- 29 Nov, 2016 40 commits
-
-
Linus Walleij authored
Instead of open coding the check for the same thing that the helper checks: use the helper. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
ahaslam@baylibre.com authored
Request card detect and write protect gpios using the provided API by mmc core. If a gpio is provided for card detect, we don't need to poll. So only use polling when a gpio is not provided. Once all pdata users register the gpios using gpio descriptors, we could remove the platform callbacks. Signed-off-by:
Axel Haslam <ahaslam@baylibre.com> Signed-off-by:
David Lechner <david@lechnology.com>
-
ahaslam@baylibre.com authored
Card detect and write protect are currently not working on a DT boot, and the driver relies on polling to get the state of the card. The current code depends on platform data callbacks to register and get the state of the gpios. mmc core provides a generic way to parse device tree configuration, which will take care of registering the gpios for us, lets use it so that we don't need to poll, and parse the same properties. Signed-off-by:
-
Wolfram Sang authored
We surely have SDIO support by now :) Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Wolfram Sang authored
Commit 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers") refactored the sdio irq handler and wrongly used the mask for SD irqs, not for SDIO irqs. This doesn't really matter in practice because both values keep the only interrupt we are interested in. But still, this is wrong and wants to be fixed. Signed-off-by:
-
Alexey Khoroshilov authored
wbsd_request_dma() does not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Dan Carpenter authored
We never set "ret" to RESULT_OK. Fixes: 9f9c4180 ("mmc: mmc_test: add test for non-blocking transfers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Masahiro Yamada authored
The type of host->private is (unsigned long *). No cast is needed to return an opaque pointer. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Scott Branden authored
Add bytewise register accesses support for newer versions of IPROC SDHCI controllers. Previous sdhci-iproc versions of SDIO controllers (such as Raspberry Pi and Cygnus) only allowed for 32-bit register accesses. Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
-
Scott Branden authored
Adds brcm,sdhci-iproc compat string to DT bindings document for the iProc SDHCI driver. Signed-off-by:
Anup Patel <anup.patel@broadcom.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Simon Horman authored
Add tuning support for use with SDR104 mode This includes adding support for the sampling clock controller (SCC). Based on work by Ai Kyuse. Cc: Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by:
-
Ai Kyuse authored
Add tuning support for use with SDR104 mode Signed-off-by:
Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by:
-
Ai Kyuse authored
Add hw reset support. Signed-off-by:
-
Simon Horman authored
Signed-off-by:
-
Ai Kyuse authored
An illegal sequence command error may occur if there is a stopbit or cmd_index error as well as a CRC error. The correct course of action is to re-enable IRQs An illegal sequence data error may occur if there is a CRC or stopbit error, or underrun. In this case set data->error correctly. This is in preparation for enabling tuning support which relies on differentiating between illegal sequence and other errors. Signed-off-by:
-
Simon Horman authored
This is in preparation for restoring saved tuning parameters when resuming the TMIO driver. Signed-off-by:
-
Chris Brandt authored
Add support for r7s72100 SoC. Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
-
Chris Brandt authored
For the r7s72100 SOC, the DATA_PORT register was changed to 32-bits wide. Therefore a new flag has been created that will allow 32-bit reads/writes to the DATA_PORT register instead of 16-bit (because 16-bits accesses are not supported). Signed-off-by:
-
Chris Brandt authored
In moving platforms from board files to DT, there still needs to be a way to set the ocr_mask setting for the tmio driver during probe. Without this setting, the probe will fail because the supported voltages are not known. This patch will also traditional platform registration platforms to migrate to DT. Signed-off-by:
-
Linus Walleij authored
There were several instances of code using the enum mmc_blk_status by arbitrarily converting it to an int and throwing it around to different functions. This makes the code hard to understand to may give rise to strange errors. Especially the function prototype mmc_start_req() had to be modified to take a pointer to an enum mmc_blk_status and the function pointer .err_check() inside struct mmc_async_req needed to return an enum mmc_blk_status. In every case: instead of assigning the block layer error code to an int, use the enum, also change the signature of all functions actually passing this enum to use the enum. To make it possible to use the enum everywhere applicable, move it to <linux/mmc/core.h> so that all code actually using it can also see it. An interesting case was encountered in the MMC test code which did not return a enum mmc_blk_status at all in the .err_check function supposed to check whether asynchronous requests worked or not: instead it returned a normal -ERROR or even the test frameworks internal error codes. The test code would also pass on enum mmc_blk_status codes as error codes inside the test code instead of converting them to the local RESULT_* codes. I have tried to fix all instances properly and run some tests on the result. Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Linus Walleij authored
The ecc_err flag is only assigned 0 or 1 and treated as a bool, so convert it to a bool. Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Linus Walleij authored
This gen_err flag is only assigned 0 or 1 and treated as a bool, so convert it to a bool. Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Zach Brown authored
The sdhci capabilities register can be incorrect. The sdhci-caps-mask and sdhci-caps dt properties specify which bits of the register are incorrect and what their values should be. This patch makes the sdhci driver use those properties to correct the caps during __sdhci_read_caps. During __sdhci_read_caps Use the sdhci-caps-mask property to turn off the incorrect bits of the sdhci register after reading them. Use the sdhci-caps to turn on bits after using sdhci-caps-mask to turn off the incorrect ones. Signed-off-by:
Zach Brown <zach.brown@ni.com> Acked-by:
-
Zach Brown authored
On some systems the sdhci capabilty register is incorrect for one reason or another. The sdhci-caps-mask property specifies which bits in the register are incorrect and should be turned off before using sdhci-caps to turn on bits. The sdhci-caps property specifies which bits should be turned on. Signed-off-by:
-
Linus Walleij authored
The ST Micro-specific busy detection was made after the assumption that only this variant supports busy detection. So when doing busy detection, the host immediately tries to use some ST-specific register bits. Since the qualcomm variant also supports some busy detection schemes, encapsulate the variant flags better in the variant struct and prepare to add more variants by just providing some bitmasks to the logic. Put the entire busy detection logic within an if()-clause in the mmci_cmd_irq() function so the code is only executed when busy detection is enabled, and so that it is kept in (almost) one place, and add comments describing what is going on so the code can be understood. Tested on the Ux500 by introducing some prints in the busy detection path and noticing how the IRQ is enabled, used and disabled successfully. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Linus Walleij authored
There was some confusion in the CPSM (Command Path State Machine) and DPSM (Data Path State Machine) regarding the naming of the registers, clarify the meaning of this acronym so the naming is understandable, and consistently use BIT() to define these fields. Consequently name the register bit defines MCI_[C|D]PSM_* and adjust the driver as well. Include new definitions for a few bits found in a patch from Srinivas Kandagatla. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Sylwester Nawrocki authored
Support for DMA slave map has been added to the s3c24xx-dma controller in commit 34681d84 "dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devices" This patch converts the s3cmci driver to also use it, so we can eventually get rid of the exported filter function once all related DMA clients are updated. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ulf Hansson authored
The MMC_CAP2_NO_PRESCAN_POWERUP was invented to avoid running the power up sequence, mmc_power_up(), during ->probe() of the mmc host driver, but instead defer this to the mmc detect work. This is especially useful for those hosts that suffers from a long initialization time, as this time would otherwise add up to the total boot time. However, due to the introduction of runtime PM of mmc host devices in the mmc core, this behaviour changed a bit. More precisely, it caused the mmc core to runtime resume the host device during ->probe() of the host driver. In cases like the rtsx_usb_sdmmc, runtime resuming the device may be costly and thus affecting the total boot time. To improve this behaviour when using MMC_CAP2_NO_PRESCAN_POWERUP, let's postpone also calling mmc_power_off() when starting the host. This change allows the mmc core to avoid runtime resuming the device, as it don't need to claim the host for that execution path. Cc: Ritesh Raj Sarraf <rrs@researchut.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: -
Kevin Hilman authored
Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Acked-by:
-
Kevin Hilman authored
Initial support for the SD/eMMC controller in the Amlogic S905/GX* family of SoCs. Signed-off-by:
-
Shawn Lin authored
Now there are no variant drivers using dw_mci_suspend and dw_mci_resume, so let's remove it. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Shawn Lin authored
Let's migrate it to use runtime PM and remove the system PM callback from this driver. With this patch, it could handle system PM properly and could also use runtime PM if we enable it. Signed-off-by:
-
Shawn Lin authored
Let's migrate it to use runtime PM and remove the system PM callback from this driver. With this patch, it could handle system PM properly and could also use runtime PM if we enable it. Signed-off-by:
-
Shawn Lin authored
Let's migrate it to use runtime PM and remove the system PM callback from this driver. With this patch, it could handle system PM properly and could also use runtime PM if we enable it. Signed-off-by:
-
Shawn Lin authored
Let's migrate it to use runtime PM and remove the system PM callback from this driver. With this patch, it could handle system PM properly and could also use runtime PM if we enable it. Signed-off-by:
-
Shawn Lin authored
We could disable biu clk if gpio card detect available, or it is a non-removable device. Signed-off-by:
-
Shawn Lin authored
Add new helper API mmc_can_gpio_cd for slot-gpio to make host drivers know whether it supports gpio card detect. Signed-off-by:
-
Shawn Lin authored
This patch adds runtime PM support for dw_mmc-rockchip. Signed-off-by:
-
Shawn Lin authored
This patch add dw_mci_runtime_suspend/resume interfaces and expose it to dw_mci variant driver to support runtime PM. Signed-off-by:
-
Ulf Hansson authored
When polling for busy after sending a MMC_SWITCH command, both the optional ->card_busy() callback and CMD13 are being used in conjunction. This doesn't make sense. Instead it's more reasonable to rely solely on the ->card_busy() callback when it exists. Let's change that and instead use the CMD13 as a fall-back. In this way we avoid sending CMD13, unless it's really needed. Within this context, let's also take the opportunity to make some additional clean-ups and clarifications to the related code. Signed-off-by:
-
