- 16 Jan, 2011 23 commits
-
-
Al Viro authored
Instead of splitting refcount between (per-cpu) mnt_count and (SMP-only) mnt_longrefs, make all references contribute to mnt_count again and keep track of how many are longterm ones. Accounting rules for longterm count: * 1 for each fs_struct.root.mnt * 1 for each fs_struct.pwd.mnt * 1 for having non-NULL ->mnt_ns * decrement to 0 happens only under vfsmount lock exclusive That allows nice common case for mntput() - since we can't drop the final reference until after mnt_longterm has reached 0 due to the rules above, mntput() can grab vfsmount lock shared and check mnt_longterm. If it turns out to be non-zero (which is the common case), we know that this is not the final mntput() and can just blindly decrement percpu mnt_count. Otherwise we grab vfsmount lock exclusive and do usual decrement-and-check of percpu mnt_count. For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm(); namespace.c uses the latter in places where we don't already hold vfsmount lock exclusive and opencodes a few remaining spots where we need to manipulate mnt_longterm. Note that we mostly revert the code outside of fs/namespace.c back to what we used to have; in particular, normal code doesn't need to care about two kinds of references, etc. And we get to keep the optimization Nick's variant had bought us... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Expiry-related code calls umount_tree() several times with the same list to collect vfsmounts to. Which is fine, except that umount_tree() implicitly assumed that the list would be empty on each call - it moves the victims over there and then iterates through the list kicking them out. It's *almost* idempotent, so everything nearly worked. However, mnt->ghosts handling (and thus expirability checks) had been broken - that part was not idempotent... The fix is trivial - use local temporary list, splice it to the the collector list when we are through. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Merge the remaining autofs4 dentry ops tables. It doesn't matter if d_automount and d_manage are present on something that's not mountable or holdable as these ops are only used if the appropriate flags are set in dentry->d_flags. [AV] switch to ->s_d_op, since now _everything_ on autofs4 is using the same dentry_operations. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Unexport do_add_mount() and make ->d_automount() return the vfsmount to be added rather than calling do_add_mount() itself. follow_automount() will then do the addition. This slightly complicates things as ->d_automount() normally wants to add the new vfsmount to an expiration list and start an expiration timer. The problem with that is that the vfsmount will be deleted if it has a refcount of 1 and the timer will not repeat if the expiration list is empty. To this end, we require the vfsmount to be returned from d_automount() with a refcount of (at least) 2. One of these refs will be dropped unconditionally. In addition, follow_automount() must get a 3rd ref around the call to do_add_mount() lest it eat a ref and return an error, leaving the mount we have open to being expired as we would otherwise have only 1 ref on it. d_automount() should also add the the vfsmount to the expiration list (by calling mnt_set_expiry()) and start the expiration timer before returning, if this mechanism is to be used. The vfsmount will be unlinked from the expiration list by follow_automount() if do_add_mount() fails. This patch also fixes the call to do_add_mount() for AFS to propagate the mount flags from the parent vfsmount. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well as when it is in Ref-walk mode. This permits __follow_mount_rcu() to call d_manage() directly. d_manage() needs a parameter to indicate that it is in RCU-walk mode as it isn't allowed to sleep if in that mode (but should return -ECHILD instead). autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon accesses it and otherwise request dropping back to ref-walk mode. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Remove a further kludge from __do_follow_link() as it's no longer required with the automount code. This reverts the non-helper-function parts of 051d3812, which breaks union mounts. Reported-by: vaurora@redhat.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
Increase the autofs module sub-version so we can tell what kernel implementation is being used from user space debug logging. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
Version 4 of autofs provides a pseudo direct mount implementation that relies on directories at the leaves of a directory tree under an indirect mount to trigger mounts. This patch adds support for that functionality. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
It is possible for the check in wait.c:validate_request() to return an incorrect result if the dentry that was mounted upon has changed during the callback. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
When this function is called the local reference count does't need to be updated since the dentry is going away and dput definitely must not be called here. Also the autofs info struct field inode isn't used so remove it. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
There are now two distinct dentry operations uses. One for dentrys that trigger mounts and one for dentrys that do not. Rationalize the use of these dentry operations and rename them to reflect their function. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
Since the use of ->follow_link() has been eliminated there is no need to separate the indirect and direct inode operations. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
Remove code that is not used due to the use of ->d_automount() and ->d_manage(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
This patch required a previous patch to add the ->d_automount() dentry operation. Add a function to use the newly defined ->d_manage() dentry operation for blocking during mount and expire. Whether the VFS calls the dentry operations d_automount() and d_manage() is controled by the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags. autofs uses the d_automount() operation to callback to user space to request mount operations and the d_manage() operation to block walks into mounts that are under construction or destruction. In order to prevent these functions from being called unnecessarily the DMANAGED_* flags are cleared for cases which would cause this. In the common case the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags are both set for dentrys waiting to be mounted. The DMANAGED_TRANSIT flag is cleared upon successful mount request completion and set during expire runs, both during the dentry expire check, and if selected for expire, is left set until a subsequent successful mount request completes. The exception to this is the so-called rootless multi-mount which has no actual mount at its base. In this case the DMANAGED_AUTOMOUNT flag is cleared upon successful mount request completion as well and set again after a successful expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Ian Kent authored
Add a function to use the newly defined ->d_automount() dentry operation for triggering mounts instead of doing the user space callback in ->lookup() and ->d_revalidate(). Note, to be useful the subsequent patch to add the ->d_manage() dentry operation is also needed so the discussion of functionality is deferred to that patch. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Remove the automount through follow_link() kludge code from pathwalk in favour of using d_automount(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Make CIFS use the new d_automount() dentry operation rather than abusing follow_link() on directories. [NOTE: THIS IS UNTESTED!] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Steve French <sfrench@samba.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Make NFS use the new d_automount() dentry operation rather than abusing follow_link() on directories. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Make AFS use the new d_automount() dentry operation rather than abusing follow_link() on directories. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add an AT_NO_AUTOMOUNT flag to suppress terminal automounting of automount point directories. This can be used by fstatat() users to permit the gathering of attributes on an automount point and also prevent mass-automounting of a directory of automount points by ls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f [<ffffffff80057a2f>] lookup_create+0x46/0x80 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14 [<ffffffff800e6d55>] do_rmdir+0x77/0xde [<ffffffff8005d229>] tracesys+0x71/0xe0 [<ffffffff8005d28d>] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells <dhowells@redhat.com> Was-Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a dentry op (d_automount) to handle automounting directories rather than abusing the follow_link() inode operation. The operation is keyed off a new dentry flag (DCACHE_NEED_AUTOMOUNT). This also makes it easier to add an AT_ flag to suppress terminal segment automount during pathwalk and removes the need for the kludge code in the pathwalk algorithm to handle directories with follow_link() semantics. The ->d_automount() dentry operation: struct vfsmount *(*d_automount)(struct path *mountpoint); takes a pointer to the directory to be mounted upon, which is expected to provide sufficient data to determine what should be mounted. If successful, it should return the vfsmount struct it creates (which it should also have added to the namespace using do_add_mount() or similar). If there's a collision with another automount attempt, NULL should be returned. If the directory specified by the parameter should be used directly rather than being mounted upon, -EISDIR should be returned. In any other case, an error code should be returned. The ->d_automount() operation is called with no locks held and may sleep. At this point the pathwalk algorithm will be in ref-walk mode. Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is added to handle mountpoints. It will return -EREMOTE if the automount flag was set, but no d_automount() op was supplied, -ELOOP if we've encountered too many symlinks or mountpoints, -EISDIR if the walk point should be used without mounting and 0 if successful. The path will be updated to point to the mounted filesystem if a successful automount took place. __follow_mount() is replaced by follow_managed() which is more generic (especially with the patch that adds ->d_manage()). This handles transits from directories during pathwalk, including automounting and skipping over mountpoints (and holding processes with the next patch). __follow_mount_rcu() will jump out of RCU-walk mode if it encounters an automount point with nothing mounted on it. follow_dotdot*() does not handle automounts as you don't want to trigger them whilst following "..". I've also extracted the mount/don't-mount logic from autofs4 and included it here. It makes the mount go ahead anyway if someone calls open() or creat(), tries to traverse the directory, tries to chdir/chroot/etc. into the directory, or sticks a '/' on the end of the pathname. If they do a stat(), however, they'll only trigger the automount if they didn't also say O_NOFOLLOW. I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their inodes as automount points. This flag is automatically propagated to the dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate(). This saves NFS and could save AFS a private flag bit apiece, but is not strictly necessary. It would be preferable to do the propagation in d_set_d_op(), but that doesn't normally have access to the inode. [AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu() succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after that, rather than just returning with ungrabbed *path] Signed-off-by: David Howells <dhowells@redhat.com> Was-Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
do_lookup() has a path leading from LOOKUP_RCU case to non-RCU crossing of mountpoints, which breaks things badly. If we hit need_revalidate: and do nothing in there, we need to come back into LOOKUP_RCU half of things, not to done: in non-RCU one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 14 Jan, 2011 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Report wakeup events before resuming devices PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events PCI: sysfs: Update ROM to include default owner write access x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available PCI/ACPI: Request _OSC control once for each root bridge (v3) PCI: enable pci=bfsort by default on future Dell systems PCI/PCIe: Clear Root PME Status bits early during system resume PCI: pci-stub: ignore zero-length id parameters x86/PCI: irq and pci_ids patch for Intel Patsburg PCI: Skip id checking if no id is passed PCI: fix __pci_device_probe kernel-doc warning PCI: make pci_restore_state return void PCI: Disable ASPM if BIOS asks us to PCI: Add mask bit definition for MSI-X table PCI: MSI: Move MSI-X entry definition to pci_regs.h Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the meantime been converted to not use legacy PCI power management, and thus no longer use pci_restore_state() at all (and that caused trivial conflicts with the "make pci_restore_state return void" patch)
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: (21 commits) power_supply: Add MAX17042 Fuel Gauge Driver olpc_battery: Fix up XO-1.5 properties list olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW olpc_battery: Add support for CHARGE_NOW olpc_battery: Add support for CHARGE_FULL_DESIGN olpc_battery: Ambient temperature is not available on XO-1.5 jz4740-battery: Should include linux/io.h s3c_adc_battery: Add gpio_inverted field to pdata power_supply: Don't use flush_scheduled_work() power_supply: Fix use after free and memory leak gpio-charger: Fix potential race between irq handler and probe/remove gpio-charger: Provide default name for the power_supply gpio-charger: Check result of kzalloc jz4740-battery: Check if platform_data is supplied isp1704_charger: Detect charger after probe isp1704_charger: Set isp->dev before anything needs it isp1704_charger: Detect HUB/Host chargers isp1704_charger: Correct length for storing model power_supply: Add gpio charger driver jz4740-battery: Protect against concurrent battery readings ...
-
Tejun Heo authored
flush_scheduled_work() is going away. afs needs to make sure all the works it has queued have finished before being unloaded and there can be arbitrary number of pending works. Add afs_wq and use it as the flush domain instead of the system workqueue. Also, convert cancel_delayed_work() + flush_scheduled_work() to cancel_delayed_work_sync() in afs_mntpt_kill_timer(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tejun Heo authored
rxrpc_workqueue isn't depended upon while reclaiming memory. Convert to alloc_workqueue() without WQ_MEM_RECLAIM. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akshat Aranya authored
fscache_submit_exclusive_op() adds an operation to the pending list if other operations are pending. Fix the check for pending ops as n_ops must be greater than 0 at the point it is checked as it is incremented immediately before under lock. Signed-off-by: Akshat Aranya <aranya@nec-labs.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: kernel: fix hlist_bl again cgroups: Fix a lockdep warning at cgroup removal fs: namei fix ->put_link on wrong inode in do_filp_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) mfd: ab8500-core chip version cut 2.0 support mfd: Flag WM831x /IRQ as a wake source mfd: Convert WM831x away from legacy I2C PM operations regulator: Support MAX8998/LP3974 DVS-GPIO mfd: Support LP3974 RTC i2c: Convert SCx200 driver from using raw PCI to platform device x86: OLPC: convert olpc-xo1 driver from pci device to platform device mfd: MAX8998/LP3974 hibernation support mfd/ab8500: remove spi support mfd: Remove ARCH_U8500 dependency from AB8500 misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage mfd: Add __devexit annotation for vx855_remove mfd: twl6030 irq_data conversion. gpio: Fix cs5535 printk warnings misc: Fix cs5535 printk warnings mfd: Convert Wolfson MFD drivers to use irq_data accessor function mfd: Convert TWL4030 to new irq_ APIs mfd: Convert tps6586x driver to new irq_ API mfd: Convert tc6393xb driver to new irq_ APIs mfd: Convert t7166xb driver to new irq_ API ...
-
Rafael J. Wysocki authored
Make wakeup events be reported by the PCI subsystem before attempting to resume devices or queuing up runtime resume requests for them, because wakeup events should be reported as soon as they have been detected. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
After recent changes related to wakeup events pm_wakeup_event() automatically checks if the given device is configured to signal wakeup, so pci_wakeup_event() may be a static inline function calling pm_wakeup_event() directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Alex Williamson authored
The PCI sysfs ROM interface requires an enabling write to access the ROM image, but the default file mode is 0400. The original proposed patch adding sysfs ROM support was a true read-only interface, with the enabling bit coming in as a feature request. I suspect it was simply an oversight that the file mode didn't get updated to match the API. Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
This functionality is known to be incomplete, so discourage its use in general-purpose kernels. The only reason to use this driver is to support PCI hotplug on CNB20LE- based machines that don't have ACPI, and there are very few such systems. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
The broadcom_bus.c quirk was written (without benefit of documentation) to support PCI hotplug on an old system that doesn't have ACPI. As such, we should only use it when the system doesn't have ACPI. If the system does have ACPI and we need the host bridge description, we should get it from the ACPI _CRS method. On machines older than 2008, we currently ignore _CRS, but that doesn't mean we should use broadcom_bus.c. It means we should either (a) do what we've done in the past and assume everything in the PCI gap is routed to bus 0 (so hotplug may not work), or (b) arrange to use _CRS. This patch does (a). Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Narendra_K@Dell.com authored
This patch enables pci=bfsort by default on future Dell systems. It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort accordingly. Offset Name Length Value Description 04 Flags0 Word Varies Bits 9-10 - 10:9 = 00 Unknown - 10:9 = 01 Breadth First - 10:9 = 10 Depth First - 10:9 = 11 Reserved 1. Any time pci=bfsort has to be enabled on a system, we need to add the model number of the system to the white list. With this patch, that is not required. 2. Typically, model number has to be added to the white list when the system is under development. With this change, that is not required. Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] MAINTAINERS: Update zcrypt driver entry [S390] Randomize PIEs [S390] Randomise the brk region [S390] Add is_32bit_task() helper function [S390] Randomize lower bits of stack address [S390] Randomize mmap start address [S390] Rearrange mmap.c [S390] Enable flexible mmap layout for 64 bit processes [S390] vdso: dont map at mmap_base [S390] reduce miminum gap between stack and mmap_base [S390] mmap: consider stack address randomization [S390] Update default configuration [S390] cio: path_event overindication after resume
-
Lennert Buytenhek authored
Commit a1f5f22a ("gpio: timbgpio: irq_data conversion") was slightly too enthusiastic in converting timbgpio_irq() over to take an irq_data * argument instead of an unsigned int irq argument, as it is a flow handler, which still take IRQ numbers for now. (And on top of that, it was using the wrong accessors.) This fixes it up, and seems to build without warnings. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
cgroup can't use simple_lookup(), since that'd override its desired ->d_op. Tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-