- 08 Apr, 2017 32 commits
-
-
Bart Van Assche authored
commit 7cb689fe upstream. Callers of scsi_dh_activate(), e.g. dm-mpath, assume that this function either returns an error code or calls the completion function. Make alua_activate() call the completion function even if scsi_device_get() fails. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit 625fe857 upstream. Do not queue ALUA work nor call scsi_device_put() if the scsi_device_get() call fails. This patch fixes the following crash: general protection fault: 0000 [#1] SMP RIP: 0010:scsi_device_put+0xb/0x30 Call Trace: scsi_disk_put+0x2d/0x40 sd_release+0x3d/0xb0 __blkdev_put+0x29e/0x360 blkdev_put+0x49/0x170 dm_put_table_device+0x58/0xc0 [dm_mod] dm_put_device+0x70/0xc0 [dm_mod] free_priority_group+0x92/0xc0 [dm_multipath] free_multipath+0x70/0xc0 [dm_multipath] multipath_dtr+0x19/0x20 [dm_multipath] dm_table_destroy+0x67/0x120 [dm_mod] dev_suspend+0xde/0x240 [dm_mod] ctl_ioctl+0x1f5/0x520 [dm_mod] dm_ctl_ioctl+0xe/0x20 [dm_mod] do_vfs_ioctl+0x8f/0x700 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x18/0xad Fixes: commit 03197b61 ("scsi_dh_alua: Use workqueue for RTPG") Signed-off-by:
-
John Garry authored
commit 9702c67c upstream. The total ata xfer length may not be calculated properly, in that we do not use the proper method to get an sg element dma length. According to the code comment, sg_dma_len() should be used after dma_map_sg() is called. This issue was found by turning on the SMMUv3 in front of the hisi_sas controller in hip07. Multiple sg elements were being combined into a single element, but the original first element length was being use as the total xfer length. Fixes: ff2aeb1e ("libata: convert to chained sg") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
peter chang authored
commit bf33f87d upstream. The user can control the size of the next command passed along, but the value passed to the ioctl isn't checked against the usable max command size. Signed-off-by:
Peter Chang <dpf@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Christoph Hellwig authored
commit 2fcc319d upstream. When a reflink operation causes the bmap code to allocate a btree block we're currently doing single-AG allocations due to having ->firstblock set and then try any higher AG due a little reflink quirk we've put in when adding the reflink code. But given that we do not have a minleft reservation of any kind in this AG we can still not have any space in the same or higher AG even if the file system has enough free space. To fix this use a XFS_ALLOCTYPE_FIRST_AG allocation in this fall back path instead. [And yes, we need to redo this properly instead of piling hacks over hacks. I'm working on that, but it's not going to be a small series. In the meantime this fixes the customer reported issue] Also add a warning for failing allocations to make it easier to debug. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
commit f65e6fad upstream. Commit fa7f138a ("xfs: clear delalloc and cache on buffered write failure") fixed one regression in the iomap error handling code and exposed another. The fundamental problem is that if a buffered write is a rewrite of preexisting delalloc blocks and the write fails, the failure handling code can punch out preexisting blocks with valid file data. This was reproduced directly by sub-block writes in the LTP kernel/syscalls/write/write03 test. A first 100 byte write allocates a single block in a file. A subsequent 100 byte write fails and punches out the block, including the data successfully written by the previous write. To address this problem, update the ->iomap_begin() handler to distinguish newly allocated delalloc blocks from preexisting delalloc blocks via the IOMAP_F_NEW flag. Use this flag in the ->iomap_end() handler to decide when a failed or short write should punch out delalloc blocks. This introduces the subtle requirement that ->iomap_begin() should never combine newly allocated delalloc blocks with existing blocks in the resulting iomap descriptor. This can occur when a new delalloc reservation merges with a neighboring extent that is part of the current write, for example. Therefore, drop the post-allocation extent lookup from xfs_bmapi_reserve_delalloc() and just return the record inserted into the fork. This ensures only new blocks are returned and thus that preexisting delalloc blocks are always handled as "found" blocks and not punched out on a failed rewrite. Reported-by:
Xiong Zhou <xzhou@redhat.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Chandan Rajendra authored
commit d5825712 upstream. When block size is larger than inode cluster size, the call to XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs would have set xfs_sb->sb_inoalignmt to 0. Hence in xfs_set_inoalignment(), xfs_mount->m_inoalign_mask gets initialized to -1 instead of 0. However, xfs_mount->m_sinoalign would get correctly intialized to 0 because for every positive value of xfs_mount->m_dalign, the condition "!(mp->m_dalign & mp->m_inoalign_mask)" would evaluate to false. Also, xfs_imap() worked fine even with xfs_mount->m_inoalign_mask having -1 as the value because blks_per_cluster variable would have the value 1 and hence we would never have a need to use xfs_mount->m_inoalign_mask to compute the inode chunk's agbno and offset within the chunk. Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by:
-
Christoph Hellwig authored
commit 787eb485 upstream. There are two different cases of buffered I/O errors: - first we can have an already shutdown fs. In that case we should skip any on-disk operations and just clean up the appen transaction if present and destroy the ioend - a real I/O error. In that case we should cleanup any lingering COW blocks. This gets skipped in the current code and is fixed by this patch. Signed-off-by:
-
Christoph Hellwig authored
commit 3802a345 upstream. We only want to reclaim preallocations from our periodic work item. Currently this is archived by looking for a dirty inode, but that check is rather fragile. Instead add a flag to xfs_reflink_cancel_cow_* so that the caller can ask for just cancelling unwritten extents in the COW fork. Signed-off-by:
-
Christoph Hellwig authored
commit 410d17f6 upstream. In various places we currently assert that xfs_bmap_btalloc allocates from the same as the firstblock value passed in, unless it's either NULLAGNO or the dop_low flag is set. But the reflink code does not fully follow this convention as it passes in firstblock purely as a hint for the allocator without actually having previous allocations in the transaction, and without having a minleft check on the current AG, leading to the assert firing on a very full and heavily used file system. As even the reflink code only allocates from equal or higher AGs for now we can simply the check to always allow for equal or higher AGs. Note that we need to eventually split the two meanings of the firstblock value. At that point we can also allow the reflink code to allocate from any AG instead of limiting it in any way. Signed-off-by:
-
Chandan Rajendra authored
commit 8ee9fdbe upstream. On a ppc64 system, executing generic/256 test with 32k block size gives the following call trace, XFS: Assertion failed: args->maxlen > 0, file: /root/repos/linux/fs/xfs/libxfs/xfs_alloc.c, line: 2026 kernel BUG at /root/repos/linux/fs/xfs/xfs_message.c:113! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries Modules linked in: CPU: 2 PID: 19361 Comm: mkdir Not tainted 4.10.0-rc5 #58 task: c000000102606d80 task.stack: c0000001026b8000 NIP: c0000000004ef798 LR: c0000000004ef798 CTR: c00000000082b290 REGS: c0000001026bb090 TRAP: 0700 Not tainted (4.10.0-rc5) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28004428 XER: 00000000 CFAR: c0000000004ef180 SOFTE: 1 GPR00: c0000000004ef798 c0000001026bb310 c000000001157300 ffffffffffffffea GPR04: 000000000000000a c0000001026bb130 0000000000000000 ffffffffffffffc0 GPR08: 00000000000000d1 0000000000000021 00000000ffffffd1 c000000000dd4990 GPR12: 0000000022004444 c00000000fe00800 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000043a606fc 0000000043a76c08 0000000043a1b3d0 GPR20: 000001002a35cd60 c0000001026bbb80 0000000000000000 0000000000000001 GPR24: 0000000000000240 0000000000000004 c00000062dc55000 0000000000000000 GPR28: 0000000000000004 c00000062ecd9200 0000000000000000 c0000001026bb6c0 NIP [c0000000004ef798] .assfail+0x28/0x30 LR [c0000000004ef798] .assfail+0x28/0x30 Call Trace: [c0000001026bb310] [c0000000004ef798] .assfail+0x28/0x30 (unreliable) [c0000001026bb380] [c000000000455d74] .xfs_alloc_space_available+0x194/0x1b0 [c0000001026bb410] [c00000000045b914] .xfs_alloc_fix_freelist+0x144/0x480 [c0000001026bb580] [c00000000045c368] .xfs_alloc_vextent+0x698/0xa90 [c0000001026bb650] [c0000000004a6200] .xfs_ialloc_ag_alloc+0x170/0x820 [c0000001026bb7c0] [c0000000004a9098] .xfs_dialloc+0x158/0x320 [c0000001026bb8a0] [c0000000004e628c] .xfs_ialloc+0x7c/0x610 [c0000001026bb990] [c0000000004e8138] .xfs_dir_ialloc+0xa8/0x2f0 [c0000001026bbaa0] [c0000000004e8814] .xfs_create+0x494/0x790 [c0000001026bbbf0] [c0000000004e5ebc] .xfs_generic_create+0x2bc/0x410 [c0000001026bbce0] [c0000000002b4a34] .vfs_mkdir+0x154/0x230 [c0000001026bbd70] [c0000000002bc444] .SyS_mkdirat+0x94/0x120 [c0000001026bbe30] [c00000000000b760] system_call+0x38/0xfc Instruction dump: 4e800020 60000000 7c0802a6 7c862378 3c82ffca 7ca72b78 38841c18 7c651b78 38600000 f8010010 f821ff91 4bfff94d <0fe00000> 60000000 7c0802a6 7c892378 When block size is larger than inode cluster size, the call to XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs would have set xfs_sb->sb_inoalignmt to 0. This causes xfs_ialloc_cluster_alignment() to return 0. Due to this args.minalignslop (in xfs_ialloc_ag_alloc()) gets the unsigned equivalent of -1 assigned to it. This later causes alloc_len in xfs_alloc_space_available() to have a value of 0. In such a scenario when args.total is also 0, the assert statement "ASSERT(args->maxlen > 0);" fails. This commit fixes the bug by replacing the call to XFS_B_TO_FSBT() in xfs_ialloc_cluster_alignment() with a call to xfs_icluster_size_fsb(). Suggested-by:
-
Brian Foster authored
commit 48af96ab upstream. The block reservation for the transaction allocated in xfs_shift_file_space() is an artifact of the original collapse range support. It exists to handle the case where a collapse range occurs, the initial extent is left shifted into a location that forms a contiguous boundary with the previous extent and thus the extents are merged. This code was subsequently refactored and reused for insert range (right shift) support. If an insert range occurs under low free space conditions, the extent at the starting offset is split before the first shift transaction is allocated. If the block reservation fails, this leaves separate, but contiguous extents around in the inode. While not a fatal problem, this is unexpected and will flag a warning on subsequent insert range operations on the inode. This problem has been reproduce intermittently by generic/270 running against a ramdisk device. Since right shift does not create new extent boundaries in the inode, a block reservation for extent merge is unnecessary. Update xfs_shift_file_space() to conditionally reserve fs blocks for left shift transactions only. This avoids the warning reproduced by generic/270. Reported-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Darrick J. Wong authored
commit 93aaead5 upstream. Fix an uninitialize variable. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Brian Foster authored
commit 75d65361 upstream. Certain workoads that punch holes into speculative preallocation can cause delalloc indirect reservation splits when the delalloc extent is split in two. If further splits occur, an already short-handed extent can be split into two in a manner that leaves zero indirect blocks for one of the two new extents. This occurs because the shortage is large enough that the xfs_bmap_split_indlen() algorithm completely drains the requested indlen of one of the extents before it honors the existing reservation. This ultimately results in a warning from xfs_bmap_del_extent(). This has been observed during file copies of large, sparse files using 'cp --sparse=always.' To avoid this problem, update xfs_bmap_split_indlen() to explicitly apply the reservation shortage fairly between both extents. This smooths out the overall indlen shortage and defers the situation where we end up with a delalloc extent with zero indlen reservation to extreme circumstances. Reported-by:
Patrick Dung <mpatdung@gmail.com> Signed-off-by:
-
Brian Foster authored
commit 0e339ef8 upstream. When a delalloc extent is created, it can be merged with pre-existing, contiguous, delalloc extents. When this occurs, xfs_bmap_add_extent_hole_delay() merges the extents along with the associated indirect block reservations. The expectation here is that the combined worst case indlen reservation is always less than or equal to the indlen reservation for the individual extents. This is not always the case, however, as existing extents can less than the expected indlen reservation if the extent was previously split due to a hole punch. If a new extent merges with such an extent, the total indlen requirement may be larger than the sum of the indlen reservations held by both extents. xfs_bmap_add_extent_hole_delay() assumes that the worst case indlen reservation is always available and assigns it to the merged extent without consideration for the indlen held by the pre-existing extent. As a result, the subsequent xfs_mod_fdblocks() call can attempt an unintentional allocation rather than a free (indicated by an ASSERT() failure). Further, if the allocation happens to fail in this context, the failure goes unhandled and creates a filesystem wide block accounting inconsistency. Fix xfs_bmap_add_extent_hole_delay() to function as designed. Cap the indlen reservation assigned to the merged extent to the sum of the indlen reservations held by each of the individual extents. Signed-off-by:
-
Christoph Hellwig authored
commit 5e30c23d upstream. We don't just need the structure to track busy extents which can be avoided with a synchronous transaction, but also to keep track of pending discard. Signed-off-by:
-
Bill O'Donnell authored
commit b20fe473 upstream. If pag cannot be allocated, the current error exit path will trip a null pointer deference error when calling xfs_buf_hash_destroy with a null pag. Fix this by adding a new error exit labels and jumping to those accordingly, avoiding the hash destroy and unnecessary kmem_free on pag. Up to three things need to be properly unwound: 1) pag memory allocation 2) xfs_buf_hash_init 3) radix_tree_insert For any given iteration through the loop, any of the above which succeed must be unwound for /this/ pag, and then all prior initialized pags must be unwound. Addresses-Coverity-Id: 1397628 ("Dereference after null check") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
commit c5ecb423 upstream. We're changing both metadata and data, so we need to update the timestamps for clone operations. Dedupe on the other hand does not change file data, and only changes invisible metadata so the timestamps should not be updated. This follows existing btrfs behavior. Signed-off-by:
-
Christoph Hellwig authored
commit 54a4ef8a upstream. We currently fall back from direct to buffered writes if we detect a remaining shared extent in the iomap_begin callback. But by the time iomap_begin is called for the potentially unaligned end block we might have already written most of the data to disk, which we'd now write again using buffered I/O. To avoid this reject all writes to reflinked files before starting I/O so that we are guaranteed to only write the data once. The alternative would be to unshare the unaligned start and/or end block before doing the I/O. I think that's doable, and will actually be required to support reflinks on DAX file system. But it will take a little more time and I'd rather get rid of the double write ASAP. Signed-off-by:
-
Hou Tao authored
commit 4dd2eb63 upstream. After successful IO or permanent error, b_first_retry_time also needs to be cleared, else the invalid first retry time will be used by the next retry check. Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
-
Darrick J. Wong authored
commit 5eda4300 upstream. Christoph Hellwig pointed out that there's a potentially nasty race when performing simultaneous nearby directio cow writes: "Thread 1 writes a range from B to c " B --------- C p "a little later thread 2 writes from A to B " A --------- B p [editor's note: the 'p' denote cowextsize boundaries, which I added to make this more clear] "but the code preallocates beyond B into the range where thread "1 has just written, but ->end_io hasn't been called yet. "But once ->end_io is called thread 2 has already allocated "up to the extent size hint into the write range of thread 1, "so the end_io handler will splice the unintialized blocks from "that preallocation back into the file right after B." We can avoid this race by ensuring that thread 1 cannot accidentally remap the blocks that thread 2 allocated (as part of speculative preallocation) as part of t2's write preparation in t1's end_io handler. The way we make this happen is by taking advantage of the unwritten extent flag as an intermediate step. Recall that when we begin the process of writing data to shared blocks, we create a delayed allocation extent in the CoW fork: D: --RRRRRRSSSRRRRRRRR--- C: ------DDDDDDD--------- When a thread prepares to CoW some dirty data out to disk, it will now convert the delalloc reservation into an /unwritten/ allocated extent in the cow fork. The da conversion code tries to opportunistically allocate as much of a (speculatively prealloc'd) extent as possible, so we may end up allocating a larger extent than we're actually writing out: D: --RRRRRRSSSRRRRRRRR--- U: ------UUUUUUU--------- Next, we convert only the part of the extent that we're actively planning to write to normal (i.e. not unwritten) status: D: --RRRRRRSSSRRRRRRRR--- U: ------UURRUUU--------- If the write succeeds, the end_cow function will now scan the relevant range of the CoW fork for real extents and remap only the real extents into the data fork: D: --RRRRRRRRSRRRRRRRR--- U: ------UU--UUU--------- This ensures that we never obliterate valid data fork extents with unwritten blocks from the CoW fork. Signed-off-by:
-
Darrick J. Wong authored
commit 05a630d7 upstream. In the data fork, we only allow extents to perform the following state transitions: delay -> real <-> unwritten There's no way to move directly from a delalloc reservation to an /unwritten/ allocated extent. However, for the CoW fork we want to be able to do the following to each extent: delalloc -> unwritten -> written -> remapped to data fork This will help us to avoid a race in the speculative CoW preallocation code between a first thread that is allocating a CoW extent and a second thread that is remapping part of a file after a write. In order to do this, however, we need two things: first, we have to be able to transition from da to unwritten, and second the function that converts between real and unwritten has to be made aware of the cow fork. Do both of those things. Signed-off-by:
-
Darrick J. Wong authored
commit de14c5f5 upstream. Perform basic sanity checking of the directory free block header fields so that we avoid hanging the system on invalid data. (Granted that just means that now we shutdown on directory write, but that seems better than hanging...) Signed-off-by:
-
Darrick J. Wong authored
commit b3bf607d upstream. We can't handle a bmbt that's taller than BTREE_MAXLEVELS, and there's no such thing as a zero-level bmbt (for that we have extents format), so if we see this, send back an error code. Signed-off-by:
-
Darrick J. Wong authored
commit d5a91bae upstream. Don't let anybody load an obviously bad btree pointer. Since the values come from disk, we must return an error, not just ASSERT. Signed-off-by:
-
Darrick J. Wong authored
commit 7a652bbe upstream. When we open a directory, we try to readahead block 0 of the directory on the assumption that we're going to need it soon. If the bmbt is corrupt, the directory will never be usable and the readahead fails immediately, so we might as well prevent the directory from being opened at all. This prevents a subsequent read or modify operation from hitting it and taking the fs offline. NOTE: We're only checking for early failures in the block mapping, not the readahead directory block itself. Signed-off-by:
-
Darrick J. Wong authored
commit 4b5bd5bf upstream. We use di_format and if_flags to decide whether we're grabbing the ilock in btree mode (btree extents not loaded) or shared mode (anything else), but the state of those fields can be changed by other threads that are also trying to load the btree extents -- IFEXTENTS gets set before the _bmap_read_extents call and cleared if it fails. We don't actually need to have IFEXTENTS set until after the bmbt records are successfully loaded and validated, which will fix the race between multiple threads trying to read the same directory. The next patch strengthens directory bmbt validation by refusing to open the directory if reading the bmbt to start directory readahead fails. Signed-off-by:
-
Brian Foster authored
commit e4229d6b upstream. It's possible for post-eof blocks to end up being used for direct I/O writes. dio write performs an upfront unwritten extent allocation, sends the dio and then updates the inode size (if necessary) on write completion. If a file release occurs while a file extending dio write is in flight, it is possible to mistake the post-eof blocks for speculative preallocation and incorrectly truncate them from the inode. This means that the resulting dio write completion can discover a hole and allocate new blocks rather than perform unwritten extent conversion. This requires a strange mix of I/O and is thus not likely to reproduce in real world workloads. It is intermittently reproduced by generic/299. The error manifests as an assert failure due to transaction overrun because the aforementioned write completion transaction has only reserved enough blocks for btree operations: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, \ file: fs/xfs//xfs_trans.c, line: 309 The root cause is that xfs_free_eofblocks() uses i_size to truncate post-eof blocks from the inode, but async, file extending direct writes do not update i_size until write completion, long after inode locks are dropped. Therefore, xfs_free_eofblocks() effectively truncates the inode to the incorrect size. Update xfs_free_eofblocks() to serialize against dio similar to how extending writes are serialized against i_size updates before post-eof block zeroing. Specifically, wait on dio while under the iolock. This ensures that dio write completions have updated i_size before post-eof blocks are processed. Signed-off-by:
-
Brian Foster authored
commit c3155097 upstream. The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by:
-
Brian Foster authored
commit a36b9261 upstream. xfs_free_eofblocks() requires the IOLOCK_EXCL lock, but is called from different contexts where the lock may or may not be held. The need_iolock parameter exists for this reason, to indicate whether xfs_free_eofblocks() must acquire the iolock itself before it can proceed. This is ugly and confusing. Simplify the semantics of xfs_free_eofblocks() to require the caller to acquire the iolock appropriately and kill the need_iolock parameter. While here, the mp param can be removed as well as the xfs_mount is accessible from the xfs_inode structure. This patch does not change behavior. Signed-off-by:
-
Ladi Prosek authored
commit 7ad658b6 upstream. The nested_ept_enabled flag introduced in commit 7ca29de2 was not computed correctly. We are interested only in L1's EPT state, not the the combined L0+L1 value. In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must be false to make sure that PDPSTRs are loaded based on CR3 as usual, because the special case described in 26.3.2.4 Loading Page-Directory- Pointer-Table Entries does not apply. Fixes: 7ca29de2 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT") Cc: qemu-stable@nongnu.org Reported-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 633ee407 upstream. sock_alloc_inode() allocates socket+inode and socket_wq with GFP_KERNEL, which is not allowed on the writeback path: Workqueue: ceph-msgr con_work [libceph] ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000 0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00 ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148 Call Trace: [<ffffffff816dd629>] schedule+0x29/0x70 [<ffffffff816e066d>] schedule_timeout+0x1bd/0x200 [<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120 [<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70 [<ffffffff816deb5f>] wait_for_completion+0xbf/0x180 [<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390 [<ffffffff81086335>] flush_work+0x165/0x250 [<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0 [<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs] [<ffffffff816d6b42>] ? __slab_free+0xee/0x234 [<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs] [<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30 [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs] [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs] [<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40 [<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs] [<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs] [<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs] [<ffffffff811c0c18>] super_cache_scan+0x178/0x180 [<ffffffff8115912e>] shrink_slab_node+0x14e/0x340 [<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450 [<ffffffff8115af70>] shrink_slab+0x100/0x140 [<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490 [<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0 [<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be [<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40 [<ffffffff8119743e>] alloc_pages_current+0x9e/0x110 [<ffffffff811a0ac5>] new_slab+0x2c5/0x390 [<ffffffff816d71c4>] __slab_alloc+0x33b/0x459 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0 [<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0 [<ffffffff811d8566>] alloc_inode+0x26/0xa0 [<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70 [<ffffffff815b933e>] sock_alloc+0x1e/0x80 [<ffffffff815ba855>] __sock_create+0x95/0x220 [<ffffffff815baa04>] sock_create_kern+0x24/0x30 [<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph] [<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd] [<ffffffff81084c19>] process_one_work+0x159/0x4f0 [<ffffffff8108561b>] worker_thread+0x11b/0x530 [<ffffffff81085500>] ? create_worker+0x1d0/0x1d0 [<ffffffff8108b6f9>] kthread+0xc9/0xe0 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 [<ffffffff816e1b98>] ret_from_fork+0x58/0x90 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here. Link: http://tracker.ceph.com/issues/19309Reported-by:
Sergey Jerusalimov <wintchester@gmail.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
- 31 Mar, 2017 8 commits
-
-
Greg Kroah-Hartman authored
-
Bin Liu authored
commit bc1e2154 upstream. The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c0 ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 619bd4a7 upstream. Since the change in commit: fd7a4bed ("sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks") ... we don't reschedule a task under certain circumstances: Lets say task-A, SCHED_OTHER, is running on CPU0 (and it may run only on CPU0) and holds a PI lock. This task is removed from the CPU because it used up its time slice and another SCHED_OTHER task is running. Task-B on CPU1 runs at RT priority and asks for the lock owned by task-A. This results in a priority boost for task-A. Task-B goes to sleep until the lock has been made available. Task-A is already runnable (but not active), so it receives no wake up. The reality now is that task-A gets on the CPU once the scheduler decides to remove the current task despite the fact that a high priority task is enqueued and waiting. This may take a long time. The desired behaviour is that CPU0 immediately reschedules after the priority boost which made task-A the task with the lowest priority. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Joe Carnuccio authored
commit c4a9b538 upstream. Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Dave Martin authored
commit 7195ee31 upstream. It's not clear what behaviour is sensible when doing partial write of NT_METAG_RPIPE, so just don't bother. This patch assumes that userspace will never rely on a partial SETREGSET in this case, since it's not clear what should happen anyway. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Martin authored
commit 5fe81fe9 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill TXSTATUS, a well-defined default value is used, based on the task's current value. Suggested-by:
-
Dave Martin authored
commit a78ce80d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit d3805c54 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
