- 06 Jul, 2018 1 commit
-
-
Johan Hovold authored
Make sure to disable clocks and deregister any exported partitions before returning on late probe errors. Note that since commit ee895ccd ("misc: sram: fix enabled clock leak on error path"), partitions are deliberately exported before enabling the clock so we stick to that logic here. A follow up patch will address this. Fixes: 2ae2e288 ("misc: sram: add Atmel securam support") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Jul, 2018 28 commits
-
-
Alexander Usyskin authored
The ME FW version is constantly used by detection and update tools. To improve the reliability and simplify these tools provide a sysfs interface to access version of the platform ME firmware in the following format: <platform>:<major>.<minor>.<milestone>.<build>. There can be up to three such blocks for different FW components. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
Add optional timeout to internal bus recv function to enable break out of internal flows in case of no answer from FW. Signed-off-by:
-
Alexander Usyskin authored
MEI_IAMTHIF_STALL_TIMER is unused now and can be safely removed. Signed-off-by:
-
Michael Kelley authored
The Hyper-V feature and hint flags in hyperv-tlfs.h are all defined with the string "X64" in the name. Some of these flags are indeed x86/x64 specific, but others are not. For the ones that are used in architecture independent Hyper-V driver code, or will be used in the upcoming support for Hyper-V for ARM64, this patch removes the "X64" from the name. This patch changes the flags that are currently known to be used on multiple architectures. Hyper-V for ARM64 is still a work-in-progress and the Top Level Functional Spec (TLFS) has not been separated into x86/x64 and ARM64 areas. So additional flags may need to be updated later. This patch only changes symbol names. There are no functional changes. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Commit ea81fdf0 ("Tools: hv: vss: Skip freezing filesystems backed by loop") added skip for filesystems backed by loop device. However, it seems the detection of such cases is incomplete. It was found that with 'devicemapper' storage driver docker creates the following chain: NAME MAJ:MIN loop0 7:0 ..docker-8:4-8473394-pool 253:0 ..docker-8:4-8473394-eac... 253:1 so when we're looking at the mounted device we see major '253' and not '7'. Solve the issue by walking /sys/dev/block/*/slaves chain and checking if there's a loop device somewhere. Other than that, don't skip mountpoints silently when stat() fails. In case e.g. SELinux is failing stat we don't want to skip freezing everything without letting user know about the failure. Fixes: ea81fdf0 ("Tools: hv: vss: Skip freezing filesystems backed by loop") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Olaf Hering authored
Python3 changed the way how 'print' works. Adjust the code to a syntax that is understood by python2 and python3. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Acked-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Michael Kelley authored
In architecture independent code for manipulating Hyper-V synthetic timers and synthetic interrupts, pass in an ordinal number identifying the timer or interrupt, rather than an actual MSR register address. Then in x86/x64 specific code, map the ordinal number to the appropriate MSR. This change facilitates the introduction of an ARM64 version of Hyper-V, which uses the same synthetic timers and interrupts, but a different mechanism for accessing them. Signed-off-by:
-
Dexuan Cui authored
I didn't really hit a real bug, but just happened to spot the bug: we have decreased the counter at the beginning of vmbus_process_offer(), so we mustn't decrease it again. Fixes: 6f3d791f ("Drivers: hv: vmbus: Fix rescind handling issues") Signed-off-by:
-
Michael Kelley authored
Add comments describing intricacies of Hyper-V ring buffer signaling code. This information is not in Hyper-V public documents, so include here to capture the knowledge for future coders. There are no code changes in this commit. Signed-off-by:
-
Michael Kelley authored
Add standard interrupt handler annotations to hyperv_vector_handler(). This does not fix any observed bug, but avoids potential removal of the code by link time optimization and makes it consistent with hv_stimer0_vector_handler in the same source file. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arjan van de Ven authored
Recent kernels support asynchronous probing; most hyperv drivers can be probed async easily so set the required flag for this. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Colin Ian King authored
Variable csrval_len is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'csrval_len' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Pointer dev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer hpet is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'hpet' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Tasklet goldfish_interrupt_tasklet is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'goldfish_interrupt_tasklet' was not declared. Should it be static? Signed-off-by:
-
Colin Ian King authored
The variable extra_config is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'extra_config' was not declared. Should it be static? Signed-off-by:
-
Colin Ian King authored
Several helper functions are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rtsx_pm_power_saving' was not declared. Should it be static? symbol 'rtsx_set_l1off_sub_cfg_d0' was not declared. Should it be static? symbol 'rtsx_pm_full_on' was not declared. Should it be static? symbol 'rtsx_comm_set_ltr_latency' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp_interrupt' was not declared. Should it be static? Signed-off-by:
-
Colin Ian King authored
Variable is_local is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'is_local' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable type is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'type' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
The pointers ch and rp are set but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'ch' set but not used [-Wunused-but-set-variable] warning: variable 'rp' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
The variables val16, type, pci_dev and type are set but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'type' set but not used [-Wunused-but-set-variable] warning: variable 'val16' set but not used [-Wunused-but-set-variable] warning: variable 'pci_dev' set but not used [-Wunused-but-set-variable] warning: variable 'type' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Nadav Amit authored
Philip Moltman is no longer a maintainer of the VMware balloon. Setting Nadav Amit as one instead. Reviewed-by:
Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Nadav Amit authored
Removing the GPL wording and replace it with an SPDX tag. The immediate trigger for doing it now is the need to remove the list of maintainers from the source file, as the maintainer list changed. Reviewed-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
-
Nadav Amit authored
Since commit 33d268ed ("VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode."), the allocations are not increased, and therefore balloon inflation rate limiting is in practice broken. While we can restore rate limiting, in practice we see that it can result in adverse effect, as the hypervisor throttles down the VM if it does not respond well enough, or alternatively causes it to perform very poorly as the host swaps out the VM memory. Throttling the VM down can even have a cascading effect, in which the VM reclaims memory even slower and consequentially throttled down even further. We therefore remove all the rate limiting mechanisms, including the slow allocation cycles, as they are likely to do more harm than good. Fixes: 33d268ed ("VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode.") Reviewed-by:
-
Nadav Amit authored
Currently, when all modules, including VMCI and VMware balloon are built into the kernel, the initialization of the balloon happens before the VMCI is probed. As a result, the balloon fails to initialize the VMCI doorbell, which it uses to get asynchronous requests for balloon size changes. The problem can be seen in the logs, in the form of the following message: "vmw_balloon: failed to initialize vmci doorbell" The driver would work correctly but slightly less efficiently, probing for requests periodically. This patch changes the balloon to be initialized using late_initcall() instead of module_init() to address this issue. It does not address a situation in which VMCI is built as a module and the balloon is built into the kernel. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by:
-
Nadav Amit authored
When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for some reason it does not consider the status and looks at the result. However, the hypervisor does not update the result - it updates the status. This might cause VMCI doorbell not to be enabled, resulting in degraded performance. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by:
-
Nadav Amit authored
If the hypervisor sets 2MB batching is on, while batching is cleared, the balloon code breaks. In this case the legacy mechanism is used with 2MB page. The VM would report a 2MB page is ballooned, and the hypervisor would only take the first 4KB. While the hypervisor should not report such settings, make the code more robust by not enabling 2MB support without batching. Fixes: 365bd7ef ("VMware balloon: Support 2m page ballooning.") Cc: stable@vger.kernel.org Reviewed-by:
-
Nadav Amit authored
When balloon batching is not supported by the hypervisor, the guest frame number (GFN) must fit in 32-bit. However, due to a bug, this check was mistakenly ignored. In practice, when total RAM is greater than 16TB, the balloon does not work currently, making this bug unlikely to happen. Fixes: ef0f8f11 ("VMware balloon: partially inline vmballoon_reserve_page.") Cc: stable@vger.kernel.org Reviewed-by:
-
- 28 Jun, 2018 8 commits
-
-
Johan Hovold authored
Add a "type" device attribute and a "GNSS_TYPE" uevent variable which can be used to determine the type of a GNSS receiver. The currently identified types reflect the protocol(s) supported by a receiver: "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX Note that both SiRF and UBX type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow switching to the vendor protocol). Signed-off-by:
-
Johan Hovold authored
Add driver for serial-connected SiRFstar-based GNSS receivers. These devices typically boot into hibernate mode from which they can be woken using a pulse on the ON_OFF input pin. Once active, a pulse on the same ON_OFF pin is used to put the device back into hibernate mode. The current state can be determined by sampling the WAKEUP output. Hardware configurations where WAKEUP has been connected to ON_OFF (and where an initial WAKEUP pulse during boot is sufficient to have the device boot into active mode) are also supported. In this case, device power is managed using the main-supply regulator only. Note that configurations where WAKEUP is left not connected, so that the device power state can only indirectly be determined using the I/O interface, is currently not supported. It should be fairly straight-forward to extend the current implementation with such support however (and this this is the main reason for not using the generic serial implementation for this driver). Note that timepulse-support is left unimplemented. Signed-off-by:
-
Johan Hovold authored
Add binding for SiRFstar-based GNSS receivers. Note that while four compatible-strings are initially added representing devices which differ in which I/O interfaces they support, they otherwise essentially share the same feature set. Pin and supply names vary slightly, as do some recommended timings. Note that the wakeup gpio is not intended to be used as a wakeup source, but rather to detect the current power state of the device (active or hibernate). Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
Add driver for serial-connected u-blox GNSS receivers. Note that the driver uses the generic GNSS serial implementation and therefore essentially only manages power abstracted into three power states: ACTIVE, STANDBY, and OFF. For u-blox receivers with a main supply and no enable-gpios, this simply means that the main supply is disabled in STANDBY and OFF (the optional backup supply is kept enabled while the driver is bound). Note that timepulse-support is not yet implemented. Signed-off-by:
-
Johan Hovold authored
Add binding for u-blox GNSS receivers. Note that the u-blox product names encodes form factor (e.g. "neo"), chipset (e.g. "8") and variant (e.g. "q"), but that only formfactor and chipset is used for the compatible strings (for now). Signed-off-by:
-
Johan Hovold authored
Add a generic serial GNSS driver (library) which provides a common implementation for the gnss interface and power management (runtime and system suspend). This allows GNSS drivers for specific chip to be implemented by simply providing a set_power() callback to handle three states: ACTIVE, STANDBY and OFF. Signed-off-by:
-
Johan Hovold authored
Describe generic properties for GNSS receivers. Reviewed-by:
-
Johan Hovold authored
Add a new subsystem for GNSS (e.g. GPS) receivers. While GNSS receivers are typically accessed using a UART interface they often also support other I/O interfaces such as I2C, SPI and USB, while yet other devices use iomem or even some form of remote-processor messaging (rpmsg). The new GNSS subsystem abstracts the underlying interface and provides a new "gnss" class type, which exposes a character-device interface (e.g. /dev/gnss0) to user space. This allows GNSS receivers to have a representation in the Linux device model, something which is important not least for power management purposes. Note that the character-device interface provides raw access to whatever protocol the receiver is (currently) using, such as NMEA 0183, UBX or SiRF Binary. These protocols are expected to be continued to be handled by user space for the time being, even if some hybrid solutions are also conceivable (e.g. to have kernel drivers issue management commands). This will still allow for better platform integration by allowing GNSS devices and their resources (e.g. regulators and enable-gpios) to be described by firmware and managed by kernel drivers rather than platform-specific scripts and services. While the current interface is kept minimal, it could be extended using IOCTLs, sysfs or uevents as needs and proper abstraction levels are identified and determined (e.g. for device and feature identification). Signed-off-by:
-
- 24 Jun, 2018 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A pile of perf updates: Kernel side: - Remove an incorrect warning in uprobe_init_insn() when insn_get_length() fails. The error return code is handled at the call site. - Move the inline keyword to the right place in the perf ringbuffer code to address a W=1 build warning. Tooling: perf stat: - Fix metric column header display alignment - Improve error messages for default attributes, providing better output for error in command line. - Add --interval-clear option, to provide a 'watch' like printing perf script: - Show hw-cache events too perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry' Core: - Do not blindly assume that 'struct perf_evsel' can be obtained via a straight forward container_of() as there are call sites which hand in a plain 'struct hist' which is not part of a container. - Fix error index in the PMU event parser, so that error messages can point to the problematic token" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Move the inline keyword at the beginning of the function declaration uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn() perf script: Show hw-cache events perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry perf stat: Add event parsing error handling to add_default_attributes perf stat: Allow to specify specific metric column len perf stat: Fix metric column header display alignment perf stat: Use only color_fprintf call in print_metric_only perf stat: Add --interval-clear option perf tools: Fix error index for pmu event parser perf hists: Reimplement hists__has_callchains() perf hists browser gtk: Use hist_entry__has_callchains() perf hists: Make hist_entry__has_callchains() work with 'perf c2c' perf hists: Save the callchain_size in struct hist_entry -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rseq fixes from Thomas Gleixer: "A pile of rseq related fixups: - Prevent infinite recursion when delivering SIGSEGV - Remove the abort of rseq critical section on fork() as syscalls inside rseq critical sections are explicitely forbidden. So no point in doing the abort on the child. - Align the rseq structure on 32 bytes in the ARM selftest code. - Fix file permissions of the test script" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Avoid infinite recursion when delivering SIGSEGV rseq/cleanup: Do not abort rseq c.s. in child on fork() rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes rseq/selftests: Make run_param_test.sh executable
-
