- 13 Nov, 2014 40 commits
-
-
Lv Zheng authored
commit 79149001 upstream. It is reported that Samsung laptops that need to poll events are broken by the following commit: Commit 3afcf2ec Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set The behaviors of the 2 vendor firmwares are conflict: 1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware automatically sets SCI_EVT as long as there is event queued up. 2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware returns 0 when there is no event queued up. This patch is a quick fix to distinguish the behaviors to make Acer behavior only effective for Acer EC firmware so that the breakages on Samsung EC firmware can be avoided. Fixes: 3afcf2ec (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161Reported-and-tested-by:
Ortwin Glück <odi@odi.ch> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> [ rjw : Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Dexuan Cui authored
commit d1cd1210 upstream. pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long << PAGE_SHIFT" will overflow for PFNs above 4GB. Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V, with 5GB memory assigned, can't load the netvsc driver successfully and hence the synthetic network device can't work (we can use the kernel parameter mem=3000M to work around the issue). Cast pte_pfn() to phys_addr_t before shifting. Fixes: "commit d7656534: x86, mm: Create slow_virt_to_phys()" Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: linux-mm@kvack.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: dave.hansen@intel.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
jens stein authored
commit b2a9601c upstream. commit c675949e Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT prevents backlight setup on Macbook 2,1. Apply quirk to ignore the VBT check so backlight is set up properly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81438Signed-off-by:
Jens Stein Jørgensen <jens.s.stein@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ian Abbott authored
commit 238b5ad8 upstream. As a follow-up to commit 6cab7a37 ("staging: comedi: (regression) channel list must be set for COMEDI_CMD ioctl"), Hartley Sweeten pointed out another couple of bugs stemming from commit 6cab7a37 ("staging: comedi: comedi_fops: introduce __comedi_get_user_chanlist()"). Firstly, `do_cmdtest_ioctl()` never frees the kernel copy of the user chanlist allocated by `__comedi_get_user_chanlist()`, so that memory is leaked. Fix it by freeing the allocated kernel memory pointed to by `cmd.chanlist` before that pointer is overwritten with its original pointer to user memory before `cmd` is copied back to user-space. Secondly, if `__comedi_get_user_chanlist()` returns an error, `cmd->chanlist` is left unchanged and in fact will be a pointer to user memory. This causes `do_cmd_ioctl()` to `goto cleanup` and call `do_become_nonbusy()` which would attempt to free the memory pointed to by the user-space pointer. Fix it by setting `cmd->chanlist` to NULL at the start of `__comedi_get_user_chanlist()`. Fixes: c6cd0eef ("staging: comedi: comedi_fops: introduce __comedi_get_user_chanlist()") Reported-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Will Deacon authored
commit ce9ec37b upstream. When unmapping a range of pages in zap_pte_range, the page being unmapped is added to an mmu_gather_batch structure for asynchronous freeing. If we run out of space in the batch structure before the range has been completely unmapped, then we break out of the loop, force a TLB flush and free the pages that we have batched so far. If there are further pages to unmap, then we resume the loop where we left off. Unfortunately, we forget to update addr when we break out of the loop, which causes us to truncate the range being invalidated as the end address is exclusive. When we re-enter the loop at the same address, the page has already been freed and the pte_present test will fail, meaning that we do not reconsider the address for invalidation. This patch fixes the problem by incrementing addr by the PAGE_SIZE before breaking out of the loop on batch failure. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
commit 8c3e4347 upstream. 0x4c6e is a secondary device id so should not be used by the driver. Noticed-by:
Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 72b3f918 upstream. - bapm seems to cause CPU stuck messages so disable it. - nb dpm seems to prevent GPU dpm from getting enabled, so disable it. bug: https://bugs.freedesktop.org/show_bug.cgi?id=85107Signed-off-by:
-
Alex Deucher authored
commit 6e909f74 upstream. Add a module paramter to enable bapm on APUs. It's disabled by default on certain APUs due to stability issues. This option makes it easier to test and to enable it on systems that are stable. bug: https://bugzilla.kernel.org/show_bug.cgi?id=81021Signed-off-by:
-
Michel Dänzer authored
commit e5a5fd4d upstream. Should avoid kmalloc failures due to large number of array entries. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81991Reviewed-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6fa45593 upstream. Causes problems on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=82889Signed-off-by:
-
Dmitry Kasatkin authored
commit 3b1deef6 upstream. evm_inode_setxattr() can be called with no value. The function does not check the length so that following command can be used to produce the kernel oops: setfattr -n security.evm FOO. This patch fixes it. Changes in v3: * there is no reason to return different error codes for EVM_XATTR_HMAC and non EVM_XATTR_HMAC. Remove unnecessary test then. Changes in v2: * testing for validity of xattr type [ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1106.398192] IP: [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.399244] PGD 29048067 PUD 290d7067 PMD 0 [ 1106.399953] Oops: 0000 [#1] SMP [ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse [ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936 [ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 1106.400020] task: ffff8800291a0000 ti: ffff88002917c000 task.ti: ffff88002917c000 [ 1106.400020] RIP: 0010:[<ffffffff812af7b8>] [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP: 0018:ffff88002917fd50 EFLAGS: 00010246 [ 1106.400020] RAX: 0000000000000000 RBX: ffff88002917fdf8 RCX: 0000000000000000 [ 1106.400020] RDX: 0000000000000000 RSI: ffffffff818136d3 RDI: ffff88002917fdf8 [ 1106.400020] RBP: ffff88002917fd68 R08: 0000000000000000 R09: 00000000003ec1df [ 1106.400020] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800438a0a00 [ 1106.400020] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 1106.400020] FS: 00007f7dfa7d7740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000 [ 1106.400020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1106.400020] CR2: 0000000000000000 CR3: 000000003763e000 CR4: 00000000000006f0 [ 1106.400020] Stack: [ 1106.400020] ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98 [ 1106.400020] ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000 [ 1106.400020] 0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8 [ 1106.400020] Call Trace: [ 1106.400020] [<ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a [ 1106.400020] [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f [ 1106.400020] [<ffffffff8116d1e0>] setxattr+0x122/0x16c [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143 [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f [ 1106.400020] [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0 [ 1106.400020] [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b [ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83 [ 1106.400020] RIP [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP <ffff88002917fd50> [ 1106.400020] CR2: 0000000000000000 [ 1106.428061] ---[ end trace ae08331628ba3050 ]--- Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Kasatkin authored
commit a48fda9d upstream. ima_inode_setxattr() can be called with no value. Function does not check the length so that following command can be used to produce kernel oops: setfattr -n security.ima FOO. This patch fixes it. Changes in v3: * for stable reverted "allow setting hash only in fix or log mode" It will be a separate patch. Changes in v2: * testing validity of xattr type * allow setting hash only in fix or log mode (Mimi) [ 261.562522] BUG: unable to handle kernel NULL pointer dereference at (null) [ 261.564109] IP: [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a [ 261.564109] PGD 3112f067 PUD 42965067 PMD 0 [ 261.564109] Oops: 0000 [#1] SMP [ 261.564109] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse [ 261.564109] CPU: 0 PID: 3299 Comm: setxattr Not tainted 3.16.0-kds+ #2924 [ 261.564109] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 261.564109] task: ffff8800428c2430 ti: ffff880042be0000 task.ti: ffff880042be0000 [ 261.564109] RIP: 0010:[<ffffffff812af272>] [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a [ 261.564109] RSP: 0018:ffff880042be3d50 EFLAGS: 00010246 [ 261.564109] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000015 [ 261.564109] RDX: 0000001500000000 RSI: 0000000000000000 RDI: ffff8800375cc600 [ 261.564109] RBP: ffff880042be3d68 R08: 0000000000000000 R09: 00000000004d6256 [ 261.564109] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002149ba00 [ 261.564109] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 261.564109] FS: 00007f6c1e219740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000 [ 261.564109] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 261.564109] CR2: 0000000000000000 CR3: 000000003b35a000 CR4: 00000000000006f0 [ 261.564109] Stack: [ 261.564109] ffff88002149ba00 ffff880042be3df8 0000000000000000 ffff880042be3d98 [ 261.564109] ffffffff812a101b ffff88002149ba00 ffff880042be3df8 0000000000000000 [ 261.564109] 0000000000000000 ffff880042be3de0 ffffffff8116d08a ffff880042be3dc8 [ 261.564109] Call Trace: [ 261.564109] [<ffffffff812a101b>] security_inode_setxattr+0x48/0x6a [ 261.564109] [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f [ 261.564109] [<ffffffff8116d1e0>] setxattr+0x122/0x16c [ 261.564109] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 261.564109] [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143 [ 261.564109] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 261.564109] [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f [ 261.564109] [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0 [ 261.564109] [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b [ 261.564109] Code: 48 89 f7 48 c7 c6 58 36 81 81 53 31 db e8 73 27 04 00 85 c0 75 28 bf 15 00 00 00 e8 8a a5 d9 ff 84 c0 75 05 83 cb ff eb 15 31 f6 <41> 80 7d 00 03 49 8b 7c 24 68 40 0f 94 c6 e8 e1 f9 ff ff 89 d8 [ 261.564109] RIP [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a [ 261.564109] RSP <ffff880042be3d50> [ 261.564109] CR2: 0000000000000000 [ 261.599998] ---[ end trace 39a89a3fc267e652 ]--- Reported-by:
-
Takashi Iwai authored
commit 317168d0 upstream. In compat mode, we copy each field of snd_pcm_status struct but don't touch the reserved fields, and this leaves uninitialized values there. Meanwhile the native ioctl does zero-clear the whole structure, so we should follow the same rule in compat mode, too. Reported-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Christoph Hellwig authored
commit e999dbc2 upstream. This reverts commit fb3ccb5d. SCSI-2/SPI actually needs the tagged/untagged flag in the request to work properly. Revert this patch and add a follow on to set it in the right place. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
Imre Deak authored
commit 94fb823f upstream. If a device's dev_pm_ops::freeze callback fails during the QUIESCE phase, we don't rollback things correctly calling the thaw and complete callbacks. This could leave some devices in a suspended state in case of an error during resuming from hibernation. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
commit 246ef766 upstream. If an asynchronous suspend_late or freeze_late callback fails during the SUSPEND, FREEZE or QUIESCE phases, we don't propagate the corresponding error correctly, in effect ignoring the error and continuing the suspend-to-ram/hibernation. During suspend-to-ram this could leave some devices without a valid saved context, leading to a failure to reinitialize them during resume. During hibernation this could leave some devices active interfeering with the creation / restoration of the hibernation image. Also this could leave the corresponding devices without a valid saved context and failure to reinitialize them during resume. Fixes: de377b39 (PM / sleep: Asynchronous threads for suspend_late) Signed-off-by:
-
Christian Vogel authored
commit d1d0b6b6 upstream. snd_bebob_stream_check_internal_clock() may get an id from saffirepro_both_clk_src_get (via clk_src->get()) that was uninitialized. a) make logic in saffirepro_both_clk_src_get explicit b) test if id used in snd_bebob_stream_check_internal_clock matches array size [fixed missing signed prefix to *_maps[] by tiwai] Signed-off-by:
Christian Vogel <vogelchr@vogel.cx> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Ville Syrjälä authored
commit f6a19066 upstream. Sometimes we seem to get utter garbage from DPCD reads. The resulting buffer is filled with the same byte, and the operation completed without errors. My HP ZR24w monitor seems particularly susceptible to this problem once it's gone into a sleep mode. The issue seems to happen only for the first AUX message that wakes the sink up. But as the first AUX read we often do is the DPCD receiver cap it does wreak a bit of havoc with subsequent link training etc. when the receiver cap bw/lane/etc. information is garbage. A sufficient workaround seems to be to perform a single byte dummy read before reading the actual data. I suppose that just wakes up the sink sufficiently and we can just throw away the returned data in case it's crap. DP_DPCD_REV seems like a sufficiently safe location to read here. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Todd Previte <tprevite@gmail.com> Signed-off-by:
-
Torsten Fleischer authored
commit 9680b60e upstream. The call of 'kfree(ci->hw_bank.regmap)' in ci_hdrc_remove() sometimes causes a kernel oops when removing the ci_hdrc module. Since there is no separate memory allocated for the ci->hw_bank.regmap array, there is no need to free it. Signed-off-by:
Torsten Fleischer <to-fleischer@t-online.de> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Brian Silverman authored
commit 30a6b803 upstream. free_pi_state and exit_pi_state_list both clean up futex_pi_state's. exit_pi_state_list takes the hb lock first, and most callers of free_pi_state do too. requeue_pi doesn't, which means free_pi_state can free the pi_state out from under exit_pi_state_list. For example: task A | task B exit_pi_state_list | pi_state = | curr->pi_state_list->next | | futex_requeue(requeue_pi=1) | // pi_state is the same as | // the one in task A | free_pi_state(pi_state) | list_del_init(&pi_state->list) | kfree(pi_state) list_del_init(&pi_state->list) | Move the free_pi_state calls in requeue_pi to before it drops the hb locks which it's already holding. [ tglx: Removed a pointless free_pi_state() call and the hb->lock held debugging. The latter comes via a seperate patch ] Signed-off-by:
Brian Silverman <bsilver16384@gmail.com> Cc: austin.linux@gmail.com Cc: darren@dvhart.com Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1414282837-23092-1-git-send-email-bsilver16384@gmail.comSigned-off-by:
-
Mathias Krause authored
commit 6891c450 upstream. If userland creates a timer without specifying a sigevent info, we'll create one ourself, using a stack local variable. Particularly will we use the timer ID as sival_int. But as sigev_value is a union containing a pointer and an int, that assignment will only partially initialize sigev_value on systems where the size of a pointer is bigger than the size of an int. On such systems we'll copy the uninitialized stack bytes from the timer_create() call to userland when the timer actually fires and we're going to deliver the signal. Initialize sigev_value with 0 to plug the stack info leak. Found in the PaX patch, written by the PaX Team. Fixes: 5a9fa730 ("posix-timers: kill ->it_sigev_signo and...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.comSigned-off-by:
-
Hans de Goede authored
commit 993b3a3f upstream. These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jack Pham authored
commit 1200a82a upstream. On ISOC endpoints the last trb_pool entry used as a LINK TRB is not getting zeroed out correctly due to memset being called incorrectly and in the wrong place. If pool allocated from DMA was not zero-initialized to begin with this will result in the size and ctrl values being random garbage. Call memset correctly after assignment of the trb_link pointer. Fixes: f6bafc6a ("usb: dwc3: convert TRBs into bitshifts") Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 1ffde699 upstream. This reverts commit aa11bbf3. This commit was causing connection issues and is not needed if IWL_MVM_RS_RSSI_BASED_INIT_RATE is set to false by default. Regardless of the issues mentioned above, this patch added the following WARNING: WARNING: CPU: 0 PID: 3946 at drivers/net/wireless/iwlwifi/mvm/tx.c:190 iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm]() Got an HT rate for a non data frame 0x8 CPU: 0 PID: 3946 Comm: wpa_supplicant Tainted: G O 3.17.0+ #6 Hardware name: LENOVO 20ANCTO1WW/20ANCTO1WW, BIOS GLET71WW (2.25 ) 07/02/2014 0000000000000009 ffffffff814fa911 ffff8804288db8f8 ffffffff81064f52 0000000000001808 ffff8804288db948 ffff88040add8660 ffff8804291b5600 0000000000000000 ffffffff81064fb7 ffffffffa07b73d0 0000000000000020 Call Trace: [<ffffffff814fa911>] ? dump_stack+0x41/0x51 [<ffffffff81064f52>] ? warn_slowpath_common+0x72/0x90 [<ffffffff81064fb7>] ? warn_slowpath_fmt+0x47/0x50 [<ffffffffa07a39ea>] ? iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm] [<ffffffffa07a3cf8>] ? iwl_mvm_tx_skb+0x48/0x3c0 [iwlmvm] [<ffffffffa079cb9b>] ? iwl_mvm_mac_tx+0x7b/0x180 [iwlmvm] [<ffffffffa0746ce9>] ? __ieee80211_tx+0x2b9/0x3c0 [mac80211] [<ffffffffa07492f3>] ? ieee80211_tx+0xb3/0x100 [mac80211] [<ffffffffa0749c49>] ? ieee80211_subif_start_xmit+0x459/0xca0 [mac80211] [<ffffffff814116e7>] ? dev_hard_start_xmit+0x337/0x5f0 [<ffffffff81430d46>] ? sch_direct_xmit+0x96/0x1f0 [<ffffffff81411ba3>] ? __dev_queue_xmit+0x203/0x4f0 [<ffffffff8142f670>] ? ether_setup+0x70/0x70 [<ffffffff814e96a1>] ? packet_sendmsg+0xf81/0x1110 [<ffffffff8140625c>] ? skb_free_datagram+0xc/0x40 [<ffffffff813f7538>] ? sock_sendmsg+0x88/0xc0 [<ffffffff813f7274>] ? move_addr_to_kernel.part.20+0x14/0x60 [<ffffffff811c47c2>] ? __inode_wait_for_writeback+0x62/0xb0 [<ffffffff813f7a91>] ? SYSC_sendto+0xf1/0x180 [<ffffffff813f88f9>] ? __sys_recvmsg+0x39/0x70 [<ffffffff8150066d>] ? system_call_fastpath+0x1a/0x1f ---[ end trace cc19a150d311fc63 ]--- which was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=85691Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit a0855054 upstream. When mac80211 wants to ensure that a frame is sent, it calls the flush() callback. Until now, iwldvm implemented this by waiting that all the frames are sent (ACKed or timeout). In case of weak signal, this can take a significant amount of time, delaying the next connection (in case of roaming). Many users have reported that the flush would take too long leading to the following error messages to be printed: iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 2 iwlwifi 0000:03:00.0: Current SW read_ptr 161 write_ptr 201 iwl data: 00000000: 00 00 00 00 00 00 00 00 fe ff 01 00 00 00 00 00 [snip] iwlwifi 0000:03:00.0: FH TRBs(0) = 0x00000000 [snip] iwlwifi 0000:03:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [9,9] [snip] Instead of waiting for these packets, simply drop them. This significantly improves the responsiveness of the network. Note that all the queues are flushed, but the VO one. This is not typically used by the applications and it likely contains management frames that are useful for connection or roaming. This bug is tracked here: https://bugzilla.kernel.org/show_bug.cgi?id=56581 But it is duplicated in distributions' trackers. A simple search in Ubuntu's database led to these bugs: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1270808 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1305406 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1356236 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1360597 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1361809 Depends-on: 77be2c54 ("mac80211: add vif to flush call") Signed-off-by:
-
Emmanuel Grumbach authored
commit 9180ac50 upstream. The LTR is the handshake between the device and the root complex about the latency allowed when the bus exits power save. This configuration was missing and this led to high latency in the link power up. The end user could experience high latency in the network because of this. Signed-off-by:
-
J. Bruce Fields authored
commit 51904b08 upstream. Unknown operation numbers are caught in nfsd4_decode_compound() which sets op->opnum to OP_ILLEGAL and op->status to nfserr_op_illegal. The error causes the main loop in nfsd4_proc_compound() to skip most processing. But nfsd4_proc_compound also peeks ahead at the next operation in one case and doesn't take similar precautions there. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Felipe Balbi authored
commit bfa6b18c upstream. Currently, there's no guarantee that udc->driver will be valid when using soft_connect sysfs interface. In fact, we can very easily trigger a NULL pointer dereference by trying to disconnect when a gadget driver isn't loaded. Fix this bug: ~# echo disconnect > soft_connect [ 33.685743] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 33.694221] pgd = ed0cc000 [ 33.697174] [00000014] *pgd=ae351831, *pte=00000000, *ppte=00000000 [ 33.703766] Internal error: Oops: 17 [#1] SMP ARM [ 33.708697] Modules linked in: xhci_plat_hcd xhci_hcd snd_soc_davinci_mcasp snd_soc_tlv320aic3x snd_soc_edma snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd lis3lv02d_i2c matrix_keypad lis3lv02d dwc3_omap input_polldev soundcore [ 33.734372] CPU: 0 PID: 1457 Comm: bash Not tainted 3.17.0-09740-ga93416e-dirty #345 [ 33.742457] task: ee71ce00 ti: ee68a000 task.ti: ee68a000 [ 33.748116] PC is at usb_udc_softconn_store+0xa4/0xec [ 33.753416] LR is at mark_held_locks+0x78/0x90 [ 33.758057] pc : [<c04df128>] lr : [<c00896a4>] psr: 20000013 [ 33.758057] sp : ee68bec8 ip : c0c00008 fp : ee68bee4 [ 33.770050] r10: ee6b394c r9 : ee68bf80 r8 : ee6062c0 [ 33.775508] r7 : 00000000 r6 : ee6062c0 r5 : 0000000b r4 : ee739408 [ 33.782346] r3 : 00000000 r2 : 00000000 r1 : ee71d390 r0 : ee664170 [ 33.789168] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 33.796636] Control: 10c5387d Table: ad0cc059 DAC: 00000015 [ 33.802638] Process bash (pid: 1457, stack limit = 0xee68a248) [ 33.808740] Stack: (0xee68bec8 to 0xee68c000) [ 33.813299] bec0: 0000000b c0411284 ee6062c0 00000000 ee68bef4 ee68bee8 [ 33.821862] bee0: c04112ac c04df090 ee68bf14 ee68bef8 c01c2868 c0411290 0000000b ee6b3940 [ 33.830419] bf00: 00000000 00000000 ee68bf4c ee68bf18 c01c1a24 c01c2818 00000000 00000000 [ 33.838990] bf20: ee61b940 ee2f47c0 0000000b 000ce408 ee68bf80 c000f304 ee68a000 00000000 [ 33.847544] bf40: ee68bf7c ee68bf50 c0152dd8 c01c1960 ee68bf7c c0170af8 ee68bf7c ee2f47c0 [ 33.856099] bf60: ee2f47c0 000ce408 0000000b c000f304 ee68bfa4 ee68bf80 c0153330 c0152d34 [ 33.864653] bf80: 00000000 00000000 0000000b 000ce408 b6e7fb50 00000004 00000000 ee68bfa8 [ 33.873204] bfa0: c000f080 c01532e8 0000000b 000ce408 00000001 000ce408 0000000b 00000000 [ 33.881763] bfc0: 0000000b 000ce408 b6e7fb50 00000004 0000000b 00000000 000c5758 00000000 [ 33.890319] bfe0: 00000000 bec2c924 b6de422d b6e1d226 40000030 00000001 75716d2f 00657565 [ 33.898890] [<c04df128>] (usb_udc_softconn_store) from [<c04112ac>] (dev_attr_store+0x28/0x34) [ 33.907920] [<c04112ac>] (dev_attr_store) from [<c01c2868>] (sysfs_kf_write+0x5c/0x60) [ 33.916200] [<c01c2868>] (sysfs_kf_write) from [<c01c1a24>] (kernfs_fop_write+0xd0/0x194) [ 33.924773] [<c01c1a24>] (kernfs_fop_write) from [<c0152dd8>] (vfs_write+0xb0/0x1bc) [ 33.932874] [<c0152dd8>] (vfs_write) from [<c0153330>] (SyS_write+0x54/0xb0) [ 33.940247] [<c0153330>] (SyS_write) from [<c000f080>] (ret_fast_syscall+0x0/0x48) [ 33.948160] Code: e1a01007 e12fff33 e5140004 e5143008 (e5933014) [ 33.954625] ---[ end trace f849bead94eab7ea ]--- Fixes: 2ccea03a (usb: gadget: introduce UDC Class) Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 53185b3a upstream. Commit 468bcc2a ("usb: musb: dsps: kill OTG timer on suspend") stopped the timer in suspend path but forgot the re-enable it in the resume path. This patch fixes the behaviour. Fixes 468bcc2a "usb: musb: dsps: kill OTG timer on suspend" Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
David Cohen authored
commit c0d31b3c upstream. The commit '2e4c7553 usb: gadget: f_fs: add aio support' broke the quirk implemented to align buffer size to maxpacketsize on out endpoint. As result, functionfs does not work on Intel platforms using dwc3 driver (i.e. Bay Trail and Merrifield). This patch fixes the issue. This code is based on a previous Qiuxu's patch. Fixes: 2e4c7553 (usb: gadget: f_fs: add aio support) Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Robert Baldyga authored
commit a3058a5d upstream. During FunctionFS bind, ffs_data_get() function was called twice (in functionfs_bind() and in ffs_do_functionfs_bind()), while on unbind ffs_data_put() was called once (in functionfs_unbind() function). In result refcount never reached value 0, and ffs memory resources has been never released. Since ffs_data_get() call in ffs_do_functionfs_bind() is redundant and not neccessary, we remove it to have equal number of gets ans puts, and free allocated memory after refcount reach 0. Fixes: 5920cda6 (usb: gadget: FunctionFS: convert to new function interface with backward compatibility) Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
-
Roger Quadros authored
commit b01ff5cb upstream. This reverts commit 02dae36a. That commit is bogus in two ways: 1) There's no way dwc3-omap's ->suspend() can cause any effect on xhci's ->suspend(). Linux device driver model guarantees that a parent's ->suspend() will only be called after all children are suspended. dwc3-omap is the parent of the parent of xhci. 2) When implementing Deep Sleep states where context is lost, USBOTGSS_IRQ0 register, well, looses context so we _must_ rewrite it otherwise core IRQs will never be reenabled and USB will appear to be dead. Fixes: 02dae36a (usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/complete) Cc: George Cherian <george.cherian@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Thomas Gleixner authored
commit d2e6d62c upstream. commit c58d80f5 ("usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq") fixed hrtimer scheduling bug. There is one left which does not trigger that often. The following scenario is still possible: lock(&x->lock); hrtimer_start(&x->t); unlock(&x->lock); expires: t->function(); lock(&x->lock); lock(&x->lock); if (!hrtimer_queued(&x->t)) hrtimer_start(&x->t); unlock(&x->lock); if (!list_empty(x->early_tx_list)) ret = HRTIMER_RESTART; -> hrtimer_forward_now(...) } else ret = HRTIMER_NORESTART; unlock(&x->lock); and the timer callback returns HRTIMER_RESTART for an armed timer. This is wrong and we run into the BUG_ON() in __run_hrtimer(). This can happens on SMP or PREEMPT-RT. The patch fixes the problem by only starting the timer if the timer is not yet queued. Reported-by:
Torben Hohn <torbenh@linutronix.de> Signed-off-by:
-
Perry Hung authored
commit 7f2719f0 upstream. An official recent Windows driver from FTDI detects counterfeit devices and reprograms the internal EEPROM containing the USB PID to 0, effectively bricking the device. Add support for this VID/PID pair to correctly bind the driver on these devices. See: http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/Signed-off-by:
Perry Hung <iperry@gmail.com> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jan Kara authored
commit 84ce0f0e upstream. When sg_scsi_ioctl() fails to prepare request to submit in blk_rq_map_kern() we jump to a label where we just end up copying (luckily zeroed-out) kernel buffer to userspace instead of reporting error. Fix the problem by jumping to the right label. CC: Jens Axboe <axboe@kernel.dk> CC: linux-scsi@vger.kernel.org Coverity-id: 1226871 Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Jason Baron authored
commit 8030122a upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/e6dd616f2cd51583a7e77af6f639b86313c74144.1413405053.git.jbaron@akamai.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jason Baron authored
commit fa19ac4b upstream. Fix UE event being reported as HW_EVENT_ERR_CORRECTED. Signed-off-by:
-
Jason Baron authored
commit ab0543de upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
-
Jason Baron authored
commit 8a3f075d upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
-
Andy Lutomirski authored
commit b47dcbdc upstream. If the TSC is unusable or disabled, then this patch fixes: - Confusion while trying to clear old APIC interrupts. - Division by zero and incorrect programming of the TSC deadline timer. This fixes boot if the CPU has a TSC deadline timer but a missing or broken TSC. The failure to boot can be observed with qemu using -cpu qemu64,-tsc,+tsc-deadline This also happens to me in nested KVM for unknown reasons. With this patch, I can boot cleanly (although without a TSC). Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Bandan Das <bsd@redhat.com> Link: http://lkml.kernel.org/r/e2fa274e498c33988efac0ba8b7e3120f7f92d78.1413393027.git.luto@amacapital.netSigned-off-by:
-
