Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-2-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The axp803 and axp813 chips can report the detected USB BC mode. SDP,
CDP, and DCP are supported.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-5-aren@peacevolution.orgSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

When input_current_limit is set while USB BC is in progress, the BC
module will overwrite the value that was set when it finishes detection.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-4-aren@peacevolution.orgSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

On the axp803 and axp813 chips register 0x30 bits 0-1 is the default
current limit that gets applied after the pmic detects a CDP or DCP
port. The correct field to set is 0x35 bits 4-7.

This field only has nine values (out of the 16 possible if it used all
the bits), so introduce a field size variable to take that into account.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-3-aren@peacevolution.orgSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The current_max property is supposed to be read-only, and represent the
maximum current the supply can provide. input_current_limit is the
limit that is currently set, which is what we have here.

When determining what value to write to the register, we need to pick a
reasonable value if the requested limit doesn't exactly match one
supported by the hardware. If the requested limit is less than the
lowest value we can set, round up to the lowest value. Otherwise round
down to the nearest value supported by hardware.

Also add a dev field to the axp20x_usb_power struct, so we can use
dev_dbg and dev_err in more places.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-2-aren@peacevolution.orgSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-5-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-4-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-3-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-2-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-22-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-21-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-20-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-19-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-18-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-17-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-15-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-14-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-13-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-12-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-11-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-7-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-6-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-5-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-4-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-3-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-2-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This value only needs read once. Move that read into the function
that returns the value to keep the logic all in one place. This
also avoids doing this check every time we read in values in
the device update poll worker.

While here, correct this function's error message.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-5-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-4-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use a device lifecycle managed action to free the device mutex.
This helps prevent mistakes like freeing out of order in cleanup
functions and forgetting to free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-3-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use a device lifecycle managed action to free the IDA. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-2-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-1-afd@ti.comSigned-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>