- 02 May, 2007 40 commits
-
-
Andi Kleen authored
It doesn't put the CPU into deeper sleep states, so it's better to use the standard idle loop to save power. But allow to reenable it anyways for benchmarking. I also removed the obsolete idle=halt on i386 Cc: andreas.herrmann@amd.com Signed-off-by:Andi Kleen <ak@suse.de>
-
Jeremy Fitzhardinge authored
Most of asm-x86_64/bugs.h is code which should be in a C file, so put it there. Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Now that relocation of the VDSO for COMPAT_VDSO users is done at runtime rather than compile time, it is possible to enable/disable compat mode at runtime. This patch allows you to enable COMPAT_VDSO mode with "vdso=2" on the kernel command line, or via sysctl. (Switching on a running system shouldn't be done lightly; any process which was relying on the compat VDSO will be upset if it goes away.) The COMPAT_VDSO config option still exists, but if enabled it just makes vdso_enabled default to VDSO_COMPAT. +From: Hugh Dickins <hugh@veritas.com> Fix oops from i386-make-compat_vdso-runtime-selectable.patch. Even mingetty at system startup finds it easy to trigger an oops while reading /proc/PID/maps: though it has a good hold on the mm itself, that cannot stop exit_mm() from resetting tsk->mm to NULL. (It is usually show_map()'s call to get_gate_vma() which oopses, and I expect we could change that to check priv->tail_vma instead; but no matter, even m_start()'s call just after get_task_mm() is racy.) Signed-off-by:
-
Jeremy Fitzhardinge authored
Some versions of libc can't deal with a VDSO which doesn't have its ELF headers matching its mapped address. COMPAT_VDSO maps the VDSO at a specific system-wide fixed address. Previously this was all done at build time, on the grounds that the fixed VDSO address is always at the top of the address space. However, a hypervisor may reserve some of that address space, pushing the fixmap address down. This patch does the adjustment dynamically at runtime, depending on the runtime location of the VDSO fixmap. [ Patch has been through several hands: Jan Beulich wrote the orignal version; Zach reworked it, and Jeremy converted it to relocate phdrs as well as sections. ] Signed-off-by:
-
Jeremy Fitzhardinge authored
identify_cpu() is used to identify both the boot CPU and secondary CPUs, but it performs some actions which only apply to the boot CPU. Those functions are therefore really __init functions, but because they're called by identify_cpu(), they must be marked __cpuinit. This patch splits identify_cpu() into identify_boot_cpu() and identify_secondary_cpu(), and calls the appropriate init functions from each. Also, identify_boot_cpu() and all the functions it dominates are marked __init. Signed-off-by:
-
Jeremy Fitzhardinge authored
Most of asm-i386/bugs.h is code which should be in a C file, so put it there. Signed-off-by:
-
Andi Kleen authored
Ugly ifdef, but should handle all 64bit platforms that have suitable zones. On some like Altix it's probably impossible without IOMMU use to get memory <4GB this way, but they have to live with that. Signed-off-by: -
Avi Kivity authored
The xmm space on x86_64 is 256 bytes. Signed-off-by:
Avi Kivity <avi@qumranet.com> Signed-off-by:
-
Andi Kleen authored
As per i386 patch: move X86_EFLAGS_IF et al out to a new header: processor-flags.h, so we can include it from irqflags.h and use it in raw_irqs_disabled_flags(). As a side-effect, we could now use these flags in .S files. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jan Beulich authored
Under CONFIG_DISCONTIGMEM, assuming that a !pfn_valid() implies all subsequent pfn-s are also invalid is wrong. Thus replace this by explicitly checking against the E820 map. AK: make e820 on x86-64 not initdata Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
Mark Langsdorf <mark.langsdorf@amd.com>
-
Jeremy Fitzhardinge authored
Rather than using a single constant PERCPU_ENOUGH_ROOM, compute it as the sum of kernel_percpu + PERCPU_MODULE_RESERVE. This is now common to all architectures; if an architecture wants to set PERCPU_ENOUGH_ROOM to something special, then it may do so (ia64 is the only one which does). Signed-off-by:
-
Andi Kleen authored
All were already in some header Signed-off-by: -
Andi Kleen authored
Signed-off-by: -
Jeremy Fitzhardinge authored
machine_ops is an interface for the machine_* functions defined in <linux/reboot.h>. This is intended to allow hypervisors to intercept the reboot process, but it could be used to implement other x86 subarchtecture reboots. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add a smp_ops interface. This abstracts the API defined by <linux/smp.h> for use within arch/i386. The primary intent is that it be used by a paravirtualizing hypervisor to implement SMP, but it could also be used by non-APIC-using sub-architectures. This is related to CONFIG_PARAVIRT, but is implemented unconditionally since it is simpler that way and not a highly performance-sensitive interface. Signed-off-by:
-
Rusty Russell authored
Now we have an explicit per-cpu GDT variable, we don't need to keep the descriptors around to use them to find the GDT: expose cpu_gdt directly. We could go further and make load_gdt() pack the descriptor for us, or even assume it means "load the current cpu's GDT" which is what it always does. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Bernhard Walle authored
Fix "Section mismatch" warnings in arch/x86_64/kernel/time.c Signed-off-by:
Bernhard Walle <bwalle@suse.de> Signed-off-by:
-
Jan Beulich authored
commit 5e518d76 did the same change to i386's variant. With this change, i386's and x86-64's versions are identical, raising the question whether the x86-64 one should go (just like there's only one instance of edd.S). Signed-off-by:
-
Konrad Rzeszutek authored
This patch touches the NMI watchdog every MAX_ORDER_NR_PAGES to inhibit the machine from triggering an NMI while the CPUs are locked. This situation is happening on boxes with more than 64CPUs and 128GB of RAM when Alt-SysRq-m is performed. It has been succesfully tested for regression on uni, 2, 4, 8 32, and 64 CPU boxes with various memory configuration. Signed-off-by: -
Eric Dumazet authored
Current vsyscall_gtod_data is large (3 or 4 cache lines dirtied at timer interrupt). We can shrink it to exactly 64 bytes (1 cache line on AMD64) Instead of copying a whole struct clocksource, we copy only needed fields. I deleted an unused field : offset_base This patch fixes one oddity in vgettimeofday(): It can returns a timeval with tv_usec = 1000000. Maybe not a bug, but why not doing the right thing ? Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Eric Dumazet authored
There is a tiny probability that the return value from vtime(time_t *t) is Signed-off-by:
-
Adrian Bunk authored
Many years ago, UNEXPECTED_IO_APIC() contained printk()'s (but nothing more). Now that it's completely empty for years, we can as well remove it. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
- there's no reason for duplicating the prototype from include/linux/syscalls.h in include/asm-x86_64/unistd.h - every file should #include the headers containing the prototypes for it's global functions Signed-off-by:
-
Christoph Lameter authored
x86_64 currently simulates a list using the index and private fields of the page struct. Seems that the code was inherited from i386. But x86_64 does not use the slab to allocate pgds and pmds etc. So the lru field is not used by the slab and therefore available. This patch uses standard list operations on page->lru to realize pgd tracking. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Parag Warudkar authored
Signed-off-by:
Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by:
-
Andi Kleen authored
suggested by Jan Beulich Signed-off-by: -
Andi Kleen authored
Move X86_EFLAGS_IF et al out to a new header: processor-flags.h, so we can include it from irqflags.h and use it in raw_irqs_disabled_flags(). As a side-effect, we could now use these flags in .S files. Signed-off-by:
-
Parag Warudkar authored
Signed-off-by:
-
Jan Beulich authored
On x86-64, kernel memory freed after init can be entirely unmapped instead of just getting 'poisoned' by overwriting with a debug pattern. On i386 and x86-64 (under CONFIG_DEBUG_RODATA), kernel text and bug table can also be write-protected. Compared to the first version, this one prevents re-creating deleted mappings in the kernel image range on x86-64, if those got removed previously. This, together with the original changes, prevents temporarily having inconsistent mappings when cacheability attributes are being changed on such pages (e.g. from AGP code). While on i386 such duplicate mappings don't exist, the same change is done there, too, both for consistency and because checking pte_present() before using various other pte_XXX functions is a requirement anyway. At once, i386 code gets adjusted to use pte_huge() instead of open coding this. AK: split out cpa() changes Signed-off-by:
-
Jan Beulich authored
Fix various broken corner cases in i386 and x86-64 change_page_attr. AK: split off from tighten kernel image access rights Signed-off-by:
-
Rusty Russell authored
paravirt.c used to implement native versions of all low-level functions. Far cleaner is to have the native versions exposed in the headers and as inline native_XXX, and if !CONFIG_PARAVIRT, then simply #define XXX native_XXX. There are several nice side effects: 1) write_dt_entry() now takes the correct "struct Xgt_desc_struct *" not "void *". 2) load_TLS is reintroduced to the for loop, not manually unrolled with a #error in case the bounds ever change. 3) Macros become inlines, with type checking. 4) Access to the native versions is trivial for KVM, lguest, Xen and others who might want it. Signed-off-by:
-
Sebastien Dugue authored
Rename boot_gdt_table to boot_gdt to avoid the duplicate T(able). Signed-off-by:
Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by:
-
Rusty Russell authored
We now have cpu_init() and secondary_cpu_init() doing nothing but calling _cpu_init() with the same arguments. Rename _cpu_init() to cpu_init() and use it as a replcement for secondary_cpu_init(). Signed-off-by:
-
Rusty Russell authored
Now we are no longer dynamically allocating the GDT, we don't need the "cpu_gdt_table" at all: we can switch straight from "boot_gdt_table" to the per-cpu GDT. This means initializing the cpu_gdt array in C. The boot CPU uses the per-cpu var directly, then in smp_prepare_cpus() it switches to the per-cpu copy just allocated. For secondary CPUs, the early_gdt_descr is set to point directly to their per-cpu copy. For UP the code is very simple: it keeps using the "per-cpu" GDT as per SMP, but we never have to move. Signed-off-by:
-
Rusty Russell authored
Allocating PDA and GDT at boot is a pain. Using simple per-cpu variables adds happiness (although we need the GDT page-aligned for Xen, which we do in a followup patch). [akpm@linux-foundation.org: build fix] Signed-off-by:
-
Bernhard Walle authored
Because the command line is increased to 2048 characters after 2.6.21, it's not possible for boot loaders and userspace tools to determine the length of the command line the kernel can understand. The benefit of knowing the length is that users can be warned if the command line size is too long which prevents surprise if things don't work after bootup. This patch updates the boot protocol to contain a field called "cmdline_size" that contain the length of the command line (excluding the terminating zero). The patch also adds missing fields (of protocol version 2.05) to the x86_64 setup code. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Ian Campbell authored
The specific case I am encountering is kdump under Xen with a 64 bit hypervisor and 32 bit kernel/userspace. The dump created is 64 bit due to the hypervisor but the dump kernel is 32 bit for maximum compatibility. It's possibly less likely to be useful in a purely native scenario but I see no reason to disallow it. [akpm@linux-foundation.org: build fix] Signed-off-by:
Ian Campbell <ian.campbell@xensource.com> Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Cc: Horms <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Rusty Russell authored
GCC (4.1 at least) unrolls it anyway, but I can't believe this code was ever justifiable. (I've also submitted a patch which cleans up i386, which is even uglier). Signed-off-by:
-
Rusty Russell authored
Whenever we schedule, __switch_to calls load_esp0 which does: tss->esp0 = thread->esp0; This is never initialized for the initial thread (ie "swapper"), so when we're scheduling that, we end up setting esp0 to 0. This is fine: the swapper never leaves ring 0, so this field is never used. lguest, however, gets upset that we're trying to used an unmapped page as our kernel stack. Rather than work around it there, let's initialize it. Signed-off-by:
-
Andrew Morton authored
The lguest patches somehow managed to trigger this: In file included from arch/i386/lguest/lguest.c:38: include/asm/asm-offsets.h:67:1: warning: "VDSO_PRELINK" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:15, from include/linux/device.h:21, from include/linux/interrupt.h:15, from arch/i386/lguest/lguest.c:27: include/asm/elf.h:140:1: warning: this is the location of the previous definition I assume that using the same identifier twice was a bad idea.. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
