Merge tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree chanage for 6.6:

- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
  Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
  thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
  support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
  Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
  regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
  Kozlowski, etc.
- Other small and random changes.

* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
  arm64: dts: imx8mq-librem5-devkit: Drop power-supply
  arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
  arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
  arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
  arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
  arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
  arm64: dts: imx8mp-debix: remove unused fec pinctrl node
  arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
  arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
  arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
  arm64: dts: imx8mp-evk: Add HDMI support
  arm64: dts: freescale: verdin-imx8mp: dev: add sound card
  arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
  arm64: dts: imx8mm-emcon: Fix the regulator names
  arm64: dts: imx: Pass a single BD71847 clock entry
  arm64: dts: ls1028a: add l1 and l2 cache info
  arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX ARM device tree change for 6.6:

- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
  Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
  for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.

* tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
  ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
  ARM: dts: imx6ul: Fix nand-controller #size-cells
  ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
  ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
  ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
  ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
  ARM: dts: imx53-smd: Remove invalid SPI flash entry
  ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
  ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: imx: Remove 'compatible' from the pfuze nodes
  ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
  ARM: dts: nxp: mxs: split interrupts per cells
  ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
  ARM: dts: imx28: drop incorrect reg in fixed regulators
  ARM: dts: imx27: drop incorrect reg in fixed regulators
  ARM: dts: imx25: drop incorrect reg in fixed regulators
  ARM: dts: imx23: drop incorrect reg in fixed regulators
  ARM: dts: imx50-kobo-aura: switch to enable-gpios
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX dt-bindings update for 6.6:

- Add new compatibles for various i.MX based boards: DEBIX, TQMa93xxLA,
  Gateworks i.MX8M, etc.

* tag 'imx-bindings-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: Add Polyhex DEBIX SOM A based boards
  dt-bindings: arm: fsl: fix DEBIX binding
  dt-bindings: arm: fsl: add TQ-Systems LS1021A board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw73xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw72xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw71xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
  dt-bindings: arm: add TQMa93xxLA SOM

Link: https://lore.kernel.org/r/20230813133354.847010-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- Add D1 CAN controller nodes

* tag 'sunxi-dt-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  riscv: dts: allwinner: d1: Add CAN controller nodes

Link: https://lore.kernel.org/r/ZNjRV0kJ7v7+DAH5@wens.twSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetrees for v6.6

StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
  riscv: dts: starfive: jh7110: Fix GMAC configuration
  riscv: dts: starfive - Add hwrng node for JH7110 SoC
  riscv: dts: starfive - Add crypto and DMA node for JH7110
  riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
  riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
  riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
  riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
  riscv: dts: starfive: jh7110: add dma controller node
  riscv: dts: starfive: Add spi node and pins configuration
  riscv: dts: starfive: Add USB dts node for JH7110
  riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
  riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
  riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
  riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
  riscv: dts: starfive: jh7110: Add ethernet device nodes
  riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
  riscv: dts: starfive: jh7110: Add syscon nodes
  riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
  riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
  dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
  ...

Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

mvebu dt for 6.6 (part 1)

Fix style issue and incorrect syntax

* tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
  ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
  ARM: dts: marvell: add missing space before {

Link: https://lore.kernel.org/r/87h6p4t0lv.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

mvebu dt64 for 6.6 (part 1)

Add the NAND Flash Controller on the AC5/AC5X SOC device tree
Fix style issue

* tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: Add NAND flash controller to AC5
  arm64: dts: marvell: add missing space before {

Link: https://lore.kernel.org/r/87edk8t0kl.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Fixed configuration to improve the speed of TCP RX.

Before:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47604
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec  36.3 MBytes   305 Mbits/sec
  [  5]   1.00-2.00   sec  35.6 MBytes   299 Mbits/sec
  [  5]   2.00-3.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   3.00-4.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   4.00-5.00   sec  35.7 MBytes   300 Mbits/sec
  [  5]   5.00-6.00   sec  35.4 MBytes   297 Mbits/sec
  [  5]   6.00-7.00   sec  37.1 MBytes   311 Mbits/sec
  [  5]   7.00-8.00   sec  35.6 MBytes   298 Mbits/sec
  [  5]   8.00-9.00   sec  36.4 MBytes   305 Mbits/sec
  [  5]   9.00-10.00  sec  36.3 MBytes   304 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec   361 MBytes   303 Mbits/sec        receiver

After:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47710
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec   111 MBytes   932 Mbits/sec
  [  5]   1.00-2.00   sec   111 MBytes   934 Mbits/sec
  [  5]   2.00-3.00   sec   111 MBytes   934 Mbits/sec
  [  5]   3.00-4.00   sec   111 MBytes   934 Mbits/sec
  [  5]   4.00-5.00   sec   111 MBytes   934 Mbits/sec
  [  5]   5.00-6.00   sec   111 MBytes   935 Mbits/sec
  [  5]   6.00-7.00   sec   111 MBytes   934 Mbits/sec
  [  5]   7.00-8.00   sec   111 MBytes   935 Mbits/sec
  [  5]   8.00-9.00   sec   111 MBytes   934 Mbits/sec
  [  5]   9.00-10.00  sec   111 MBytes   934 Mbits/sec
  [  5]  10.00-10.00  sec   167 KBytes   933 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec  1.09 GBytes   934 Mbits/sec        receiver
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Fixes: 1ff166c9 ("riscv: dts: starfive: jh7110: Add ethernet device nodes")
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[conor: converted to decimal per emil's request]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

The Allwinner D1, T113 provide two CAN controllers that are variants
of the R40 controller.

I have tested support for these controllers on two boards:

- A Lichee Panel RV 86 Panel running a D1 chip
- A Mango Pi MQ Dual running a T113-s3 chip

Both of these fully support both CAN controllers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20230807191952.2019208-1-contact@jookia.orgSigned-off-by: Chen-Yu Tsai <wens@csie.org>

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

  dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

  armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

"make dtbs_check":

    arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"make dtbs_check":

    arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

File names inside the file does not add much and just makes it
difficult to move the files, often the file name is not updated
and becomes wrong. Remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This looks better and allows us to see the row and column numbers
more easily. Switch to this macro here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Writing this bit can be handled by the syscon-reboot driver.
Add this node to DT.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM changes for v6.6

1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
   seems not to work, but at least HDMI improved and dtbs_check is
   happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
   'gpios' suffix over 'gpio', update i2c-arb device node to newer
   binding.
5. Few white-space cleanups.

* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
  ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
  ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
  ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
  ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
  ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
  ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
  ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
  ARM: dts: s5pv210: minor whitespace cleanup around '='
  ARM: dts: exynos: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.6

1. Add dedicated compatibles for PWM block.
2. Add PWM to ExynosAutov9 SADK board.
3. Few white-space and other cleanups.

* tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay
  arm64: dts: exynos: add pwm node for exynosautov9-sadk
  dt-bindings: pwm: samsung: add exynosautov9 compatible
  arm64: dts: fsd: minor whitespace cleanup around '='
  arm64: dts: exynos: minor whitespace cleanup around '='
  arm64: dts: exynos: add missing space before {

Link: https://lore.kernel.org/r/20230810151250.220202-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt

ASPEED device tree updates for 6.6

 - New machines

  * Inventec's Starscream AST2600 BMC, for a x86 server platform
  * Meta's Yossemite 4 AST2600 BMC, for a multi-node server platform

 - Big device tree rework for IBM's Power10 BMC platforms

 - Updates for wedge400 and Mt Mitchell

 - AST2600 I3C and VUART descriptions

* tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: Add AST2600 I3C control pins
  ARM: dts: aspeed: everest: Move common devices up
  ARM: dts: aspeed: everest: Reorganise FSI description
  ARM: dts: aspeed: rainier: Reorganise FSI description
  ARM: dts: aspeed: bonnell: Reorganise FSI description
  ARM: dts: aspeed: Add P10 FSI descriptions
  ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC
  dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
  ARM: dts: aspeed: wedge400: Set eMMC max frequency
  ARM: dts: aspeed: wedge400: Enable more ADC channels
  ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi
  ARM: dts: aspeed: rainier: Remove TPM device
  ARM: dts: aspeed: Add AST2600 VUARTs
  ARM: dts: aspeed: mtmitchell: Add MCTP
  ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems
  ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
  ARM: dts: aspeed: Adding Inventec Starscream BMC
  dt-bindings: arm: aspeed: add Inventec starscream-bmc
  ARM: dts: aspeed: bonnell: Add DIMM SPD

Link: https://lore.kernel.org/r/CACPK8Xc76O5kLEAXRtbFXZcP=ObrKR0Kpez_er+zV2vZffZe7A@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt

Devicetree changes for omaps for v6.6

Updates for opp and pinctrl nodes to follow the devicetree bindings.

* tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm: dts: ti: omap: Fix OPP table node names
  arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
  arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
  ARM: dts: ti: add missing space before {
  ARM: dts: ti: split interrupts per cells
  ARM: dts: Unify pinctrl-single pin group nodes for davinci

Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt

Devicetree binding changes for omaps for v6.6

Just one change to get started on SoC yaml binding changes for omaps.

* tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  dt-bindings: omap: Partially convert omap.txt to yaml

Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- Add D1 GPADC node
- Introduce support for OrangePi Zero 3 SBC
- Enable DT overlay support for Allwinner H3 boards

* tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
  arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
  dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
  arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
  riscv: dts: allwinner: d1: Add GPADC node

Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The defined value for "status" is "disabled", not "disable".
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230804225813.12493-1-robh@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt

Amlogic ARM64 DT changes for v6.6:
- Add initial support for A311D2
- Add AN400 board
- Add gpio_intc, power domain for C3 SoC
- Again some DT bindings fixes & cleanups

* tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan
  arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name
  arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name
  arm64: dts: amlogic: drop redundant status=okay in sound nodes
  arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios
  arm64: dts: add support for C3 power domain controller
  arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs
  arm64: dts: add board AN400
  dt-bindings: arm: amlogic: add board AN400
  arm64: dts: amlogic: minor whitespace cleanup around '='
  arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
  dt-bindings: arm: amlogic: add Amlogic A311D2 bindings

Link: https://lore.kernel.org/r/d5f95654-ebcd-bd37-02f9-840e50b17e44@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt

Armv8 Juno/FVP update for v6.6

Just a single minor whitespace cleanup in couple of FVP device trees.

* tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: arm: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: ZynqMP DT changes for v6.6

- Describe caches
- Fix i2c gpio recovery description
- Setting up default i2c frequency
- Describe GEM TSU clock and assigned rates for SOMs
- Reserved 1MB for internal firmware usage
- Fix dwc3 IRQ description
- Describe interrupts by using macros

* tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Describe interrupts by using macros
  arm64: zynqmp: Fix dwc3 usb interrupt description
  arm64: zynqmp: Add memory reserved node for k26 Kria SOM board
  arm64: zynqmp: Assign TSU clock frequency for GEMs
  arm64: zynqmp: Setting default i2c clock frequency to 400kHz
  arm64: zynqmp: Fix open drain warning on ZynqMP
  arm64: zynqmp: Add L2 cache nodes

Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: DT: HiSilicon ARM32 DT updates for v6.6

- Fix "status" values

* tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
  ARM: dts: hisilicon: Fix "status" values

Link: https://lore.kernel.org/r/64CC9B21.70907@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM64: DT: HiSilicon ARM64 DT updates for v6.6

- Miscellaneous fixes according the DTS coding style
- Correct the clocks order of the sd0 for the hi3798cv200

* tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
  arm64: dts: hi3798cv200: Fix clocks order of sd0
  arm64: dts: hisilicon: add missing space before {
  arm64: dts: hisilicon: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

Microchip ARM64 device tree updates for 6.6

It contains:
- one cleanup patch that removes whitespaces around '='

* tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  arm64: dts: microchip: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230804044132.231508-1-claudiu.beznea@tuxon.devSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 device tree updates for 6.6

It contains:
- TCB timer nodes adition for at91-sama5d3_ksz9477_evb board
- device tee cleanups

* tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: remove duplicated entries
  ARM: dts: microchip: split interrupts per cells
  ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
  ARM: dts: at91: ksz9477_evb: Add missing timer nodes
  ARM: dts: at91-vinco: Fix "status" values
  ARM: dts: microchip: add missing space before {
  ARM: dts: microchip: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.devSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Each interrupt should be in its own cell.  This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt

Renesas DTS updates for v6.6

  - Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC,
  - Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L
    SMARC EVK development boards,
  - Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs,
  - Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC,
  - Add LED support for the Spider development board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: spider-cpu: Add GP LEDs
  arm64: dts: renesas: r8a779f0: Add INTC-EX node
  arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
  arm64: dts: renesas: r9a07g043: Add MTU3a node
  ARM dts: renesas: armadillo800eva: Switch to enable-gpios
  arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC
  arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0
  riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node
  arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3
  arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3
  arm64: dts: renesas: Add missing space before {
  ARM: dts: renesas: Add missing space before {
  arm64: dts: renesas: Minor whitespace cleanup around '='
  arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
  arm64: dts: renesas: r9a09g011: Add CSI nodes
  arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos
  arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels

Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.6-rc1

The majority of this is fixes all over the place for DT schema
validation warnings. However, there are also cleanups for some things in
DT and audio support is added on IGX Orin. Jetson Orin NX and Nano also
gain a new thermal trip point to help keep the device cool at moderate
loads.

* tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (22 commits)
  arm64: tegra: Add blank lines for better readability
  arm64: tegra: Remove {clock,reset}-names from VIC powergate
  arm64: tegra: Drop incorrect maxim,disable-etr on Smaug
  arm64: tegra: Add SPI device tree nodes for Tegra234
  arm64: tegra: Enable UARTA and UARTE for Orin Nano
  arm64: tegra: Add UARTE device tree node on Tegra234
  arm64: tegra: Adapt to LP855X bindings changes
  arm64: tegra: Add PCIe and DP 3.3V supplies
  arm64: tegra: Add missing reset-names for Tegra HS UART
  arm64: tegra: Remove current-speed for SBSA UART
  arm64: tegra: smaug: Remove reg-shift for high-speed UART
  arm64: tegra: Remove dmas and dma-names for debug UART
  arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano
  arm64: tegra: Remove duplicate PCI nodes
  arm64: tegra: Sort PCI nodes correctly on Orin
  arm64: tegra: Add audio support for IGX Orin
  arm64: tegra: Update CPU OPP tables
  arm64: tegra: Fix HSUART for Smaug
  arm64: tegra: Fix HSUART for Jetson AGX Orin
  arm64: tegra: Add missing alias for NVIDIA IGX Orin
  ...

Link: https://lore.kernel.org/r/20230728094129.3587109-4-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

ARM: tegra: Device tree changes for v6.6-rc1

This contains various fixes for DT schema validation and the Pegatron
Chagall and Nexus 7 get specific compatible strings for the panels that
they use.

* tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Provide specific compatible string for Nexus 7 panel
  ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron Chagall
  ARM: tegra: Reuse I2C3 for NVEC
  ARM: tegra: Add missing reset-names for Tegra HS UART
  ARM: tegra: Remove reset-names for UART devices
  ARM: tegra: Remove dmas and dma-names for debug UART

Link: https://lore.kernel.org/r/20230728094129.3587109-3-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

dt-bindings: Changes for v6.6-rc1

A number of Tegra-specific bindings are converted to json-schema and the
reserved-memory and BPMP bindings get support for Tegra264.

* tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: firmware: Add support for tegra186-bpmp DRAM MRQ GSCs
  dt-bindings: reserved-memory: Add support for DRAM MRQ GSCs
  dt-bindings: thermal: tegra: Convert to json-schema
  dt-bindings: arm: tegra: nvec: Convert to json-schema
  dt-bindings: clock: tegra: Document Tegra132 compatible
  dt-bindings: cpu: Document NVIDIA Tegra186 CCPLEX cluster
  dt-bindings: serial: tegra-hsuart: Convert to json-schema
  dt-bindings: arm: tegra: ahb: Convert to json-schema
  dt-bindings: arm: tegra: flowctrl: Convert to json-schema

Link: https://lore.kernel.org/r/20230728094129.3587109-2-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

It's not a valid binding. Instead move the sdio_rst line to the power
sequence and use w_disable1 as the vmmc-supply bringing it more in line
with other SDIO M2 cards.

Resolves following warning:

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: mmc@30b50000: Unevaluated properties are not allowed ('power-supply' was unexpected)
        from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#Reported-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>