In preparation for converting SMP to use l2cap_chan it's useful to add a
few more callback helpers so that smp.c won't need to define all of its
own.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

As preparation for moving SMP to use l2cap_chan infrastructure we need
to move the (de)initialization functions to smp.c (where they'll
eventually need access to the local L2CAP channel callbacks).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

First of all, it's wasteful to initialize SMP if it's never going to be
used (e.g. on non-LE controllers). Second of all, when we move to use
l2cap_chan we need to know the real local address, meaning we must have
completed at least part of the HCI init. This patch moves the SMP
initialization to after the HCI init procedure and makes it depend on
whether the controller actually supports LE.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

As preparation for converting SMP to use the l2cap_chan infrastructure
refactor the (de)initialization into separate functions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

If the AES crypto has not been initialized properly we should cleanly
return from the hci_find_irk_by_rpa() function. Right now this will not
happen in practice, but once (in subsequent patches) SMP init is moved
to after the HCI init procedure it is possible that the pointer is NULL.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

If the AES crypto context is not available we cannot generate new RPAs.
We should therefore cleanly return an error from the function
responsible for updating the random address.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The code is consistently using the HCI_CONN_LE_SMP_PEND flag check for
the existence of the SMP context, with the exception of this one place
in smp_sig_channel(). This patch converts the place to use the flag just
like all other instances.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

For most cases it makes no difference whether l2cap_le_conn_ready() is
called before or after calling the channel ready() callbacks, however
for upcoming SMP code we need this as the ready() callback initializes
certain structures that a call to smp_conn_security() from
l2cap_le_conn_ready() depends on. Therefore, move the call to
l2cap_le_conn_ready() after iterating through and notifying channels.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

L2CAP channel implementations may want to still access the chan->conn
pointer. This will particularly be the case for SMP that will want to
clear a reference to the SMP channel in the l2cap_conn structure. The
only user of the teardown callback so far is l2cap_sock.c and for the
code there it makes no difference whether the callback is called before
or after clearing the chan->conn pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The l2cap_add_scid function is used for registering a fixed L2CAP
channel. Instead of having separate initialization of the channel type
and outgoing MTU in l2cap_sock.c it's more intuitive to do these things
in the l2cap_add_scid function itself (and thereby make the
functionality available to other users besides l2cap_sock.c).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Now that we've got the fixed channel infrastructure cleaned up in a
generic way there's no longer a need to have a dedicated function for
handling data on the ATT channel. Instead the generic
l2cap_data_channel() handler will be able to do the exact same thing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When notifying global fixed channels of new connections it doesn't make
sense to consider channels meant for a different link type than the one
available. This patch adds an extra parameter to the
l2cap_global_fixed_chan() lookup function and ensures that only channels
matching the current hci_conn type are looked up.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

In order to remove special handling of fixed L2CAP channels we need to
start creating them in a single place instead of having per-channel
exceptions. The most natural place is the l2cap_conn_cfm() function
which is called whenever there is a new baseband link.

The only really special case so far has been the ATT socket, so in order
not to break the code in between this patch removes the ATT special
handling at the same time as it adds the generic fixed channel handling
from l2cap_le_conn_ready() into the hci_conn_cfm() function. As a
related change the channel locking in l2cap_conn_ready() becomes simpler
and we can thereby move the smp_conn_security() call into the
l2cap_le_conn_ready() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch is a simple refactoring of l2cap_connect_cfm to allow easier
extension of the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

With the update to sk->resume() and __l2cap_no_conn_pending() we
no-longer need to have special handling of ATT channels in the
l2cap_security_cfm() function. The chan->sec_level update when
encryption has been enabled is safe to do for any kind of channel, and
the loop takes later care of calling chan->ready() or chan->resume() if
necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The LE ATT socket uses a special trick where it temporarily sets
BT_CONFIG state for the duration of a security level elevation. In order
to not require special hacks for going back to BT_CONNECTED state in the
l2cap_core.c code the most reasonable place to resume the state is the
resume callback. This patch adds a new flag to track the pending
security level change and ensures that the state is set back to
BT_CONNECTED in the resume callback in case the flag is set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The __l2cap_no_conn_pending() function would previously only return a
meaningful value for connection oriented channels and was therefore not
useful for anything else. As preparation of making the L2CAP code more
generic allow the function to be called for other channel types as well
by returning a meaningful value for them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When looking up entries from the global L2CAP channel list there needs
to be a guarantee that other code doesn't go and remove the entry after
a channel has been returned by the lookup function. This patch makes
sure that the channel reference is incremented before the read lock is
released in the global channel lookup functions. The patch also adds the
corresponding l2cap_chan_put() calls once the channels pointers are
no-longer needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The new_connection L2CAP channel callback creates a new channel based on
the provided parent channel. The 6lowpan code was confusingly naming the
child channel "pchan" and the parent channel "chan". This patch swaps
the names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

In the smp_cmd_sign_info() function the SMP_DIST_SIGN bit is explicitly
cleared early on in the function. This means that there's no need to
check for it again before calling smp_distribute_keys().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When we're not connectable and all whitelisted (BR/EDR) devices are
connected it doesn't make sense to keep page scan enabled. This patch
adds code to check for any disconnected whitelist devices and if there
are none take the appropriate action in the hci_update_page_scan()
function to disable page scan.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Similar to our hci_update_background_scan() function we can simplify a
lot of code by creating a unified helper function for doing page scan
updates. This patch adds such a function to hci_core.c and updates all
the relevant places to use it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

There are several situations where we're interested in knowing whether
we're currently in the process of powering off an adapter. This patch
adds a convenience function for the purpose and makes it public since
we'll soon need to access it from hci_event.c as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Pull networking fixes from David Miller:
 "Several networking final fixes and tidies for the merge window:

   1) Changes during the merge window unintentionally took away the
      ability to build bluetooth modular, fix from Geert Uytterhoeven.

   2) Several phy_node reference count bug fixes from Uwe Kleine-König.

   3) Fix ucc_geth build failures, also from Uwe Kleine-König.

   4) Fix klog false positivies when netlink messages go to network
      taps, by properly resetting the network header.  Fix from Daniel
      Borkmann.

   5) Sizing estimate of VF netlink messages is too small, from Jiri
      Benc.

   6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian.

   7) VLAN untagging is erroneously dependent upon whether the VLAN
      module is loaded or not, but there are generic dependencies that
      matter wrt what can be expected as the SKB enters the stack.
      Make the basic untagging generic code, and do it unconditionally.
      From Vlad Yasevich.

   8) xen-netfront only has so many slots in it's transmit queue so
      linearize packets that have too many frags.  From Zoltan Kiss.

   9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian
      Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits)
  net: bcmgenet: correctly resume adapter from Wake-on-LAN
  net: bcmgenet: update UMAC_CMD only when link is detected
  net: bcmgenet: correctly suspend and resume PHY device
  net: bcmgenet: request and enable main clock earlier
  net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call
  xen-netfront: Fix handling packets on compound pages with skb_linearize
  net: fec: Support phys probed from devicetree and fixed-link
  smsc: replace WARN_ON() with WARN_ON_SMP()
  xen-netback: Don't deschedule NAPI when carrier off
  net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile
  wan: wanxl: Remove typedefs from struct names
  m68k/atari: EtherNEC - ethernet support (ne)
  net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call
  hdlc: Remove typedefs from struct names
  airo_cs: Remove typedef local_info_t
  atmel: Remove typedef atmel_priv_ioctl
  com20020_cs: Remove typedef com20020_dev_t
  ethernet: amd: Remove typedef local_info_t
  net: Always untag vlan-tagged traffic on input.
  drivers: net: Add APM X-Gene SoC ethernet driver support.
  ...

Pull Sparc fixes from David Miller:
 "Sparc bug fixes, one of which was preventing successful SMP boots with
  mainline"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix pcr_ops initialization and usage bugs.
  sparc64: Do not disable interrupts in nmi_cpu_busy()
  sparc: Hook up seccomp and getrandom system calls.
  sparc: fix decimal printf format specifiers prefixed with 0x

Pull x86/apic updates from Thomas Gleixner:
 "This is a major overhaul to the x86 apic subsystem consisting of the
  following parts:

   - Remove obsolete APIC driver abstractions (David Rientjes)

   - Use the irqdomain facilities to dynamically allocate IRQs for
     IOAPICs.  This is a prerequisite to enable IOAPIC hotplug support,
     and it also frees up wasted vectors (Jiang Liu)

   - Misc fixlets.

  Despite the hickup in Ingos previous pull request - caused by the
  missing fixup for the suspend/resume issue reported by Borislav - I
  strongly recommend that this update finds its way into 3.17.  Some
  history for you:

  This is preparatory work for physical IOAPIC hotplug.  The first
  attempt to support this was done by Yinghai and I shot it down because
  it just added another layer of obscurity and complexity to the already
  existing mess without tackling the underlying shortcomings of the
  current implementation.

  After quite some on- and offlist discussions, I requested that the
  design of this functionality must use generic infrastructure, i.e.
  irq domains, which provide all the mechanisms to dynamically map linux
  interrupt numbers to physical interrupts.

  Jiang picked up the idea and did a great job of consolidating the
  existing interfaces to manage the x86 (IOAPIC) interrupt system by
  utilizing irq domains.

  The testing in tip, Linux-next and inside of Intel on various machines
  did not unearth any oddities until Borislav exposed it to one of his
  oddball machines.  The issue was resolved quickly, but unfortunately
  the fix fell through the cracks and did not hit the tip tree before
  Ingo sent the pull request.  Not entirely Ingos fault, I also assumed
  that the fix was already merged when Ingo asked me whether he could
  send it.

  Nevertheless this work has a proper design, has undergone several
  rounds of review and the final fallout after applying it to tip and
  integrating it into Linux-next has been more than moderate.  It's the
  ground work not only for IOAPIC hotplug, it will also allow us to move
  the lowlevel vector allocation into the irqdomain hierarchy, which
  will benefit other architectures as well.  Patches are posted already,
  but they are on hold for two weeks, see below.

  I really appreciate the competence and responsiveness Jiang has shown
  in course of this endavour.  So I'm sure that any fallout of this will
  be addressed in a timely manner.

  FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
  duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
  will have a look at the hopefully zero fallout until I'm back"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
  x86/apic/vsmp: Make is_vsmp_box() static
  x86, apic: Remove enable_apic_mode callback
  x86, apic: Remove setup_portio_remap callback
  x86, apic: Remove multi_timer_check callback
  x86, apic: Replace noop_check_apicid_used
  x86, apic: Remove check_apicid_present callback
  x86, apic: Remove mps_oem_check callback
  x86, apic: Remove smp_callin_clear_local_apic callback
  x86, apic: Replace trampoline physical addresses with defaults
  x86, apic: Remove x86_32_numa_cpu_node callback
  x86: intel-mid: Use the new io_apic interfaces
  x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
  x86, irq: Clean up irqdomain transition code
  x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
  x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
  x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
  x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
  x86, irq: Introduce helper functions to release IOAPIC pin
  x86, irq: Simplify the way to handle ISA IRQ
  ...

Pull x86/efix fixes from Peter Anvin:
 "Two EFI-related Kconfig changes, which happen to touch immediately
  adjacent lines in Kconfig and thus collapse to a single patch"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
  x86/efi: Fix 3DNow optimization build failure in EFI stub

Pull x86/xsave changes from Peter Anvin:
 "This is a patchset to support the XSAVES instruction required to
  support context switch of supervisor-only features in upcoming
  silicon.

  This patchset missed the 3.16 merge window, which is why it is based
  on 3.15-rc7"

* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, xsave: Add forgotten inline annotation
  x86/xsaves: Clean up code in xstate offsets computation in xsave area
  x86/xsave: Make it clear that the XSAVE macros use (%edi)/(%rdi)
  Define kernel API to get address of each state in xsave area
  x86/xsaves: Enable xsaves/xrstors
  x86/xsaves: Call booting time xsaves and xrstors in setup_init_fpu_buf
  x86/xsaves: Save xstate to task's xsave area in __save_fpu during booting time
  x86/xsaves: Add xsaves and xrstors support for booting time
  x86/xsaves: Clear reserved bits in xsave header
  x86/xsaves: Use xsave/xrstor for saving and restoring user space context
  x86/xsaves: Use xsaves/xrstors for context switch
  x86/xsaves: Use xsaves/xrstors to save and restore xsave area
  x86/xsaves: Define a macro for handling xsave/xrstor instruction fault
  x86/xsaves: Define macros for xsave instructions
  x86/xsaves: Change compacted format xsave area header
  x86/alternative: Add alternative_input_2 to support alternative with two features and input
  x86/xsaves: Add a kernel parameter noxsaves to disable xsaves/xrstors

Pull metag architecture updates from James Hogan:
 "Just a couple of minor static analysis fixes, removal of a NULL check
  that should never happen, and fix an error check where an unsigned
  value was being checked to see if it was negative"

* tag 'metag-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: cachepart: Fix failure check
  metag: hugetlbpage: Remove null pointer checks that could never happen

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for a bug in nfs3_list_one_acl()
   - speed up NFS path walks by supporting LOOKUP_RCU
   - more read/write code cleanups
   - pNFS fixes for layout return on close
   - fixes for the RCU handling in the rpcsec_gss code
   - more NFS/RDMA fixes"

* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  nfs: reject changes to resvport and sharecache during remount
  NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
  SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
  NFS: fix two problems in lookup_revalidate in RCU-walk
  NFS: allow lockless access to access_cache
  NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
  NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
  NFS: support RCU_WALK in nfs_permission()
  sunrpc/auth: allow lockless (rcu) lookup of credential cache.
  NFS: prepare for RCU-walk support but pushing tests later in code.
  NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
  NFS: add checks for returned value of try_module_get()
  nfs: clear_request_commit while holding i_lock
  pnfs: add pnfs_put_lseg_async
  pnfs: find swapped pages on pnfs commit lists too
  nfs: fix comment and add warn_on for PG_INODE_REF
  nfs: check wait_on_bit_lock err in page_group_lock
  sunrpc: remove "ec" argument from encrypt_v2 operation
  sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
  sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
  ...

Pull xfs update from Dave Chinner:
 "This update contains:
   - conversion of the XFS core to pass negative error numbers
   - restructing of core XFS code that is shared with userspace to
     fs/xfs/libxfs
   - introduction of sysfs interface for XFS
   - bulkstat refactoring
   - demand driven speculative preallocation removal
   - XFS now always requires 64 bit sectors to be configured
   - metadata verifier changes to ensure CRCs are calculated during log
     recovery
   - various minor code cleanups
   - miscellaneous bug fixes

  The diffstat is kind of noisy because of the restructuring of the code
  to make kernel/userspace code sharing simpler, along with the XFS wide
  change to use the standard negative error return convention (at last!)"

* tag 'xfs-for-linus-3.17-rc1' of git://oss.sgi.com/xfs/xfs: (45 commits)
  xfs: fix coccinelle warnings
  xfs: flush both inodes in xfs_swap_extents
  xfs: fix swapext ilock deadlock
  xfs: kill xfs_vnode.h
  xfs: kill VN_MAPPED
  xfs: kill VN_CACHED
  xfs: kill VN_DIRTY()
  xfs: dquot recovery needs verifiers
  xfs: quotacheck leaves dquot buffers without verifiers
  xfs: ensure verifiers are attached to recovered buffers
  xfs: catch buffers written without verifiers attached
  xfs: avoid false quotacheck after unclean shutdown
  xfs: fix rounding error of fiemap length parameter
  xfs: introduce xfs_bulkstat_ag_ichunk
  xfs: require 64-bit sector_t
  xfs: fix uflags detection at xfs_fs_rm_xquota
  xfs: remove XFS_IS_OQUOTA_ON macros
  xfs: tidy up xfs_set_inode32
  xfs: allow inode allocations in post-growfs disk space
  xfs: mark xfs_qm_quotacheck as static
  ...

Pull quota, reiserfs, UDF updates from Jan Kara:
 "Scalability improvements for quota, a few reiserfs fixes, and couple
  of misc cleanups (udf, ext2)"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: Fix use after free in journal teardown
  reiserfs: fix corruption introduced by balance_leaf refactor
  udf: avoid redundant memcpy when writing data in ICB
  fs/udf: re-use hex_asc_upper_{hi,lo} macros
  fs/quota: kernel-doc warning fixes
  udf: use linux/uaccess.h
  fs/ext2/super.c: Drop memory allocation cast
  quota: remove dqptr_sem
  quota: simplify remove_inode_dquot_ref()
  quota: avoid unnecessary dqget()/dqput() calls
  quota: protect Q_GETFMT by dqonoff_mutex

Pull Ceph updates from Sage Weil:
 "There is a lot of refactoring and hardening of the libceph and rbd
  code here from Ilya that fix various smaller bugs, and a few more
  important fixes with clone overlap.  The main fix is a critical change
  to the request_fn handling to not sleep that was exposed by the recent
  mutex changes (which will also go to the 3.16 stable series).

  Yan Zheng has several fixes in here for CephFS fixing ACL handling,
  time stamps, and request resends when the MDS restarts.

  Finally, there are a few cleanups from Himangi Saraogi based on
  Coccinelle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
  rbd: remove extra newlines from rbd_warn() messages
  rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC
  rbd: rework rbd_request_fn()
  ceph: fix kick_requests()
  ceph: fix append mode write
  ceph: fix sizeof(struct tYpO *) typo
  ceph: remove redundant memset(0)
  rbd: take snap_id into account when reading in parent info
  rbd: do not read in parent info before snap context
  rbd: update mapping size only on refresh
  rbd: harden rbd_dev_refresh() and callers a bit
  rbd: split rbd_dev_spec_update() into two functions
  rbd: remove unnecessary asserts in rbd_dev_image_probe()
  rbd: introduce rbd_dev_header_info()
  rbd: show the entire chain of parent images
  ceph: replace comma with a semicolon
  rbd: use rbd_segment_name_free() instead of kfree()
  ceph: check zero length in ceph_sync_read()
  ceph: reset r_resend_mds after receiving -ESTALE
  ...

Pull UBI/UBIFS changes from Artem Bityutskiy:
 "No significant changes, mostly small fixes here and there.  The more
  important fixes are:

   - UBI deleted list items while iterating the list with
     'list_for_each_entry'
   - The UBI block driver did not work properly with very large UBI
     volumes"

* tag 'upstream-3.17-rc1' of git://git.infradead.org/linux-ubifs: (21 commits)
  UBIFS: Add log overlap assertions
  Revert "UBIFS: add a log overlap assertion"
  UBI: bugfix in ubi_wl_flush()
  UBI: block: Avoid disk size integer overflow
  UBI: block: Set disk_capacity out of the mutex
  UBI: block: Make ubiblock_resize return something
  UBIFS: add a log overlap assertion
  UBIFS: remove unnecessary check
  UBIFS: remove mst_mutex
  UBIFS: kernel-doc warning fix
  UBI: init_volumes: Ignore volumes with no LEBs
  UBIFS: replace seq_printf by seq_puts
  UBIFS: replace count*size kzalloc by kcalloc
  UBIFS: kernel-doc warning fix
  UBIFS: fix error path in create_default_filesystem()
  UBIFS: fix spelling of "scanned"
  UBIFS: fix some comments
  UBIFS: remove useless @ecc in struct ubifs_scan_leb
  UBIFS: remove useless statements
  UBIFS: Add missing break statements in dbg_chk_pnode()
  ...

If do_journal_release() races with do_journal_end() which requeues
delayed works for transaction flushing, we can leave work items for
flushing outstanding transactions queued while freeing them. That
results in use after free and possible crash in run_timers_softirq().

Fix the problem by not requeueing works if superblock is being shut down
(MS_ACTIVE not set) and using cancel_delayed_work_sync() in
do_journal_release().

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>

Christopher reports that perf_event_print_debug() can crash in uniprocessor
builds.  The crash is due to pcr_ops being NULL.

This happens because pcr_arch_init() is only invoked by smp_cpus_done() which
only executes in SMP builds.

init_hw_perf_events() is closely intertwined with pcr_ops being setup properly,
therefore:

1) Call pcr_arch_init() early on from init_hw_perf_events(), instead of
   from smp_cpus_done().

2) Do not hook up a PMU type if pcr_ops is NULL after pcr_arch_init().

3) Move init_hw_perf_events to a later initcall so that it we will be
   sure to invoke pcr_arch_init() after all cpus are brought up.

Finally, guard the one naked sequence of pcr_ops dereferences in
__global_pmu_self() with an appropriate NULL check.
Reported-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

nmi_cpu_busy() is a SMP function call that just makes sure that all of the
cpus are spinning using cpu cycles while the NMI test runs.

It does not need to disable IRQs because we just care about NMIs executing
which will even with 'normal' IRQs disabled.

It is not legal to enable hard IRQs in a SMP cross call, in fact this bug
triggers the BUG check in irq_work_run_list():

	BUG_ON(!irqs_disabled());

Because now irq_work_run() is invoked from the tail of
generic_smp_call_function_single_interrupt().
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bcmgenet: Wake-on-LAN and suspend fixes

This patch series fixes some mistakes that were introduced during the driver
changes adding support suspend/resume and Wake-on-LAN.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case we configured the adapter to be a wake up source from
Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will
leave the adapter in MagicPacket matching mode, which prevents any other
type of packets from reaching the RX engine. Fix this by calling
bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter
configuration in bcmgenet_resume().

The second problem we had was an imbalanced clock disabling in
bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in
bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally
disabled the clock in bcmgenet_wol_resume().

Fixes: 8c90db72 ("net: bcmgenet: suspend and resume from Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we bring the interface down, phy_stop() will schedule the PHY state
machine to call our link adjustment callback. By the time we do so, we
may have clock gated off the GENET hardware block, and this will cause
bus errors to happen in bcmgenet_mii_setup():

Make sure that we only touch the UMAC_CMD register when there is an
actual link. This is safe to do for two reasons:

- updating the Ethernet MAC registers only make sense when a physical
  link is present
- the PHY library state machine first set phydev->link = 0 before
  invoking phydev->adjust_link in the PHY_HALTED case

Fixes: 24052408 ("net: bcmgenet: only update UMAC_CMD if something changed")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>