replace the spaces with the tabs at the start of line
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PHY registers are now being controlled from the connected phydev,
so there shouldn't be any reason for the et131x code to perform any
extra setup. Removing the interrupt setup code, and register defines
that are now unused.

On testing, no changes in behaviour were experienced.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a previous refactoring excerise, two NULL pointer assingments
were moved to their respective pointer declarations. Dan Carpenter
correctly points out that these assignments are not needed.
Removing them.

Also two small whitespace changes - rejoining split lines, as they are
now less than 80 chars.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

-Added some extra items to the TODO list.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In nic_rx_pkts() some large chunks of code are indented in 'if (len)'
sections. Refactor the code to remove these indents and re-join longer
split lines.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several places in et131x.c code is duplicated for fbr[0] and fbr[1].
Remove the duplicate lines and use loops to run over both indicies.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No dependency on plat headers, so only needs Kconfig update to
build for ARCH_MULTIPLATFORM.
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove usage of plat/cpu.h and get information from platform data
instead.  This enables omapdrm to be built with ARCH_MULTIPLATFORM.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Not actually used anymore.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Casting value returned by k[cmz]alloc to (struct page * *) is useless.

Generated by: scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For hardware that does not have DMM/TILER, there is no rotation,
so no point in getting userspace's hopes up.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change comedi drivers for PCI boards to use the new `auto_attach()`
method instead of the `attach_pci()` method.  I plan to remove the
`attach_pci()` and `attach_usb()` methods from `struct comedi_driver`
once nothing is using them.

Tag the functions with `__devinit` where they are not already so tagged,
as they are only called during PCI probe.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the usbdux, usbduxfast and usbduxsigma drivers to use the new
`auto_attach()` method instead of the `attach_usb()` method.  I plan to
remove the `attach_usb()` and `attach_pci()` methods from `struct
comedi_driver` once nothing is using them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The eeprom 'type' can be found from the boardinfo when needed.
Finding it when needed also makes it clearer what this value is.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch.pl issues:

ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: line over 80 characters

This file is now checkpatch.pl clean.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the whitespace in the defines. This also fixes a couple
checkpatch.pl issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the driver description comment to use the preferred block
comment style.

The second driver comment block contains the same information as
the first one. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace by renaming this CamelCase function to
addi_eeprom_read_info().

Remove the 'type' parameter. This parameter is a char pointer to the
string name of the eeprom type used on the board. This can be found
when needed using the dev pointer.

Change the parameter order so that the comedi_device pointer is passed
first.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use this function to set the private data instead of doing it in the
i_EepromReadMainHeader() function. Keep the eeprom read code #if 0'ed
out for now.

Add namespace by renaming this CamelCase function to
addi_eeprom_read_timer_info().

Remove the unused str_TimerMainHeader and str_TimerDetails structs.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace by renaming this CamelCase function to
addi_eeprom_read_ai_info().

Refactor the function so that it stores the data from the eeprom directly
in the private data instead of using the a struct to pass the data back
to i_EepromReadMainHeader(). This allows removing the str_AnalogInputHeader
struct.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace by renaming this CamelCase function to
addi_eeprom_read_ao_info().

Refactor the function so that it stores the data from the eeprom directly
in the private data instead of using the a struct to pass the data back
to i_EepromReadMainHeader(). This allows removing the str_AnalogOutputHeader
struct.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace by renaming this CamelCase function to
addi_eeprom_read_do_info().

Refactor the function so that it stores the data from the eeprom directly
in the private data instead of using the a struct to pass the data back
to i_EepromReadMainHeader(). This allows removing the str_DigitalOutputHeader
struct.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace by renaming this CamelCase function to
addi_eeprom_read_di_info().

Refactor the function so that it stores the data from the eeprom directly
in the private data instead of using the a struct to pass the data back
to i_EepromReadMainHeader(). This allows removing the str_DigitalInputHeader
struct.

Leave the reads of the unused eeprom data for now.

The return value is always 0 and it's never checked. Change it to void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Consolidate the two loops used to read the main header data and the
individual function header data from the eeprom.

The structs used to read the main header are not used outside this
function so remove them by reading the eeprom data into local
variables used in the loop.

Consolidate the 'timer' function cases.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the addi_eeprom_readw() calls have the offset to the start of user
data (0x100) as part of the address calculation. Create a define for this
constant and move it's addition to the address into addi_eeprom_readw().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the function by renaming the CamelCase function to
addi_eeprom_readw().

Rename the CamelCase parameters and local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the AMCC_OP_REG_* register offset defines for the magic numbers
used to read the nvram data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor the code that reads the word from the nvram out of the
w_EepromReadWord() function.

Cleanup the factored out code so it's a bit more concise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the function by renaming the CamelCase function to
addi_eeprom_nvram_wait().

Rename the CamelCase local variable.

Refactor the do {} while to make the code a bit more concise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the function by renaming the CamelCase function to
addi_eeprom_read_93c76().

Change the return type of the function to unsigned short and just
return the read value instead of passing it through a pointer.

Rename the CamelCase parameters and local variables.

Make addi_eeprom_cmd_93c76() return the last value so it does not
need to be calculated.

Rename the EE_READ and EE76_CMD_LEN defines so they have namespace
associated with the other 93c76 defines.

Cleanup the loop that reads the eeprom bits so it's a bit more concise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the function by renaming the CamelCase function to
addi_eeprom_cmd_93c76().

Rename the CamelCase parameters and local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the function by renaming the CamelCase function to
addi_eeprom_clk_93c76().

Rename the CamelCase parameter, dw_RegisterValue, to simply 'val'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Define the magic values used for the clock, chip-select, data out,
and data in signals to the 93c76 eeprom.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is the pointer to the string name of the eeprom type
found on the board. This name comes from the boardinfo of the
driver.

For aesthetic reasons, rename it to simply 'type'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is actually the PCI bar 0 i/o address of the device found
with pci_resource_start().

For aesthetic reasons, rename it to 'iobase' and change to type to an
unsigned long.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the functions in this file are exported. Make them static and
remove the unnecessary forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions used to read the eeprom header information blocks are
only used in this file. Move them to remove the need for the forward
declarations.

The i_EepromReadTimerHeader() function is currently not being used.
Block it out with and #if 0/#endif until it's determined if it should
be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions used to read the 93c76 eeprom are only used in this file.
Move them to remove the need for the forward declarations.

Also, remove some of the more obvious comments and fix a couple coding
style issues while moving the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only used in this file. Move it to remove the need
for the forward declaration.

Also, remove the comment about an error in the data book. It's not
really an error just someones misunderstanding about doing a byte
read of a dword register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the extra whitespace and the comment cruft in this file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>