We can reorder the busy wait loop at the start of the Flow Director
transmit function to reduce the overall code size while still retaining the
same functionality.  As such I am taking advantage of the opportunity to do
so.

Change-ID: I34c403ca001953c6ac9816e65d5305e73d869026
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a problem in the client interface that
was causing random stack traces in RDMA driver load and
unload tests.  This patch fixes the problem by checking
for an existing client before trying to open it.  Without
this patch, there is a timing related null pointer deref.

Change-ID: Ib73d30671a27f6f9770dd53b3e5292b88d6b62da
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Some of the pr_* messages are missing spaces, so insert these and also
unbreak multi-line literal strings in pr_* messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: small driver update

For details, see individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do this so the sysfs has "device" link correctly set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do this so the sysfs has "device" link correctly set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far, mlxsw_pci.ko is the module that registers PCI table for all
drivers (spectrum and switchx2). That is problematic for example with
dracut. Since mlxsw_spectrum.ko and mlxsw_switchx2.ko are loaded
dynamically from within mlxsw_core.ko, dracut does not have track of
them and avoids them from being included in initramfs.

So make this in an ordinary way and define the PCI tables in individual
driver modules, so it can be properly loaded and included in dracut
initramfs image. As a side effect, this patch could remove no longer
necessary driver "kind" strings which were used to link PCI ids with
individual mlxsw drivers.
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pci.h needs to be used for inner function declarations. So move the
original one to more appropriate name, pci_hw.h.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2016-10-25

Just a leftover from the last development cycle.

1) Remove some unused code, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

No one can see these events, because a network namespace can not be
destroyed, if it has sockets.

Unlike other devices, uevent-s for network devices are generated
only inside their network namespaces. They are filtered in
kobj_bcast_filter()

My experiments shows that net namespaces are destroyed more 30% faster
with this optimization.

Here is a perf output for destroying network namespaces without this
patch.

-   94.76%     0.02%  kworker/u48:1  [kernel.kallsyms]     [k] cleanup_net
   - 94.74% cleanup_net
      - 94.64% ops_exit_list.isra.4
         - 41.61% default_device_exit_batch
            - 41.47% unregister_netdevice_many
               - rollback_registered_many
                  - 40.36% netdev_unregister_kobject
                     - 14.55% device_del
                        + 13.71% kobject_uevent
                     - 13.04% netdev_queue_update_kobjects
                        + 12.96% kobject_put
                     - 12.72% net_rx_queue_update_kobjects
                          kobject_put
                        - kobject_release
                           + 12.69% kobject_uevent
                  + 0.80% call_netdevice_notifiers_info
         + 19.57% nfsd_exit_net
         + 11.15% tcp_net_metrics_exit
         + 8.25% rpcsec_gss_exit_net

It's very critical to optimize the exit path for network namespaces,
because they are destroyed under net_mutex and many namespaces can be
destroyed for one iteration.

v2: use dev_set_uevent_suppress()

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: d894be57('ethernet: use net core MTU range checking in more drivers')
CC: Jarod Wilson <jarod@redhat.com>
CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
genetlink improvements

This series contains some generic netlink improvements, making
the API safer to use, and making the function pointers in the
family struct safer by allowing it to be __ro_after_init.

The first patch, introducing genl_family_attrbuf(), just ensures
that the users of family->attrbuf aren't actually racy, but making
them use the indirection function for obtaining a reference and
checking that the context can actually do so.

The second patch removes the more or less broken ability to have
a static family ID, the three IDs that need to be static because
it's simply needed (genl controller), or due to old API misused.
Everything else couldn't be static anyway, or could fail when the
family is registered, if somebody else already got a static ID.

The third patch statically initializes the families, mostly to save
some code. I wrote this initially because I thought I could make
them all const, but that ends up being very inefficient (it would
require always doing some kind of family -> id lookup), so now it's
just here because I had it already and it reduces the code size.

The fourth patch then, finally, lays the groundwork for what I had
really wanted - now with __ro_after_init instead of const; I remove
code there to do the ID->family hash table mapping in genetlink and
use IDR instead to both allocate and map the IDs, which again ends
up saving some code size.

Finally, the fifth patch updates all families, as it turns out, no
families exist that really dynamically register/unregister. This
last patch should perhaps be split up, I could submit it for each
subsystem separately, but it'd depend on the second and third to
go in first, so would take a while. I can do that though, if that
seems better to you.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now genl_register_family() is the only thing (other than the
users themselves, perhaps, but I didn't find any doing that)
writing to the family struct.

In all families that I found, genl_register_family() is only
called from __init functions (some indirectly, in which case
I've add __init annotations to clarifly things), so all can
actually be marked __ro_after_init.

This protects the data structure from accidental corruption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since generic netlink family IDs are small integers, allocated
densely, IDR is an ideal match for lookups. Replace the existing
hand-written hash-table with IDR for allocation and lookup.

This lets the families only be written to once, during register,
since the list_head can be removed and removal of a family won't
cause any writes.

It also slightly reduces the code size (by about 1.3k on x86-64).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of providing macros/inline functions to initialize
the families, make all users initialize them statically and
get rid of the macros.

This reduces the kernel code size by about 1.6k on x86-64
(with allyesconfig).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Static family IDs have never really been used, the only
use case was the workaround I introduced for those users
that assumed their family ID was also their multicast
group ID.

Additionally, because static family IDs would never be
reserved by the generic netlink code, using a relatively
low ID would only work for built-in families that can be
registered immediately after generic netlink is started,
which is basically only the control family (apart from
the workaround code, which I also had to add code for so
it would reserve those IDs)

Thus, anything other than GENL_ID_GENERATE is flawed and
luckily not used except in the cases I mentioned. Move
those workarounds into a few lines of code, and then get
rid of GENL_ID_GENERATE entirely, making it more robust.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This helper function allows family implementations to access
their family's attrbuf. This gets rid of the attrbuf usage
in families, and also adds locking validation, since it's not
valid to use the attrbuf with parallel_ops or outside of the
dumpit callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The user may want to use only some bits of the skb mark in
his skbedit rules because the remaining part might be used by
something else.

Introduce the "mask" parameter to the skbedit actor in order
to implement such functionality.

When the mask is specified, only those bits selected by the
latter are altered really changed by the actor, while the
rest is left untouched.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a port_type_set() is been called and the new port type set is the same
as the old one, just return success.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

firewire-net, like the older eth1394 driver, reduced the initial MTU to
less than 1500 octets if the local link layer controller's asynchronous
packet reception limit was lower.

This is bogus, since this reception limit does not have anything to do
with the transmission limit.  Neither did this reduction affect the TX
path positively, nor could it prevent link fragmentation at the RX path.

Many FireWire CardBus cards have a max_rec of 9, causing an initial MTU
of 1024 - 16 = 1008.  RFC 2734 and RFC 3146 allow a minimum max_rec = 8,
which would result in an initial MTU of 512 - 16 = 496.  On such cards,
IPv6 could only be employed if the MTU was manually increased to 1280 or
more, i.e. IPv6 would not work without intervention from userland.

We now always initialize the MTU to 1500, which is the default according
to RFC 2734 and RFC 3146.

On a VIA VT6316 based CardBus card which was affected by this, changing
the MTU from 1008 to 1500 also increases TX bandwidth by 6 %.
RX remains unaffected.

CC: netdev@vger.kernel.org
CC: linux1394-devel@lists.sourceforge.net
CC: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b3e3893e ("net: use core MTU range checking in misc drivers")
mistakenly introduced an upper limit for firewire-net's MTU based on the
local link layer controller's reception capability.  Revert this.  Neither
RFC 2734 nor our implementation impose any particular upper limit.

Actually, to be on the safe side and to make the code explicit, set
ETH_MAX_MTU = 65535 as upper limit now.

(I replaced sizeof(struct rfc2734_header) by the equivalent
RFC2374_FRAG_HDR_SIZE in order to avoid distracting long/int conversions.)

Fixes: b3e3893e('net: use core MTU range checking in misc drivers')
CC: netdev@vger.kernel.org
CC: linux1394-devel@lists.sourceforge.net
CC: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This node pointer is returned by of_get_child_by_name() with refcount
incremented in this function. of_node_put() on it before exitting this
function.

This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return error code -ENODEV from the DMA is not supported error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled, spin_lock_irqsave()
make sure always in irq disable context. So the kfree_skb()
should be replaced with dev_kfree_skb_irq().

This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the function
and data fields.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not necessary to free memory allocated with devm_kzalloc in the
remove path and using kfree leads to a double free.

Fixes: 84640e27 ("net: netcp: Add Keystone NetCP core ethernet
driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum MTU is defined via the slave devices of an batman-adv
interface. Thus it is not possible to calculate the max_mtu during the
creation of the batman-adv device when no slave devices are attached. Doing
so would for example break non-fragmentation setups which then
(incorrectly) allow an MTU of 1500 even when underlying device cannot
transport 1500 bytes + batman-adv headers.

Checking the dynamically calculated max_mtu via the minimum of the slave
devices MTU during .ndo_change_mtu is also used by the bridge interface.

Cc: Jarod Wilson <jarod@redhat.com>
Fixes: b3e3893e ("net: use core MTU range checking in misc drivers")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xo Wang says:

====================
Broadcom BCM54612E support

This series is based on tip of torvalds/master.

The first patch adds register definitions from Broadcom docs.

The second patch adds the BCM54612E PHY ID, flags, and device-specific
RGMII internal delay initialization.

I tested on a custom board with an Aspeed AST2500 SOC with its second
MAC connected to this PHY.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This PHY has internal delays enabled after reset. This clears the
internal delay enables unless the interface specifically requests them.
Signed-off-by: Xo Wang <xow@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the RXD-to-RXC skew (delay) time bit in the Miscellaneous Control
shadow register and a mask for the shadow selector field.

Remove a re-definition of MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL.
Signed-off-by: Xo Wang <xow@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I prepared commit d250a5f9 ("pkt_sched: gen_estimator: Dont
report fake rate estimators"), htb still had an implicit rate estimator
for all its classes.

Then later, I made this rate estimator optional in commit 64153ce0
("net_sched: htb: do not setup default rate estimators"), but I forgot
to update htb use of gnet_stats_copy_rate_est()

After this patch, "tc -s qdisc ..." no longer report fake rate
estimators for HTB classes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In criu we are actively using diag interface to collect sockets
present in the system when dumping applications. And while for
unix, tcp, udp[lite], packet, netlink it works as expected,
the raw sockets do not have. Thus add it.

v2:
 - add missing sock_put calls in raw_diag_dump_one (by eric.dumazet@)
 - implement @destroy for diag requests (by dsa@)

v3:
 - add export of raw_abort for IPv6 (by dsa@)
 - pass net-admin flag into inet_sk_diag_fill due to
   changes in net-next branch (by dsa@)

v4:
 - use @pad in struct inet_diag_req_v2 for raw socket
   protocol specification: raw module carries sockets
   which may have custom protocol passed from socket()
   syscall and sole @sdiag_protocol is not enough to
   match underlied ones
 - start reporting protocol specifed in socket() call
   when sockets are raw ones for the same reason: user
   space tools like ss may parse this attribute and use
   it for socket matching

v5 (by eric.dumazet@):
 - use sock_hold in raw_sock_get instead of atomic_inc,
   we're holding (raw_v4_hashinfo|raw_v6_hashinfo)->lock
   when looking up so counter won't be zero here.

v6:
 - use sdiag_raw_protocol() helper which will access @pad
   structure used for raw sockets protocol specification:
   we can't simply rename this member without breaking uapi

v7:
 - sine sdiag_raw_protocol() helper is not suitable for
   uapi lets rather make an alias structure with proper
   names. __check_inet_diag_req_raw helper will catch
   if any of structure unintentionally changed.

CC: David S. Miller <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Ahern <dsa@cumulusnetworks.com>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrey Vagin <avagin@openvz.org>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The field is initialized by ILA and MPLS but never used. Remove it.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_mutex can be locked for a long time. It may be because many
namespaces are being destroyed or many processes decide to create
a network namespace.

Both these operations are heavy, so it is better to have an ability to
kill a process which is waiting net_mutex.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

META_COLLECTOR int_vlan_tag() assumes that if the accel tag (vlan_tci)
is zero, then no vlan accel tag is present.

This is incorrect for zero VID vlan accel packets, making the following
match fail:
  tc filter add ... basic match 'meta(vlan mask 0xfff eq 0)' ...

Apparently 'int_vlan_tag' was implemented prior VLAN_TAG_PRESENT was
introduced in 05423b24 "vlan: allow null VLAN ID to be used"
(and at time introduced, the 'vlan_tx_tag_get' call in em_meta was not
 adapted).

Fix, testing skb_vlan_tag_present instead of testing skb_vlan_tag_get's
value.

Fixes: 05423b24 ("vlan: allow null VLAN ID to be used")
Fixes: 1a31f204 ("netsched: Allow meta match on vlan tag on receive")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Driver update

Mostly cosmetics and small resource values management rewrite.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the number of resources is going to get much bigger, ease up the
addition by simly defining IDs. Convert the existing structure members
to a set array, one for validity, one for values. Introduce a set of
getters and setters for easy access.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>