what the 27 bits can hold, a "time extend" event is added to hold the entire 64 bit timestamp again and the events after that hold a delta from that timestamp. As a "time extend" is always paired with an event, it is logical to just allocate the event with the time extend, to make things a bit more efficient. Unfortunately, when the pairing code was written, it removed the "delta = 0" from the first commit on a page, causing the events on the page to be slightly skewed. Fixes: 69d1b839 "ring-buffer: Bind time extend and data events together" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit ac323d8d upstream. Fix NULL pointer dereference of "chip->pdata" if platform_data was not supplied to the driver. The driver during probe stored the pointer to the platform_data: chip->pdata = client->dev.platform_data; Later it was dereferenced in max17040_get_online() and max17040_get_status(). If platform_data was not supplied, the NULL pointer exception would happen: [ 6.626094] Unable to handle kernel of a at virtual address 00000000 [ 6.628557] pgd = c0004000 [ 6.632868] [00000000] *pgd=66262564 [ 6.634636] Unable to handle kernel paging request at virtual address e6262000 [ 6.642014] pgd = de468000 [ 6.644700] [e6262000] *pgd=00000000 [ 6.648265] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 6.653552] Modules linked in: [ 6.656598] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 3.10.14-02717-gc58b4b4 #505 [ 6.664334] Workqueue: events max17040_work [ 6.668488] task: dfa11b80 ti: df9f6000 task.ti: df9f6000 [ 6.673873] PC is at show_pte+0x80/0xb8 [ 6.677687] LR is at show_pte+0x3c/0xb8 [ 6.681503] pc : [<c001b7b8>] lr : [<c001b774>] psr: 600f0113 [ 6.681503] sp : df9f7d58 ip : 600f0113 fp : 00000009 [ 6.692965] r10: 00000000 r9 : 00000000 r8 : dfa11b80 [ 6.698171] r7 : df9f7ea0 r6 : e6262000 r5 : 00000000 r4 : 00000000 [ 6.704680] r3 : 00000000 r2 : e6262000 r1 : 600f0193 r0 : c05b3750 [ 6.711194] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 6.718485] Control: 10c53c7d Table: 5e46806a DAC: 00000015 [ 6.724218] Process kworker/0:1 (pid: 31, stack limit = 0xdf9f6238) [ 6.730465] Stack: (0xdf9f7d58 to 0xdf9f8000) [ 6.914325] [<c001b7b8>] (show_pte+0x80/0xb8) from [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74) [ 6.923425] [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74) from [<c001bb7c>] (do_page_fault+0x2c4/0x360) [ 6.933144] [<c001bb7c>] (do_page_fault+0x2c4/0x360) from [<c0008400>] (do_DataAbort+0x34/0x9c) [ 6.941825] [<c0008400>] (do_DataAbort+0x34/0x9c) from [<c000e5d8>] (__dabt_svc+0x38/0x60) [ 6.950058] Exception stack(0xdf9f7ea0 to 0xdf9f7ee8) [ 6.955099] 7ea0: df0c1790 00000000 00000002 00000000 df0c1794 df0c1790 df0c1790 00000042 [ 6.963271] 7ec0: df0c1794 00000001 00000000 00000009 00000000 df9f7ee8 c0306268 c0306270 [ 6.971419] 7ee0: a00f0113 ffffffff [ 6.974902] [<c000e5d8>] (__dabt_svc+0x38/0x60) from [<c0306270>] (max17040_work+0x8c/0x144) [ 6.983317] [<c0306270>] (max17040_work+0x8c/0x144) from [<c003f364>] (process_one_work+0x138/0x440) [ 6.992429] [<c003f364>] (process_one_work+0x138/0x440) from [<c003fa64>] (worker_thread+0x134/0x3b8) [ 7.001628] [<c003fa64>] (worker_thread+0x134/0x3b8) from [<c00454bc>] (kthread+0xa4/0xb0) [ 7.009875] [<c00454bc>] (kthread+0xa4/0xb0) from [<c000eb28>] (ret_from_fork+0x14/0x2c) [ 7.017943] Code: e1a03005 e2422480 e0826104 e59f002c (e7922104) [ 7.024017] ---[ end trace 73bc7006b9cc5c79 ]--- Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: c6f4a42dSigned-off-by:
-
Mikulas Patocka authored
commit 80d767d7 upstream. When compiling for the IA-64 ski emulator, HZ is set to 32 because the emulation is slow and we don't want to waste too many cycles processing timers. Alpha also has an option to set HZ to 32. This causes integer underflow in kernel/time/jiffies.c: kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] .mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */ ^ This patch reduces the JIFFIES_SHIFT value to avoid the overflow. Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Oleg Nesterov authored
commit 789b5e03 upstream. Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Interestingly, the raid5 code can actually prevent double initialization and hence can use the following simplified form of callback registration: register_cpu_notifier(&foobar_cpu_notifier); get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); put_online_cpus(); A hotplug operation that occurs between registering the notifier and calling get_online_cpus(), won't disrupt anything, because the code takes care to perform the memory allocations only once. So reorganize the code in raid5 this way to fix the deadlock with callback registration. Cc: linux-raid@vger.kernel.org Fixes: 36d1c647Signed-off-by:
Oleg Nesterov <oleg@redhat.com> [Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the free_scratch_buffer() helper to condense code further and wrote the changelog.] Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Dan Carpenter authored
commit aac5c422 upstream. If kvm_io_bus_register_dev() fails then it returns success but it should return an error code. I also did a little cleanup like removing an impossible NULL test. Fixes: 2b3c246a ('KVM: Make coalesced mmio use a device per zone') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 2f75e12c upstream. Research has shown that commit a77fcf89 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Jens Axboe authored
commit c8123f8c upstream. When mkfs issues a full device discard and the device only supports discards of a smallish size, we can loop in blkdev_issue_discard() for a long time. If preempt isn't enabled, this can turn into a softlock situation and the kernel will start complaining. Add an explicit cond_resched() at the end of the loop to avoid that. Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Jan Moskyto Matejka authored
commit 03b56329 upstream. Commit afe2dab4 ("USB: add hex/bcd detection to usb modalias generation") changed the routine that generates alias ranges. Before that change, only digits 0-9 were supported; the commit tried to fix the case when the range includes higher values than 0x9. Unfortunately, the commit didn't fix the case when the range includes both 0x9 and 0xA, meaning that the final range must look like [x-9A-y] where x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced. Modprobe doesn't complain as it sees no difference between no-match and bad-pattern results of fnmatch(). Fixing this simple bug to fix the aliases. Also changing the hardcoded beginning of the range to uppercase as all the other letters are also uppercase in the device version numbers. Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK. Signed-off-by:
Jan Moskyto Matejka <mq@suse.cz> Signed-off-by:
-
Raymond Wanyoike authored
commit 3635c7e2 upstream. Interface #5 of 19d2:1270 is a net interface which has been submitted to the qmi_wwan driver so consequently remove it from the option driver. Signed-off-by:
Raymond Wanyoike <raymond.wanyoike@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 823d12c9 upstream. People sometimes create their own custom-configured kernels and forget to enable CONFIG_SCSI_MULTI_LUN. This causes problems when they plug in a USB storage device (such as a card reader) with more than one LUN. Fortunately, we can tell fairly easily when a storage device claims to have more than one LUN. When that happens, this patch asks the SCSI layer to probe all the LUNs automatically, regardless of the config setting. The patch also updates the Kconfig help text for usb-storage, explaining that CONFIG_SCSI_MULTI_LUN may be necessary. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Thomas Raschbacher <lordvan@lordvan.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Alan Stern authored
commit a9c143c8 upstream. The Cypress ATACB unusual-devs entry for the Super Top SATA bridge causes problems. Although it was originally reported only for bcdDevice = 0x160, its range was much larger. This resulted in a bug report for bcdDevice 0x220, so the range was capped at 0x219. Now Milan reports errors with bcdDevice 0x150. Therefore this patch restricts the range to just 0x160. Signed-off-by:
Milan Svoboda <milan.svoboda@centrum.cz> Signed-off-by:
-
Alan Stern authored
commit c5637e51 upstream. This patch adds an unusual-devs entry for the BlackBerry 9000. This fixes Bugzilla #22442. Signed-off-by:
Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> Tested-by:
-
Ulrich Hahn authored
commit 76f24e3f upstream. Adding two more IDs to the ftdi_sio usb serial driver. It now connects Tagsys RFID readers. There might be more IDs out there for other Tagsys models. Signed-off-by:
Ulrich Hahn <uhahn@eanco.de> Cc: Johan Hovold <johan@hovold.com> Signed-off-by:
-
Bjørn Mork authored
commit 67847bae upstream. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Hartmut Knaack authored
commit 38408d05 upstream. Only free an IRQ in error_free_irq, if it has been requested previously. Signed-off-by:
Hartmut Knaack <knaack.h@gmx.de> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Lars Poeschel authored
commit 3ac06b90 upstream. 3GPP TS 07.10 states in section 5.4.6.3.7: "The length byte contains the value 2 or 3 ... depending on the break signal." The break byte is optional and if it is sent, the length is 3. In fact the driver was not able to work with modems that send this break byte in their modem status control message. If the modem just sends the break byte if it is really set, then weird things might happen. The code for deconding the modem status to the internal linux presentation in gsm_process_modem has already a big comment about this 2 or 3 byte length thing and it is already able to decode the brk, but the code calling the gsm_process_modem function in gsm_control_modem does not encode it and hand it over the right way. This patch fixes this. Without this fix if the modem sends the brk byte in it's modem status control message the driver will hang when opening a muxed channel. Signed-off-by:
Lars Poeschel <poeschel@lemonage.de> Signed-off-by:
-
NeilBrown authored
commit 2ec197db upstream. If an NFS client attempts to get a lock (using NLM) and the lock is not available, the server will remember the request and when the lock becomes available it will send a GRANT request to the client to provide the lock. If the client already held an adjacent lock, the GRANT callback will report the union of the existing and new locks, which can confuse the client. This happens because __posix_lock_file (called by vfs_lock_file) updates the passed-in file_lock structure when adjacent or over-lapping locks are found. To avoid this problem we take a copy of the two fields that can be changed (fl_start and fl_end) before the call and restore them afterwards. An alternate would be to allocate a 'struct file_lock', initialise it, use locks_copy_lock() to take a copy, then locks_release_private() after the vfs_lock_file() call. But that is a lot more work. Reported-by:
Olaf Kirch <okir@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Paul Bolle authored
commit 5bbb2ae3 upstream. bind_get() checks the device number it is called with. It uses MAX_RAW_MINORS for the upper bound. But MAX_RAW_MINORS is set at compile time while the actual number of raw devices can be set at runtime. This means the test can either be too strict or too lenient. And if the test ends up being too lenient bind_get() might try to access memory beyond what was allocated for "raw_devices". So check against the runtime value (max_raw_minors) in this function. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
commit 1f802f82 upstream. This reverts commit e120cc0d. It causes a NULL pointer dereference with drivers using the generic spi_transfer_one_message(), which always calls spi_finalize_current_message(), which zeroes master->cur_msg. Drivers implementing transfer_one_message() theirselves must always call spi_finalize_current_message(), even if the transfer failed: * @transfer_one_message: the subsystem calls the driver to transfer a single * message while queuing transfers that arrive in the meantime. When the * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * transfer Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Martin Schwidefsky authored
commit 8d7f6690 upstream. The kernel currently crashes with a low-address-protection exception if a user space process executes an instruction that tries to use the linkage stack. Set the base-ASTE origin and the subspace-ASTE origin of the dispatchable-unit-control-table to point to a dummy ASTE. Set up control register 15 to point to an empty linkage stack with no room left. A user space process with a linkage stack instruction will still crash but with a different exception which is correctly translated to a segmentation fault instead of a kernel oops. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
commit d7736ff5 upstream. Dumps created by kdump or zfcpdump can contain invalid memory holes when dumping z/VM systems that have memory pressure. For example: # zgetdump -i /proc/vmcore. Memory map: 0000000000000000 - 0000000000bfffff (12 MB) 0000000000e00000 - 00000000014fffff (7 MB) 000000000bd00000 - 00000000f3bfffff (3711 MB) The memory detection function find_memory_chunks() issues tprot to find valid memory chunks. In case of CMM it can happen that pages are marked as unstable via set_page_unstable() in arch_free_page(). If z/VM has released that pages, tprot returns -EFAULT and indicates a memory hole. So fix this and switch off CMM in case of kdump or zfcpdump. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Johannes Berg authored
commit 338f977f upstream. The "new" fragmentation code (since my rewrite almost 5 years ago) erroneously sets skb->len rather than using skb_trim() to adjust the length of the first fragment after copying out all the others. This leaves the skb tail pointer pointing to after where the data originally ended, and thus causes the encryption MIC to be written at that point, rather than where it belongs: immediately after the data. The impact of this is that if software encryption is done, then a) encryption doesn't work for the first fragment, the connection becomes unusable as the first fragment will never be properly verified at the receiver, the MIC is practically guaranteed to be wrong b) we leak up to 8 bytes of plaintext (!) of the packet out into the air This is only mitigated by the fact that many devices are capable of doing encryption in hardware, in which case this can't happen as the tail pointer is irrelevant in that case. Additionally, fragmentation is not used very frequently and would normally have to be configured manually. Fix this by using skb_trim() properly. Fixes: 2de8e0d9 ("mac80211: rewrite fragmentation") Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Eric W. Biederman authored
commit 96c7a2ff upstream. Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Cong Wang <cwang@twopensource.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Vrabel authored
commit 36613717 upstream. Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
- 20 Feb, 2014 5 commits
-
-
Greg Kroah-Hartman authored
-
Jeff Layton authored
commit 3dd4765f upstream. ...and ensure that we tear down the nfs_commit_data cache too when unloading the module. Cc: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: drop the nfs_cdata_cachep cleanup; it doesn't exist] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Dan Rosenberg authored
commit 3715c530 upstream. When using ALT+SysRq+Q all the pointers are replaced with "pK-error" like this: [23153.208033] .base: pK-error with echo h > /proc/sysrq-trigger it works: [23107.776363] .base: ffff88023e60d540 The intent behind this behavior was to return "pK-error" in cases where the %pK format specifier was used in interrupt context, because the CAP_SYSLOG check wouldn't be meaningful. Clearly this should only apply when kptr_restrict is actually enabled though. Reported-by:
Stevie Trujillo <stevie.trujillo@gmail.com> Signed-off-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by:
-
Asias He authored
commit 2c95a329 upstream. Block layer will allocate a spinlock for the queue if the driver does not provide one in blk_init_queue(). The reason to use the internal spinlock is that blk_cleanup_queue() will switch to use the internal spinlock in the cleanup code path. if (q->queue_lock != &q->__queue_lock) q->queue_lock = &q->__queue_lock; However, processes which are in D state might have taken the driver provided spinlock, when the processes wake up, they would release the block provided spinlock. ===================================== [ BUG: bad unlock balance detected! ] 3.4.0-rc7+ #238 Not tainted ------------------------------------- fio/3587 is trying to release lock (&(&q->__queue_lock)->rlock) at: [<ffffffff813274d2>] blk_queue_bio+0x2a2/0x380 but there are no more locks to release! other info that might help us debug this: 1 lock held by fio/3587: #0: (&(&vblk->lock)->rlock){......}, at: [<ffffffff8132661a>] get_request_wait+0x19a/0x250 Other drivers use block layer provided spinlock as well, e.g. SCSI. Switching to the block layer provided spinlock saves a bit of memory and does not increase lock contention. Performance test shows no real difference is observed before and after this patch. Changes in v2: Improve commit log as Michael suggested. Cc: virtualization@lists.linux-foundation.org Cc: kvm@vger.kernel.org Signed-off-by:
Asias He <asias@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Seth Forshee authored
commit c0394506 upstream. The touchpad on the Acer Aspire One D250 will report out of range values in the extreme lower portion of the touchpad. These appear as abrupt changes in the values reported by the hardware from very low values to very high values, which can cause unexpected vertical jumps in the position of the mouse pointer. What seems to be happening is that the value is wrapping to a two's compliment negative value of higher resolution than the 13-bit value reported by the hardware, with the high-order bits being truncated. This patch adds handling for these values by converting them to the appropriate negative values. The only tricky part about this is deciding when to treat a number as negative. It stands to reason that if out of range values can be reported on the low end then it could also happen on the high end, so not all out of range values should be treated as negative. The approach taken here is to split the difference between the maximum legitimate value for the axis and the maximum possible value that the hardware can report, treating values greater than this number as negative and all other values as positive. This can be tweaked later if hardware is found that operates outside of these parameters. BugLink: http://bugs.launchpad.net/bugs/1001251Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
