- 30 Apr, 2016 40 commits
-
-
Asai Thambi SP authored
commit e35b9473 upstream. Remove setting and clearing MTIP_PF_EH_ACTIVE_BIT flag in mtip_handle_tfe() as they are redundant. Also avoid waking up service thread from mtip_handle_tfe() because it is already woken up in case of taskfile error. Signed-off-by:
Selvan Mani <smani@micron.com> Signed-off-by:
Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by:
Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Asai Thambi SP authored
commit cfc05bd3 upstream. Service thread does not detect the need for taskfile error hanlding. Fixed the flag condition to process taskfile error. Signed-off-by:
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mateusz Guzik authored
commit 2e83b79b upstream. This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Or Gerlitz authored
commit 6b6c07bd upstream. The command timeout is terribly long, whole two hours. Make it 60s so if things do go wrong, the user gets feedback in relatively short time, so they can take corrective actions and/or investigate using tools and such. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
J. Bruce Fields authored
commit 4aed9c46 upstream. A number of spots in the xdr decoding follow a pattern like n = be32_to_cpup(p++); READ_BUF(n + 4); where n is a u32. The only bounds checking is done in READ_BUF itself, but since it's checking (n + 4), it won't catch cases where n is very large, (u32)(-4) or higher. I'm not sure exactly what the consequences are, but we've seen crashes soon after. Instead, just break these up into two READ_BUF()s. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 10e7ac22 upstream. Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up watchdog/rc32434_wdt to do return copy_to_user(...)) ? -EFAULT : 0; instead. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Hans de Goede authored
commit 5c915c68 upstream. On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max size results in a solid green rectangle being captured (all colors 0 in YUV). This turns out to be caused by max-width (924) not being a multiple of 16. We've likely never hit this problem before since normally xawtv / tvtime, etc. will prefer packed pixel formats. But when using a video card which is using xf86-video-modesetting + glamor, only planar XVideo fmts are available, and xawtv will chose a matching capture format to avoid needing to do conversion, triggering the solid green window problem. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Bart Van Assche authored
commit 51093254 upstream. Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f5748 ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: deleted code is slightly different] Signed-off-by:
-
Sushaanth Srirangapathi authored
commit 713fced8 upstream. Commit 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by:
Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Russell King authored
commit 7f05538a upstream. The calculation for the timeout based on the number of card clocks is incorrect. The calculation assumed: timeout in microseconds = clock cycles / clock in Hz which is clearly a several orders of magnitude wrong. Fix this by multiplying the clock cycles by 1000000 prior to dividing by the Hz based clock. Also, as per part 1, ensure that the division rounds up. As this needs 64-bit math via do_div(), avoid it if the clock cycles is zero. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Russell King authored
commit fafcfda9 upstream. The data timeout gives the minimum amount of time that should be waited before timing out if no data is received from the card. Simply dividing the nanosecond part by 1000 does not give this required guarantee, since such a division rounds down. Use DIV_ROUND_UP() to give the desired timeout. Signed-off-by:
-
Dmitry Tunin authored
commit 81d90442 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3014 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1546694Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Tom Lendacky authored
commit ce0ae266 upstream. Since a crypto_ahash_import() can be called against a request context that has not had a crypto_ahash_init() performed, the request context needs to be cleared to insure there is no random data present. If not, the random data can result in a kernel oops during crypto_ahash_update(). Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jiri Kosina authored
commit c8b08ca5 upstream. mkspec is copying built kernel to temporrary location /boot/vmlinuz-$KERNELRELEASE-rpm and runs installkernel on it. This however directly leads to grub2 menuentry for this suffixed binary being generated as well during the run of installkernel script. Later in the process the temporary -rpm suffixed files are removed, and therefore we end up with spurious (and non-functional) grub2 menu entries for each installed kernel RPM. Fix that by using a different temporary name (prefixed by '.'), so that the binary is not recognized as an actual kernel binary and no menuentry is created for it. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Fixes: 3c9c7a14 ("rpm-pkg: add %post section to create initramfs and grub hooks") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Jes Sorensen authored
commit e7597e69 upstream. 'max_discard_sectors' is in sectors, while 'stripe' is in bytes. This fixes the problem where DISCARD would get disabled on some larger RAID5 configurations (6 or more drives in my testing), while it worked as expected with smaller configurations. Fixes: 620125f2 ("MD: raid5 trim support") Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
Andi Kleen <ak@linux.intel.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Aaro Koskinen authored
commit 5e64c29e upstream. Commit 5942ddbc ("mtd: introduce mtd_block_markbad interface") incorrectly changed onenand_block_markbad() to call mtd_block_markbad instead of onenand_chip's block_markbad function. As a result the function will now recurse and deadlock. Fix by reverting the change. Fixes: 5942ddbc ("mtd: introduce mtd_block_markbad interface") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
commit ea32f065 upstream. On error we jumped to the error label and returned the error code but we missed releasing sinfo. Fixes: 5fe74014172d ("mac80211: avoid excessive stack usage in sta_info") Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0ef049dc upstream. When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 98b62183 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26 ("mac80211: send statistics with delete station event") Signed-off-by:
-
Michal Kazior authored
commit cf440128 upstream. The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit f88fa79a upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dmitry Tunin authored
commit 28c971d8 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944Signed-off-by:
-
Dmitry Tunin authored
commit 609574eb upstream. T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564Reported-and-tested-by:
Christopher Simerly <kilikopela29@gmail.com> Signed-off-by:
-
Andi Kleen authored
commit 940db6dc upstream. When an error happens during alias parsing currently the complete parsing of all attributes of the PMU is stopped. This is breaks old perf on a newer kernel that may have not-yet-know alias attributes (such as .scale or .per-pkg). Continue when some attribute is unparseable. This is IMHO a stable candidate and should be backported to older versions to avoid problems with newer kernels. v2: Print warnings when something goes wrong. v3: Change warning to debug output Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Alexander Usyskin authored
commit 35bf7692 upstream. buf_idx type was changed to size_t, and few places missed out to change the print format from %ld to %zu. Use also uz for buf.size which is also of size_t Fixes: commit 56988f22e097 ("mei: fix possible integer overflow issue")' Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
commit f862b6b2 upstream. There is a possible integer overflow following by a buffer overflow when accumulating messages coming from the FW to compose a full payload. Occurrence of wrap around has to be prevented for next message size calculation. For unsigned integer the addition overflow has occurred when the result is smaller than one of the arguments. To simplify the fix, the types of buf.size and buf_idx are set to the same width, namely size_t also to be aligned with the type of length parameter in file read/write ops. Signed-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Hans de Goede authored
commit 3e71da19 upstream. bytesperline should be the bytesperline for the first plane for planar formats, not that of all planes combined. This fixes a crash in xawtv caused by the wrong bpl. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389Reported-and-tested-by:
Stas Sergeev <stsp@list.ru> Signed-off-by:
-
Hans Verkuil authored
commit b339a72e upstream. The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present. The adv7511 however still reported the EDID present after disconnecting the HDMI cable. Fix the logic regarding this control. And when the EDID is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver. This was also missing. Signed-off-by:
-
Julia Lawall authored
commit 1b669e71 upstream. & is no longer allowed in column 0, since Coccinelle 1.0.4. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Tested-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Arnd Bergmann authored
commit 8e580411 upstream. The davinci platform has tried to get support for the EEPROM right, but failed to get a clean build so far. At the moment, we get a warning whenever CONFIG_SYSFS is disabled, as that is needed by EEPROM_AT24: warning: (MACH_DAVINCI_EVM && MACH_SFFSDR && MACH_DAVINCI_DM6467_EVM && MACH_DAVINCI_DM365_EVM && MACH_DAVINCI_DA830_EVM && MACH_MITYOMAPL138 && MACH_MINI2440) selects EEPROM_AT24 which has unmet direct dependencies (I2C && SYSFS) Kevin Hilman initially added the 'select' to ensure that EEPROM_AT24 is always enabled in machines that really want it for normal operation (i.e. for reading the MAC address). This broke when I2C was disabled, and Russell King followed up with another patch to select that as well. I now see that the SYSFS dependency is still missing, which leaves us with three options: a) add 'select SYSFS' in addition to the others b) change AT24_EEPPROM to work without sysfs (should be possible) c) remove all those selects again and get the files to build when I2C is disabled. I would really hate to do a) because adding select statements that hardwire user-selectable symbols is generally a bad idea. I first tried b) but then ended up redoing the patch from scratch to approach c), so we can also remove the other selects. I checked that CONFIG_I2C is still enabled with davinci_all_defconfig, so that does not have to change. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Arnd Bergmann authored
commit e07ff943 upstream. The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 4392bf33 upstream. hid_ignore_special_drivers works fine until hid_scan_report autodetects and reassign devices (for hid-multitouch, hid-microsoft and hid-rmi). Simplify the handling of the parameter: if it is there, use hid-generic, no matter what, and if not, scan the device or rely on the hid_have_special_driver table. This was detected while trying to disable hid-multitouch on a Surface Pro cover which prevented to use the keyboard. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 9578f41a upstream. This allows the transport layer (I have in mind hid-logitech-dj and uhid) to set the group before it is added to the hid bus. This way, it can bypass the hid_scan_report() call, and choose in advance which driver will handle the newly created hid device. Signed-off-by:
-
Grazvydas Ignotas authored
commit 5d74325a upstream. The patch that added Logitech Dual Action gamepad support forgot to update the special driver list for the device. This caused the logitech driver not to probe unless kernel module load order was favorable. Update the special driver list to fix it. Thanks to Simon Wood for the idea. Cc: Vitaly Katraew <zawullon@gmail.com> Fixes: 56d0c8b7 ("HID: add support for Logitech Dual Action gamepads") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Linus Walleij authored
commit 95a001f2 upstream. As of commit 876fe76d "mtd: maps: physmap: Add reference counter to set_vpp()" the comment in the header file is incorrect and misleading. Fix it up. Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Fixes: 876fe76d ("mtd: maps: physmap: Add reference counter to set_vpp()") Signed-off-by:
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
