- 16 Dec, 2007 5 commits
-
-
Vlad Yasevich authored
At the end of partial delivery, we may have complete messages sitting on the fragment queue. These messages are stuck there until a new fragment arrives. This can comletely stall a given association. When clearing partial delivery state, flush any complete messages from the fragment queue and send them on their way up. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Bernard Pidoux reported these lockdep warnings: [ INFO: possible irq lock inversion dependency detected ] 2.6.23.1 #1 --------------------------------------------------------- fpac/4933 just changed the state of lock: (slock-AF_AX25){--..}, at: [<d8be3312>] ax25_disconnect+0x46/0xaf [ax25] but this lock was taken by another, soft-irq-safe lock in the past: (ax25_list_lock){-+..} and interrupts could create inverse lock ordering between them. [...] [ INFO: inconsistent lock state ] 2.6.23.1 #1 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes: (slock-AF_AX25){-+..}, at: [<d8b79312>] ax25_disconnect+0x46/0xaf [ax25] [...] This means slock-AF_AX25 could be taken both from softirq and process context with softirqs enabled, so it's endangered itself, but also makes ax25_list_lock vulnerable. It was not 100% verified if the real lockup can happen, but this fix isn't very costly and looks safe anyway. (It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.) Reported_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Tested_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Satoru SATOH authored
tcp_input_metrics() refers to the built-time constant TCP_RTO_MIN regardless of configured minimum RTO with iproute2. Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
If CONFIG_NETFILTER if not selected when compile the kernel source code, ipv6_getsockopt will returen an EINVAL error if optname is not supported by the kernel. But if CONFIG_NETFILTER is selected, ENOPROTOOPT error will be return. This patch fix to always return ENOPROTOOPT error if optname argument of ipv6_getsockopt is not supported by the kernel. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Assigning a valid random address to bridge device solves problems when bridge device is brought up before adding real device to bridge. When the first real device is added to the bridge, it's address will overide the bridges random address. Note: any device added to a bridge must already have a valid ethernet address. br_add_if -> br_fdb_insert -> fdb_insert -> is_valid_ether_addr Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Dec, 2007 9 commits
-
-
Amos Waterland authored
The difference between ip=off and ip=::::::off has been a cause of much confusion. Document how each behaves, and do not contradict ourselves by saying that "off" is the default when in fact "any" is the default and is descibed as being so lower in the file. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom "spot" Callaway authored
gcc throws these warnings with: CONFIG_ATM_FORE200E=m # CONFIG_ATM_FORE200E_PCA is not set drivers/atm/fore200e.c:2695: warning: 'fore200e_pca_detect' defined but not used drivers/atm/fore200e.c:2748: warning: 'fore200e_pca_remove_one' defined but not used By moving the #ifdef CONFIG_ATM_FORE200E_PCA around those two functions, the compiler warnings are silenced. Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
As reported by Damien Thebault, the double POSTROUTING hook invocation fix caused outgoing packets routed between two bridges to appear without a link-layer header. The reason for this is that we're skipping the br_nf_post_routing hook for routed packets now and don't save the original link layer header, but nevertheless tries to restore it on output, causing corruption. The root cause for this is that skb->nf_bridge has no clearly defined lifetime and is used to indicate all kind of things, but that is quite complicated to fix. For now simply don't touch these packets and handle them like packets from any other device. Tested-by: Damien Thebault <damien.thebault@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Al Viro authored
* trivial annotations * long != 32bit, use __be32 * wrong endianness in sending CISCO_ADDR_REPLY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
As noted by Kevin, tipc's release() does down_interruptible() and ignores the return value. So if signal_pending() we'll end up doing up() on a non-downed semaphore. Fix. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In order to avoid jiffies wraparound and its effect, special care must be taken when doing comparisons ... Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
Currently the IPsec protocol SPI values are written to the audit log in network byte order which is different from almost all other values which are recorded in host byte order. This patch corrects this inconsistency by writing the SPI values to the audit record in host byte order. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
When copying entries to user, the kernel makes two passes through the data, first copying all the entries, then fixing up names and counters. On the second pass it copies the kernel and match data from userspace to the kernel again to find the corresponding structures, expecting that kernel pointers contained in the data are still valid. This is obviously broken, fix by avoiding the second pass completely and fixing names and counters while dumping the ruleset, using the kernel-internal data structures. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch is a fix. It sets IPS_EXPECTED for related conntracks. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Dec, 2007 12 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix endless loop in cheetah_xcall_deliver(). [SERIAL] sparc: Infrastructure to fix section mismatch bugs.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/isp1301_omap: Build fix i2c: Add missing spaces in split log messages i2c-gpio: Initialize adapter class i2c: Delete an outdated piece of documentation
-
David S. Miller authored
We need to mask out the proper bits when testing the dispatch status register else we can see unrelated NACK bits from previous cross call sends. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Habets authored
This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Brownell authored
Build fix to the isp1301_omap driver ... this driver gets built more often in the OMAP tree than in mainline, partly because the defconfig for H2 (plus probably H3 and H4) needs updating. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Atsushi Nemoto authored
This is required to let hwmon drivers attach to the adapter. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
I'm amazed that this old piece of documentation managed to survive until today. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Mauro Carvalho Chehab authored
videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by a previous patch. However, videobuf_dvb needs this. This patch re-adds videobuf_read_start, doing the proper lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Linus Torvalds authored
This reverts commit 70eba18b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: Roland Dreier <rdreier@cisco.com> Requested-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Adrian Bunk authored
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Adrian Bunk authored
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 11 Dec, 2007 14 commits
-
-
Mauro Carvalho Chehab authored
As reported by Andrew Morton: > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Jiri Kosina authored
On Tue, 4 Dec 2007, Ingo Molnar wrote: > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_get_tuner_i2c_master' > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_set_config' Seems like -common part contains also code that is not completely common to all the modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Benoit Istin authored
There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Brandon Philips authored
This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Heikki Lindholm authored
The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hermann Pitton authored
The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Richard Knutsson authored
Complement va_start() with va_end() + minor style fixes in the same function. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Heikki Lindholm authored
The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Chris Pascoe authored
The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Brandon Philips authored
Fallout from videobuf_mmap_setup() locking fixes. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Brandon Philips authored
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Brandon Philips authored
- Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-