- 26 Jul, 2019 40 commits
-
-
Darrick J. Wong authored
commit 1fdeaea4 upstream. Dave Chinner noticed that xfs_file_dio_aio_write returns EAGAIN without dropping the IOLOCK when its deciding not to wait, which means that we leak the IOLOCK there. Since we now make unaligned directio always wait, we have the opportunity to bail out before trying to take the lock, which should reduce the overhead of this never-gonna-work case considerably while also solving the dropped lock problem. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brian Foster authored
commit 2032a8a2 upstream. XFS applies more strict serialization constraints to unaligned direct writes to accommodate things like direct I/O layer zeroing, unwritten extent conversion, etc. Unaligned submissions acquire the exclusive iolock and wait for in-flight dio to complete to ensure multiple submissions do not race on the same block and cause data corruption. This generally works in the case of an aligned dio followed by an unaligned dio, but the serialization is lost if I/Os occur in the opposite order. If an unaligned write is submitted first and immediately followed by an overlapping, aligned write, the latter submits without the typical unaligned serialization barriers because there is no indication of an unaligned dio still in-flight. This can lead to unpredictable results. To provide proper unaligned dio serialization, require that such direct writes are always the only dio allowed in-flight at one time for a particular inode. We already acquire the exclusive iolock and drain pending dio before submitting the unaligned dio. Wait once more after the dio submission to hold the iolock across the I/O and prevent further submissions until the unaligned I/O completes. This is heavy handed, but consistent with the current pre-submission serialization for unaligned direct writes. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Reviewed-by:
-
Luis R. Rodriguez authored
commit 1b9598c8 upstream. statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26 ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26 v4.11-rc6~5^2^2~2 Fixes: 5f955f26 ("xfs: report crtime and attribute flags to statx") Signed-off-by:
-
Darrick J. Wong authored
commit 15a268d9 upstream. Log recovery frees all the inodes stored in the unlinked list, which can cause expansion of the free inode btree. The ifree code skips block reservations if it thinks there's a per-AG space reservation, but we don't set up the reservation until after log recovery, which means that a finobt expansion blows up in xfs_trans_mod_sb when we exceed the transaction's block reservation. To fix this, we set the "no finobt reservation" flag to true when we create the xfs_mount and only set it to false if we confirm that every AG had enough free space to put aside for the finobt. Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
-
Darrick J. Wong authored
commit c4a6bf7f upstream. When XFS creates an O_TMPFILE file, the inode is created with nlink = 1, put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile. If we crash before anything logs the inode (it's dirty incore but the vfs doesn't tell us it's dirty so we never log that change), the iunlink processing part of recovery will then explode with a pile of: XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file: fs/xfs/xfs_log_recover.c, line: 5072 Worse yet, since nlink is nonzero, the inodes also don't get cleaned up and they just leak until the next xfs_repair run. Therefore, change xfs_iunlink to require that inodes being put on the unlinked list have nlink == 0, change the tmpfile callers to instantiate nodes that way, and set the nlink to 1 just prior to calling d_tmpfile. Fix the comment for xfs_iunlink while we're at it. Signed-off-by:
-
Darrick J. Wong authored
commit e1f6ca11 upstream. Rename this flag variable to imply more strongly that it's related to the free inode btree (finobt) operation. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
commit 3b50086f upstream. For VFS listxattr calls, xfs_xattr_put_listent calls __xfs_xattr_put_listent twice if it sees an attribute "trusted.SGI_ACL_FILE": once for that name, and again for "system.posix_acl_access". Unfortunately, if we happen to run out of buffer space while emitting the first name, we set count to -1 (so that we can feed ERANGE to the caller). The second invocation doesn't check that the context parameters make sense and overwrites the byte before the buffer, triggering a KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in strncpy+0xb3/0xd0 Write of size 1 at addr ffff88807fbd317f by task syz/1113 CPU: 3 PID: 1113 Comm: syz Not tainted 5.0.0-rc6-xfsx #rc6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xcc/0x180 print_address_description+0x6c/0x23c kasan_report.cold.3+0x1c/0x35 strncpy+0xb3/0xd0 __xfs_xattr_put_listent+0x1a9/0x2c0 [xfs] xfs_attr_list_int_ilocked+0x11af/0x1800 [xfs] xfs_attr_list_int+0x20c/0x2e0 [xfs] xfs_vn_listxattr+0x225/0x320 [xfs] listxattr+0x11f/0x1b0 path_listxattr+0xbd/0x130 do_syscall_64+0x139/0x560 While we're at it we add an assert to the other put_listent to avoid this sort of thing ever happening to the attrlist_by_handle code. Signed-off-by:
-
Dave Chinner authored
commit 2c307174 upstream. On a sub-page block size filesystem, fsx is failing with a data corruption after a series of operations involving copying a file with the destination offset beyond EOF of the destination of the file: 8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW 8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes) 8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400 8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE 8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00 The second copy here is beyond EOF, and it is to sub-page (4k) but block aligned (1k) offset. The clone runs the EOF zeroing, landing in a pre-existing post-eof delalloc extent. This zeroes the post-eof extents in the page cache just fine, dirtying the pages correctly. The problem is that xfs_reflink_remap_prep() now truncates the page cache over the range that it is copying it to, and rounds that down to cover the entire start page. This removes the dirty page over the delalloc extent from the page cache without having written it back. Hence later, when the page cache is flushed, the page at offset 0x6f000 has not been written back and hence exposes stale data, which fsx trips over less than 10 operations later. Fix this by changing xfs_reflink_remap_prep() to use xfs_flush_unmap_range(). Signed-off-by:
-
Darrick J. Wong authored
commit 4918ef4e upstream. Prior to remapping blocks, it is necessary to remove pages from the destination file's page cache. Unfortunately, the truncation is not aggressive enough -- if page size > block size, we'll end up zeroing subpage blocks instead of removing them. So, round the start offset down and the end offset up to page boundaries. We already wrote all the dirty data so the larger range shouldn't be a problem. Signed-off-by:
-
Drew Davenport authored
commit 6b15f678 upstream. For architectures using __WARN_TAINT, the WARN_ON macro did not print out the "cut here" string. The other WARN_XXX macros would print "cut here" inside __warn_printk, which is not called for WARN_ON since it doesn't have a message to print. Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org Fixes: a7bed27a ("bug: fix "cut here" location for __WARN_TAINT architectures") Signed-off-by:
Drew Davenport <ddavenport@chromium.org> Acked-by:
Kees Cook <keescook@chromium.org> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Harkes authored
commit 7fa0a1da upstream. Patch series "Coda updates". The following patch series is a collection of various fixes for Coda, most of which were collected from linux-fsdevel or linux-kernel but which have as yet not found their way upstream. This patch (of 22): Various file systems expect that vma->vm_file points at their own file handle, several use file_inode(vma->vm_file) to get at their inode or use vma->vm_file->private_data. However the way Coda wrapped mmap on a host file broke this assumption, vm_file was still pointing at the Coda file and the host file systems would scribble over Coda's inode and private file data. This patch fixes the incorrect expectation and wraps vm_ops->open and vm_ops->close to allow Coda to track when the vm_area_struct is destroyed so we still release the reference on the Coda file handle at the right time. Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Williams authored
commit 7e3e888d upstream. At namespace creation time there is the potential for the "expected to be zero" fields of a 'pfn' info-block to be filled with indeterminate data. While the kernel buffer is zeroed on allocation it is immediately overwritten by nd_pfn_validate() filling it with the current contents of the on-media info-block location. For fields like, 'flags' and the 'padding' it potentially means that future implementations can not rely on those fields being zero. In preparation to stop using the 'start_pad' and 'end_trunc' fields for section alignment, arrange for fields that are not explicitly initialized to be guaranteed zero. Bump the minor version to indicate it is safe to assume the 'padding' and 'flags' are zero. Otherwise, this corruption is expected to benign since all other critical fields are explicitly initialized. Note The cc: stable is about spreading this new policy to as many kernels as possible not fixing an issue in those kernels. It is not until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to section alignment" where this improper initialization becomes a problem. So if someone decides to backport "libnvdimm/pfn: Stop padding pmem namespaces to section alignment" (which is not tagged for stable), make sure this pre-requisite is flagged. Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 32ab0a3f ("libnvdimm, pmem: 'struct page' for pmem") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64] Cc: <stable@vger.kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit 68c20cc2 upstream. This affects the 2nd-gen Intuos Pro Medium and Large when using their Bluetooth connection. Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit d4b8efeb upstream. Only sync the pad once per report, not once per collection. Also avoid syncing the pad on battery reports. Fixes: f8b6a747 ("HID: wacom: generic: Support multiple tools per report") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by:
-
Aaron Armstrong Skomra authored
commit d8e98060 upstream. Currently, the driver will attempt to set the mode on all devices with a center button, but some devices with a center button lack LEDs, and attempting to set the LEDs on devices without LEDs results in the kernel error message of the form: "leds input8::wacom-0.1: Setting an LED's brightness failed (-32)" This is because the generic codepath erroneously assumes that the BUTTON_CENTER usage indicates that the device has LEDs, the previously ignored TOUCH_RING_SETTING usage is a more accurate indication of the existence of LEDs on the device. Fixes: 10c55cac ("HID: wacom: generic: support LEDs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Danit Goldberg authored
commit 89705e92 upstream. Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894 ("IB/mlx5: Fill XRQ capabilities") Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Filipe Manana authored
commit 17900668 upstream. If the range for which we are punching a hole covers only part of a page, we end up updating the inode item but we skip the update of the inode's iversion, mtime and ctime. Fix that by ensuring we update those properties of the inode. A patch for fstests test case generic/059 that tests this as been sent along with this fix. Fixes: 2aaa6655 ("Btrfs: add hole punching") Fixes: e8c1c76e ("Btrfs: add missing inode update when punching hole") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit 803f0f64 upstream. In order to avoid searches on a log tree when unlinking an inode, we check if the inode being unlinked was logged in the current transaction, as well as the inode of its parent directory. When any of the inodes are logged, we proceed to delete directory items and inode reference items from the log, to ensure that if a subsequent fsync of only the inode being unlinked or only of the parent directory when the other is not fsync'ed as well, does not result in the entry still existing after a power failure. That check however is not reliable when one of the inodes involved (the one being unlinked or its parent directory's inode) is evicted, since the logged_trans field is transient, that is, it is not stored on disk, so it is lost when the inode is evicted and loaded into memory again (which is set to zero on load). As a consequence the checks currently being done by btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always return true if the inode was evicted before, regardless of the inode having been logged or not before (and in the current transaction), this results in the dentry being unlinked still existing after a log replay if after the unlink operation only one of the inodes involved is fsync'ed. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ xfs_io -c fsync /mnt/dir/foo # Keep an open file descriptor on our directory while we evict inodes. # We just want to evict the file's inode, the directory's inode must not # be evicted. $ ( cd /mnt/dir; while true; do :; done ) & $ pid=$! # Wait a bit to give time to background process to chdir to our test # directory. $ sleep 0.5 # Trigger eviction of the file's inode. $ echo 2 > /proc/sys/vm/drop_caches # Unlink our file and fsync the parent directory. After a power failure # we don't expect to see the file anymore, since we fsync'ed the parent # directory. $ rm -f $SCRATCH_MNT/dir/foo $ xfs_io -c fsync /mnt/dir <power failure> $ mount /dev/sdb /mnt $ ls /mnt/dir foo $ --> file still there, unlink not persisted despite explicit fsync on dir Fix this by checking if the inode has the full_sync bit set in its runtime flags as well, since that bit is set everytime an inode is loaded from disk, or for other less common cases such as after a shrinking truncate or failure to allocate extent maps for holes, and gets cleared after the first fsync. Also consider the inode as possibly logged only if it was last modified in the current transaction (besides having the full_fsync flag set). Fixes: 3a5f1d45 ("Btrfs: Optimize btree walking while logging inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Filipe Manana authored
commit d1d832a0 upstream. When we log an inode, regardless of logging it completely or only that it exists, we always update it as logged (logged_trans and last_log_commit fields of the inode are updated). This is generally fine and avoids future attempts to log it from having to do repeated work that brings no value. However, if we write data to a file, then evict its inode after all the dealloc was flushed (and ordered extents completed), rename the file and fsync it, we end up not logging the new extents, since the rename may result in logging that the inode exists in case the parent directory was logged before. The following reproducer shows and explains how this can happen: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ touch /mnt/dir/bar # Do a direct IO write instead of a buffered write because with a # buffered write we would need to make sure dealloc gets flushed and # complete before we do the inode eviction later, and we can not do that # from user space with call to things such as sync(2) since that results # in a transaction commit as well. $ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar # Keep the directory dir in use while we evict inodes. We want our file # bar's inode to be evicted but we don't want our directory's inode to # be evicted (if it were evicted too, we would not be able to reproduce # the issue since the first fsync below, of file foo, would result in a # transaction commit. $ ( cd /mnt/dir; while true; do :; done ) & $ pid=$! # Wait a bit to give time for the background process to chdir. $ sleep 0.1 # Evict all inodes, except the inode for the directory dir because it is # currently in use by our background process. $ echo 2 > /proc/sys/vm/drop_caches # fsync file foo, which ends up persisting information about the parent # directory because it is a new inode. $ xfs_io -c fsync /mnt/dir/foo # Rename bar, this results in logging that this inode exists (inode item, # names, xattrs) because the parent directory is in the log. $ mv /mnt/dir/bar /mnt/dir/baz # Now fsync baz, which ends up doing absolutely nothing because of the # rename operation which logged that the inode exists only. $ xfs_io -c fsync /mnt/dir/baz <power failure> $ mount /dev/sdb /mnt $ od -t x1 -A d /mnt/dir/baz 0000000 --> Empty file, data we wrote is missing. Fix this by not updating last_sub_trans of an inode when we are logging only that it exists and the inode was not yet logged since it was loaded from disk (full_sync bit set), this is enough to make btrfs_inode_in_log() return false for this scenario and make us log the inode. The logged_trans of the inode is still always setsince that alone is used to track if names need to be deleted as part of unlink operations. Fixes: 257c62e1 ("Btrfs: avoid tree log commit when there are no changes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Niklas Cassel authored
commit 64adde31 upstream. Currently, there is only a 1 ms sleep after asserting PERST. Reading the datasheets for different endpoints, some require PERST to be asserted for 10 ms in order for the endpoint to perform a reset, others require it to be asserted for 50 ms. Several SoCs using this driver uses PCIe Mini Card, where we don't know what endpoint will be plugged in. The PCI Express Card Electromechanical Specification r2.0, section 2.2, "PERST# Signal" specifies: "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from the power rails achieving specified operating limits." Add a sleep of 100 ms before deasserting PERST, in order to ensure that we are compliant with the spec. Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by:
-
Mika Westerberg authored
commit 000dd531 upstream. PME polling does not take into account that a device that is directly connected to the host bridge may go into D3cold as well. This leads to a situation where the PME poll thread reads from a config space of a device that is in D3cold and gets incorrect information because the config space is not accessible. Here is an example from Intel Ice Lake system where two PCIe root ports are in D3cold (I've instrumented the kernel to log the PMCSR register contents): [ 62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff [ 62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff Since 0xffff is interpreted so that PME is pending, the root ports will be runtime resumed. This repeats over and over again essentially blocking all runtime power management. Prevent this from happening by checking whether the device is in D3cold before its PME status is read. Fixes: 71a83bd7 ("PCI/PM: add runtime PM support to PCIe port") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Cc: 3.6+ <stable@vger.kernel.org> # v3.6+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dexuan Cui authored
commit 4df591b2 upstream. Fix a use-after-free in hv_eject_device_work(). Fixes: 05f151a7 ("PCI: hv: Fix a memory leak in hv_eject_device_work()") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Shishkin authored
commit 4aa5aed2 upstream. This adds Ice Lake NNPI support to the Intel(R) Trace Hub. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190621161930.60785-5-alexander.shishkin@linux.intel.comSigned-off-by:
-
Andres Rodriguez authored
commit e28ad544 upstream. DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different. This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity. This change fixes audio support for the Valve Index HMD. Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
-
Kim Phillips authored
commit 2f217d58 upstream. Fill in the L3 performance event select register ThreadMask bitfield, to enable per hardware thread accounting. Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Gary Hook <Gary.Hook@amd.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liska <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Stephane Eranian <eranian@google.com> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20190628215906.4276-2-kim.phillips@amd.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kim Phillips authored
commit 16f46411 upstream. The following commit: d7cbbe49 ("perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events") enables L3 PMC events for all threads and slices by writing 1's in 'ChL3PmcCfg' (L3 PMC PERF_CTL) register fields. Those bitfields overlap with high order event select bits in the Data Fabric PMC control register, however. So when a user requests raw Data Fabric events (-e amd_df/event=0xYYY/), the two highest order bits get inadvertently set, changing the counter select to events that don't exist, and for which no counts are read. This patch changes the logic to write the L3 masks only when dealing with L3 PMC counters. AMD Family 16h and below Northbridge (NB) counters were not affected. Signed-off-by:
-
Kan Liang authored
commit e4557c1a upstream. If a user first sample a PEBS event on a fixed counter, then sample a non-PEBS event on the same fixed counter on Icelake, it will trigger spurious NMI. For example: perf record -e 'cycles:p' -a perf record -e 'cycles' -a The error message for spurious NMI: [June 21 15:38] Uhhuh. NMI received for unknown reason 30 on CPU 2. [ +0.000000] Do you have a strange power saving mode enabled? [ +0.000000] Dazed and confused, but trying to continue The bug was introduced by the following commit: commit 6f55967a ("perf/x86/intel: Fix race in intel_pmu_disable_event()") The commit moves the intel_pmu_pebs_disable() after intel_pmu_disable_fixed(), which returns immediately. The related bit of PEBS_ENABLE MSR will never be cleared for the fixed counter. Then a non-PEBS event runs on the fixed counter, but the bit on PEBS_ENABLE is still set, which triggers spurious NMIs. Check and disable PEBS for fixed counters after intel_pmu_disable_fixed(). Reported-by:
Yi, Ammy <ammy.yi@intel.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 6f55967a ("perf/x86/intel: Fix race in intel_pmu_disable_event()") Link: https://lkml.kernel.org/r/20190625142135.22112-1-kan.liang@linux.intel.comSigned-off-by:
-
David Rientjes authored
commit e74bd969 upstream. When default_get_smp_config() is called with early == 1 and mpf->feature1 is non-zero, mpf is leaked because the return path does not do early_memunmap(). Fix this and share a common exit routine. Fixes: 5997efb9 ("x86/boot: Use memremap() to map the MPF and MPC data") Reported-by:
Cfir Cohen <cfir@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.comSigned-off-by:
-
YueHaibing authored
commit d4548543 upstream. KASAN report this: BUG: unable to handle kernel paging request at ffffffffa0097000 PGD 3870067 P4D 3870067 PUD 3871063 PMD 2326e2067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_add_valid+0x10/0x70 Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a RSP: 0018:ffffc90000e23c68 EFLAGS: 00010246 RAX: ffffffffa00ad000 RBX: ffffffffa009d000 RCX: 0000000000000000 RDX: ffffffffa0097000 RSI: ffffffffa0097000 RDI: ffffffffa009d000 RBP: ffffc90000e23c68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0097000 R13: ffff888231797180 R14: 0000000000000000 R15: ffffc90000e23e78 FS: 00007fb215285540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0097000 CR3: 000000022f144000 CR4: 00000000000006f0 Call Trace: v9fs_register_trans+0x2f/0x60 [9pnet ? 0xffffffffa0087000 p9_virtio_init+0x25/0x1000 [9pnet_virtio do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb214d8e839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 RSP: 002b:00007ffc96554278 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055e67eed2aa0 RCX: 00007fb214d8e839 RDX: 0000000000000000 RSI: 000055e67ce95c2e RDI: 0000000000000003 RBP: 000055e67ce95c2e R08: 0000000000000000 R09: 000055e67eed2aa0 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 000055e67eeda500 R14: 0000000000040000 R15: 000055e67eed2aa0 Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio CR2: ffffffffa0097000 ---[ end trace 4a52bb13ff07b761 If register_virtio_driver() fails in p9_virtio_init, we should call v9fs_unregister_trans() to do cleanup. Link: http://lkml.kernel.org/r/20190430115942.41840-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: b530cc79 ("9p: add virtio transport") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
YueHaibing authored
commit 80a316ff upstream. If xenbus_register_frontend() fails in p9_trans_xen_init, we should call v9fs_unregister_trans() to do cleanup. Link: http://lkml.kernel.org/r/20190430143933.19368-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Fixes: 868eb122 ("xen/9pfs: introduce Xen 9pfs transport driver") Signed-off-by:
-
Juergen Gross authored
commit bce5963b upstream. When binding an interdomain event channel to a vcpu via IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be bound, but the affinity of the associated IRQi must be changed, too. Otherwise the IRQ and the event channel won't be moved to another vcpu in case the original vcpu they were bound to is going offline. Cc: <stable@vger.kernel.org> # 4.13 Fixes: c48f64ab ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU") Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Damien Le Moal authored
commit 3b8cafdd upstream. dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the backend device is being actively read or written and so cannot be reclaimed. This flag is set as long as the zone atomic reference counter is not 0. When this atomic is decremented and reaches 0 (e.g. on BIO completion), the active flag is cleared and set again whenever the zone is reused and BIO issued with the atomic counter incremented. These 2 operations (atomic inc/dec and flag set/clear) are however not always executed atomically under the target metadata mutex lock and this causes the warning: WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags)); in dmz_deactivate_zone() to be displayed. This problem is regularly triggered with xfstests generic/209, generic/300, generic/451 and xfs/077 with XFS being used as the file system on the dm-zoned target device. Similarly, xfstests ext4/303, ext4/304, generic/209 and generic/300 trigger the warning with ext4 use. This problem can be easily fixed by simply removing the DMZ_ACTIVE flag and managing the "ACTIVE" state by directly looking at the reference counter value. To do so, the functions dmz_activate_zone() and dmz_deactivate_zone() are changed to inline functions respectively calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro is changed to an inline function calling atomic_read(). Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Reported-by:
Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Daniel Jordan authored
commit cf144f81 upstream. Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec ("padata: Generic parallelization/serialization interface") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Lyude Paul authored
commit 7cb95eee upstream. It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by:
Lyude Paul <lyude@redhat.com> Tested-by:
Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
commit 8e2442a5 upstream. Since commit 00c864f8 ("kconfig: allow all config targets to write auto.conf if missing"), Kconfig creates include/config/auto.conf in the defconfig stage when it is missing. Joonas Kylmälä reported incorrect auto.conf generation under some circumstances. To reproduce it, apply the following diff: | --- a/arch/arm/configs/imx_v6_v7_defconfig | +++ b/arch/arm/configs/imx_v6_v7_defconfig | @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y | CONFIG_USB_CONFIGFS_F_HID=y | CONFIG_USB_CONFIGFS_F_UVC=y | CONFIG_USB_CONFIGFS_F_PRINTER=y | -CONFIG_USB_ZERO=m | -CONFIG_USB_AUDIO=m | -CONFIG_USB_ETH=m | -CONFIG_USB_G_NCM=m | -CONFIG_USB_GADGETFS=m | -CONFIG_USB_FUNCTIONFS=m | -CONFIG_USB_MASS_STORAGE=m | -CONFIG_USB_G_SERIAL=m | +CONFIG_USB_FUNCTIONFS=y | CONFIG_MMC=y | CONFIG_MMC_SDHCI=y | CONFIG_MMC_SDHCI_PLTFM=y And then, run: $ make ARCH=arm mrproper imx_v6_v7_defconfig You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the .config, but not in the auto.conf. Please note drivers/usb/gadget/legacy/Kconfig is included from a choice block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value. This is probably a similar situation described in commit beaaddb6 ("kconfig: tests: test defconfig when two choices interact"). When sym_calc_choice() is called, the choice symbol forgets the SYMBOL_DEF_USER unless all of its choice values are explicitly set by the user. The choice symbol is given just one chance to recall it because set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES is set. When sym_calc_choice() is called again, the choice symbol forgets it forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid. Hence, we cannot call sym_clear_all_valid() again and again. It is crazy to repeat set and unset of internal flags. However, we cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;" Doing so would re-introduce the problem solved by commit 5d09598d ("kconfig: fix new choices being skipped upon config update"). To work around the issue, conf_write_autoconf() stopped calling sym_clear_all_valid(). conf_write() must be changed accordingly. Currently, it clears SYMBOL_WRITE after the symbol is written into the .config file. This is needed to prevent it from writing the same symbol multiple times in case the symbol is declared in two or more locations. I added the new flag SYMBOL_WRITTEN, to track the symbols that have been written. Anyway, this is a cheesy workaround in order to suppress the issue as far as defconfig is concerned. Handling of choices is totally broken. sym_clear_all_valid() is called every time a user touches a symbol from the GUI interface. To reproduce it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear from the .config file. I added the Fixes tag since it is more fatal than before. But, this has been broken since long long time before, and still it is. We should take a closer look to fix this correctly somehow. Fixes: 00c864f8 ("kconfig: allow all config targets to write auto.conf if missing") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Reported-by:
Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
-
Radoslaw Burny authored
commit 5ec27ec7 upstream. Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357 (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by:
Radoslaw Burny <rburny@google.com> Acked-by:
-
Jon Hunter authored
commit ba24eee6 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Fixes: bcdbde43 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Like Xu authored
commit 6fc3977c upstream. If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sakari Ailus authored
commit 14f28f5c upstream. buf->size is an unsigned long; casting that to int will lead to an overflow if buf->size exceeds INT_MAX. Fix this by changing the type to unsigned long instead. This is possible as the buf->size is always aligned to PAGE_SIZE, and therefore the size will never have values lesser than 0. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sakari Ailus authored
commit defcdc5d upstream. PAGE_ALIGN() may wrap the buffer size around to 0. Prevent this by checking that the aligned value is not smaller than the unaligned one. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
-
