Pull s390 fixes from Heiko Carstens:

 - fix reference counting for ap devices

 - fix paes selftest

 - fix pmd_deref()/pud_deref() so they can also handle large pages

 - remove unused vdso file and defines

 - update defconfigs

 - call rcu_cpu_starting() early in smp init code to avoid lockdep
   warnings

 - fix hotplug of PCI function missing bus

* tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix hot-plug of PCI function missing bus
  s390/smp: move rcu_cpu_starting() earlier
  s390/pkey: fix paes selftest failure with paes and pkey static build
  s390: update defconfigs
  s390/vdso: remove unused constants
  s390/vdso: remove empty unused file
  s390/mm: make pmd/pud_deref() large page aware
  s390/ap: fix ap devices reference counting

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc3, including fixes from wireless, can, and
  netfilter subtrees.

  Current merge window - bugs in new features:

   - can: isotp: isotp_rcv_cf(): enable RX timeout handling in
     listen-only mode

  Previous releases - regressions:

   - mac80211:
      - don't require VHT elements for HE on 2.4 GHz
      - fix regression where EAPOL frames were sent in plaintext

   - netfilter:
      - ipset: Update byte and packet counters regardless of whether
        they match

   - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
     inner packet has IP_DF (don't fragment) set in its header (when
     TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)

   - net: fec: fix MDIO probing for some FEC hardware blocks

   - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
     support

   - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
     platforms, sparse-related fix used the wrong integer size

  Previous releases - always broken:

   - netfilter: use actual socket sk rather than skb sk when routing
     harder

   - r8169: work around short packet hw bug on RTL8125 by padding frames

   - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
     advertisement, the hardware does not support it

   - chelsio/chtls: fix always leaking ctrl_skb and another leak caused
     by a race condition

   - fix drivers incorrectly writing into skbs on TX:
      - cadence: force nonlinear buffers to be cloned
      - gianfar: Account for Tx PTP timestamp in the skb headroom
      - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP

   - can: flexcan:
      - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
      - add ECC initialization for VF610 and LX2160A
      - flexcan_remove(): disable wakeup completely

   - can: fix packet echo functionality:
      - peak_canfd: fix echo management when loopback is on
      - make sure skbs are not freed in IRQ context in case they need to
        be dropped
      - always clone the skbs to make sure they have a reference on the
        socket, and prevent it from disappearing
      - fix real payload length return value for RTR frames

   - can: j1939: return failure on bind if netdev is down, rather than
     waiting indefinitely

  Misc:

   - IPv6: reply ICMP error if the first fragment don't include all
     headers to improve compliance with RFC 8200"

* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  ionic: check port ptr before use
  r8169: work around short packet hw bug on RTL8125
  net: openvswitch: silence suspicious RCU usage warning
  chelsio/chtls: fix always leaking ctrl_skb
  chelsio/chtls: fix memory leaks caused by a race
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  ...

Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fixes from Shuah Khan:
 "Several kunit_tool and documentation fixes"

* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tools: fix kunit_tool tests for parsing test plans
  Documentation: kunit: Update Kconfig parts for KUNIT's module support
  kunit: test: fix remaining kernel-doc warnings
  kunit: Don't fail test suites if one of them is empty
  kunit: Fix kunit.py --raw_output option

Pull tracing fixes from Steven Rostedt:

 - Fix off-by-one error in retrieving the context buffer for
   trace_printk()

 - Fix off-by-one error in stack nesting limit

 - Fix recursion to not make all NMI code false positive as recursing

 - Stop losing events in function tracing when transitioning between irq
   context

 - Stop losing events in ring buffer when transitioning between irq
   context

 - Fix return code of error pointer in parse_synth_field() to prevent
   NULL pointer dereference.

 - Fix false positive of NMI recursion in kprobe event handling

* tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kprobes: Tell lockdep about kprobe nesting
  tracing: Make -ENOMEM the default error for parse_synth_field()
  ring-buffer: Fix recursion protection transitions between interrupt context
  tracing: Fix the checking of stackidx in __ftrace_trace_stack
  ftrace: Handle tracing when switching between context
  ftrace: Fix recursion check for NMI test
  tracing: Fix out of bounds write in get_trace_buf

Pull hyperv fixes from Wei Liu:

 - clarify a comment (Michael Kelley)

 - change a pr_warn() to pr_info() (Olaf Hering)

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Clarify comment on x2apic mode
  hv_balloon: disable warning when floor reached

Pull rdma fixes from Jason Gunthorpe:
 "A few more merge window regressions that didn't make rc1:

   - New validation in the DMA layer triggers wrong use of the DMA layer
     in rxe, siw and rdmavt

   - Accidental change of a hypervisor facing ABI when widening the port
     speed u8 to u16 in vmw_pvrdma

   - Memory leak on error unwind in SRP target"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
  RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
  IB/srpt: Fix memory leak in srpt_add_one
  RDMA: Fix software RDMA drivers for dma mapping error

Pull spi fixes from Mark Brown:
 "A small collection of driver specific fixes that have come in since
  the merge window, nothing too major here but all good to have"

* tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl-dspi: fix wrong pointer in suspend/resume
  spi: bcm2835: fix gpio cs level inversion
  spi: imx: fix runtime pm support for !CONFIG_PM

Merge tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "An addition to MAINTAINERS plus a fix for a nasty bootstrapping
  problem which caused problems when we need to read the voltage of a
  regulator that is not yet available during initialization, we were not
  correctly distinguishing between this case and the case where a
  regulator is put into a bypass mode"

* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: defer probe when trying to get voltage from unresolved supply
  MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator

Pull power management fixes from Rafael Wysocki:
 "These fix the device links support in runtime PM, correct mistakes in
  the cpuidle documentation, fix the handling of policy limits changes
  in the schedutil cpufreq governor, fix assorted issues in the OPP
  (operating performance points) framework and make one janitorial
  change.

  Specifics:

   - Unify the handling of managed and stateless device links in the
     runtime PM framework and prevent runtime PM references to devices
     from being leaked after device link removal (Rafael Wysocki).

   - Fix two mistakes in the cpuidle documentation (Julia Lawall).

   - Prevent the schedutil cpufreq governor from missing policy limits
     updates in some cases (Viresh Kumar).

   - Prevent static OPPs from being dropped by mistake (Viresh Kumar).

   - Prevent helper function in the OPP framework from returning
     prematurely (Viresh Kumar).

   - Prevent opp_table_lock from being held too long during removal of
     OPP tables with no more active references (Viresh Kumar).

   - Drop redundant semicolon from the Intel RAPL power capping driver
     (Tom Rix)"

* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Resume the device earlier in __device_release_driver()
  PM: runtime: Drop pm_runtime_clean_up_links()
  PM: runtime: Drop runtime PM references to supplier on link removal
  powercap/intel_rapl: remove unneeded semicolon
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

Pull highmem initialization fix from Mike Rapoport:
 "Fix highmem initialization on arm and xtensa

  Recent refactoring of memblock iterators has broken initialization of
  highmem on arm and xtensa because it changed the way beginning and end
  of memory regions are rounded to PFNs. This fix restores the original
  behaviour"

* tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations

Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes"

* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Wake up when sd_glock_disposal becomes zero
  gfs2: Don't call cancel_delayed_work_sync from within delete work function
  gfs2: check for live vs. read-only file system in gfs2_fitrim
  gfs2: don't initialize statfs_change inodes in spectator mode
  gfs2: Split up gfs2_meta_sync into inode and rgrp versions
  gfs2: init_journal's undo directive should also undo the statfs inodes
  gfs2: Add missing truncate_inode_pages_final for sd_aspace
  gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free

Pull PCI fixes from Bjorn Helgaas:

 - Fix ACS regression that broke device pass-through (Rajat Jain)

 - Revert DesignWare ATU memory resource to use last entry to fix
   Tegra194 regression (Rob Herring)

 - Remove duplicate mvebu resource requests to fix regression on Turris
   Omnia (Rob Herring)

* tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix duplicate resource requests
  PCI: dwc: Restore ATU memory resource setup to use last entry
  PCI: Always enable ACS even if no ACS Capability

Check for corner case of port_init failure before using
the port_info pointer.

Fixes: 4d03e00a ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

htmldocs fails with:

drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'

Fixes: 372a1786 ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

* pm-cpufreq:
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set

* pm-cpuidle:
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo

* pm-opp:
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

* powercap:
  powercap/intel_rapl: remove unneeded semicolon

Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839

Fixes: 0439297b ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With commit 669cbc70 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources().  These
are not added by default because they use custom properties rather than
standard DT address translation.

Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc70 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by: vtolkm@googlemail.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>

Prior to commit 0f71c60f ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.

Fixes: 0f71c60f ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.orgReported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

Merge tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-03

The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.

Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.

A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.

Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().

Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.

Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().

Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.

Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.

Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.

Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.

Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().

There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.

Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.

The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.

The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.

* tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  can: j1939: j1939_sk_bind(): return failure if netdev is down
  can: j1939: use backquotes for code samples
  can: j1939: swap addr and pgn in the send example
  can: j1939: fix syntax and spelling
  can: j1939: rename jacd tool
  ...
====================

Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 530b5aff ("spi: fsl-dspi: fix use-after-free in
remove path"), this driver causes a "NULL pointer dereference"
in dspi_suspend/resume.
This is because since this commit, the drivers private data point to
"dspi" instead of "ctlr", the codes in suspend and resume func were
not modified correspondly.

Fixes: 530b5aff ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Steffen Klassert says:

====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
   module is installed. From Xin Long.

2) Fix a race condition between spi allocating and hash list
   resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the kprobe handlers have protection that prohibits other handlers from
executing in other contexts (like if an NMI comes in while processing a
kprobe, and executes the same kprobe, it will get fail with a "busy"
return). Lockdep is unaware of this protection. Use lockdep's nesting api to
differentiate between locks taken in INT3 context and other context to
suppress the false warnings.

Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org

Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

free_highpages() iterates over the free memblock regions in high
memory, and marks each page as available for the memory management
system.

Until commit cddb5ddf ("arm, xtensa: simplify initialization of
high memory pages") it rounded beginning of each region upwards and end of
each region downwards.

However, after that commit free_highmem() rounds the beginning and end of
each region downwards, and we may end up freeing a page that is
memblock_reserve()d, resulting in memory corruption.

Restore the original rounding of the region boundaries to avoid freeing
reserved pages.

Fixes: cddb5ddf ("arm, xtensa: simplify initialization of high memory pages")
Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/
Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.orgSigned-off-by: Ard Biesheuvel <ardb@kernel.org>
Co-developed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

Silence suspicious RCU usage warning in ovs_flow_tbl_masks_cache_resize()
by replacing rcu_dereference() with rcu_dereference_ovsl().

In addition, when creating a new datapath, make sure it's configured under
the ovs_lock.

Fixes: 9bf24f59 ("net: openvswitch: make masks cache size configurable")
Reported-by: syzbot+9a8f8bfcc56e8578016c@syzkaller.appspotmail.com
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160439190002.56943.1418882726496275961.stgit@ebuildSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct skb refcount in alloc_ctrl_skb(), causing skb memleak
when chtls_send_abort() called with NULL skb.
it was always leaking the skb, correct it by incrementing skb
refs by one.

Fixes: cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173909.24826-1-vinay.yadav@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

race between user context and softirq causing memleak,
consider the call sequence scenario

chtls_setkey()         //user context
chtls_peer_close()
chtls_abort_req_rss()
chtls_setkey()         //user context

work request skb queued in chtls_setkey() won't be freed
because resources are already cleaned for this connection,
fix it by not queuing work request while socket is closing.

v1->v2:
- fix W=1 warning.

v2->v3:
- separate it out from another memleak fix.

Fixes: cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173650.24754-1-vinay.yadav@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With below sequence, we can see wakeup default is enabled after re-load module,
if it was enabled before, so we need disable wakeup in flexcan_remove().

| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| disabled
| # echo enabled > /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled
| # rmmod flexcan
| # modprobe flexcan
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled

Fixes: de3578c1 ("can: flexcan: add self wakeup support")
Fixes: 915f9666 ("can: flexcan: add support for DT property 'wakeup-source'")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com
[mkl: streamlined commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.

Fixes: cdce8448 ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-6-qiangqing.zhang@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

After double check with Layerscape CAN owner (Pankaj Bansal), confirm
that LX2160A indeed supports ECC feature, so correct the feature table.

For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.

Fixes: 2c19bb43 ("can: flexcan: add lx2160ar1 support")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-5-qiangqing.zhang@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

After double check with Layerscape CAN owner (Pankaj Bansal), confirm that
LS1021A doesn't support ECC feature, so remove FLEXCAN_QUIRK_DISABLE_MECR
quirk.

Fixes: 99b7668c ("can: flexcan: adding platform specific details for LS1021A")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-4-qiangqing.zhang@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

A break is not needed if it is preceded by a return.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019172412.31143-1-trix@redhat.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c:176:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 875347fe ("can: mcp25xxfd: add regmap infrastructure")
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201019120805.GA63693@ae4257e0ab22Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During debugging it turned out that some people have setups where the SPI
communication is more prone to CRC errors.

Increase the severity of both the transfer retry and transfer failure message
to give users feedback without the need to recompile the driver with debug
enabled.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Link: http://lore.kernel.org/r/20201019190524.1285319-15-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback
frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set
for each outgoing frame written to the IP core so that a copy of each one
will be placed into the rx path. Thus,

- when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a
  previously sent frame,
- when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx
  frame is an echo AND a loopback frame. Therefore, this frame must be
  put into the socket rx path too.

This patch fixes how CAN frames are handled when these are sent while the
can interface is configured in "loopback on" mode.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com
Fixes: 8ac8321e ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential
problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface
(only), related to the fact that a timestamp of an event may precede the
timestamp used for synchronization when both records are part of the same USB
packet. However, this case was used to detect the wrapping of the time counter.

This patch details and fixes the two identified cases where this problem can
occur.
Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com
Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

These values come from skb->data so Smatch considers them untrusted.  I
believe Smatch is correct but I don't have a way to test this.

The usb_if->dev[] array has 2 elements but the index is in the 0-15
range without checks.  The cfd->len can be up to 255 but the maximum
valid size is CANFD_MAX_DLEN (64) so that could lead to memory
corruption.

Fixes: 0a25e1f4 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200813140604.GA456946@mwandaAcked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200605033239.60664-1-navid.emamdoost@gmail.com
Fixes: 4716620d ("can: xilinx: Convert to runtime_pm")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The driver forgets to call clk_disable_unprepare() in error path after
a success calling for clk_prepare_enable().

Fix it by adding a clk_disable_unprepare() in error path.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594973079-27743-1-git-send-email-zhangchangzhong@huawei.com
Fixes: befa6011 ("can: ti_hecc: add missing prepare and unprepare of the clock")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Don't populate the const array plen on the stack but instead it static. Makes
the object code smaller by 926 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  26531	   1943	     64	  28538	   6f7a	net/can/isotp.o

After:
   text	   data	    bss	    dec	    hex	filename
  25509	   2039	     64	  27612	   6bdc	net/can/isotp.o

(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

As reported by Thomas Wagner:

    https://github.com/hartkopp/can-isotp/issues/34

the timeout handling for data frames is not enabled when the isotp socket is
used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled
by the isotpsniffer application which therefore became inconsistend with the
strict rx timeout rules when running the isotp protocol in the operational
mode.

This patch fixes this inconsistency by moving the return condition for the
listen-only mode behind the timeout handling code.
Reported-by: Thomas Wagner <thwa1@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/34
Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.netSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>