- 20 Oct, 2021 40 commits
-
-
Sean Wang authored
This is a preliminary patch to introduce mt7921s support. make dma.c be used dedicately for mt7921e. by moving out mt7921_tx_cleanup from dma.c to mcu.c and then renaming mt7921_tx_cleanup to refect the exact thing the function actually does. Finally, dma.c totally become pcie specific one, only needed to be compiled only when CONFIG_MT7921E is enabled. Tested-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
This is a preliminary patch to introduce mt7921s support. Split out a new pci_mac.c from mac.c to make mac.c reusable between mt7921s and mt7921e. Tested-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Add MU EDCA MCU command support to update MU AC parameter record field from the access point. Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Tested-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Remove some more not used code in mt7915 debugfs. Squash mt7915_puts_rate_txpower and mt7915_rate_txpower_show. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Export mt76s_alloc_rx_queue and mt76s_alloc_tx utility routines in order to allow mt7921s driver to configure a different main rx queue. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Improve xmit-queue debugfs node readability for mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce a dedicated mt76 debugfs sub-dir for ext-phy in dbdc mode. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
This is a preliminary patch to create a mt76 debugfs subir for ext-phy. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
Set muru platform type by mcu cmd to notify fw to init corresponding algorithm. Suggested-by: Money Wang <money.wang@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
The VTA (Valid for Txd Arrival time) bit should be set in tx descriptor, which is necessary for WM fw to schedule SPL (station priority list) normally before generating txcmd. If it's not set, some unexpected wcids may be involved in SPL. Suggested-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
For broadcast/multicast wcid, the muar_idx should be 0xe. Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
Rework starec tags to the order which firmware expected. This also fixes some weird behaviors during generating SPL of HE-MU. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
Fix tag len error for sta_rec_wtbl, which causes fw parsing error for the tags placed behind it. Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
1. Drop unnecessary MT_EBF/MT_IBF enum. 2. Rename fields 'nc'/'nr' to 'ncol'/'nrow'. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
With this patch we can append txbf starec TLVs. This is an intermediate patch to improve HE MUMIMO performances. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Beacon elements might be changed by hostapd configuraion, so driver should compare both IEs and PHY capabilities to get the least common denominator before association. Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Fix the following NULL pointer dereference in mt76_connac_get_phy_mode_v2 routine triggered on mt7663s device when sta is NULL [ 5.490700] mt7663s mmc0:0001:1: N9 Firmware Version: 3.1.1, Build Time: 20200604161656 [ 5.490815] mt7663s mmc0:0001:1: Region number: 0x4 [ 5.490868] mt7663s mmc0:0001:1: Parsing tailer Region: 0 [ 5.496251] mt7663s mmc0:0001:1: Region 0, override_addr = 0x00118000 [ 5.496419] mt7663s mmc0:0001:1: Parsing tailer Region: 1 [ 5.624027] mt7663s mmc0:0001:1: Parsing tailer Region: 2 [ 5.656999] mt7663s mmc0:0001:1: Parsing tailer Region: 3 [ 5.671876] mt7663s mmc0:0001:1: override_addr = 0x00118000, option = 3 [ 9.358658] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9.358775] #PF: supervisor read access in kernel mode [ 9.358831] #PF: error_code(0x0000) - not-present page [ 9.358886] PGD 0 P4D 0 [ 9.358917] Oops: 0000 [#1] SMP [ 9.358960] CPU: 0 PID: 235 Comm: NetworkManager Not tainted 5.15.0-rc4-kvm-02151-g39e333d657f4-dirty #769 [ 9.359057] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 [ 9.359150] RIP: 0010:mt76_connac_get_phy_mode_v2+0xc9/0x11c [ 9.359473] RAX: 0000000000000013 RBX: 0000000000000000 RCX: 0000000000000027 [ 9.359546] RDX: ffff8881f9c17358 RSI: 0000000000000001 RDI: ffff8881f9c17350 [ 9.359624] RBP: ffff88810bac1ed4 R08: ffffffff822a4a48 R09: 0000000000000003 [ 9.359697] R10: ffffffff82234a60 R11: ffffffff82234a60 R12: ffff88810bac1eec [ 9.359779] R13: 0000000000000000 R14: ffff88810bad1648 R15: ffff88810bac1eb8 [ 9.359859] FS: 00007f5f1e45bbc0(0000) GS:ffff8881f9c00000(0000) knlGS:0000000000000000 [ 9.359939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.360003] CR2: 0000000000000000 CR3: 0000000105d5d000 CR4: 00000000000006b0 [ 9.360083] Call Trace: [ 9.360116] mt76_connac_mcu_uni_add_bss.cold+0x21/0x250 [ 9.360175] ? schedule_preempt_disabled+0xa/0x10 [ 9.360232] ? __mutex_lock.constprop.0+0x2ab/0x460 [ 9.360286] mt7615_remove_interface+0x63/0x1d0 [ 9.360342] drv_remove_interface+0x32/0xe0 [ 9.360385] ieee80211_do_stop+0x5da/0x800 [ 9.360428] ? dev_reset_queue+0x30/0x90 [ 9.360472] ieee80211_stop+0x3b/0xb0 [ 9.360516] __dev_close_many+0x7a/0xd0 [ 9.360559] __dev_change_flags+0xd6/0x1f0 [ 9.360604] dev_change_flags+0x21/0x60 [ 9.360648] do_setlink+0x259/0xfb0 [ 9.360686] ? __nla_validate_parse+0x51/0xb80 [ 9.360742] __rtnl_newlink+0x5b3/0x960 [ 9.360785] ? inet6_fill_ifla6_attrs+0x41d/0x470 [ 9.360841] ? __kmalloc_track_caller+0x57/0x3c0 [ 9.360905] ? netlink_trim+0x8a/0xb0 [ 9.360949] ? skb_queue_tail+0x1b/0x50 Fixes: 67aa2743 ("mt76: mt7921: rely on mt76_connac_mcu common library") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Avoids false positive on detecting frags or encrypted mgmt frames Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Xing Song authored
When received frame is decryped by hardware, CCMP PN is checked by mt76. When management frame protection (IEEE 802.11w) is used, we must use a separate counter for tracking received CCMP packet number for the management frames. The previously used counter was shared with data frames and that can cause problems in detecting replays incorrectly for robust management frames. Add a new counter just for robust management frames to avoid this issue. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Deren Wu authored
Add a delay parameter for firmware to support delay scheduled scan. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
[ 103.451600] CPU 3 Unable to handle kernel paging request at virtual address 00000003, epc == 8576591c, ra == 857659f0 [ 103.462226] Oops[#1]: [ 103.464499] CPU: 3 PID: 9247 Comm: ifconfig Tainted: G W 5.4.143 #0 [ 103.472031] $ 0 : 00000000 00000001 83be3854 00000000 [ 103.477239] $ 4 : 8102a374 8102a374 8102f0b0 00000200 [ 103.482444] $ 8 : 0000002d 000001e4 64373765 5d206337 [ 103.487647] $12 : 00000000 00000005 00000000 0006d1df [ 103.492853] $16 : 83be3848 853838a8 8743d600 00010000 [ 103.498059] $20 : 00000000 00000000 8553dec0 0000007f [ 103.503266] $24 : 00000003 80382084 [ 103.508472] $28 : 831d4000 831d5bc0 00000001 857659f0 [ 103.513678] Hi : 00000122 [ 103.516543] Lo : d1768000 [ 103.519452] epc : 8576591c mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common] [ 103.526306] ra : 857659f0 mt7615_mcu_add_bss+0x1a4/0x3c0 [mt7615_common] [ 103.533232] Status: 11007c03 KERNEL EXL IE [ 103.537402] Cause : 40800008 (ExcCode 02) [ 103.541389] BadVA : 00000003 [ 103.544253] PrId : 0001992f (MIPS 1004Kc) [ 103.797086] Call Trace: [ 103.799562] [<8576591c>] mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common] [ 103.806082] [<85760a14>] mt7615_remove_interface+0x74/0x1e0 [mt7615_common] [ 103.813280] [<85603fcc>] drv_remove_interface+0x2c/0xa0 [mac80211] [ 103.819612] [<8561a8e4>] ieee80211_del_virtual_monitor.part.22+0x74/0xe8 [mac80211] [ 103.827410] [<8561b7f0>] ieee80211_do_stop+0x4a4/0x8a0 [mac80211] [ 103.833671] [<8561bc00>] ieee80211_stop+0x14/0x24 [mac80211] [ 103.839405] [<8045a328>] __dev_close_many+0x9c/0x10c [ 103.844364] [<80463de4>] __dev_change_flags+0x16c/0x1e4 [ 103.849569] [<80463e84>] dev_change_flags+0x28/0x70 [ 103.854440] [<80521e54>] devinet_ioctl+0x280/0x774 [ 103.859222] [<80526248>] inet_ioctl+0xa4/0x1c8 [ 103.863674] [<80436830>] sock_ioctl+0x2d8/0x4bc [ 103.868201] [<801adbb4>] do_vfs_ioctl+0xb8/0x7c0 [ 103.872804] [<801ae30c>] ksys_ioctl+0x50/0xb4 [ 103.877156] [<80014598>] syscall_common+0x34/0x58 Fixes: 04b8e659 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Improve {xmit,rx}-queue debugfs node readability Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce twt_stats knob in debugfs in order to dump established agreements Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Enable TWT support in AP mode Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce individual TWT support to mt7915 in AP mode. Implement the two following mac80211 callbacks: - add_twt_setup - twt_teardown_request Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
This is a preliminary patch to add TWT support to mt7915 Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce an unlocked verion of mt7915_get_tsf routine. This is a preliminary patch to add TWT support to mt7915. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Each firmware piece with mt7915 and mt7921 do not have the MCU header to reroute the packet to the internal RAM. So we do not need to consider the MCU header size in __mt76_mcu_send_firmware. Move the MCU header overhead calculation to mt76_mcu_send_firmware (for older chipsets) Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce __mt76_mcu_send_firmware routine to specify mcu message max length. This is a preliminary patch to support mt7921s driver. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Daniel Golle authored
EEPROM data for mt76 can be embedded into device-tree as an array. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Daniel Golle authored
Some platforms boot from SD card and don't come with calibration data stored anywhere on the board. As EEPROM data is rather small it can be embedded into the device tree to be loaded from there by the mt76. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Reduce MT_TX_STATUS_SKB_TIMEOUT to 250ms Tested-by: mrkiko.rs@gmail.com Co-developed-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Substitute sk_buff_head status_list with spinlock_t status_lock since we just need it for locking Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Remove mt76_wcid pointer from mt76_tx_status_check signature since it is always set to NULL Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce per-wcid idr to manage packet id for txs. This allow fast idr lookup and skb queueing at the same time. Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Unlock 6GHz band if supported by the device. Configure HE 6G capabilities. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce 6GHz channel list in mt76 module. This is a preliminary patch to unlock 6GHz band for mt7921 devices. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
This is a preliminary patch to enable 6GHz band for mt7921 devices. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
This is a preliminary patch to enable 6GHz band for mt7921 devices. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce sta_rec_he_6g_capa tlv in order configure the mcu with 6GHz capabilities. This is a preliminary patch to enable 6GHz band for mt7921 devices. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-