Commit 53dd0ba7 ("tty: serial: altera_jtag: drop uart_port->lock
before calling tty_flip_buffer_push()") claimed to address a locking
issue but only provided a dubious lockdep splat from an unrelated
driver, which in the end turned out to be due a broken local change
carried by the author.

Unfortunately these patches were merged before the issue had been
analysed properly so the commit messages makes no sense whatsoever.

The real issue was first seen on RT which at the time effectively always
set the low_latency flag for all serial drivers by patching
tty_flip_buffer_push(). This in turn revealed that many drivers did not
handle the infamous low_latency behaviour which meant that data was
pushed immediately to the line discipline instead of being deferred to a
work queue.

Since commit a9c3f68f ("tty: Fix low_latency BUG"),
tty_flip_buffer_push() always schedules a work item to push data to the
line discipline and there's no need to keep any low_latency hacks
around.

Link: https://lore.kernel.org/linux-serial/cover.1376923198.git.viresh.kumar@linaro.org/
Cc: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210421095509.3024-3-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 67d2bc58 ("Char: mxser_new, fix recursive locking") worked
around the infamous low_latency behaviour of tty_flip_buffer_push() by
simply dropping and reacquiring the port lock in the interrupt handler.

Since commit a9c3f68f ("tty: Fix low_latency BUG"),
tty_flip_buffer_push() always schedules a work item to push data to the
line discipline and there's no need to keep any low_latency hacks around.

Link: https://lore.kernel.org/lkml/3018694794025219@wsc.cz/T/#m06b04c640a7b6f41afb3d34a4cf29b1df4935d3aReviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210421095509.3024-2-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Data received during half-duplex transmission must be filtered.
If the target device responds quickly, emptying the FIFO at the end of
the transmission can erase not only the echo characters but also part of
the response message.
By keeping the receive interrupt enabled even during transmission, it
allows you to filter each echo character and only in a number equal to
those transmitted.
The issue was generated by a target device that started responding
240us later having received a request in communication at 115200bps.
Sometimes, some messages received by the target were missing some of the
first bytes.

Fixes: 3a13884a ("tty/serial: omap: empty the RX FIFO at the end of half-duplex TX")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Link: https://lore.kernel.org/r/20210418094705.27014-1-dariobin@libero.itSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are rs485 transceivers (e.g. MAX13487E/MAX13488E) which
automatically disable or enable the driver and receiver to keep the bus
in the correct state.
In these cases we don't need a GPIO for flow control.

Fixes: 4a0ac0f5 ("OMAP: add RS485 support")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Link: https://lore.kernel.org/r/20210415210945.25863-1-dariobin@libero.itSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the uart_unlock_and_check_sysrq() helper to defer sysrq processing
until receive processing is done and the port lock has been released.

This allows cleaning up the console_write() implementation by not having
to work around the recursive sysrq case (by dropping locking completely)
and also makes the console code work with PREEMPT_RT by no longer
relying on local_irq_save().

Reviewed-by: Valentin Caron<valentin.caron@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210416140557.25177-4-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When DMA is enabled the receive handler runs in a threaded handler, but
the primary handler up until very recently neither disabled interrupts
in the device or used IRQF_ONESHOT. This would lead to a deadlock if an
interrupt comes in while the threaded receive handler is running under
the port lock.

Commit ad767681 ("serial: stm32: fix a deadlock condition with
wakeup event") claimed to fix an unrelated deadlock, but unfortunately
also disabled interrupts in the threaded handler. While this prevents
the deadlock mentioned in the previous paragraph it also defeats the
purpose of using a threaded handler in the first place.

Fix this by making the interrupt one-shot and not disabling interrupts
in the threaded handler.

Note that (receive) DMA must not be used for a console port as the
threaded handler could be interrupted while holding the port lock,
something which could lead to a deadlock in case an interrupt handler
ends up calling printk.

Fixes: ad767681 ("serial: stm32: fix a deadlock condition with wakeup event")
Fixes: 34891872 ("serial: stm32: adding dma support")
Cc: stable@vger.kernel.org      # 4.9
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Gerald Baeza <gerald.baeza@st.com>
Reviewed-by: Valentin Caron<valentin.caron@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210416140557.25177-3-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The uart_unlock_and_check_sysrq() helper can be used to defer processing
of sysrq until the interrupt handler has released the port lock and is
about to return.

Since commit 81e2073c ("genirq: Disable interrupts for force
threaded handlers") interrupt handlers that are not explicitly requested
as threaded are always called with interrupts disabled and there is no
need to save the interrupt state when taking the port lock.

Instead of adding another sysrq helper for when the interrupt state has
not needlessly been saved, drop the state parameter from
uart_unlock_and_check_sysrq() and update its callers to no longer
explicitly disable interrupts in their interrupt handlers.

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210416140557.25177-2-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable count is being initialized with a value that is
never read and it is being updated later with a new value.  The
initialization is redundant and can be removed.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210420105718.377086-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

syzbot is reporting hung task due to flood of

  tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__,
           port->count);

message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from
decrementing port->count due to tty_hung_up_p() == true.

----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
	int i;
	int fd[10];

	for (i = 0; i < 10; i++)
		fd[i] = open("/dev/ttyprintk", O_WRONLY);
	ioctl(fd[0], TIOCVHANGUP);
	for (i = 0; i < 10; i++)
		close(fd[i]);
	close(open("/dev/ttyprintk", O_WRONLY));
	return 0;
}
----------

When TTY hangup happens, port->count needs to be reset via
"struct tty_operations"->hangup callback.

[1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6aReported-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+3ed715090790806d8b18@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 24b4b67d ("add ttyprintk driver")
Link: https://lore.kernel.org/r/17e0652d-89b7-c8c0-fb53-e7566ac9add4@i-love.sakura.ne.jpSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the transition to hrtimers there is no more need to set a minimum
RX timeout to work around latency issues.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210415093547.21639-1-uli+renesas@fpond.euSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a lot of tty-core-only functions that are listed in
include/linux/tty.h.  Move them to drivers/tty/tty.h so that no one else
can accidentally call them or think that they are public functions.

Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-14-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The flow change and restricted_tty_write() logic is internal to the tty
core only, so move it out of the include/linux/tty.h file.

Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-12-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one calls this outside of the tty_io.c file, so mark this static and
do not export the symbol anymore.

Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-11-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the TTY_LOCK_* enums and tty_ldisc lock functions out of the global
tty.h into the local header file to clean things up.

Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-10-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions tty_audit_add_data() and tty_audit_tiocsti() are local to
the tty core code, and do not need to be in a "kernel-wide" header file
so move them to drivers/tty/tty.h

Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-9-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one is calling this macro, and no one should, so remove it from the
.h file.

Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-3-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a number of functions and #defines in include/linux/tty.h that
do not belong there as they are private to the tty core code.

Create an initial drivers/tty/tty.h file and copy the odd "tty logging"
macros into it to seed the file with some initial things that we know
nothing outside of the tty core should be calling.

Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-2-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the error path for registering tty devices and roll back in case of error
in bid to avoid the UAF like the below one reported.

Plus syzbot reported general protection fault in cdev_del() on Sep 24, 2020
and both cases are down to the kobject_put() in tty_cdev_add().

 ------------[ cut here ]------------
 refcount_t: underflow; use-after-free.
 WARNING: CPU: 1 PID: 8923 at lib/refcount.c:28
 refcount_warn_saturate+0x1cf/0x210 -origin/lib/refcount.c:28
 Modules linked in:
 CPU: 1 PID: 8923 Comm: executor Not tainted 5.12.0-rc5+ #8
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
 1.13.0-1ubuntu1.1 04/01/2014
 RIP: 0010:refcount_warn_saturate+0x1cf/0x210 -origin/lib/refcount.c:28
 Code: 4f ff ff ff e8 32 fa b5 fe 48 c7 c7 3d f8 f6 86 e8 d6 ab c6 fe
 c6 05 7c 34 67 04 01 48 c7 c7 68 f8 6d 86 31 c0 e8 81 2e 9d fe <0f> 0b
 e9 22 ff ff ff e8 05 fa b5 fe 48 c7 c7 3e f8 f6 86 e8 a9 ab
 RSP: 0018:ffffc90001633c60 EFLAGS: 00010246
 RAX: 15d08b2e34b77800 RBX: 0000000000000003 RCX: ffff88804c056c80
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: 0000000000000003 R08: ffffffff813767aa R09: 0001ffffffffffff
 R10: 0001ffffffffffff R11: ffff88804c056c80 R12: ffff888040b7d000
 R13: ffff88804c206938 R14: ffff88804c206900 R15: ffff888041b18488
 FS:  00000000022c9940(0000) GS:ffff88807ec00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f9f9b122008 CR3: 0000000044b4b000 CR4: 0000000000750ee0
 PKRU: 55555554
 Call Trace:
  __refcount_sub_and_test -origin/./include/linux/refcount.h:283 [inline]
  __refcount_dec_and_test -origin/./include/linux/refcount.h:315 [inline]
  refcount_dec_and_test -origin/./include/linux/refcount.h:333 [inline]
  kref_put -origin/./include/linux/kref.h:64 [inline]
  kobject_put+0x17b/0x180 -origin/lib/kobject.c:753
  cdev_del+0x4b/0x50 -origin/fs/char_dev.c:597
  tty_unregister_device+0x99/0xd0 -origin/drivers/tty/tty_io.c:3343
  gsmld_detach_gsm -origin/drivers/tty/n_gsm.c:2409 [inline]
  gsmld_close+0x6c/0x140 -origin/drivers/tty/n_gsm.c:2478
  tty_ldisc_close -origin/drivers/tty/tty_ldisc.c:488 [inline]
  tty_ldisc_kill -origin/drivers/tty/tty_ldisc.c:636 [inline]
  tty_ldisc_release+0x1b6/0x400 -origin/drivers/tty/tty_ldisc.c:809
  tty_release_struct+0x19/0xb0 -origin/drivers/tty/tty_io.c:1714
  tty_release+0x9ad/0xa00 -origin/drivers/tty/tty_io.c:1885
  __fput+0x260/0x4e0 -origin/fs/file_table.c:280
  ____fput+0x11/0x20 -origin/fs/file_table.c:313
  task_work_run+0x8e/0x110 -origin/kernel/task_work.c:140
  tracehook_notify_resume -origin/./include/linux/tracehook.h:189 [inline]
  exit_to_user_mode_loop -origin/kernel/entry/common.c:174 [inline]
  exit_to_user_mode_prepare+0x16b/0x1a0 -origin/kernel/entry/common.c:208
  __syscall_exit_to_user_mode_work -origin/kernel/entry/common.c:290 [inline]
  syscall_exit_to_user_mode+0x20/0x40 -origin/kernel/entry/common.c:301
  do_syscall_64+0x45/0x80 -origin/arch/x86/entry/common.c:56
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com
Reported-and-tested-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/20210412035758.1974-1-hdanton@sina.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These correspond to the existing lpc_address, sirq, and sirq_polarity
sysfs attributes; the second element of aspeed,lpc-interrupts provides
a replacement for the deprecated aspeed,sirq-polarity-sense property.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-5-zev@bewilderbeest.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These allow describing all the Aspeed VUART attributes currently
available via sysfs.  aspeed,lpc-interrupts provides a replacement for
the deprecated aspeed,sirq-polarity-sense property.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-4-zev@bewilderbeest.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This splits dedicated aspeed_vuart_set_{sirq,lpc_address}() functions
out of the sysfs store functions in preparation for adding DT
properties that will be poking the same registers.  While we're at it,
these functions now provide some basic bounds-checking on their
arguments.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-3-zev@bewilderbeest.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This property ties SIRQ polarity to SCU register bits that don't
necessarily have any direct relationship to it; the only use of it was
removed in commit c82bf6e1 ("ARM: aspeed: g5: Do not set sirq
polarity").
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-2-zev@bewilderbeest.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sparse tool complains as follows:

drivers/tty/hvc/hvc_udbg.c:20:19: warning:
 symbol 'hvc_udbg_dev' was not declared. Should it be static?

This symbol is not used outside of hvc_udbg.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210407125826.4139130-1-yukuai3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 30004ac9 ("tty: add tty_struct->dev pointer to corresponding
device instance") added a struct device pointer field to struct
tty_struct which was populated with the corresponding tty class device
during initialisation.

Unfortunately, not all ttys have a class device (e.g. pseudoterminals
and serdev) in which case the device pointer will be set to NULL,
something which have bit driver authors over the years.

In retrospect perhaps this field should never have been added, but let's
at least document the current behaviour.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210409073512.6876-1-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210410035048.11466-1-cuibixuan@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include the generic serial.yaml dtschema so the child node like
"bluetooth" will be properly matched:

  arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml:
    serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210409172027.11296-1-krzysztof.kozlowski@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers can return -ENOIOCTLCMD when an ioctl is not recognised to tell
the upper layers to continue looking for a handler.

This is not the case for the RS485 and ISO7816 ioctls whose handlers
should return -ENOTTY directly in case a serial driver does not
implement the corresponding methods.

Fixes: a5f276f1 ("serial_core: Handle TIOC[GS]RS485 ioctls.")
Fixes: ad8c0eaa ("tty/serial_core: add ISO7816 infrastructure")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-9-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 5099d234 ("serial_core: switch to ->[sg]et_serial()")
the serial structure passed to uart_get_info() has already have been
cleared by the tty layer so drop the redundant memset.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-8-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Callout devices are long-gone, but the ASYNC_SPLIT_TERMIOS flag was
never added to the deprecation mask.

Add it so that a warning is printed if it is ever used.

Fixes: 8a8ae62f ("tty: warn on deprecated serial flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-7-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the deprecated serial flags handling and tty-operation check
shared with the compat TIOCSSERIAL handler.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-6-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use pr_warn_ratelimited() when warning about deprecated serial flags
instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-5-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Support for termiox was added by commit 1d65b4a0 ("tty: Add
termiox") in 2008 but no driver support ever followed and it was
recently ripped out by commit e0efb316 ("tty: Remove dead termiox
code").

Fix the return value for the unsupported termiox ioctls, which have
always returned -EINVAL, by explicitly returning -ENOTTY rather than
removing them completely and falling back to the default unrecognised-
ioctl handling.

Fixes: 1d65b4a0 ("tty: Add termiox")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-4-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.

Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.

Fixes: d281da7f ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.

Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.

Fixes: 5c0517fe ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the repeated word 'the' following advice of checkpatch.pl
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-11-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not use assignment in if condition following the advice of
checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-10-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issues of block comments, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-9-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-8-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix an issue of code indent should use tabs, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-7-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove spaces before tabs following the advice of checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://lore.kernel.org/r/1617779210-51576-6-git-send-email-tanxiaofei@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>