oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon
SM4250 SoC.

Add support for the same in dt-bindings.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-4-iskren.chernev@gmail.com

Add the TCSR node which is needed for PCIe configuration.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024125843.25261-1-johan+linaro@kernel.org

Both a2015 devices use motor drivers controlled with PWM signal.
A5 additionally has a fixed regulator that powers the driver and is
controlled by enable signal. A3 routes that enable signal to the
motor driver itself.
To simplify the description, add the motor to the common dtsi and
assume a regulator is used for both.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
[Rename the nodes to be reusable in msm8916-sansung-e2015]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221020115255.2026-1-linmengbo0689@protonmail.com

The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".

We need to fix both the driver and dts to match.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-3-bryan.odonoghue@linaro.org

Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016161554.673006-4-luca@z3ntu.xyz

Add the nodes describing the iommu and its context banks that are found
on msm8953 SoCs.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016161554.673006-3-luca@z3ntu.xyz

Some devices have been using hsuart0 as an alias for the bluetooth UART,
rename this to serial1
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-4-kc@postmarketos.org

Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-3-kc@postmarketos.org

The 4-pin configuration for UART6 is used for all or almost all SDM845
devices with built in Bluetooth. Move the pinmux configuration to
sdm845.dtsi in preparation to be removed from individual devices in
future patches.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-2-kc@postmarketos.org

The bindings require a SoC-specific compatible to be used next to
qcom,cpufreq-epss. Add it to make dtbs_check happy.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016090035.565350-2-luca@z3ntu.xyz

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-3-krzysztof.kozlowski@linaro.org

There is no "normal" function, so use "gpio" for backlight button pin
configuration.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-2-krzysztof.kozlowski@linaro.org

Qualcomm pinctrl bindings and drivers expect gpio-ranges property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-1-krzysztof.kozlowski@linaro.org

This ufs_variant node seems to be a remnant from downstream devicetree.

As it doesn't seem to be used by anything upstream, remove it from the
dtsi.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221012215613.32054-1-luca@z3ntu.xyz

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.  All
nodes for GPIOs must also define the function property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-3-krzysztof.kozlowski@linaro.org

The I2C8 pins are split into i2c8_a (GPIO30 and GPIO31) and i2c8_b
(GPIO44 and GPIO52).  Correct the name of function for I2C8 pins.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-2-krzysztof.kozlowski@linaro.org

Configure UART1 and UART2 pins to respective functions in default state,
otherwise the pins might stay as GPIOs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-1-krzysztof.kozlowski@linaro.org

According to s3fwrn5 driver code the "enable" GPIO line is driven "high"
when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low"
when chip is in use.

s3fwrn5_phy_power_ctrl():

	...
	gpio_set_value(phy->gpio_en, 1);
	...
	if (mode != S3FWRN5_MODE_COLD) {
		msleep(S3FWRN5_EN_WAIT_TIME);
		gpio_set_value(phy->gpio_en, 0);
		msleep(S3FWRN5_EN_WAIT_TIME);
	}

Therefore the line described by "en-gpios" property should be annotated
as "active low".

The wakeup gpio appears to have correct polarity (active high).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929011557.4165216-2-dmitry.torokhov@gmail.com

Compatibles can come in two formats.  Either "vendor,ip-soc" or
"vendor,soc-ip".  Qualcomm bindings were mixing both of usages, so add a
DT schema file documenting preferred policy and enforcing it for all new
compatibles, except few existing patterns.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152501.490840-1-krzysztof.kozlowski@linaro.org

New slimbus DT schema expect only SLIMbus bus nodes to be named
"slimbus".  In case of Qualcomm SLIMbus NGD, the bus node is what was
called "ngd".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-9-krzysztof.kozlowski@linaro.org

New slimbus DT schema expect only SLIMbus bus nodes to be named
"slimbus".  In case of Qualcomm SLIMbus NGD, the bus node is what was
called "ngd".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-8-krzysztof.kozlowski@linaro.org

Bindings document only two DMA channels.  Linux driver also does not use
remaining rx2/tx2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-7-krzysztof.kozlowski@linaro.org

Bindings document only two DMA channels.  Linux driver also does not use
remaining rx2/tx2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-6-krzysztof.kozlowski@linaro.org

Correct slimbus address/size cells to match bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-5-krzysztof.kozlowski@linaro.org

slimbus uses address-cells=2, so correct children unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-4-krzysztof.kozlowski@linaro.org

Drop undocumented reg-names from slimbus node - there is only one
address range and Linux implementation does not use it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-3-krzysztof.kozlowski@linaro.org

Drop properties from slimbus node: unneeded status and
downstream-related qcom,apps-ch-pipes/qcom,ea-pc (not documented, not
used).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-2-krzysztof.kozlowski@linaro.org

Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201415.1265191-2-robimarko@gmail.com

bootargs-append is a leftover from the vendor SDK, and does not exist
in the mainline kernel at all, so remove it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201415.1265191-1-robimarko@gmail.com

The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI).  This fixes dtbs_check warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
	From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-2-robimarko@gmail.com

Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-1-robimarko@gmail.com

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-10-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-9-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-8-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-7-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-6-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-5-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-4-dmitry.baryshkov@linaro.org

Add a node describing the RPMh shared memory that can be used to
retrieve statistics for the SoC low-power modes.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921080050.21383-1-johan+linaro@kernel.org

Add a new line between each subnode and make the { } consistent.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921004741.152765-1-konrad.dybcio@somainline.org