- 13 May, 2016 40 commits
-
-
Paul Burton authored
The mips_cps_boot_vpes function previously included code to retrieve pointers to the core & VPE boot configuration structs. These structures were used both by mips_cps_boot_vpes and by its mips_cps_core_entry callsite. In preparation for skipping the call to mips_cps_boot_vpes on some invocations of mips_cps_core_entry, pull the calculation of those pointers out into a separate function such that it can continue to be shared. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12337/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
In preparation for further modifications to mips_cps_core_entry, pull the L1 cache initialisation out into a separate function. This both makes the code in mips_cps_core_entry read more clearly, particularly when modifying it, and shortens it which will become important as code is added that needs to continue to fit within the reset vector. Signed-off-by:
-
Paul Burton authored
When bringing up a CPU, ensure that its local ID as provided by the GIC matches up with our calculation of it. This is vital, since if the condition doesn't hold then we won't have configured interrupts correctly for the VP. Signed-off-by:
-
Paul Burton authored
Provide a gic_read_local_vp_id() function to read the VCNUM field of the GICs local VP_IDENT register. This will be used by a further patch to check that the value reported by the GIC matches up with the kernels calculation. Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12334/Signed-off-by:
-
Paul Burton authored
The Linux CPU number doesn't necessarily match up with the ID used for a VP by hardware. Convert the CPU number to the HW ID using mips_cm_vp_id when writing to the VP(E)_OTHER_ADDR register in order to ensure that we correctly access registers for the VPs of secondary cores. This most notably affects systems using CM3, such as those based around I6400. Signed-off-by:
-
Paul Burton authored
Fix mips_cm_max_vp_width for UP kernels where it previously referenced smp_num_siblings, which is not declared for UP kernels. This led to build errors such as the following: drivers/built-in.o: In function `$L446': irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings' drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow On UP kernels simply return 1, leaving the reference to smp_num_siblings in place only for SMP kernels. Signed-off-by:
-
Paul Burton authored
Generate accessor functions for the GCR_BEV_BASE register introduced by CM3, for use by a later patch. Signed-off-by:
-
Markos Chandras authored
Add the new CM3 registers for controlling bringing up and powering down VPs on MIPSR6 cores. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
-
Markos Chandras authored
This is similar to commit 934c7923 ("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions"). The CACHE instruction has been redefined for MIPSr6 and it reduced its offset field to 8 bits. This leads to micro-assembler field overflow warnings when booting SMP MIPSr6 cores like the following one: Call Trace: [<ffffffff8010af88>] show_stack+0x68/0x88 [<ffffffff8056ddf0>] dump_stack+0x68/0x88 [<ffffffff801305bc>] warn_slowpath_common+0x8c/0xc8 [<ffffffff80130630>] warn_slowpath_fmt+0x38/0x48 [<ffffffff80125814>] build_insn+0x514/0x5c0 [<ffffffff806ee134>] cps_gen_cache_routine.isra.3+0xe0/0x1b8 [<ffffffff806ee570>] cps_pm_init+0x364/0x9ec [<ffffffff80100538>] do_one_initcall+0x90/0x1a8 [<ffffffff806e8c14>] kernel_init_freeable+0x160/0x21c [<ffffffff8056b6a0>] kernel_init+0x10/0xf8 [<ffffffff801059f8>] ret_from_kernel_thread+0x14/0x1c We fix this by incrementing the base register on every loop. Signed-off-by:
-
Markos Chandras authored
We shouldn't trust that the secondary cores will have a sane ebase register (either from the bootloader or during the hardware design phase) so use the ebase address as calculated by the boot CPU. Signed-off-by:
-
Paul Burton authored
MIPSr6 introduces support for "Virtual Processors", which are conceptually similar to VPEs from the now-deprecated MT ASE. Detect whether the system supports VPs using the VP bit in Config5, adding cpu_has_vp for use by later patches. Signed-off-by:
-
Antony Pavlov authored
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Links: * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50 * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63Signed-off-by:
Antony Pavlov <antonynpavlov@gmail.com> Cc: Daan Pape <daan@dptechnics.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12886/Signed-off-by:
-
Antony Pavlov authored
Please see https://www.dptechnics.com/contact for details. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Daan Pape <daan@dptechnics.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12885/Signed-off-by:
-
Antony Pavlov authored
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Please see https://onion.io/omega for details. Signed-off-by:
-
Antony Pavlov authored
Please see https://onion.io/contact for details. Signed-off-by:
-
Antony Pavlov authored
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.dragino.com/products/mother-board/item/71-ms14-p.html * https://wiki.openwrt.org/toh/dragino/ms14Signed-off-by: -
Antony Pavlov authored
Please see http://www.dragino.com/about/about.html for details. Signed-off-by:
-
Antony Pavlov authored
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.tp-link.com/en/products/details/?model=TL-MR3020 * http://wiki.openwrt.org/toh/tp-link/tl-mr3020 * https://wikidevi.com/wiki/TP-LINK_TL-MR3020Signed-off-by:
-
Antony Pavlov authored
Signed-off-by:
-
Antony Pavlov authored
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet). The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC), typically used in very cheap Access Points and Routers. Signed-off-by:
-
Antony Pavlov authored
For OF boards we have to skip platform initialization code so we can prove that OF code do all necessary initialization. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by:
Marek Vasut <marex@denx.de> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12877/ Patchwork: https://patchwork.linux-mips.org/patch/12920/Signed-off-by:
-
Antony Pavlov authored
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. E.g. you can set any clock rate value in board DTS but it will have no effect on the real clk calculation. This patch fixes some AR9132 devicetree clock support defects: * clk initialization function ath79_clocks_init_dt_ng() is introduced; it actually gets pll block base register address and reference clock from devicetree; * pll register parsing code is moved to the separate ar724x_clk_init() function; this function can be called from platform code or from devicetree code. Also mips_hpt_frequency value is set from dt, so the appropriate clock parameter is added to the cpu@0 devicetree node. The same approach can be used for adding AR9331 devicetree support. Signed-off-by: -
Antony Pavlov authored
The include/dt-bindings/clock/ath79-clk.h header file is introduced so we can use symbolic identifiers for SoC clocks. Signed-off-by:
-
Antony Pavlov authored
Here are some Sascha Hauer's arguments for using aliases in the dts files: - using aliases reduces the number of indentations in dts files; - dts files become independent of the layout of the dtsi files (it becomes possible to introduce another bus {} hierarchy between a toplevel bus and the devices when you have to); - less chances for typos. if &i2c2 does not exist you get an error. If instead you duplicate the whole path in the dts file a typo in the path will just create another node. Signed-off-by: -
Antony Pavlov authored
The TP-LINK TL-WR1043ND board has only one serial port, so replacing the default of 0 with 0 does nothing useful. Moreover, the correct name for aliases node is "aliases" not "alias". An overview of the "aliases" node usage can be found on the device tree usage page at devicetree.org [1]. Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2]. [1] http://devicetree.org/Device_Tree_Usage#aliases_Node [2] https://www.power.org/documentation/epapr-version-1-1/Signed-off-by:Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12872/Signed-off-by:
-
Hauke Mehrtens authored
Now it is possible to build in no device tree at all and depend on the boot loader providing one or someone concatenating a device tree to the end of the image. This was copied from arch/mips/bmips/Kconfig Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12899/Signed-off-by:
-
Hauke Mehrtens authored
This fetches the device tree file like it is specified in the MIPS UHI interface if one was found. This is also used when the device tree file was appended to the kernel image with cat. This code is copied from arch/mips/bmips/setup.c. Signed-off-by:
-
Aaro Koskinen authored
Add DTS for EdgeRouter Lite that is usable as is without any "pruning" with APPENDED_DTB. Compared to builtin generic DTB, we can avoid errors and delays from probing non-existent I2C devices. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
Add DTS for D-Link DSR-1000N that is usable as is without any "pruning" with APPENDED_DTB. Split out the common parts from octeon_3xxx.dts into octeon_3xxx.dtsi. Compared to builtin generic DTB, we can specificy fixed links properly and avoid probing non-existent I2C devices. Signed-off-by:
-
Aaro Koskinen authored
MIPS wants to sleep 5 seconds before panicking when panic_on_oops is set, with no apparent reason. Remove this feature, since some users may want their systems to fail as quickly as possible. Users who want to delay reboot after panic can use PANIC_TIMEOUT. Signed-off-by:
-
Rafał Miłecki authored
Broadcom ARM home routers store SPROM content in NVRAM just like MIPS ones. To share SPROM code we need to move it out of arch/mips/ to some common place. We already have bcm47xx_nvram in firmware path and SPROM should fit there as well. This driver is responsible for parsing SoC configuration data into a struct shared between ssb and bcma buses. This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0 (ARCH_BCM_5301X). Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12210/Signed-off-by:
-
Philipp Zabel authored
The reset_ops structure is never modified. Make it const. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Philipp Zabel authored
The reset_ops structure is never modified. Make it const. Signed-off-by:
-
Aaro Koskinen authored
Fill MAC addresses from bootinfo when using appended DTB. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12590/Signed-off-by:
-
Aaro Koskinen authored
Don't fill MAC address if it's already set. This allows DTB to override the bootinfo. Signed-off-by:
-
Aaro Koskinen authored
Use separate pass to fill MAC addresses. This is needed because we want to do this also for the appended DTB. Signed-off-by:
-
Aaro Koskinen authored
Use model string from DTB for board type if the board is unknown. This is more informative, e.g. with EdgeRouter Pro the /proc/cpuinfo will display "ubnt,e200 (CN6120p1.1-1000-NSP)" instead of misleading "Unsupported Board". Signed-off-by:
-
Aaro Koskinen authored
Initialize system type string after device tree init. Signed-off-by:
-
Aaro Koskinen authored
Return NULL for unsupported board. Signed-off-by:
-
David Daney authored
Use the trigger type passed in to the function instead of reading it back out of the irq_data. Signed-off-by:
-
