It has been observed that sometimes a higher order memory allocation
for BPF maps fails when there is no obvious memory pressure in a system.
E.g. the map (BPF_MAP_TYPE_LRU_HASH, key=38, value=56, max_elems=524288)
could not be created due to vmalloc unable to allocate 75497472B,
when the system's memory consumption (in MB) was the following:

    Total: 3942 Used: 837 (21.24%) Free: 138 Buffers: 239 Cached: 2727

Later analysis [1] by Michal Hocko showed that the vmalloc was not trying
to reclaim memory from the page cache and was failing prematurely due to
__GFP_NORETRY.

Considering dcda9b04 ("mm, tree wide: replace __GFP_REPEAT by
__GFP_RETRY_MAYFAIL with more useful semantic") and [1], we can replace
__GFP_NORETRY with __GFP_RETRY_MAYFAIL, as it won't invoke OOM killer
and will try harder to fulfil allocation requests.

Unfortunately, replacing the body of the BPF map memory allocation
function with the kvmalloc_node helper function is not an option at
this point in time, given 1) kmalloc is non-optional for higher order
allocations, and 2) passing __GFP_RETRY_MAYFAIL to the kmalloc would
stress the slab allocator too much for large requests.

The change has been tested with the workloads mentioned above and by
observing oom_kill value from /proc/vmstat.

[1]: https://lore.kernel.org/bpf/20190310071318.GW5232@dhcp22.suse.cz/Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190318153940.GL8924@dhcp22.suse.cz/

We move the check that prevents connecting service ranges to after
the RDM/DGRAM check, and move address sanity control to a separate
function that also validates the service range.

Fixes: 23998835 ("tipc: improve address sanity check in tipc_connect()")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix documentation markup warnings in snmp_counter.rst:

Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent.

Fixes: 80cc4950 ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: 8e2ea53a ("add snmp counters document")
Fixes: a6c7c7aa ("net: add document for several snmp counters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>

nla_nest_start may fail. The fix check its status and returns
-EMSGSIZE in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

In my latest patch I missed one rcu_read_unlock(), in case
device is down.

Fixes: 4477138f ("tun: properly test for IFF_UP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start could fail and requires a check. The fix returns
-EMSGSIZE if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start may fail and thus deserves a check.

The fix returns -EMSGSIZE in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start may fail and thus deserves a check.
The fix returns -EMSGSIZE when it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

upcall is dereferenced even when genlmsg_put fails. The fix
goto out to avoid the NULL pointer dereference in this case.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yauheni Kaliuta pointed out that PTR_TO_STACK store/load verifier test
was failing on powerpc64 BE, and rightfully indicated that the PPC_LD()
macro is not masking away the last two bits of the offset per the ISA,
resulting in the generation of 'lwa' instruction instead of the intended
'ld' instruction.

Segher also pointed out that we can't simply mask away the last two bits
as that will result in loading/storing from/to a memory location that
was not intended.

This patch addresses this by using ldx/stdx if the offset is not
word-aligned. We load the offset into a temporary register (TMP_REG_2)
and use that as the index register in a subsequent ldx/stdx. We fix
PPC_LD() macro to mask off the last two bits, but enhance PPC_BPF_LL()
and PPC_BPF_STL() to factor in the offset value and generate the proper
instruction sequence. We also convert all existing users of PPC_LD() and
PPC_STD() to use these macros. All existing uses of these macros have
been audited to ensure that TMP_REG_2 can be clobbered.

Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.

It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].

This patch fixes the memory leak by removing the task lookup logic
completely.

[1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/

Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/
Fixes: c0c77d8f ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Same reasons than the ones explained in commit 4179cb5a
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx_ni() or napi_gro_frags() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro layer.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Fixes: 1bd4978a ("tun: honor IFF_UP in tun_get_user()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an interrupt is already pending when the interrupt is enabled on the
GXL phy, no IRQ will ever be triggered.

The fix is simply to make sure pending IRQs are cleared before setting
up the irq mask.

Fixes: cf127ff2 ("net: phy: meson-gxl: add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds missing sphinx documentation to the
socket.c's functions. Also fixes some whitespaces.

I also changed the style of older documentation as an
effort to have an uniform documentation style.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case create_singlethread_workqueue fails, the check returns
an error to callers to avoid potential NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several statements that contain extra spacing in
the indentation; clean this up by removing spaces. Also
add { } braces on if statement to keep to kernel coding
style.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is indented incorrectly; replace
spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We initially interpreted the fwmark parameter as a flag that simply turned
on the feature, using the whole skb->mark field as the index into the CAKE
tin_order array. However, it is quite common for different applications to
use different parts of the mask field for their own purposes, each using a
different mask.

Support this use of subsets of the mark by interpreting the TCA_CAKE_FWMARK
parameter as a bitmask to apply to the fwmark field when reading it. The
result will be right-shifted by the number of unset lower bits of the mask
before looking up the tin.

In the original commit message we also failed to credit Felix Resch with
originally suggesting the fwmark feature back in 2017; so the Suggested-By
in this commit covers the whole fwmark feature.

Fixes: 0b5c7efd ("sch_cake: Permit use of connmarks as tin classifiers")
Suggested-by: Felix Resch <fuller@beif.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_alloc_skb can fail and return a NULL pointer which is
dereferenced without a check. The patch avoids such a scenario.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sending non-linear skbs with jumbo frames, we set up the non-paged
data and mark that as a last segment, although the paged fragments are
also prepared. This will stall the TX queue and trigger a watchdog warning
(a simple reproducer is to run an iperf client mode TCP test with a large
MTU - networking fails instantly).

Fix by checking if the skb is non-linear.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0e80bdc9 ("stmmac: first frame prep at the end of xmit
routine") overlooked jumbo frames when re-ordering the code, and as a
result the own bit was not getting set anymore for the first jumbo frame
descriptor. Commit 487e2e22 ("net: stmmac: Set OWN bit for jumbo
frames") tried to fix this, but now the bit is getting set too early and
the DMA may start while we are still setting up the remaining descriptors.
And with the chain mode the own bit remains still unset.

Fix by setting the own bit at the end of xmit also with jumbo frames.

Fixes: 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine")
Fixes: 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.

It has always been used like this since v2.6
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc patches from Andrew Morton:

- a little bit more MM

- a few fixups

[ The "little bit more MM" is actually just one of the three patches
  Andrew sent for mm/filemap.c, I'm still mulling over two more of them
  from Josef Bacik     - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
  tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
  zram: default to lzo-rle instead of lzo
  filemap: pass vm_fault to the mmap ra helpers

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

: selftests: proc: proc-pid-vm
: ========================================
: proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed.
: Aborted

Because the vsyscall mapping is enabled.  Read from vsyscall page to tell
if vsyscall is being used.

Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2
Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian
Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lzo-rle gives higher performance and similar compression ratios to lzo.

Link: http://lkml.kernel.org/r/20190205155944.16007-4-dave.rodgman@arm.comSigned-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All of the arguments to these functions come from the vmf.

Cut down on the amount of arguments passed by simply passing in the vmf
to these two helpers.

Link: http://lkml.kernel.org/r/20181211173801.29535-3-josef@toxicpanda.comSigned-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Quentin Monnet says:

====================
Hi,
This set is an update to the documentation for the BPF helper functions in
the UAPI header bpf.h, used to generate the bpf-helpers(7) man page.

First patch contains fixes to the current documentation. The second patch
adds documentation for the two helpers bpf_spin_lock() and
bpf_spin_unlock(). The last patch simply reports the changes to the version
of that header in tools/.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Synchronise the bpf.h header under tools, to report the latest fixes and
additions to the documentation for the BPF helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add documentation for the BPF spinlock-related helpers to the doc in
bpf.h. I added the constraints and restrictions coming with the use of
spinlocks for BPF: not all of it is directly related to the use of the
helper, but I thought it would be nice for users to find them in the man
page.

This list of restrictions is nearly a verbatim copy of the list in
Alexei's commit log for those helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Another round of minor fixes for the documentation of the BPF helpers
located in the UAPI bpf.h header file. Changes include:

- Moving around description of some helpers, to keep the descriptions in
  the same order as helpers are declared (bpf_map_push_elem(), leftover
  from commit 90b1023f ("bpf: fix documentation for eBPF helpers"),
  bpf_rc_keydown(), and bpf_skb_ancestor_cgroup_id()).
- Fixing typos ("contex" -> "context").
- Harmonising return types ("void* " -> "void *", "uint64_t" -> "u64").
- Addition of the "bpf_" prefix to bpf_get_storage().
- Light additions of RST markup on some keywords.
- Empty line deletion between description and return value for
  bpf_tcp_sock().
- Edit for the description for bpf_skb_ecn_set_ce() (capital letters,
  acronym expansion, no effect if ECT not set, more details on return
  value).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrii Nakryiko says:

====================
This patchset adds ability to resolve forward-declared enums into their
corresponding full enum definition types during type deduplication,
eliminating one of the reasons for having duplicated graphs of types.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds test verifying new btf_dedup logic of resolving
forward-declared enums.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

GCC and clang support enum forward declarations as an extension. Such
forward-declared enums will be represented as normal BTF_KIND_ENUM types with
vlen=0. This patch adds ability to resolve such enums to their corresponding
fully defined enums. This helps to avoid duplicated BTF type graphs which only
differ by some types referencing forward-declared enum vs full enum.

One such example in kernel is enum irqchip_irq_state, defined in
include/linux/interrupt.h and forward-declared in include/linux/irq.h. This
causes entire struct task_struct and all referenced types to be duplicated in
btf_dedup output. This patch eliminates such duplication cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull more ACPI updates from Rafael Wysocki:
 "These fix a couple of issues and do some cleanups on top of the
  previous ACPI changes for 5.1-rc1.

  Specifics:

   - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko)

   - Prevent user space from getting confusing error values on failing
     ACPI sysfs accesses (Rafael Wysocki)

   - Simplify leaf node detection in the PPTT parsing code by using a
     new flag defined in ACPI 6.3 (Jeremy Linton)

   - Add missing "static" in some places in the ACPI configfs code (Andy
     Shevchenko)

   - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)"

* tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sysfs: Prevent get_status() from returning acpi_status
  ACPI / device_sysfs: Avoid OF modalias creation for removed device
  ACPI / configfs: Mark local data structures static
  ACPI / configfs: Mark local functions static
  ACPI: tables: Simplify PPTT leaf node detection
  ACPI: Documentation: Fix path for acpidbg tool

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previously merged
  power management material for 5.1-rc1 with one cpupower utility update
  that wasn't pushed earlier due to unfortunate timing.

  Specifics:

   - Fix registration of new cpuidle governors partially broken during
     the 5.0 development cycle by mistake (Rafael Wysocki).

   - Avoid integer overflows in the menu cpuidle governor by making it
     discard the overflowing data points upfront (Rafael Wysocki).

   - Fix minor mistake in the recent update of the iowait boost
     computation in the intel_pstate driver (Rafael Wysocki).

   - Drop incorrect __init annotation from one function in the pxa2xx
     cpufreq driver (Arnd Bergmann).

   - Fix the operating performance points (OPP) framework initialization
     for devices in multiple power domains if only one of them is
     scalable (Rajendra Nayak).

   - Fix mistake in dev_pm_opp_set_rate() which causes it to skip
     updating the performance state if the new frequency is the same as
     the old one (Viresh Kumar).

   - Rework the cancellation of wakeup source timers to avoid potential
     issues with it and do some cleanups unlocked by that change (Viresh
     Kumar, Rafael Wysocki).

   - Clean up the code computing the active/suspended time of devices in
     the PM-runtime framework after recent changes (Ulf Hansson).

   - Make the power management infrastructure code use pr_fmt()
     consistently (Joe Perches).

   - Clean up the generic power domains (genpd) framework somewhat
     (Aisheng Dong).

   - Improve kerneldoc comments for two functions in the cpufreq core
     (Rafael Wysocki).

   - Fix typo in a PM QoS file description comment (Aisheng Dong).

   - Update the handling of CPU boost frequencies in the cpupower
     utility (Abhishek Goel)"

* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpufreq: intel_pstate: Fix up iowait_boost computation
  PM / OPP: Update performance state when freq == old_freq
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor
  OPP: Fix handling of multiple power domains
  PM / QoS: Fix typo in file description
  cpufreq: pxa2xx: remove incorrect __init annotation
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time
  PM: Add and use pr_fmt()
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
  cpuidle: menu: Avoid overflows when computing variance
  tools/power/cpupower: Display boost frequency separately

Pull Microblaze update from Michal Simek:
 "Simplify debugfs initialization"

* tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: no need to check return value of debugfs_create functions

Pull networking fixes from David Miller:
 "More fixes in the queue:

  1) Netfilter nat can erroneously register the device notifier twice,
     fix from Florian Westphal.

  2) Use after free in nf_tables, from Pablo Neira Ayuso.

  3) Parallel update of steering rule fix in mlx5 river, from Eli
     Britstein.

  4) RX processing panic in lan743x, fix from Bryan Whitehead.

  5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.

  6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.

  7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
     modes, from Bryan Whitehead.

  8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  pptp: dst_release sk_dst_cache in pptp_sock_destruct
  MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
  l2tp: fix infoleak in l2tp_ip6_recvmsg()
  net/tls: Inform user space about send buffer availability
  net_sched: return correct value for *notify* functions
  lan743x: Fix TX Stall Issue
  net/mlx4_core: Fix qp mtt size calculation
  net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
  net/mlx4_core: Fix reset flow when in command polling mode
  mlxsw: minimal: Initialize base_mac
  mlxsw: core: Prevent duplication during QSFP module initialization
  net: dwmac-sun8i: fix a missing check of of_get_phy_mode
  net: sh_eth: fix a missing check of of_get_phy_mode
  net: 8390: fix potential NULL pointer dereferences
  net: fujitsu: fix a potential NULL pointer dereference
  net: qlogic: fix a potential NULL pointer dereference
  isdn: hfcpci: fix potential NULL pointer dereference
  Documentation: devicetree: add a new optional property for port mac address
  net: rocker: fix a potential NULL pointer dereference
  net: qlge: fix a potential NULL pointer dereference
  ...

Pull dmaengine updates from Vinod Koul:

 - dmatest updates for modularizing common struct and code

 - remove SG support for VDMA xilinx IP and updates to driver

 - Update to dw driver to support Intel iDMA controllers multi-block
   support

 - tegra updates for proper reporting of residue

 - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4

 - struct_size() usage and useless LIST_HEAD cleanups in subsystem.

 - qDMA controller driver for Layerscape SoCs

 - stm32-dma PM Runtime support

 - And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
   bcm2835, qcom_hidma etc

* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
  dmaengine: imx-sdma: fix consistent dma test failures
  dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
  dmaengine: imx-sdma: add clock ratio 1:1 check
  dmaengine: dmatest: move test data alloc & free into functions
  dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
  dmaengine: dmatest: wrap src & dst data into a struct
  dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
  dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
  dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
  dmaengine: ioatdma: Add Snow Ridge ioatdma device id
  dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dmaengine: mv_xor: Use correct device for DMA API
  Documentation :dmaengine: clarify DMA desc. pointer after submission
  Documentation: dmaengine: fix dmatest.rst warning
  dmaengine: k3dma: Add support for dma-channel-mask
  dmaengine: k3dma: Delete axi_config
  dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
  Documentation: bindings: dma: Add binding for dma-channel-mask
  Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
  ...