- 18 Nov, 2016 16 commits
-
-
Felipe Balbi authored
commit fd9afd3c upstream. According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
David Miller <davem@davemloft.net> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 18266403 upstream. The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bd ("cdc-acm: add TIOCMIWAIT") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Marc Dietrich authored
commit 68fae2f3 upstream. This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Fixes: e534f3e9 ("staging:nvec: Introduce the use of the managed version of kzalloc") Signed-off-by:
-
Paul Fertser authored
commit 17c1c9ba upstream. This reverts commit 36b30d61. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Acked-by:
-
Paul Fertser authored
commit d8f8a74d upstream. This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by:
-
Arnd Bergmann authored
commit 34eee70a upstream. The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Mika Westerberg authored
commit d2cdf5dc upstream. When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Reported-by:
Christian Steiner <christian.steiner@outlook.de> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mika Westerberg authored
commit 56211121 upstream. If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Signed-off-by:
-
Vineet Gupta authored
commit 922cc171 upstream. The current code doesn't even compile as somehow the inline assembly can't see the register names defined as ARC_RTC_* I'm pretty sure It worked when I first got it merged, but the tools were definitely different then. So better to write this in "C" anyways. Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Michael Holzheu authored
commit 237d6e68 upstream. Since commit d86bd1be ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 70d78fe7 upstream. It could be not possible to freeze coredumping task when it waits for 'core_state->startup' completion, because threads are frozen in get_signal() before they got a chance to complete 'core_state->startup'. Inability to freeze a task during suspend will cause suspend to fail. Also CRIU uses cgroup freezer during dump operation. So with an unfreezable task the CRIU dump will fail because it waits for a transition from 'FREEZING' to 'FROZEN' state which will never happen. Use freezer_do_not_count() to tell freezer to ignore coredumping task while it waits for core_state->startup completion. Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jann Horn authored
commit dd111be6 upstream. When root activates a swap partition whose header has the wrong endianness, nr_badpages elements of badpages are swabbed before nr_badpages has been checked, leading to a buffer overrun of up to 8GB. This normally is not a security issue because it can only be exploited by root (more specifically, a process with CAP_SYS_ADMIN or the ability to modify a swap file/partition), and such a process can already e.g. modify swapped-out memory of any other userspace process on the system. Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.netSigned-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Sean Young authored
commit ba13e98f upstream. When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by:
Sean Young <sean@mess.org> Tested-by:
-
murray foster authored
commit aa5f9209 upstream. Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by:
Murray Foster <mrafoster@gmail.com> Acked-by:
Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 027a9fe6 upstream. The ALSA proc handler allows currently the write in the unlimited size until kmalloc() fails. But basically the write is supposed to be only for small inputs, mostly for one line inputs, and we don't have to handle too large sizes at all. Since the kmalloc error results in the kernel warning, it's better to limit the size beforehand. This patch adds the limit of 16kB, which must be large enough for the currently existing code. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 6809cd68 upstream. Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Signed-off-by:
-
- 15 Nov, 2016 24 commits
-
-
Greg Kroah-Hartman authored
-
Sumit Saxena authored
commit 5e5ec175 upstream. This patch will fix regression caused by commit 1e793f6f ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fReported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Tested-by:
Tomas Henzl <thenzl@redhat.com> Tested-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alex Deucher authored
commit ff0bd441 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit c8213a63 upstream. When I fixed the dp rate selection in: 092c96a8 drm/radeon: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Ken Wang <Qingqing.Wang@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Tested-by:
Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by:
-
Alex Deucher authored
commit c47b9e09 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
-
Alex Deucher authored
commit 02d27234 upstream. When I fixed the dp rate selection in: 3b73b168cffd9c392584d3f665021fa2190f8612 drm/amdgpu: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
-
James Hogan authored
commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.17.x- [james.hogan@imgtec.com: Backport to 3.17..4.4] Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d450527a which was commit 91e4f1b6 upstream as it was incorrect. A fixed version will be forthcoming. Reported-by:
-
Stephen Rothwell authored
commit aaaab56d upstream. pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long ...) when comparing it. fixes these warnings: In file included from include/linux/list.h:8:0, from include/linux/kobject.h:20, from include/linux/of.h:21, from drivers/of/of_reserved_mem.c:17: drivers/of/of_reserved_mem.c: In function ‘__reserved_mem_alloc_size’: include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:9: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:21: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ Fixes: 1cc8e345 ("drivers: of: of_reserved_mem: fixup the alignment with CMA setup") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 104ba78c ] When transmitting on a packet socket with PACKET_VNET_HDR and PACKET_QDISC_BYPASS, validate device support for features requested in vnet_hdr. Drop TSO packets sent to devices that do not support TSO or have the feature disabled. Note that the latter currently do process those packets correctly, regardless of not advertising the feature. Because of SKB_GSO_DODGY, it is not sufficient to test device features with netif_needs_gso. Full validate_xmit_skb is needed. Switch to software checksum for non-TSO packets that request checksum offload if that device feature is unsupported or disabled. Note that similar to the TSO case, device drivers may perform checksum offload correctly even when not advertising it. When switching to software checksum, packets hit skb_checksum_help, which has two BUG_ON checksum not in linear segment. Packet sockets always allocate at least up to csum_start + csum_off + 2 as linear. Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c ethtool -K eth0 tso off tx on psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N ethtool -K eth0 tx off psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N v2: - add EXPORT_SYMBOL_GPL(validate_xmit_skb_list) Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit bf911e98 ] Andrey Konovalov reported that KASAN detected that SCTP was using a slab beyond the boundaries. It was caused because when handling out of the blue packets in function sctp_sf_ootb() it was checking the chunk len only after already processing the first chunk, validating only for the 2nd and subsequent ones. The fix is to just move the check upwards so it's also validated for the 1st chunk. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Jamal Hadi Salim authored
[ Upstream commit 9ee78374 ] Daniel says: While trying out [1][2], I noticed that tc monitor doesn't show the correct handle on delete: $ tc monitor qdisc clsact ffff: dev eno1 parent ffff:fff1 filter dev eno1 ingress protocol all pref 49152 bpf handle 0x2a [...] deleted filter dev eno1 ingress protocol all pref 49152 bpf handle 0xf3be0c80 some context to explain the above: The user identity of any tc filter is represented by a 32-bit identifier encoded in tcm->tcm_handle. Example 0x2a in the bpf filter above. A user wishing to delete, get or even modify a specific filter uses this handle to reference it. Every classifier is free to provide its own semantics for the 32 bit handle. Example: classifiers like u32 use schemes like 800:1:801 to describe the semantics of their filters represented as hash table, bucket and node ids etc. Classifiers also have internal per-filter representation which is different from this externally visible identity. Most classifiers set this internal representation to be a pointer address (which allows fast retrieval of said filters in their implementations). This internal representation is referenced with the "fh" variable in the kernel control code. When a user successfuly deletes a specific filter, by specifying the correct tcm->tcm_handle, an event is generated to user space which indicates which specific filter was deleted. Before this patch, the "fh" value was sent to user space as the identity. As an example what is shown in the sample bpf filter delete event above is 0xf3be0c80. This is infact a 32-bit truncation of 0xffff8807f3be0c80 which happens to be a 64-bit memory address of the internal filter representation (address of the corresponding filter's struct cls_bpf_prog); After this patch the appropriate user identifiable handle as encoded in the originating request tcm->tcm_handle is generated in the event. One of the cardinal rules of netlink rules is to be able to take an event (such as a delete in this case) and reflect it back to the kernel and successfully delete the filter. This patch achieves that. Note, this issue has existed since the original TC action infrastructure code patch back in 2004 as found in: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/ [1] http://patchwork.ozlabs.org/patch/682828/ [2] http://patchwork.ozlabs.org/patch/682829/ Fixes: 4e54c481 ("[NET]: Add tc extensions infrastructure.") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10df8e61 ] First bug was added in commit ad6f939a ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ac ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939a ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit a4b8e71b ] Most of getsockopt handlers in net/sctp/socket.c check len against sizeof some structure like: if (len < sizeof(int)) return -EINVAL; On the first look, the check seems to be correct. But since len is int and sizeof returns size_t, int gets promoted to unsigned size_t too. So the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is false. Fix this in sctp by explicitly checking len < 0 before any getsockopt handler is called. Note that sctp_getsockopt_events already handled the negative case. Since we added the < 0 check elsewhere, this one can be removed. If not checked, this is the result: UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19 shift exponent 52 is too large for 32-bit type 'int' CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3 ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270 0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422 Call Trace: [<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300 ... [<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90 [<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220 [<ffffffffb2819a30>] ? __kmalloc+0x330/0x540 [<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp] [<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp] [<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150 [<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270 Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by:
-
WANG Cong authored
[ Upstream commit 396a30cc ] This reverts commit a681574c ("ipv4: disable BH in set_ping_group_range()") because we never read ping_group_range in BH context (unlike local_port_range). Then, since we already have a lock for ping_group_range, those using ip_local_ports.lock for ping_group_range are clearly typos. We might consider to share a same lock for both ping_group_range and local_port_range w.r.t. space saving, but that should be for net-next. Fixes: a681574c ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918a ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a681574c ] In commit 4ee3bd4a ("ipv4: disable BH when changing ip local port range") Cong added BH protection in set_local_port_range() but missed that same fix was needed in set_ping_group_range() Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Signed-off-by:
Eric Salo <salo@google.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit fcd91dd4 ] Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 85dda4e5 ] The offload flag is a status flag and should not be used by FIB semantics for comparison. Fixes: 37ed9493 ("rtnetlink: add RTNH_F_EXTERNAL flag for fib offload") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 7cb3f921 ] Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103 ("bridge: Add multicast_snooping sysfs toggle") Reported-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9a0b1e8b ] After Jesper commit back in linux-3.18, we trigger a lockdep splat in proc_create_data() while allocating memory from pktgen_change_name(). This patch converts t->if_lock to a mutex, since it is now only used from control path, and adds proper locking to pktgen_change_name() 1) pktgen_thread_lock to protect the outer loop (iterating threads) 2) t->if_lock to protect the inner loop (iterating devices) Note that before Jesper patch, pktgen_change_name() was lacking proper protection, but lockdep was not able to detect the problem. Fixes: 8788370a ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()") Reported-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit a220445f ] The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4 ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by:
Francesco Santoro <francesco.santoro@6wind.com> Reported-by:
Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Vadim Fedorenko authored
[ Upstream commit 68d00f33 ] The commit ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by:
Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8ce48623 ] Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d35c99ff ] Since linux-3.15, netlink_dump() can use up to 16384 bytes skb allocations. Due to struct skb_shared_info ~320 bytes overhead, we end up using order-3 (on x86) page allocations, that might trigger direct reclaim and add stress. The intent was really to attempt a large allocation but immediately fallback to a smaller one (order-1 on x86) in case of memory stress. On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to meet the goal. Old kernels would need to remove __GFP_WAIT While we are at it, since we do an order-3 allocation, allow to use all the allocated bytes instead of 16384 to reduce syscalls during large dumps. iproute2 already uses 32KB recvmsg() buffer sizes. Alexei provided an initial patch downsizing to SKB_WITH_OVERHEAD(16384) Fixes: 9063e21f ("netlink: autosize skb lengthes") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Cc: Greg Thelen <gthelen@google.com> Reviewed-by:
Greg Rose <grose@lightfleet.com> Acked-by:
-
