Currently "blk_mq_tag_busy" return value has no effect, so adjust it.
Some code implementations have also been adjusted to enhance
readability.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1656170121-1619-1-git-send-email-liusong@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently, IO priority set in task's IO context is not reflected in the
bio->bi_ioprio for most IO (only io_uring and direct IO set it). This
results in odd results where process is submitting some bios with one
priority and other bios with a different (unset) priority and due to
differing priorities bios cannot be merged. Make sure bio->bi_ioprio is
always set on bio submission.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-9-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

Bio's IO priority needs to be initialized before we try to merge the bio
with other bios. Otherwise we could merge bios which would otherwise
receive different IO priorities leading to possible QoS issues.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-8-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

Convert blk-ioprio handling from a rqos policy to a direct call from
blk_mq_submit_bio(). Firstly, blk-ioprio is not much of a rqos policy
anyway, it just needs a hook in bio submission path to set the bio's IO
priority. Secondly, the rqos .track hook gets actually called too late
for blk-ioprio purposes and introducing a special rqos hook just for
blk-ioprio looks even weirder.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-7-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

blkcg->ioprio_set field is not really useful except for avoiding
possibly more expensive checks inside blkcg_ioprio_track(). The check
for blkcg->prio_policy being equal to POLICY_NO_CHANGE does the same
service so just remove the ioprio_set field and replace the check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-6-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

ioprio_get(2) can be asked to return the best IO priority from several
tasks (IOPRIO_WHO_PGRP, IOPRIO_WHO_USER). Currently the call treats
tasks without set IO priority as having priority
IOPRIO_CLASS_BE/IOPRIO_BE_NORM however this does not really reflect the
IO priority the task will get (which depends on task's nice value).

Fix the code to use the real IO priority task's IO will use. We have to
modify code for ioprio_get(IOPRIO_WHO_PROCESS) to keep returning
IOPRIO_CLASS_NONE priority for tasks without set IO priority as a
special case to maintain userspace visible API.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220623074840.5960-5-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

Nobody outside of block/ioprio.c uses it.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-4-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

get_current_ioprio() operates only on current task. We will need the
same functionality for other tasks as well. Generalize
get_current_ioprio() for that and also move the bulk out of the header
file because it is large enough.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-3-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

get_current_ioprio() is used to initialize IO priority of various
requests. As such it should be returning the effective IO priority of
the task (i.e., reflecting the fact that unset IO priority should get
set based on task's CPU priority) so that the conversion is concentrated
in one place.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-2-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit e70344c0 ("block: fix default IO priority handling")
introduced an inconsistency in get_current_ioprio() that tasks without
IO context return IOPRIO_DEFAULT priority while tasks with freshly
allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority.
Tasks without IO context used to be rare before 5a9d041b ("block:
move io_context creation into where it's needed") but after this commit
they became common because now only BFQ IO scheduler setups task's IO
context. Similar inconsistency is there for get_task_ioprio() so this
inconsistency is now exposed to userspace and userspace will see
different IO priority for tasks operating on devices with BFQ compared
to devices without BFQ. Furthemore the changes done by commit
e70344c0 change the behavior when no IO priority is set for BFQ IO
scheduler which is also documented in ioprio_set(2) manpage:

"If no I/O scheduler has been set for a thread, then by default the I/O
priority will follow the CPU nice value (setpriority(2)).  In Linux
kernels before version 2.6.24, once an I/O priority had been set using
ioprio_set(), there was no way to reset the I/O scheduling behavior to
the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to
reset to the default I/O scheduling behavior."

So make sure we default to IOPRIO_CLASS_NONE as used to be the case
before commit e70344c0. Also cleanup alloc_io_context() to
explicitely set this IO priority for the allocated IO context to avoid
future surprises. Note that we tweak ioprio_best() to maintain
ioprio_get(2) behavior and make this commit easily backportable.

CC: stable@vger.kernel.org
Fixes: e70344c0 ("block: fix default IO priority handling")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

__blk_mq_delay_run_hw_queue() disables preemption to get a stable
current CPU number and then invokes __blk_mq_run_hw_queue() if the CPU
number is part the mask.

__blk_mq_run_hw_queue() acquires a spin_lock_t which is a sleeping lock
on PREEMPT_RT and can't be acquired with disabled preemption.

It is not required for correctness to invoke __blk_mq_run_hw_queue() on
a CPU matching hctx->cpumask. Both (async and direct requests) can run
on a CPU not matching hctx->cpumask.

The CPU mask without disabling preemption and invoking
__blk_mq_run_hw_queue().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/YrLSEiNvagKJaDs5@linutronix.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix the following warnings:

block/bfq-cgroup.c:721: warning: Function parameter or member 'bfqg' not described in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:721: warning: Excess function parameter 'blkcg' description in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:870: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_leaf_entity'
block/bfq-cgroup.c:900: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_active_queues'

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220617210859.106623-1-bvanassche@acm.org

This patch is the result of the analysis of a sparse report.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220617204433.102022-1-bvanassche@acm.org

It is no need to judge entity is null or not here,
directly return entity is ok, so remove it.
Signed-off-by: GuoYong Zheng <zhenggy@chinatelecom.cn>
Link: https://lore.kernel.org/r/1655461684-19075-1-git-send-email-zhenggy@chinatelecom.cnSigned-off-by: Jens Axboe <axboe@kernel.dk>

blk_queue_get_max_sectors is private to the block layer, so move it out
of blkdev.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Now that blk_max_size_offset has a single caller left, fold it into that
and clean up the naming convention for the local variables there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

get_max_io_size has a very odd choice of variables names and
initialization patterns.  Switch to more descriptive names and more
clear initialization of them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614090934.570632-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

blk_rq_get_max_sectors always uses q->limits.chunk_sectors as the
chunk_sectors argument, and already checks for max_sectors through the
call to blk_queue_get_max_sectors.  That means much of
blk_max_size_offset is not needed and open coding it simplifies the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

max_io_len always passes an explicitly non-zero chunk_sectors into
blk_max_size_offset.  That means much of blk_max_size_offset is not
needed and can be open coded to simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220614090934.570632-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Factor out a helper from blk_max_size_offset so that it can be reused
independently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220614090934.570632-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since the introduction of blk_mq_get_hctx_type() the operation type in
the second argument of blk_mq_get_hctx_type() matters. The introduction
of blk_mq_get_hctx_type() caused blk_mq_get_sq_hctx() to select a
hardware queue of type HCTX_TYPE_READ instead of HCTX_TYPE_DEFAULT.
Switch to hardware queue type HCTX_TYPE_DEFAULT since HCTX_TYPE_READ
should only be used for read requests.

Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220615225549.1054905-4-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Before the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue()
only used the flags from its second argument. Since the introduction of
blk_mq_get_hctx_type(), blk_mq_map_queue() uses both the operation and
the flags encoded in that argument. Rename the second argument of
blk_mq_map_queue() to make this clear.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220615225549.1054905-3-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Leave out the superfluous "& REQ_OP_MASK" code. The definition of req_op()
shows that that code is superfluous:

 #define req_op(req) ((req)->cmd_flags & REQ_OP_MASK)

Compile-tested only.

Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220615225549.1054905-2-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use ida_alloc()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20220615081816.4342-1-liubo03@inspur.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-12-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size. User
space can discover the alignment requirements from the dma_alignment
queue attribute.

User space can specify any hardware compatible DMA offset for each
segment, but every segment length is still required to be a multiple of
the block size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-11-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a convenient function for this repeatable coding pattern.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-10-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The existing iov_iter_alignment() function returns the logical OR of
address and length. For cases where address and length need to be
considered separately, introduce a helper function that a caller can
specificy length and address masks that indicate if the iov is
unaligned.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-9-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Individual bv_len's may not be a sector size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-8-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Individual bv_len's may not be a sector size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220610195830.3574005-7-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This will make it easier to add more complex acceptable alignment
criteria in the future.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-6-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Preparing for upcoming dma_alignment users that have a block_device, but
don't need the request_queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-5-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

User space may want to know how to align their buffers to avoid
bouncing. Export the queue attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-4-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The getting pages setup for zone append and normal IO are identical. Use
common code for each.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-3-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Returning 0 early from __bio_iov_append_get_pages() for the
max_append_sectors warning just creates an infinite loop since 0 means
success, and the bio will never fill from the unadvancing iov_iter. We
could turn the return into an error value, but it will already be turned
into an error value later on, so just remove the warning. Clearly no one
ever hit it anyway.

Fixes: 0512a75b ("block: Introduce REQ_OP_ZONE_APPEND")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220610195830.3574005-2-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Enable ignore_missing_thread in 'perf stat', enabling counting with
   '--pid' when threads disappear during counting session setup

 - Adjust output data offset for backward compatibility in 'perf inject'

 - Fix missing free in copy_kcore_dir() in 'perf inject'

 - Fix caching files with a wrong build ID

 - Sync drm, cpufeatures, vhost and svn headers with the kernel

* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf stat: Enable ignore_missing_thread
  perf inject: Adjust output data offset for backward compatibility
  perf trace beauty: Fix generation of errno id->str table on ALT Linux
  perf build-id: Fix caching files with a wrong build ID
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix missing free in copy_kcore_dir()

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion