- 08 May, 2017 16 commits
-
-
Xin Long authored
[ Upstream commit 34b2789f ] Now sctp doesn't check sock's state before listening on it. It could even cause changing a sock with any state to become a listening sock when doing sctp_listen. This patch is to fix it by checking sock's state in sctp_listen, so that it will listen on the sock with right state. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
[ Upstream commit bcc5364b ] When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit 8f8d28e4 ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e91793bb ] The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Nathan Sullivan authored
[ Upstream commit 49d52e81 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 48481c8f ] Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Tom Hromatka authored
[ Upstream commit 9ae34dbd ] This commit moves sparc64's prototype of pmd_write() outside of the CONFIG_TRANSPARENT_HUGEPAGE ifdef. In 2013, commit a7b9403f ("sparc64: Encode huge PMDs using PTE encoding.") exposed a path where pmd_write() could be called without CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below. The diff is awkward to read, but the changes are straightforward. pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE. Also, __HAVE_ARCH_PMD_WRITE was defined. kernel BUG at include/asm-generic/pgtable.h:576! \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1] CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted 4.1.12-61.7.1.el6uek.rc1.sparc64 #1 task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000 TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y: 00000005 Not tainted TPC: <gup_huge_pmd+0x198/0x1e0> g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001 g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720 o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00 o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0 RPC: <gup_huge_pmd+0x190/0x1e0> l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000 l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000 i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000 i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0 I7: <gup_pud_range+0x170/0x1a0> Call Trace: [0000000000460dd0] gup_pud_range+0x170/0x1a0 [0000000000460e84] get_user_pages_fast+0x84/0x120 [00000000006f5a18] iov_iter_get_pages+0x98/0x240 [00000000005fa744] do_direct_IO+0xf64/0x1e00 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4] [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4] [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4] [0000000000553bd4] generic_file_read_iter+0x114/0x140 [00000000005bdc2c] __vfs_read+0xac/0x100 [00000000005bf254] vfs_read+0x54/0x100 [00000000005bf368] SyS_pread64+0x68/0x80 Signed-off-by:
Tom Hromatka <tom.hromatka@oracle.com> Signed-off-by:
-
bob picco authored
[ Upstream commit adfae8a5 ] I encountered this bug when using /proc/kcore to examine the kernel. Plus a coworker inquired about debugging tools. We computed pa but did not use it during the maximum physical address bits test. Instead we used the identity mapped virtual address which will always fail this test. I believe the defect came in here: [bpicco@zareason linus.git]$ git describe --contains bb4e6e85 v3.18-rc1~87^2~4 . Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
commit c06b6d70 upstream. On slow platforms with unreliable TSC, such as QEMU emulated machines, it is possible for the kernel to request the next event in the past. In that case, in the current implementation of xen_vcpuop_clockevent, we simply return -ETIME. To be precise the Xen returns -ETIME and we pass it on. However the result of this is a missed event, which simply causes the kernel to hang. Instead it is better to always ask the hypervisor for a timer event, even if the timeout is in the past. That way there are no lost interrupts and the kernel survives. To do that, remove the VCPU_SSHOTTMR_future flag. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Acked-by:
Juergen Gross <jgross@suse.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Felipe F. Tonello authored
commit 03d27ade upstream. buflen by default (256) is smaller than wMaxPacketSize (512) in high-speed devices. That caused the OUT endpoint to freeze if the host send any data packet of length greater than 256 bytes. This is an example dump of what happended on that enpoint: HOST: [DATA][Length=260][...] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] ... HOST: [PING] DEVICE: [NAK] This patch fixes this problem by setting the minimum usb_request's buffer size for the OUT endpoint as its wMaxPacketSize. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
santosh.shilimkar@oracle.com authored
commit e47db94e upstream. Two different threads with different rds sockets may be in rds_recv_rcvbuf_delta() via receive path. If their ports both map to the same word in the congestion map, then using non-atomic ops to update it could cause the map to be incorrect. Lets use atomics to avoid such an issue. Full credit to Wengang <wen.gang.wang@oracle.com> for finding the issue, analysing it and also pointing out to offending code with spin lock based fix. Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Corey Minyard authored
commit c80e1b62 upstream. As part of handling a crash on an SMP system, an IPI is send to all other CPUs to save their current registers and stop. It was using task_pt_regs(current) to get the registers, but that will only be accurate if the CPU was interrupted running in userland. Instead allow the architecture to pass in the registers (all pass NULL now, but allow for the future) and then use get_irq_regs() which should be accurate as we are in an interrupt. Fall back to task_pt_regs(current) if nothing else is available. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13050/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Wei Fang authored
commit 816b0acf upstream. If first_bad == this_sector when we get the WriteMostly disk in read_balance(), valid disk will be returned with zero max_sectors. It'll lead to a dead loop in make_request(), and OOM will happen because of endless allocation of struct bio. Since we can't get data from this disk in this case, so continue for another disk. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Signed-off-by:
Shaohua Li <shli@fb.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Theodore Ts'o authored
commit 9e92f48c upstream. We aren't checking to see if the in-inode extended attribute is corrupted before we try to expand the inode's extra isize fields. This can lead to potential crashes caused by the BUG_ON() check in ext4_xattr_shift_entries(). Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Dan Carpenter authored
commit 210bd104 upstream. We have to unlock before returning -ENOMEM. Fixes: 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Chao Yu authored
commit 9a59b62f upstream. Do more sanity check for superblock during ->mount. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
- 30 Apr, 2017 24 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 43a66845 upstream. We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
Daniel Jiang <danieljiang0415@gmail.com> Reported-by:
Solar Designer <solar@openwall.com> Reported-by:
-
EunTaik Lee authored
commit 9590232b upstream. There is a use-after-free problem in the ion driver. This is caused by a race condition in the ion_ioctl() function. A handle has ref count of 1 and two tasks on different cpus calls ION_IOC_FREE simultaneously. cpu 0 cpu 1 ------------------------------------------------------- ion_handle_get_by_id() (ref == 2) ion_handle_get_by_id() (ref == 3) ion_free() (ref == 2) ion_handle_put() (ref == 1) ion_free() (ref == 0 so ion_handle_destroy() is called and the handle is freed.) ion_handle_put() is called and it decreases the slub's next free pointer The problem is detected as an unaligned access in the spin lock functions since it uses load exclusive instruction. In some cases it corrupts the slub's free pointer which causes a mis-aligned access to the next free pointer.(kmalloc returns a pointer like ffffc0745b4580aa). And it causes lots of other hard-to-debug problems. This symptom is caused since the first member in the ion_handle structure is the reference count and the ion driver decrements the reference after it has been freed. To fix this problem client->lock mutex is extended to protect all the codes that uses the handle. Signed-off-by:
Eun Taik Lee <eun.taik.lee@samsung.com> Reviewed-by:
Laura Abbott <labbott@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Vlad Tsyrklevich authored
commit 05692d70 upstream. The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize user-supplied integers, potentially allowing memory corruption. This patch adds appropriate integer overflow checks, checks the range bounds for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set. VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in vfio_pci_set_irqs_ioctl(). Furthermore, a kzalloc is changed to a kcalloc because the use of a kzalloc with an integer multiplication allowed an integer overflow condition to be reached without this patch. kcalloc checks for overflow and should prevent a similar occurrence. Signed-off-by:
Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 8dfbcc43 upstream. If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64 [11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150 [11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40 [11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550 [11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0 [11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0 [11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0 [11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30 [11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10 [11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0 [11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0 [11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0 [11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0 [11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360 [11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300 [11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400 [11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300 [11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20 [11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70 [11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000 [11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40 [11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0 [11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad [11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0 [11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50 [11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50 [11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0 [11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130 [11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Signed-off-by:
-
Stefan Agner authored
commit 970d96f9 upstream. In Thumb2 mode, the stack register r13 is deprecated if the destination register is the program counter (r15). Similar to head.S, head-nommu.S uses r13 to store the return address used after configuring the CPU's CP15 register. However, since we do not enable a MMU, there will be no address switch and it is possible to use branch with link instruction to call __after_proc_init. Avoid using r13 completely by using bl to call __after_proc_init and get rid of __secondary_switched. Beside removing unnecessary complexity, this also fixes a compiler warning when compiling a !MMU kernel: Warning: Use of r13 as a source register is deprecated when r15 is the destination register. Tested-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 236dec05 upstream. Using "make tinyconfig" produces a couple of annoying warnings that show up for build test machines all the time: .config:966:warning: override: NOHIGHMEM changes choice state .config:965:warning: override: SLOB changes choice state .config:963:warning: override: KERNEL_XZ changes choice state .config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:933:warning: override: SLOB changes choice state .config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:870:warning: override: SLOB changes choice state .config:868:warning: override: KERNEL_XZ changes choice state .config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state I've made a previous attempt at fixing them and we discussed a number of alternatives. I tried changing the Makefile to use "merge_config.sh -n $(fragment-list)" but couldn't get that to work properly. This is yet another approach, based on the observation that we do want to see a warning for conflicting 'choice' options, and that we can simply make them non-conflicting by listing all other options as disabled. This is a trivial patch that we can apply independent of plans for other changes. Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log https://patchwork.kernel.org/patch/9212749/Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Hannes Reinecke authored
commit 36dd5acd upstream. If no user settings are found it's pointless trying to read them from flash. So skip that step. This also fixes a compilation warning about uninitialized variables in aic94xx. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 20e783e3 upstream. The aurora cache controller is the only remaining user of a couple of functions in this file and are completely unused when that is disabled, leading to build warnings: arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] With the knowledge that the code is now aurora-specific, we can simplify it noticeably: - The pl310 errata workarounds are not needed on aurora and can be removed - As confirmed by Thomas Petazzoni from the data sheet, the cache_wait() macro is never needed. - No need to hold the lock across atomic cache sync - We can load the l2x0_base into a local variable across operations There should be no functional change in this patch, but readability and the generated object code improves, along with avoiding the warnings. (on Armada 370 RD and Armada XP GP, boot tested, plus a little bit of DMA traffic by reading data from a SD card) Acked-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by:
-
Satoru Takeuchi authored
commit 6e1103a6 upstream. Suppress the following warning displayed on building 32bit (i686) kernel. =============================================================================== ... CC [M] fs/btrfs/extent_io.o fs/btrfs/extent_io.c: In function ‘btrfs_free_io_failure_record’: fs/btrfs/extent_io.c:2193:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] failrec = (struct io_failure_record *)state->private; ... =============================================================================== Signed-off-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Reported-by:
Chris Murphy <chris@colorremedies.com> Signed-off-by:
Chris Mason <clm@fb.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 67893f12 upstream. We get a bogus warning about a potential uninitialized variable use in gfs2, because the compiler does not figure out that we never use the leaf number if get_leaf_nr() returns an error: fs/gfs2/dir.c: In function 'get_first_leaf': fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/gfs2/dir.c: In function 'dir_split_leaf': fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized] Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is sufficient to let gcc understand that this is exactly the same condition as in IS_ERR() so it can optimize the code path enough to understand it. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit d34712d2 upstream. The sunxi mmc driver tries to calculate a dma address by using pointer arithmetic, which causes a warning when dma_addr_t is wider than a pointer: drivers/mmc/host/sunxi-mmc.c: In function 'sunxi_mmc_init_idma_des': drivers/mmc/host/sunxi-mmc.c:296:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; ^ To avoid this warning and to simplify the logic, this changes the code to avoid the cast and calculate the correct address manually. The behavior should be unchanged. Signed-off-by:
David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit de927188 upstream. The tulip driver causes annoying build-time warnings for allmodconfig builds for all recent architectures: dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! This is the last remaining warning for arm64, and I'd like to get rid of it. We don't really know the cache line size, architecturally it would be at least 16 bytes, but all implementations I found have 64 or 128 bytes. Configuring tulip for 32-byte lines as we do on ARM32 seems to be the safe but slow default, and nobody who cares about performance these days would use a tulip chip anyway, so we can just use that. To save the next person the job of trying to find out what this is for and picking a default for their architecture just to kill off the warning, I'm now removing the preprocessor #warning and turning it into a pr_warn or dev_warn that prints the equivalent information when the driver gets loaded. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Sergey Ryazanov authored
commit c4a30537 upstream. Caller (generic PCI code) already do proper locking so no need to add another one here. Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7601/Signed-off-by:
-
Arnd Bergmann authored
commit 48dc5fb3 upstream. The driver reads a value from hfa384x_from_bap(), which may fail, and then assigns the value to a local variable. gcc detects that in in the failure case, the 'rlen' variable now contains uninitialized data: In file included from ../drivers/net/wireless/intersil/hostap/hostap_pci.c:220:0: drivers/net/wireless/intersil/hostap/hostap_hw.c: In function 'hfa384x_get_rid': drivers/net/wireless/intersil/hostap/hostap_hw.c:842:5: warning: 'rec' may be used uninitialized in this function [-Wmaybe-uninitialized] if (le16_to_cpu(rec.len) == 0) { This restructures the function as suggested by Russell King, to make it more readable and get more reliable error handling, by handling each failure mode using a goto. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Richard Leitner authored
commit 769105aa upstream. The loop for measuring the square wave periods over some cycles is refactored to be more easily readable. This includes avoiding a "by-hand-implemented" for loop with a "real" one and adding some comments. Furthermore the following compiler warning is avoided by this patch: drivers/misc/ioc4.c: In function ‘ioc4_probe’: drivers/misc/ioc4.c:194:16: warning: ‘start’ may be used uninitialized in this function [-Wmaybe-uninitialized] period = (end - start) / ^ drivers/misc/ioc4.c:148:11: note: ‘start’ was declared here uint64_t start, end, period; ^ Signed-off-by:
Richard Leitner <dev@g0hl1n.net> Acked-by:
-
Arnd Bergmann authored
commit 57e7c8ce upstream. When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by:
-
Arnd Bergmann authored
commit a4f642a8 upstream. The nozomi wireless data driver has its own helper function to transfer data from a FIFO, doing an extra byte swap on big-endian architectures, presumably to bring the data back into byte-serial order after readw() or readl() perform their implicit byteswap. This helper function is used in the receive_data() function to first read the length into a 32-bit variable, which causes a compile-time warning: drivers/tty/nozomi.c: In function 'receive_data': drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] The problem is that gcc is unsure whether the data was actually read or not. We know that it is at this point, so we can replace it with a single readl() to shut up that warning. I am leaving the byteswap in there, to preserve the existing behavior, even though this seems fishy: Reading the length of the data into a cpu-endian variable should normally not use a second byteswap on big-endian systems, unless the hardware is aware of the CPU endianess. There appears to be a lot more confusion about endianess in this driver, so it probably has not worked on big-endian systems in a long time, if ever, and I have no way to test it. It's well possible that this driver has not been used by anyone in a while, the last patch that looks like it was tested on the hardware is from 2008. Signed-off-by:
-
Arnd Bergmann authored
commit 22f44150 upstream. gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac driver: drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process': drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] This is a false positive, and marking the brcmf_fws_hanger_poppkt function as 'static inline' makes the warning go away. I have checked the object file output and while a little code gets moved around, the size of the binary remains identical. Signed-off-by:
-
Kevin Cernekee authored
commit 97c7134a upstream. Commit 2ae83bf9 ("[CIFS] Fix setting time before epoch (negative time values)") changed "u64 t" to "s64 t", which makes do_div() complain about a pointer signedness mismatch: CC fs/cifs/netmisc.o In file included from ./arch/mips/include/asm/div64.h:12:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/wait.h:6, from include/linux/net.h:23, from fs/cifs/netmisc.c:25: fs/cifs/netmisc.c: In function ‘cifs_NTtimeToUnix’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ fs/cifs/netmisc.c:941:22: note: in expansion of macro ‘do_div’ ts.tv_nsec = (long)do_div(t, 10000000) * 100; Introduce a temporary "u64 abs_t" variable to fix this. Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Signed-off-by:
Steve French <steve.french@primarydata.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 6ac75368 upstream. gcc-5.0 warns about a potential uninitialized variable use in nfsd: fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2': fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized] reset_union_bmap_deny(old_deny_bmap, stp); ^ fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here unsigned char old_deny_bmap; ^ This is a false positive, the code path that is warned about cannot actually be reached. This adds an initialization for the variable to make the warning go away. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Markos Chandras authored
commit be513698 upstream. There are certain places where the code uses .set mips32 or .set mips64 or .set arch=r4000. In preparation of MIPS R6 support, and in order to use as less #ifdefs as possible, we define new macros to set similar annotations for MIPS R6. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Burton authored
commit 2f5281ba upstream. cpmac_start_xmit() used the max() macro on skb->len (an unsigned int) and ETH_ZLEN (a signed int literal). This led to the following compiler warning: In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/net/ethernet/ti/cpmac.c:19: drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max' len = max(skb->len, ETH_ZLEN); ^ On top of this, it assigned the result of the max() macro to a signed integer whilst all further uses of it result in it being cast to varying widths of unsigned integer. Fix this up by using max_t to ensure the comparison is performed as unsigned integers, and for consistency change the type of the len variable to unsigned int. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
