- 04 Jul, 2022 8 commits
-
-
Stephen Boyd authored
We don't need to stash the encoder here. Instead we can simply pass it around as an argument. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491187/ Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.orgSigned-off-by:
-
Dmitry Baryshkov authored
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather than generic MODE_BAD in case the mode clock is higher than DP_MAX_PIXEL_CLK_KHZ (675 MHz). Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com> Reviewed-by:
-
Kuogee Hsieh authored
Use quic id instead of codeaurora id in maintainers list for display devicetree bindings. Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Douglas Anderson authored
We're supposed to list the supplies in the dt bindings but there are none in the DP controller bindings. Looking at the Linux driver and existing device trees, we can see that two supplies are expected: - vdda-0p9-supply - vdda-1p2-supply Let's list them both in the bindings. Note that the datasheet for sc7280 doesn't describe these supplies very verbosely. For the 0p9 supply, for instance, it says "Power for eDP 0.9 V circuits". This this is obvious from the property name, we don't bother cluttering the bindings with a description. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/483373/ Link: https://lore.kernel.org/r/20220425140619.1.Ibfde5a26a7182c4b478d570c23d2649823ac2cce@changeidSigned-off-by:
-
Dmitry Baryshkov authored
In order to simplify DP code, drop hand-coded loops over clock arrays, replacing them with clk_bulk_* functions. Signed-off-by:
-
Dmitry Baryshkov authored
Inline the dp_power_clk_set_rate() function, replacing it with the call to msm_dss_enable_clk(). Signed-off-by:
-
Dmitry Baryshkov authored
The only clock for which we set the rate is the "stream_pixel". Rather than storing the rate and then setting it by looping over all the clocks, set the clock rate directly. Signed-off-by:
-
Dmitry Baryshkov authored
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting the rate for it would be a call to dev_pm_opp_set_rate(). Instead of saving the rate inside struct dss_module_power, call the devm_pm_opp_set_rate() directly. Signed-off-by:
-
- 28 Jun, 2022 1 commit
-
-
Rob Clark authored
Merge v5.19 fixes to avoid merge conflicts Signed-off-by:Rob Clark <robdclark@chromium.org>
-
- 27 Jun, 2022 1 commit
-
-
Rob Clark authored
This was a typo, we didn't actually want to return zero. Fixes: a61acbbe ("drm/msm: Track "seqno" fences by idr") Signed-off-by:
-
- 23 Jun, 2022 3 commits
-
-
sunliming authored
Fixes the following smatch warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:261 dpu_encoder_phys_wb_atomic_check() warn: variable dereferenced before check 'conn_state' Fixes: d7d0e73f ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by:
sunliming <sunliming@kylinos.cn> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Kuogee Hsieh authored
During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. Under this kind of circumstance, drm_device may not be populated completed which causes system crash at drm_dev_dbg(). This patch reset drm_dev to NULL so that following drm_dev_dbg() will not refer to any internal fields of drm_device to prevent system from crashing. Below are panic stack trace, [ 53.584904] Unable to handle kernel paging request at virtual address 0000000070018001 . [ 53.702212] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) [ 53.710445] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 53.717596] pc : string_nocheck+0x1c/0x64 [ 53.721738] lr : string+0x54/0x60 [ 53.725162] sp : ffffffc013d6b650 [ 53.728590] pmr_save: 000000e0 [ 53.731743] x29: ffffffc013d6b650 x28: 0000000000000002 x27: 0000000000ffffff [ 53.739083] x26: ffffffc013d6b710 x25: ffffffd07a066ae0 x24: ffffffd07a419f97 [ 53.746420] x23: ffffffd07a419f99 x22: ffffff81fef360d4 x21: ffffff81fef364d4 [ 53.753760] x20: ffffffc013d6b6f8 x19: ffffffd07a06683c x18: 0000000000000000 [ 53.761093] x17: 4020386678302f30 x16: 00000000000000b0 x15: ffffffd0797523c8 [ 53.768429] x14: 0000000000000004 x13: ffff0000ffffff00 x12: ffffffd07a066b2c [ 53.775780] x11: 0000000000000000 x10: 000000000000013c x9 : 0000000000000000 [ 53.783117] x8 : ffffff81fef364d4 x7 : 0000000000000000 x6 : 0000000000000000 [ 53.790445] x5 : 0000000000000000 x4 : ffff0a00ffffff04 x3 : ffff0a00ffffff04 [ 53.797783] x2 : 0000000070018001 x1 : ffffffffffffffff x0 : ffffff81fef360d4 [ 53.805136] Call trace: [ 53.807667] string_nocheck+0x1c/0x64 [ 53.811439] string+0x54/0x60 [ 53.814498] vsnprintf+0x374/0x53c [ 53.818009] pointer+0x3dc/0x40c [ 53.821340] vsnprintf+0x398/0x53c [ 53.824854] vscnprintf+0x3c/0x88 [ 53.828274] __trace_array_vprintk+0xcc/0x2d4 [ 53.832768] trace_array_printk+0x8c/0xb4 [ 53.836900] drm_trace_printf+0x74/0x9c [ 53.840875] drm_dev_dbg+0xfc/0x1b8 [ 53.844480] dp_pm_suspend+0x70/0xf8 [ 53.848164] dpm_run_callback+0x60/0x1a0 [ 53.852222] __device_suspend+0x304/0x3f4 [ 53.856363] dpm_suspend+0xf8/0x3a8 [ 53.859959] dpm_suspend_start+0x8c/0xc0 Fixes: 570d3e5d ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by:
-
Stephen Boyd authored
The 'vsync_cnt' is used to count the number of frames for a crtc. Unfortunately, we increment the count after waking up userspace via dpu_crtc_vblank_callback() calling drm_crtc_handle_vblank(). drm_crtc_handle_vblank() wakes up userspace processes that have called drm_wait_vblank_ioctl(), and if that ioctl is expecting the count to increase it won't. Increment the count before calling into the drm APIs so that we don't have to worry about ordering the increment with anything else in drm. This fixes a software video decode test that fails to see frame counts increase on Trogdor boards. Cc: Mark Yacoub <markyacoub@chromium.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Fixes: 885455d6 ("drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.") Signed-off-by:
-
- 18 Jun, 2022 6 commits
-
-
Kuogee Hsieh authored
Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2e ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by:
-
Abhinav Kumar authored
As explained in [1], using max_linewidth to limit the modes does not seem to remove 4K modes on chipsets such as sm8250 where the max_linewidth actually supports 4k. This would have been alright if dual SSPP support was present but otherwise fails the per SSPP bandwidth check. The ideal way to implement this would be to filter out the modes which will exceed the bandwidth check by computing it. But this would be an exhaustive solution till we have dual SSPP support. Let's instead use max_mixer_width to limit the modes. max_mixer_width still remains 2560 on sm8250 so even if the max_linewidth is 4096, the only way 4k modes could have been supported is to have source split enabled on the SSPP. Since source split support is not enabled yet in DPU driver, enforce max_mixer_width as the upper limit on the modes. [1] https://patchwork.freedesktop.org/patch/489662/ Fixes: e67dcecd ("drm/msm/dpu: limit writeback modes according to max_linewidth") Signed-off-by:
-
Kuogee Hsieh authored
During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. In this case, core_initialized flag had to be check to make sure clocks is on before update DP controller register to disable HPD interrupts. Otherwise system will crash due to below NOC fatal error. QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007 QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007 QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024 QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042 QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002 QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001 QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006 QTISECLIB [01f23dfd3]NOC error fatal changes in v2: -- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch Fixes: 570d3e5d ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by:
-
Miaoqian Lin authored
of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 86418f90 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
-
Rob Clark authored
Prior to the last commit, this could result in setting the GPU written fence value back to an older value, if we had missed updating completed_fence prior to suspend. This was mostly harmless as the GPU would eventually overwrite it again with the correct value. But we should just not do this. Instead just leave a sanity check that the fence looks plausible (in case the GPU scribbled on memory). Reported-by:
Steev Klimaszewski <steev@kali.org> Fixes: 95d1deb0 ("drm/msm/gem: Add fenced vma unpin") Signed-off-by:
-
Rob Clark authored
I noticed while looking at some traces, that we could miss calls to msm_update_fence(), as the irq could have raced with retire_submits() which could have already popped the last submit on a ring out of the queue of in-flight submits. But walking the list of submits in the irq handler isn't really needed, as dma_fence_is_signaled() will dtrt. So lets just drop it entirely. v2: use spin_lock_irqsave/restore as we are no longer protected by the spin_lock_irqsave/restore() in update_fences() Reported-by:
-
- 15 Jun, 2022 2 commits
-
-
Rob Clark authored
Keep the warn, but drop the early return. If we do manage to hit this sort of issue, skipping the cleanup just makes things worse (dangling drm_mm_nodes when the msm_gem_vma is freed, etc). Whereas the worst that happens if we tear down a mapping the GPU is accessing is that we get GPU iova faults, but otherwise the world keeps spinning. Signed-off-by:
-
Rob Clark authored
Previously the BO_PINNED state in the submit was tracking two related but different things: (1) that the buffer object was pinned, and (2) that the vma (mapping within a set of pagetables) was pinned. But with fenced vma unpin (needed so that userspace couldn't race with retire path for releasing a vma) these two were decoupled. The fact that the BO_PINNED flag was already cleared meant that we leaked the bo pin count which should have been dropped when the submit was retired. So split this state into BO_OBJ_PINNED and BO_VMA_PINNED, so they can be dropped independently. Fixes: 95d1deb0 ("drm/msm/gem: Add fenced vma unpin") Signed-off-by:
-
- 14 Jun, 2022 1 commit
-
-
Jonathan Marek authored
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents with 1, so msm_iommu_pagetable_map maps only the first physical segment. To fix this problem use for_each_sgtable_sg(), which uses orig_nents. Fixes: b145c6e6 ("drm/msm: Add support to create a local pagetable") Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.caSigned-off-by:
-
- 13 Jun, 2022 1 commit
-
-
Rob Clark authored
In msm_devfreq_suspend() we cancel idle_work synchronously so that it doesn't run after we power of the hw or in the resume path. But this means that we want to ensure that idle_work is not scheduled *after* we no longer hold a runpm ref. So switch the ordering of pm_runtime_put() vs msm_devfreq_idle(). v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy() Fixes: 9bc95570 ("drm/msm: Devfreq tuning") Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by:
-
- 12 Jun, 2022 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - Fix hp-wmi regression on HP Omen laptops introduced in 5.18 - Several hardware-id additions - A couple of other tiny fixes" * tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: hid: Add Surface Go to VGBS allow list platform/x86: hp-wmi: Use zero insize parameter only when supported platform/x86: hp-wmi: Resolve WMI query failures on some devices platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support platform/x86: barco-p50-gpio: Add check for platform_driver_register platform/x86/intel: pmc: Support Intel Raptorlake P platform/x86/intel: Fix pmt_crashlog array reference platform/mellanox: Add static in struct declaration. platform/mellanox: Spelling s/platfom/platform/
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "Tetsuo's patch to trigger build warnings if system-wide wq's are flushed along with a TP type update and trivial comment update" * tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Switch to new kerneldoc syntax for named variable macro argument workqueue: Fix type of cpu in trace event workqueue: Wrap flush_workqueue() using a macro
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Make the *.mod build rule portable for POSIX awk - Fix regression of 'make nsdeps' - Make scripts/check-local-export working for older bash versions - Fix scripts/gdb to extract the .config data from vmlinux * tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/gdb: change kernel config dumping method scripts/check-local-export: avoid 'wait $!' for process substitution scripts/nsdeps: adjust to the format change of *.mod files kbuild: avoid regex RS for POSIX awk
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Three reconnect fixes, all for stable as well. One of these three reconnect fixes does address a problem with multichannel reconnect, but this does not include the additional fix (still being tested) for dynamically detecting multichannel adapter changes which will improve those reconnect scenarios even more" * tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: populate empty hostnames for extra channels cifs: return errors during session setup during reconnects cifs: fix reconnect on smb3 mount types
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull random number generator fixes from Jason Donenfeld: - A fix for a 5.19 regression for a case in which early device tree initializes the RNG, which flips a static branch. On most plaforms, jump labels aren't initialized until much later, so this caused splats. On a few mailing list threads, we cooked up easy fixes for arm64, arm32, and risc-v. But then things looked slightly more involved for xtensa, powerpc, arc, and mips. And at that point, when we're patching 7 architectures in a place before the console is even available, it seems like the cost/risk just wasn't worth it. So random.c works around it now by checking the already exported `static_key_initialized` boolean, as though somebody already ran into this issue in the past. I'm not super jazzed about that; it'd be prettier to not have to complicate downstream code. But I suppose it's practical. - A few small code nits and adding a missing __init annotation. - A change to the default config values to use the cpu and bootloader's seeds for initializing the RNG earlier. This brings them into line with what all the distros do (Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at least), and moreover will now give us test coverage in various test beds that might have caught the above device tree bug earlier. - A change to WireGuard CI's configuration to increase test coverage around the RNG. - A documentation comment fix to unrelated maintainerless CRC code that I was asked to take, I guess because it has to do with polynomials (which the RNG thankfully no longer uses). * tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: wireguard: selftests: use maximum cpu features and allow rng seeding random: remove rng_has_arch_random() random: credit cpu and bootloader seeds by default random: do not use jump labels before they are initialized random: account for arch randomness in bits random: mark bootloader randomness code as __init random: avoid checking crng_ready() twice in random_init() crc-itu-t: fix typo in CRC ITU-T polynomial comment
-
Duke Lee authored
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be added to dmi_vgbs_allow_list to enable tablet mode when an attached Type Cover is folded back. BugLink: https://github.com/linux-surface/linux-surface/issues/837Signed-off-by:
Duke Lee <krnhotwings@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Bedant Patnaik authored
commit be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") and commit 12b19f14 ("platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug): Attempt to CreateField of length zero (20211217/dsopcode-133) because of the ACPI method HWMC, which unconditionally creates a Field of size (insize*8) bits: CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) In cases where args->insize = 0, the Field size is 0, resulting in an error. Fix this by using zero insize only if 0x5 error code is returned Tested on Omen 15 AMD (2020) board ID: 8786. Fixes: be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by:
Bedant Patnaik <bedant.patnaik@gmail.com> Tested-by:
Jorge Lopez <jorge.lopez2@hp.com> Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.comReviewed-by:
-
Jorge Lopez authored
WMI queries fail on some devices where the ACPI method HWMC unconditionally attempts to create Fields beyond the buffer if the buffer is too small, this breaks essential features such as power profiles: CreateByteField (Arg1, 0x10, D008) CreateByteField (Arg1, 0x11, D009) CreateByteField (Arg1, 0x12, D010) CreateDWordField (Arg1, 0x10, D032) CreateField (Arg1, 0x80, 0x0400, D128) In cases where args->data had zero length, ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit offset/length 128/8 exceeds size of target Buffer (128 bits) (20211217/dsopcode-198) was obtained. ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit offset/length 136/8 exceeds size of target Buffer (136bits) (20211217/dsopcode-198) The original code created a buffer size of 128 bytes regardless if the WMI call required a smaller buffer or not. This particular behavior occurs in older BIOS and reproduced in OMEN laptops. Newer BIOS handles buffer sizes properly and meets the latest specification requirements. This is the reason why testing with a dynamically allocated buffer did not uncover any failures with the test systems at hand. This patch was tested on several OMEN, Elite, and Zbooks. It was confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN Laptop 15-ek0xxx. No problems were reported when testing on several Elite and Zbooks notebooks. Fixes: 4b4967cb ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by: -
Jonathan Neuschäfer authored
The syntax without dots is available since commit 43756e34 ("scripts/kernel-doc: Add support for named variable macro arguments"). The same HTML output is produced with and without this patch. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 11 Jun, 2022 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: "A set of fixes. Most address the new warning we emit at build time when irq chips are not immutable with some additional tweaks to gpio-crystalcove from Andy and a small tweak to gpio-dwapd. - make irq_chip structs immutable in several Diolan and intel drivers to get rid of the new warning we emit when fiddling with irq chips - don't print error messages on probe deferral in gpio-dwapb" * tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: dwapb: Don't print error on -EPROBE_DEFER gpio: dln2: make irq_chip immutable gpio: sch: make irq_chip immutable gpio: merrifield: make irq_chip immutable gpio: wcove: make irq_chip immutable gpio: crystalcove: Join function declarations and long lines gpio: crystalcove: Use specific type and API for IRQ number gpio: crystalcove: make irq_chip immutable -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Driver fixes and and one core patch. Nine of the driver patches are minor fixes and reworks to lpfc and the rest are trivial and minor fixes elsewhere" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pmcraid: Fix missing resource cleanup in error case scsi: ipr: Fix missing/incorrect resource cleanup in error case scsi: mpt3sas: Fix out-of-bounds compiler warning scsi: lpfc: Update lpfc version to 14.2.0.4 scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted scsi: lpfc: Address NULL pointer dereference after starget_to_rport() scsi: lpfc: Resolve some cleanup issues following SLI path refactoring scsi: lpfc: Resolve some cleanup issues following abort path refactoring scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event() scsi: vmw_pvscsi: Expand vcpuHint to 16 bits scsi: sd: Fix interpretation of VPD B9h length
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably fixes for latent bugs in drivers that got exposed by suppressing interrupts before DRIVER_OK, which in turn has been done by 8b4ec69d ("virtio: harden vring IRQ")" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: um: virt-pci: set device ready in probe() vdpa: make get_vq_group and set_group_asid optional virtio: Fix all occurences of the "the the" typo vduse: Fix NULL pointer dereference on sysfs access vringh: Fix loop descriptors check in the indirect cases vdpa/mlx5: clean up indenting in handle_ctrl_vlan() vdpa/mlx5: fix error code for deleting vlan virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed vdpa/mlx5: Fix syntax errors in comments virtio-rng: make device ready before making request
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen. "Fix build errors and a stale comment" * tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Remove MIPS comment about cycle counter LoongArch: Fix copy_thread() build errors LoongArch: Fix the !CONFIG_SMP build
-
Linus Torvalds authored
Commit 6c776766 ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()") introduced a problem on some 32-bit architectures (at least arm, xtensa, csky,sparc and mips), that have a 'size_t' that is 'unsigned int'. The reason is that we now do min(nr * PAGE_SIZE - offset, maxsize); where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is 'unsigned long'. As a result, the normal C type rules means that the first argument to 'min()' ends up being 'unsigned long'. In contrast, 'maxsize' is of type 'size_t'. Now, 'size_t' and 'unsigned long' are always the same physical type in the kernel, so you'd think this doesn't matter, and from an actual arithmetic standpoint it doesn't. But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if it could also be 'unsigned long'. In that situation, both are unsigned 32-bit types, but they are not the *same* type. And as a result 'min()' will complain about the distinct types (ignore the "pointer types" part of the error message: that's an artifact of the way we have made 'min()' check types for being the same): lib/iov_iter.c: In function 'iter_xarray_get_pages': include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror] 20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^~ lib/iov_iter.c:1464:16: note: in expansion of macro 'min' 1464 | return min(nr * PAGE_SIZE - offset, maxsize); | ^~~ This was not visible on 64-bit architectures (where we always define 'size_t' to be 'unsigned long'). Force these cases to use 'min_t(size_t, x, y)' to make the type explicit and avoid the issue. [ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned long' arithmetically. We've certainly historically seen environments with 16-bit address spaces and 32-bit 'unsigned long'. Similarly, even in 64-bit modern environments, 'size_t' could be its own type distinct from 'unsigned long', even if it were arithmetically identical. So the above type commentary is only really descriptive of the kernel environment, not some kind of universal truth for the kinds of wild and crazy situations that are allowed by the C standard ] Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/ Cc: Jeff Layton <jlayton@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jason A. Donenfeld authored
By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by:Jason A. Donenfeld <Jason@zx2c4.com>
-
Kuan-Ying Lee authored
MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out from the kernel_config_data variable. Thus, we parse kernel_config_data directly instead of considering offset of MAGIC_START and MAGIC_END. Fixes: 13610aa9 ("kernel/configs: use .incbin directive to embed config_data.gz") Signed-off-by:Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
