This patch adds support for asynchronous resynchronization in tls_device.
Async resync follows two distinct stages:

1. The NIC driver indicates that it would like to resync on some TLS
record within the received packet (P), but the driver does not
know (yet) which of the TLS records within the packet.
At this stage, the NIC driver will query the device to find the exact
TCP sequence for resync (tcpsn), however, the driver does not wait
for the device to provide the response.

2. Eventually, the device responds, and the driver provides the tcpsn
within the resync packet to KTLS. Now, KTLS can check the tcpsn against
any processed TLS records within packet P, and also against any record
that is processed in the future within packet P.

The asynchronous resync path simplifies the device driver, as it can
save bits on the packet completion (32-bit TCP sequence), and pass this
information on an asynchronous command instead.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This reverts commit b3ae2459.
Revert the force resync API.
Not in use. To be replaced by a better async resync API downstream.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Implement driver support for the kTLS RX HW offload feature.
Resync support is added in a downstream patch.

New offload contexts post their static/progress params WQEs
over the per-channel async ICOSQ, protected under a spin-lock.
The Channel/RQ is selected according to the socket's rxq index.

Feature is OFF by default. Can be turned on by:
$ ethtool -K <if> tls-hw-rx-offload on

A new TLS-RX workqueue is used to allow asynchronous addition of
steering rules, out of the NAPI context.
It will be also used in a downstream patch in the resync procedure.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Modify the implementation of the private kTLS TX HW offload context
getter and setter, so it uses the kernel API functions, instead of
a local shadow structure.
A single BUILD_BUG_ON check is sufficient, remove the duplicate.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Better separate the code into c/h files, so that kTLS internals
are exposed to the corresponding non-accel flow as follows:
- Necessary datapath functions are exposed via ktls_txrx.h.
- Necessary caps and configuration functions are exposed via ktls.h,
  which became very small.

In addition, kTLS internal code sharing is done via ktls_utils.h,
which is not exposed to any non-accel file.

Add explicit WQE structures for the TLS static and progress
params, breaking the union of the static with UMR, and the progress
with PSV.

Generalize the API as a preparation for TLS RX offload support.

Move kTLS TX-specific code to the proper file.
Remove the inline tag for function in C files, let the compiler decide.
Use kzalloc/kfree for the priv_tx context.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>

Given a socket, the function extracts the TCP/IP{4,6} ntuple
and adds rule to steering.
Another function gets the rule and deletes it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>

The framework allows creating flow tables to steer incoming traffic of
TCP sockets to the acceleration TIRs.
This is used in downstream patches for TLS, and will be used in the
future for other offloads.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Store the default destinations of the on-load generated TTC
(Traffic Type Classifier) rules in the ttc rules table.

Introduce TTC API functions to manipulate/restore and get the TTC rule
destination and use these API functions in arfs implementation.

This will allow a better decoupling between TTC implementation and its
users.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>

Take the CQ params into their respective RQ/SQ params.
Split the params build of the different ICOSQs (sync and async),
as they require different init values.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

There is an upcoming demand (in downstream patches) for
an ICOSQ to be populated out of the NAPI context, asynchronously.

There is already an existing one serving XSK-related use case.
In this patch, promote this ICOSQ to serve as general async ICOSQ,
to be used for XSK and non-XSK flows.

As part of this, the reg_umr bit of the SQ context is now set
(if capable), as the general async ICOSQ should support possible
posts of UMR WQEs.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: kTLS, Improve TLS params layout structures
  net/mlx5: Avoid eswitch header inclusion in fs core layer
  net/mlx5: Avoid RDMA file inclusion in core driver
  net/mlx5: Add support in query QP, CQ and MKEY segments
  net/mlx5: Export resource dump interface
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add explicit WQE segment structures for the TLS static and progress
params.
According to the HW spec, TISN is not part of the progress params context,
take it out of it.
Rename the control segment tisn field as it could hold either a TIS or
a TIR number.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Flow steering core layer is independent of the eswitch layer.
Hence avoid fs_core dependency on eswitch.

Fixes: 328edb49 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5 cq.h does not depend on RDMA verbs.
Remove RDMA verbs file inclusion.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Igor Russkikh says:

====================
net: atlantic: various non-functional changes

This patchset contains several non-functional changes, which were made in
out of tree driver over the time.
Mostly typos, checkpatch findings and comment fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A1 requires additional processing for both egress and ingress to support
PTP.
And it makes sense to get rid of this processing altogether (via ifdef),
if PTP clock is disabled globally.

This patch puts the PTP code under the corresponding IS_REACHABLE check.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds alignment checks in all the helper macros in
hw_atl2_utils_fw.c
These alignment checks are compile-time, so runtime is not affected.

All these helper macros assume the length to be aligned (multiple of 4).
If it's not aligned, then there might be issues, e.g. stack corruption.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add a missing space in the comment in aq_nic.h
Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a typo in aq_ring_tx_clean.
stats is a union, so the typo doesn't cause any issues, but it's a typo
nonetheless.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes aq_pci_func_init() static, because it's not used anywhere
outside the file itself.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces ENOTSUPP (where it was used by mistake) with
EOPNOTSUPP.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the type for variable which is assigned from enum,
as such it should have been int, not u32.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a checkpatch warning.

Fixes: aec0f1aa ("net: atlantic: MACSec offload statistics implementation")
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: refactor token container

Currently the msk sockets are stored in a single radix tree, protected by a
global spin_lock. This series moves to an hash table, allocated at boot time,
with per bucker spin_lock - alike inet_hashtables, but using a different key:
the token itself.

The above improves scalability, as write operations will have a far later chance
to compete for lock acquisition, allows lockless lookup, and will allow
easier msk traversing - e.g. for diag interface implementation's sake.

This also introduces trivial, related, kunit tests and move the existing in
kernel's one to kunit.

v1 -> v2:
 - fixed a few extra and sparse warns
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unit tests for the internal MPTCP token APIs, using KUNIT

v1 -> v2:
 - use the correct RCU annotation when initializing icsk ulp
 - fix a few checkpatch issues
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

currently MPTCP uses a custom hook to executed unit tests at
boot time. Let's use the KUNIT framework instead.
Additionally move the relevant code to a separate file and
export the function needed by the test when self-tests
are build as a module.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the radix tree with a hash table allocated
at boot time. The radix tree has some shortcoming:
a single lock is contented by all the mptcp operation,
the lookup currently use such lock, and traversing
all the items would require a lock, too.

With hash table instead we trade a little memory to
address all the above - a per bucket lock is used.

To hash the MPTCP sockets, we re-use the msk' sk_node
entry: the MPTCP sockets are never hashed by the stack.
Replace the existing hash proto callbacks with a dummy
implementation, annotating the above constraint.

Additionally refactor the token creation to code to:

- limit the number of consecutive attempts to a fixed
maximum. Hitting a hash bucket with a long chain is
considered a failed attempt

- accept() no longer can fail to token management.

- if token creation fails at connect() time, we do
fallback to TCP (before the connection was closed)

v1 -> v2:
 - fix "no newline at end of file" - Jakub
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the missing annotation in some setup-only
functions.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: organize driver docs by device type

This series finishes off what I started in
commit b255e500 ("net: documentation: build a directory structure for drivers").
The objective is to de-clutter our documentation folder so folks
have a chance of finding relevant info. I _think_ I got all the
driver docs from the main documentation directory this time around.

While doing this I realized that many of them are of limited relevance
these days, so I went ahead and sliced the drivers directory by
technology. Those feeling nostalgic are free to dive into the FDDI,
ATM etc. docs, but for most Ethernet is what we care about.

v1:
 - simplify Intel's docs list in MAINTAINERS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for defza and skfp under device_drivers/fddi.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for cxacru, fore200e and iphase under device_drivers/atm.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for cops and ltpc under device_drivers/appletalk.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for hinic and altera_tse under device_drivers/ethernet.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move ray_cs into Wi-Fi driver docs subdirectory.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move baycom to hamradio.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move z8530 docs to hamradio and wan subdirectories.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Organize driver documentation by device type. Most documents
have fairly verbose yet uninformative names, so let users
first select a well defined device type, and then search for
a particular driver.

While at it rename the section from Vendor drivers to
Hardware drivers. This seems more accurate, besides people
sometimes refer to out-of-tree drivers as vendor drivers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
net: phy: relax PHY and MDIO reset handling

Previously these patches were submitted as part of a larger series[1]
but since the approach in it will have to be reworked I'm resending
the ones that were non-controversial and have been reviewed for upstream.

Florian suggested a better solution for managing multiple resets. While
I will definitely try to implement something at the driver model's bus
level (together with regulator support), the 'resets' and 'reset-gpios'
DT property is a stable ABI defined in mdio.yaml so improving its support
is in order as we'll have to stick with it anyway. Current implementation
contains an unnecessary limitation where drivers without probe() can't
define resets.

Changes from the previous version:
- order forward declarations in patch 4 alphabetically
- collect review tags

[1] https://lkml.org/lkml/2020/6/22/253
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarily to PHY drivers - there's no reason to require probe() to be
implemented in order to call mdio_device_reset(). MDIO devices can have
resets defined without needing to do anything in probe().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we only call phy_device_reset() if the PHY driver implements
the probe() callback. This is not mandatory and many drivers (e.g.
realtek) don't need probe() for most devices but still can have reset
GPIOs defined. There's no reason to depend on the presence of probe()
here so pull the reset code out of the if clause.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>