Wire up mbind and get/set_mempolicy() in their reserved places.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Some compilers don't support the explicit CPU tuning, while binutils
is still able to handle the special subtype-specific opcodes. Make
the CFLAG optional, falling back on the compiler default if nothing
better exists.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

We have to call in to sparse_memory_present_with_active_regions()
earlier in order for sparsemem to be happy. This was being called
too late, and was causing troubles with the platforms that needed
to enable sparsemem.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

If we have multiple nodes, register these at topology_init() time.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Handy for debugging bootmem troubles.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This implements basic sparsemem support for SH. Presently this only
uses static sparsemem, and we still permit explicit selection of
flatmem. Those boards that want sparsemem can select it as usual.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

pfn_valid() is already defined in the sparsemem case, so we only
need to define this for CONFIG_FLATMEM.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

.machvec.init can be misaligned with the recent machvec changes,
forcibly align it on the boundary that it expects, as before.
Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Now that select no longer works for selecting the "closest" CPU,
we have to explicitly reference the precise sub-type in the few
places where it actually matters (presently only setup code and
some legacy sh-sci cruft).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This kills off the BareCPU board as a "special" machvec, rather,
we leave this as a default for when no other vector is available,
or when we want to use it in combination with other vectors for
testing with generic ops. As sh_mv is copied out anyways (or
overloaded when an alternate vector is explicitly selected), this
doesn't consume any additional memory.

The generic machvec can be forcibly selected with sh_mv=generic,
or by not having any other boards enabled.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This tidies up the build rules and permits multiple boards to be
linked in to the same kernel. The earlier Kconfig work ensures that
the CPU configuration is consistent across the boards, as this is
the only thing that we can't do dynamically.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The command line wasn't being saved off properly after the machvec
changes went in, fix it up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This was a big mess, rework the logic a bit so that we constrain
to a particular subtype and figure out the board support based
on that. This makes building subtype specific kernels supporting
multiple boards possible again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This fixes up much of the machvec handling, allowing for it to be
overloaded on boot. Making practical use of this still requires
some Kconfig munging, however.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds in some more __user annotations. These weren't being
handled properly in some of the __get_user and __put_user paths,
so tidy those up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Split out the CPU topology initialization to a separate file,
and switch it to a percpu type, rather than an NR_CPUS array.

At the same time, switch to only registering present CPUs,
rather than using the possible CPU map.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This bug was caught by LTP testcase fchmod06 on Blackfin platform.

In the manpage of fchmod, "EPERM: The effective UID does not match the
owner of the file, and the process is not privileged (Linux: it does not
have the CAP_FOWNER capability)."

But the ramfs nommu code missed the inode_change_ok POSIX UID/GID
verification. This patch fixed this.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.linux-xtensa.org/kernel/xtensa-feed:
  Xtensa: use asm-generic/fcntl.h
  [XTENSA] Remove non-rt signal handling
  [XTENSA] Move common sections into bss sections
  [XTENSA] clean-up header files
  [XTENSA] Use generic 64-bit division
  [XTENSA] Remove multi-exported symbols from xtensa_ksyms.c
  [XTENSA] fix sources using deprecated assembler directive
  [XTENSA] Spelling fixes in arch/xtensa
  [XTENSA] fix bit operations in bitops.h

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix SBUS IRQ regression caused by PCI-E driver.
  [SPARC64]: Fix 2 bugs in PCI Sabre bus scanning.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  xfrm: Add security check before flushing SAD/SPD
  [NET_SCHED]: Fix filter double free
  [NET]: Avoid duplicate netlink notification when changing link state
  [UDP]: Revert 2-pass hashing changes.
  [AF_UNIX]: Fix stream recvmsg() race.
  [NETFILTER]: nf_conntrack_amanda: fix textsearch_prepare() error check
  [NETFILTER]: ip_tables: fix compat related crash
  [NETFILTER]: nf_conntrack: fix helper module unload races
  [RTNETLINK]: ifindex 0 does not exist
  [NETLINK]: Mark netlink policies const
  [TCP] tcp_probe: Attach printf attribute properly to printl().
  [TCP]: Use LIMIT_NETDEBUG in tcp_retransmit_timer().
  [NET]: Merge dst_discard_in and dst_discard_out.
  [RFKILL]: Make rfkill->name const
  [IPV4]: Restore old behaviour of default config values
  [IPV4]: Add default config support after inetdev_init
  [IPV4]: Convert IPv4 devconf to an array
  [IPV4]: Only panic if inetdev_init fails for loopback
  [TCP]: Honour sk_bound_dev_if in tcp_v4_send_ack
  [BNX2]: Update version and reldate.
  ...

This is a minor fix, but what is currently there is essentially wrong.
In do_page_fault, if the faulting address from user code happens to be
in kernel address space (int *p = (int*)-1; p = 0xbed;)  then the
do_page_fault handler will jump over the local_irq_enable with the

  goto bad_area_nosemaphore;

But the first line there sees this is user code and goes through the
process of sending a signal to send SIGSEGV to the user task. This whole
time interrupts are disabled and the task can not be preempted by a
higher priority task.

This patch always enables interrupts in the user path of the
bad_area_nosemaphore.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: fix pxa27x keyboard driver
  [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking
  [ARM] 4421/1: AT91: Value of _KEY fields.
  [ARM] Solve buggy smp_processor_id() usage
  [ARM] 4422/1: Fix default value handling in gpio_direction_output (PXA)
  [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending
  [ARM] 4418/1: AT91: Number of programmable clocks differs
  [ARM] 4392/2: Do not corrupt the SP register in compressed/head.S

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix warning by moving do_default_vi into CONFIG_CPU_MIPSR2_SRS
  [MIPS] Fix some minor typoes in arch/mips/Kconfig.
  [MIPS] Remove prototype for deleted function qemu_handle_int
  [MIPS] Fix some system calls with long long arguments
  [MIPS] Make dma_map_sg handle sg elements which are longer than one page
  [MIPS] Drop __ARCH_WANT_SYS_FADVISE64
  [MIPS] Fix VGA corruption on RM300C
  [MIPS] RM300: Fix MMIO problems by marking the PCI INT ACK region busy
  [MIPS] EMMA2RH: remove dead KGDB code
  [MIPS] Remove duplicate fpu enable hazard code.
  [MIPS] Atlas, Malta, SEAD: Remove scroll from interrupt handler.

In file included from /usr/src/linux-2.6-2/net/ipv4/ip_input.c:118:

  include2/asm/system.h:245: error: parse error before "__cmpxchg_32"
  include2/asm/system.h:245: error: parse error before '*' token
  include2/asm/system.h:245: warning: type defaults to `int' in declaration of `__cmpxchg_32'
  include2/asm/system.h:245: warning: function declaration isn't a prototype
  include2/asm/system.h:245: warning: data definition has no type or storage class
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We used to access the 64-bit IRQ IMAP and ICLR registers of bus
controllers 4-bytes in and as a 32-bit register word, since only the
low 32-bits were relevant.  This seemed like a good idea at the time.

But the PCI-E controller requires full 8-byte 64-bit access to
these registers, so we switched over to accessing them fully.

SBUS was not adjusted properly, which broke interrupts completely.
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are on hummingbird, bus runs at 66MHZ.

pbm->pci_bus should be setup with the result of pci_scan_one_pbm()
or else we deref NULL pointers in the error interrupt handlers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we check for permission before deleting entries from SAD and
SPD, (see security_xfrm_policy_delete() security_xfrm_state_delete())
However we are not checking for authorization when flushing the SPD and
the SAD completely. It was perhaps missed in the original security hooks
patch.

This patch adds a security check when flushing entries from the SAD and
SPD.  It runs the entire database and checks each entry for a denial.
If the process attempting the flush is unable to remove all of the
entries a denial is logged the the flush function returns an error
without removing anything.

This is particularly useful when a process may need to create or delete
its own xfrm entries used for things like labeled networking but that
same process should not be able to delete other entries or flush the
entire database.

Signed-off-by: Joy Latten<latten@austin.ibm.com>
Signed-off-by: Eric Paris <eparis@parisplace.org>
Signed-off-by: James Morris <jmorris@namei.org>

cbq and atm destroy their filters twice when destroying inner classes
during qdisc destruction.
Reported-and-tested-by: Strobl Anton <a.strobl@aws-it.at>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing the link state from userspace not affecting any other
flags. Two duplicate notification are being sent, once as action
in the NETDEV_UP/NETDEV_DOWN notification chain and a second time
when comparing old and new device flags after the change has been
completed. Although harmless, the duplicates should be avoided.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts changesets:

6aaf47fa
b7b5f487
de34ed91
fc038410

There are still some correctness issues recently
discovered which do not have a known fix that doesn't
involve doing a full hash table scan on port bind.

So revert for now.
Signed-off-by: David S. Miller <davem@davemloft.net>

A recv() on an AF_UNIX, SOCK_STREAM socket can race with a
send()+close() on the peer, causing recv() to return zero, even though
the sent data should be received.

This happens if the send() and the close() is performed between
skb_dequeue() and checking sk->sk_shutdown in unix_stream_recvmsg():

process A  skb_dequeue() returns NULL, there's no data in the socket queue
process B  new data is inserted onto the queue by unix_stream_sendmsg()
process B  sk->sk_shutdown is set to SHUTDOWN_MASK by unix_release_sock()
process A  sk->sk_shutdown is checked, unix_release_sock() returns zero

I'm surprised nobody noticed this, it's not hard to trigger.  Maybe
it's just (un)luck with the timing.

It's possible to work around this bug in userspace, by retrying the
recv() once in case of a zero return value.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value from textsearch_prepare() needs to be checked
by IS_ERR(). Because it returns error code as a pointer.

Cc: "Brian J. Murrell" <netfilter@interlinx.bc.ca>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

check_compat_entry_size_and_hooks iterates over the matches and calls
compat_check_calc_match, which loads the match and calculates the
compat offsets, but unlike the non-compat version, doesn't call
->checkentry yet. On error however it calls cleanup_matches, which in
turn calls ->destroy, which can result in crashes if the destroy
function (validly) expects to only get called after the checkentry
function.

Add a compat_release_match function that only drops the module reference
on error and rename compat_check_calc_match to compat_find_calc_match to
reflect the fact that it doesn't call the checkentry function.

Reported by Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a helper module is unloaded all conntracks refering to it have their
helper pointer NULLed out, leading to lots of races. In most places this
can be fixed by proper use of RCU (they do already check for != NULL,
but in a racy way), additionally nf_conntrack_expect_related needs to
bail out when no helper is present.

Also remove two paranoid BUG_ONs in nf_conntrack_proto_gre that are racy
and not worth fixing.
Signed-off-by: Patrick McHarrdy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ifindex == 0 does not exist and implies we should do a lookup by name if
one was given.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>