Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner arm64 DT changes for 4.21

Our usual set of arm64 DT changes, with the biggest additions being:
  - Support for the video decoding engine in the A64
  - Support for the audio codec in the A64
  - USB Support in the H6
  - HDMI Support in the H6
  - EMAC Support in the H6
  - New board: Orange Pi Lite2

* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
  arm64: dts: allwinner: a64: Fix up RTC device node and clock references
  arm64: dts: allwinner: a64: Add Video Engine node
  arm64: dts: allwinner: a64: Add support for the SRAM C1 section
  arm64: dts: allwinner: a64: pinebook: enable power supplies
  arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
  arm64: dts: allwinner: axp803: add AC and battery power supplies
  arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
  arm64: dts: allwinner: a64: enable sound on Pinebook
  arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
  arm64: dts: allwinner: a64: add nodes necessary for analog sound support
  arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
  arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
  arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
  arm64: dts: allwinner: h6: fix EMAC compatible string sequence
  arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
  dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
  arm64: dts: allwinner: h6: enable USB2 on Pine H64
  arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
  arm64: dts: allwinner: h6: add USB2-related device nodes
  arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner DT changes for 4.21

This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.

We also have a bunch of other good, more meaningful, changes:
  - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
    SoCs
  - AXP803 PMIC AC Power supply support
  - Rework of the oscillators tree
  - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano

Plus a few enhancements here and there.

* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
  ARM: dts: sunxi: Fix PMU compatible strings
  ARM: dts: sun8i: r40: Add RTC device node
  ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
  ARM: dts: sun8i: a23/a33: Fix up RTC device node
  ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
  ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
  ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
  ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
  ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
  ARM: dts: suniv: Add device tree for Lichee Pi Nano
  ARM: dts: suniv: add initial DTSI file for F1C100s
  ARM: dts: axp81x: add AC power supply subnode
  ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
  ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
  ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
  ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
  ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
  ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
  ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
  ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

arm64: tegra: Device tree change for v4.21-rc1

These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.

* tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits)
  arm64: tegra: Set reg property for display-hub on Tegra194
  arm64: tegra: Set reg property for display-hub on Tegra186
  arm64: dts: tegra186: Enable IOMMU for SDHCI
  arm64: tegra: Enable HDA controller on Jetson TX1
  arm64: tegra: Add CEC controller on Tegra194
  arm64: tegra: Enable HDA on Jetson Xavier
  arm64: tegra: Add HDA controller on Tegra194
  arm64: tegra: Add CEC controller on Tegra186
  arm64: tegra: Enable HDA on Jetson TX2
  arm64: tegra: Add HDA controller on Tegra186
  arm64: tegra: Add temperature sensor on P2888
  arm64: tegra: Add gpio-keys on Jetson Xavier
  arm64: tegra: Add AON GPIO controller on Tegra194
  arm64: tegra: p2888: Enable on-die RTC
  arm64: tegra: Add RTC support on Tegra194
  arm64: tegra: Enable PMC wake events on Tegra194
  arm64: tegra: p3310: Enable on-die RTC
  arm64: tegra: Add RTC support on Tegra186
  arm64: tegra: Enable PMC wake events on Tegra186
  arm64: tegra: Fix power key interrupt type on Jetson TX2
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Device tree changes for v4.21-rc1

These changes add the external memory controller on Tegra20 as well as
the VIC on Tegra124.

* tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add VIC on Tegra124
  ARM: dts: tegra20: Add clock entry to External Memory Controller
  ARM: dts: tegra20: Add interrupt entry to External Memory Controller
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.21-rc1

This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.

* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra186-pmc: Add interrupt controller properties
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  dt: bindings: Move tegra20-emc binding to memory-controllers directory
  dt: bindings: tegra20-emc: Document clock property
  dt: bindings: tegra20-emc: Document interrupt property
  dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.21

* Move 'renesas,prr' binding to its own document
  - Prepration for converting board-level bindings to json-schema

* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM

* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
  dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
  dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.21

* RZ/G1N (r8a7744) SoC
  - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
    I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
    thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
  - iWave G20D-Q7 board
    - Initial support
    - Enable eMMC, SDHI and SPIO NOR support
  - Add camera daughterboard

* RZ/G1M (r8a7743) SoC
  - Remove legacy "renesas,rcar-thermal" compatibility

* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: dts: r8a7744-iwg20m: Add SPI NOR support
  ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
  ARM: dts: r8a7744: Add PCIe Controller device node
  ARM: dts: r8a7744: Add xhci support
  ARM: dts: r8a7744: Add MSIOF[012] support
  ARM: dts: r8a7744: Add QSPI support
  ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
  ARM: dts: r8a7744: Add TPU support
  ARM: dts: r8a7744: Add PWM SoC support
  ARM: dts: r8a7744: Add IPMMU DT nodes
  ARM: dts: r8a7744: Add VSP support
  ARM: dts: r8a7744: add VIN dt support
  ARM: dts: r8a7744: Add CMT SoC specific support
  ARM: dts: r8a7744: Add thermal device to DT
  ARM: dts: r8a7744: Add IRQC support
  ARM: dts: r8a7744: Add CAN support
  ARM: dts: r8a7744: Add audio support
  ARM: dts: r8a7744: Add RWDT node
  ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
  ARM: dts: r8a7744: USB 2.0 host support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.21

* R-Car D3 (r8a77995) SoC based Draak board
  - Add the backlight device for the LVDS1 output

* R-Car H3 (r8a7795) ES1.0 SoC
  - Add missing power domains to IPMMU nodes

* R-Car M3-N (r8a77965) SoC
  - Remove non-existent IPMMU-IR

* tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77995: draak: Add backlight
  arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
  arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt

ASPEED device tree updates for 4.20

 - New machine: Facebook Backpack-CMM BMC and flash layout

 - OpenPower reference systems (Palmetto P8, Romulus P9) move to the
   ColdFire based FSI driver

 - Misc device tree updates from the OpenBMC project

* tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
  ARM: dts: Add Facebook BMC flash layout
  ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
  ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
  ARM: dts: aspeed: Enable VHUB on Romulus
  ARM: dts: aspeed-palmetto: Add LPC control node
  ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
  ARM: dts: aspeed: Romulus system can use coprocessor for FSI
Signed-off-by: Olof Johansson <olof@lixom.net>

This device-tree pxa update brings :
 - various fixes from Daniel (W=12 issues mainly)
 - support for the first pxa3xx devicetree pxa board

* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa3xx: Add Raumfeld DTS files
  ARM: dts: pxa: clean up USB controller nodes
  ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
  ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
  ARM: dts: pxa2xx: fix hwuart memory range
  ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
  ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
  ARM: dts: pxa3xx: add gcu node
Signed-off-by: Olof Johansson <olof@lixom.net>

"arm,cortex-a15-pmu" is not a valid fallback compatible string for an
Cortex-A7 PMU, so drop it.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The RTC module on the A64 was claimed to be the same as on the A31, when
in fact it is not. It is actually compatible to the H3's RTC. The A64's
RTC has some extra crypto-related registers which the H3's does not, but
the exact function of these is not clear.

This patch fixes the compatible string and clock properties to conform
to the updated bindings. The device node for the internal oscillator is
removed, as it is internalized into the RTC device. Clock references to
the IOSC and LOSC are also fixed.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The R40 has an RTC hardware block, which has additional registers
that are not related to RTC or clock functions, and is otherwise
compatible with the H3's RTC.

Add a device node for it, and fix up any references to the LOSC.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The RTC module on the H3 was claimed to be the same as on the A31, when
in fact it is not. The A31 does not have an RTC external clock output,
and its internal RC oscillator's average clock rate is not in the same
range. The H5's RTC has some extra crypto-related registers compared to
the H3. Their exact functions are not clear. Also the RTC-VIO regulator
has different settings.

This patch fixes the compatible string and clock properties to conform
to the updated bindings. The device node for the internal oscillator is
removed, as it is internalized into the RTC device. Clock references to
the IOSC and LOSC are also fixed.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The RTC module on the A23 was claimed to be the same as on the A31, when
in fact it is not. The A31 does not have an RTC external clock output,
and its internal RC oscillator's average clock rate is not in the same
range. The A33's RTC is the same as the A23.

This patch fixes the compatible string and clock properties to conform
to the updated bindings. The register range is also fixed.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings,
listing it as a supported system on module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Enable IOMMU for all SDHCI controllers in Tegra186.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The HDA controller can be used for audio playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The CEC controller found on Tegra194 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable the HDA controller on Jetson Xavier so that it can be used for
audio playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The HDA controller found on Tegra194 can be used for audio playback over
HDMI.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The CEC controller found on Tegra186 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable the HDA controller on Jetson TX2 so that it can be used for audio
playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The HDA controller found on Tegra186 can be used for audio playback over
HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The R40 datasheet specifies a tolerance range for the external
oscillators used. Add them to the device tree as the clock accuracy.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The H3 datasheet specifies a tolerance range for the external
oscillators used. Add them to the device tree as the clock accuracy.
The internal oscillator is left unchanged, as it will be removed later.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Add support for the SPI NOR device used to boot up the system
to the iWave RZ/G1N Qseven System On Module DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the backlight device for the LVDS1 output, in preparation for panel
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The current oversampling rate of 512 means that for 48 kHz 16 bit
stereo, the MCLK is running at the same rate as the module clock,
so there is no head room to support higher sampling rates. The codec
however supports up to 192 kHz for playback.

This patch drops the oversampling rate from 512 to 128, so that 192 kHz
audio can be played back directly without downsampling. Ideally we
should be using different oversampling rates for different sampling
rates, but that's not possible without a platform-specific machine
driver.

Fixes: 870f1bd1 ("ARM: dts: sun8i: Add audio codec, dai and card for A33")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

This adds the Video Engine node for the A64. Since it can map the whole
DRAM range, there is no particular need for a reserved memory node
(unlike platforms preceding the A33).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Add the description for the SRAM C1 section to the A64 device-tree.

Since there is no entry for this section in the A64 manual, the base
address and size were only verified to be consistent empirically.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Just like on the A33, the video engine on the H3 can map any address in
memory, so there is no particular need to have reserved memory at a fixed
address.

As a result, remove the reserved memory node and let the kernel allocate
the CMA pool wherever it sees fit.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

While we believed that the memory for the video engine had to be kept
in the first 256 MiBs of DRAM, this is no longer true starting with the
A33 and any address can be mapped.

As a result, remove the reserved memory node and let the kernel allocate
the CMA pool wherever it sees fit.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Add a device node for the PCIe controller on the Renesas
RZ/G1N (r8a7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add a device node for the xhci controller on the Renesas
RZ/G1N (r8a7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>