When no devicetree is present, the driver will use an
uninitialized variable.

Fix by initializing this variable.

Fixes: 902a66e0 ("lan743x: correctly handle chips with internal PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexander Lobakin says:

====================
net: udp: fix Fast/frag0 UDP GRO

While testing UDP GSO fraglists forwarding through driver that uses
Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order
iperf packets:

[ ID] Interval           Transfer     Bitrate         Jitter
[SUM]  0.0-40.0 sec  12106 datagrams received out-of-order

Simple switch to napi_gro_receive() or any other method without frag0
shortcut completely resolved them.

I've found two incorrect header accesses in GRO receive callback(s):
 - udp_hdr() (instead of udp_gro_udphdr()) that always points to junk
   in "fast" mode and could probably do this in "regular".
   This was the actual bug that caused all out-of-order delivers;
 - udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of
   skb_gro_network_header()) that potentionally might return odd
   pointers in both modes.

Each patch addresses one of these two issues.

This doesn't cover a support for nested tunnels as it's out of the
subject and requires more invasive changes. It will be handled
separately in net-next series.

Credits:
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>

Since v4 [0]:
 - split the fix into two logical ones (Willem);
 - replace ternaries with plain ifs to beautify the code (Jakub);
 - drop p->data part to reintroduce it later in abovementioned set.

Since v3 [1]:
 - restore the original {,__}udp{4,6}_lib_lookup_skb() and use
   private versions of them inside GRO code (Willem).

Since v2 [2]:
 - dropped redundant check introduced in v2 as it's performed right
   before (thanks to Eric);
 - udp_hdr() switched to data + off for skbs from list (also Eric);
 - fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with
   Fast/frag0 due to ip{,v6}_hdr() usage (Willem).

Since v1 [3]:
 - added a NULL pointer check for "uh" as suggested by Willem.

[0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch
[1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch
[2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch
[3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch
====================

Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.chSigned-off-by: Jakub Kicinski <kuba@kernel.org>

udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.

Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.

Misc: replace totally unneeded ternaries with plain ifs.

Fixes: a6024562 ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.

Present since the introduction of plain UDP GRO in 5.0-rc1.

Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-11-10

This series contains updates to i40e and igc drivers and the MAINTAINERS
file.

Slawomir fixes updating VF MAC addresses to fix various issues related
to reporting and setting of these addresses for i40e.

Dan Carpenter fixes a possible used before being initialized issue for
i40e.

Vinicius fixes reporting of netdev stats for igc.

Tony updates repositories for Intel Ethernet Drivers.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  MAINTAINERS: Update repositories for Intel Ethernet Drivers
  igc: Fix returning wrong statistics
  i40e, xsk: uninitialized variable in i40e_clean_rx_irq_zc()
  i40e: Fix MAC address setting for a VF via Host/VM
====================

Link: https://lore.kernel.org/r/20201111001955.533210-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit in fixes tag overwrites the port attributes for the
registered port.

Avoid such error by checking registered flag before setting attributes.

Fixes: 71ad8d55 ("devlink: Replace devlink_port_attrs_set parameters with a struct")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.

Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.

Fixes: dcdd43c4 ("net: vrf: performance improvements for IPv4")
Fixes: a9ec54d1 ("net: vrf: performance improvements for IPv6")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move to the kernel.org patchwork instance, it has significantly
lower latency for accessing from Europe and the US. Other quirks
include the reply bot.

Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rohit Maheshwari says:

====================
cxgb4/ch_ktls: Fixes in nic tls code

This series helps in fixing multiple nic ktls issues. Series is broken
into 12 patches.

Patch 1 avoids deciding tls packet based on decrypted bit. If its a
retransmit packet which has tls handshake and finish (for encryption),
decrypted bit won't be set there, and so we can't rely on decrypted
bit.

Patch 2 helps supporting linear skb. SKBs were assumed non-linear.
Corrected the length extraction.

Patch 3 fixes the checksum offload update in WR.

Patch 4 fixes kernel panic happening due to creating new skb for each
record. As part of fix driver will use same skb to send out one tls
record (partial data) of the same SKB.

Patch 5 fixes the problem of skb data length smaller than remaining data
of the record.

Patch 6 fixes the handling of SKBs which has tls header alone pkt, but
not starting from beginning.

Patch 7 avoids sending extra data which is used to make a record 16 byte
aligned. We don't need to retransmit those extra few bytes.

Patch 8 handles the cases where retransmit packet has tls starting
exchanges which are prior to tls start marker.

Patch 9 fixes the problem os skb free before HW knows about tcp FIN.

Patch 10 handles the small packet case which has partial TAG bytes only.
HW can't handle those, hence using sw crypto for such pkts.

Patch 11 corrects the potential tcb update problem.

Patch 12 stops the queue if queue reaches threshold value.

v1->v2:
- Corrected fixes tag issue.
- Marked chcr_ktls_sw_fallback() static.

v2->v3:
- Replaced GFP_KERNEL with GFP_ATOMIC.
- Removed mixed fixes.

v3->v4:
- Corrected fixes tag issue.

v4->v5:
- Separated mixed fixes from patch 4.

v5-v6:
- Fixes tag should be at the end.
====================

Link: https://lore.kernel.org/r/20201109105142.15398-1-rohitm@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Stop the queue and ask for the credits if queue reaches to
threashold.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

context id and port id should be filled while sending tcb update.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If TCP congestion caused a very small packets which only has some
part fo the TAG, and that too is not till the end. HW can't handle
such case, so falling back to sw crypto in such cases.

v1->v2:
- Marked chcr_ktls_sw_fallback() static.

Fixes: dc05f3df ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If its a last packet and fin is set. Make sure FIN is informed
to HW before skb gets freed.

Fixes: 429765a1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There could be a case where ACK for tls exchanges prior to start
marker is missed out, and by the time tls is offloaded. This pkt
should not be discarded and handled carefully. It could be
plaintext alone or plaintext + finish as well.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a record starts in middle, reset TCB UNA so that we could
avoid sending out extra packet which is needed to make it 16
byte aligned to start AES CTR.
Check also considers prev_seq, which should be what is
actually sent, not the skb data length.
Avoid updating partial TAG to HW at any point of time, that's
why we need to check if remaining part is smaller than TAG
size, then reset TX_MAX to be TAG starting sequence number.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an skb has only header part which doesn't start from
beginning, is not being handled properly.

Fixes: dc05f3df ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

trimmed length calculation goes wrong if skb has only tag part
to send. It should be zero if there is no data bytes apart from
TAG.

Fixes: dc05f3df ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Creating SKB per tls record and freeing the original one causes
panic. There will be race if connection reset is requested. By
freeing original skb, refcnt will be decremented and that means,
there is no pending record to send, and so tls_dev_del will be
requested in control path while SKB of related connection is in
queue.
 Better approach is to use same SKB to send one record (partial
data) at a time. We still have to create a new SKB when partial
last part of a record is requested.
 This fix introduces new API cxgb4_write_partial_sgl() to send
partial part of skb. Present cxgb4_write_sgl can only provide
feasibility to start from an offset which limits to header only
and it can write sgls for the whole skb len. But this new API
will help in both. It can start from any offset and can end
writing in middle of the skb.

v4->v5:
- Removed extra changes.

Fixes: 429765a1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Checksum update was missing in the WR.

Fixes: 429765a1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a possibility of linear skbs coming in. Correcting
the length extraction logic.

v2->v3:
- Separated un-related changes from this patch.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If skb has retransmit data starting before start marker, e.g. ccs,
decrypted bit won't be set for that, and if it has some data to
encrypt, then it must be given to crypto ULD. So in place of
decrypted, check if socket is tls offloaded. Also, unless skb has
some data to encrypt, no need to give it for tls offload handling.

v2->v3:
- Removed ifdef.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes a regression for blocking connects introduced by commit
4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect").

The x25->neighbour is already set to "NULL" by x25_disconnect() now,
while a blocking connect is waiting in
x25_wait_for_connection_establishment(). Therefore x25->neighbour must
not be accessed here again and x25->state is also already set to
X25_STATE_0 by x25_disconnect().

Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX") the
network port of the Kontron sl28 board is broken. After the migration to
phylink the device tree has to specify the in-band-mode property. Add
it.

Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201109110436.5906-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

kmemleak report a memory leak as follows:

unreferenced object 0xffff88810a596800 (size 512):
  comm "ip", pid 21558, jiffies 4297568990 (age 112.120s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff  ..........`.....
  backtrace:
    [<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70
    [<00000000fe15ddf7>] ops_init+0xa8/0x3c0
    [<00000000138af6f2>] setup_net+0x2de/0x7e0
    [<000000008c6807a3>] copy_net_ns+0x27d/0x530
    [<000000006b21adbd>] create_new_namespaces+0x382/0xa30
    [<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0
    [<00000000fe2e42bc>] ksys_unshare+0x39c/0x780
    [<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40
    [<00000000614ad866>] do_syscall_64+0x56/0xa0
    [<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

'srv' is malloced in tipc_topsrv_start() but not free before
leaving from the error handling cases. We need to free it.

Fixes: 5c45ab24 ("tipc: make struct tipc_server private for server.c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Julian Wiedmann says:

====================
net/iucv: fixes 2020-11-09

One fix in the shutdown path for af_iucv sockets. This is relevant for
stable as well.
Also sending along an update for the Maintainers file.

v1 -> v2: use the correct Fixes tag in patch 1 (Jakub)
====================

Link: https://lore.kernel.org/r/20201109075706.56573-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I am retiring soon. Thus this patch removes myself from the
MAINTAINERS file (s390 network).
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: fix up the subject]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported the following KASAN finding:

BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
Read of size 2 at addr 000000000000021e by task syz-executor907/519

CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
 [<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline]
 [<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135
 [<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline]
 [<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118
 [<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383
 [<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline]
 [<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534
 [<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
 [<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457
 [<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204
 [<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline]
 [<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210
 [<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

There is nothing to shutdown if a connection has never been established.
Besides that iucv->hs_dev is not yet initialized if a socket is in
IUCV_OPEN state and iucv->path is not yet initialized if socket is in
IUCV_BOUND state.
So, just skip the shutdown calls for a socket in these states.

Fixes: eac3731b ("[S390]: Add AF_IUCV socket support")
Fixes: 82492a35 ("af_iucv: add shutdown for HS transport")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: correct one Fixes tag]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the net core, the struct net_device_ops -> ndo_set_rx_mode()
callback is called with the dev->addr_list_lock spinlock held.

However, this driver's ndo_set_rx_mode callback eventually calls
lan743x_dp_write(), which acquires a mutex. Mutex acquisition
may sleep, and this is not allowed when holding a spinlock.

Fix by removing the dp_lock mutex entirely. Its purpose is to
prevent concurrent accesses to the data port. No concurrent
accesses are possible, because the dev->addr_list_lock
spinlock in the core only lets through one thread at a time.

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When mv88e6xxx_fid_map return error, we lost free the table.

Fix it.

Fixes: bfb25542 ("net: dsa: mv88e6xxx: Add devlink regions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201109144416.1540867-1-zhangxiaoxu5@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The RTL8401-internal PHY identifies as RTL8201CP, and the init
sequence in r8169, copied from vendor driver r8168, uses paged
operations. Therefore set the same paged operation callbacks as
for the other Realtek PHY's.

Fixes: cdafdc29 ("r8169: sync support for RTL8401 with vendor driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/69882f7a-ca2f-e0c7-ae83-c9b6937282cd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 6f197fb6 ("lan743x: Added fixed link and RGMII support")
assumes that chips with an internal PHY will never have a devicetree
entry. This is incorrect: even for these chips, a devicetree entry
can be useful e.g. to pass the mac address from bootloader to chip:

    &pcie {
            status = "okay";

            host@0 {
                    reg = <0 0 0 0 0>;

                    #address-cells = <3>;
                    #size-cells = <2>;

                    lan7430: ethernet@0 {
                            /* LAN7430 with internal PHY */
                            compatible = "microchip,lan743x";
                            status = "okay";
                            reg = <0 0 0 0 0>;
                            /* filled in by bootloader */
                            local-mac-address = [00 00 00 00 00 00];
                    };
            };
    };

If a devicetree entry is present, the driver will not attach the chip
to its internal phy, and the chip will be non-operational.

Fix by tweaking the phy connection algorithm:
- first try to connect to a phy specified in the devicetree
  (could be 'real' phy, or just a 'fixed-link')
- if that doesn't succeed, try to connect to an internal phy, even
  if the chip has a devnode

Tested on a LAN7430 with internal PHY. I cannot test a device using
fixed-link, as I do not have access to one.

Fixes: 6f197fb6 ("lan743x: Added fixed link and RGMII support")
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current NetLabel code doesn't correctly keep track of the netlink
dump state in some cases, in particular when multiple interfaces with
large configurations are loaded.  The problem manifests itself by not
reporting the full configuration to userspace, even though it is
loaded and active in the kernel.  This patch fixes this by ensuring
that the dump state is properly reset when necessary inside the
netlbl_unlabel_staticlist() function.

Fixes: 8cc44579 ("NetLabel: Introduce static network labels for unlabeled connections")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@siflSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update Intel Ethernet Drivers repositories to new locations.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

'igc_update_stats()' was not updating 'netdev->stats', so the returned
statistics, for example, requested by:

$ ip -s link show dev enp3s0

were not being updated and were always zero.

Fix by returning a set of statistics that are actually being
updated (adapter->stats64).

Fixes: c9a11c23 ("igc: Add netdev")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The "failure" variable is used without being initialized.  It should be
set to false.

Fixes: 8cbf7414 ("i40e, xsk: move buffer allocation out of the Rx processing loop")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix MAC setting flow for the PF driver.

Update the unicast VF's MAC address in VF structure if it is
a new setting in i40e_vc_add_mac_addr_msg.

When unicast MAC address gets deleted, record that and
set the new unicast MAC address that is already waiting in the filter
list. This logic is based on the order of messages arriving to
the PF driver.

Without this change the MAC address setting was interpreted
incorrectly in the following use cases:
1) Print incorrect VF MAC or zero MAC
ip link show dev $pf
2) Don't preserve MAC between driver reload
rmmod iavf; modprobe iavf
3) Update VF MAC when macvlan was set
ip link add link $vf address $mac $vf.1 type macvlan
4) Failed to update mac address when VF was trusted
ip link set dev $vf address $mac

This includes all other configurations including above commands.

Fixes: f657a6e1 ("i40e: Fix VF driver MAC address configuration")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Iproute2 tc classifier terse dump has been accepted with modified syntax.
Update the tests accordingly.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Fixes: e7534fd4 ("selftests: implement flower classifier terse dump tests")
Link: https://lore.kernel.org/r/20201107111928.453534-1-vlad@buslov.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The mptcp proto struct currently does not provide the
required limit for forward memory scheduling. Under
pressure sk_rmem_schedule() will unconditionally try
to use such field and will oops.

Address the issue inheriting the tcp limit, as we already
do for the wmem one.

Fixes: 9c3f94e1 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/37af798bd46f402fb7c79f57ebbdd00614f5d7fa.1604861097.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>