- 09 Nov, 2015 40 commits
-
-
Arnd Bergmann authored
commit 835da3f9 upstream. Compiling the nvme driver on 32-bit warns about a cast from a __u64 variable to a pointer: drivers/block/nvme-core.c: In function 'nvme_submit_io': drivers/block/nvme-core.c:1847:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (void __user *)io.addr, length, NULL, 0); The cast here is intentional and safe, so we can shut up the gcc warning by adding an intermediate cast to 'uintptr_t'. I had previously submitted a patch to fix this problem in the nvme driver, but it was accepted on the same day that two new warnings got added. For clarification, I also change the third instance of this cast to use uintptr_t instead of unsigned long now. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: d29ec824 ("nvme: submit internal commands through the block layer") Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 4dcb8b57 upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 3201ac45 upstream. If the CLEAN_SHUTDOWN flag is not set when a cache is loaded then all cache blocks are marked as dirty and a full writeback occurs. __commit_transaction() is responsible for setting/clearing CLEAN_SHUTDOWN (based the flags_mutator that is passed in). Fix this issue, of the cache's on-disk flags being wrong, by making sure __commit_transaction() does not reset the flags after the mutator has altered the flags in preparation for them being serialized to disk. before: sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); disk_super->flags = cpu_to_le32(cmd->flags); after: disk_super->flags = cpu_to_le32(cmd->flags); sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); Reported-by:
Bogdan Vasiliev <bogdan.vasiliev@gmail.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2871c69e upstream. Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by:
-
Tejun Heo authored
commit b02176f3 upstream. bdi's are initialized in two steps, bdi_init() and bdi_register(), but destroyed in a single step by bdi_destroy() which, for a bdi embedded in a request_queue, is called during blk_cleanup_queue() which makes the queue invisible and starts the draining of remaining usages. A request_queue's user can access the congestion state of the embedded bdi as long as it holds a reference to the queue. As such, it may access the congested state of a queue which finished blk_cleanup_queue() but hasn't reached blk_release_queue() yet. Because the congested state was embedded in backing_dev_info which in turn is embedded in request_queue, accessing the congested state after bdi_destroy() was called was fine. The bdi was destroyed but the memory region for the congested state remained accessible till the queue got released. a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback") changed the situation. Now, the root congested state which is expected to be pinned while request_queue remains accessible is separately reference counted and the base ref is put during bdi_destroy(). This means that the root congested state may go away prematurely while the queue is between bdi_dstroy() and blk_cleanup_queue(), which was detected by Andrey's KASAN tests. The root cause of this problem is that bdi doesn't distinguish the two steps of destruction, unregistration and release, and now the root congested state actually requires a separate release step. To fix the issue, this patch separates out bdi_unregister() and bdi_exit() from bdi_destroy(). bdi_unregister() is called from blk_cleanup_queue() and bdi_exit() from blk_release_queue(). bdi_destroy() is now just a simple wrapper calling the two steps back-to-back. While at it, the prototype of bdi_destroy() is moved right below bdi_setup_and_register() so that the counterpart operations are located together. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback") Reported-and-tested-by:
Andrey Konovalov <andreyknvl@google.com> Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.comReviewed-by:
Jan Kara <jack@suse.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit e13d918a upstream. Commit dd006da2 ("arm64: mm: increase VA range of identity map") introduced a mechanism to extend the virtual memory map range to support arm64 systems with system RAM located at very high offset, where the identity mapping used to enable/disable the MMU requires additional translation levels to map the physical memory at an equal virtual offset. The kernel detects at boot time the tcr_el1.t0sz value required by the identity mapping and sets-up the tcr_el1.t0sz register field accordingly, any time the identity map is required in the kernel (ie when enabling the MMU). After enabling the MMU, in the cold boot path the kernel resets the tcr_el1.t0sz to its default value (ie the actual configuration value for the system virtual address space) so that after enabling the MMU the memory space translated by ttbr0_el1 is restored as expected. Commit dd006da2 ("arm64: mm: increase VA range of identity map") also added code to set-up the tcr_el1.t0sz value when the kernel resumes from low-power states with the MMU off through cpu_resume() in order to effectively use the identity mapping to enable the MMU but failed to add the code required to restore the tcr_el1.t0sz to its default value, when the core returns to the kernel with the MMU enabled, so that the kernel might end up running with tcr_el1.t0sz value set-up for the identity mapping which can be lower than the value required by the actual virtual address space, resulting in an erroneous set-up. This patchs adds code in the resume path that restores the tcr_el1.t0sz default value upon core resume, mirroring this way the cold boot path behaviour therefore fixing the issue. Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: dd006da2 ("arm64: mm: increase VA range of identity map") Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
-
H. Nikolaus Schaller authored
commit 38850d78 upstream. Commit 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") unfortunately introduced a bug created but not found during discussion and patch simplification. Reported-by:
Efraim Yawitz <efraim.yawitz@gmail.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Fixes: 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
H. Nikolaus Schaller authored
commit 8a603f91 upstream. If the host toolchain is not glibc based then the arm kernel build fails with HOSTCC arch/arm/vdso/vdsomunge arch/arm/vdso/vdsomunge.c:48:22: fatal error: byteswap.h: No such file or directory Observed: with omap2plus_defconfig and compile on Mac OS X with arm ELF cross-compiler. Reason: byteswap.h is a glibc only header. Solution: replace by private byte-swapping macros (taken from arch/mips/boot/elf2ecoff.c and kindly improved by Russell King) Tested to compile on Mac OS X 10.9.5 host. Signed-off-by:
-
Aaro Koskinen authored
commit 1bd5dfe4 upstream. Commit 685e2d08 ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") turned on SPARSE_IRQ on OMAP1, but forgot to change the number of INT_DMA_LCD. This broke the boot at least on Nokia 770, where the device hangs during framebuffer initialization. Fix by defining INT_DMA_LCD like the other interrupts. Fixes: 685e2d08 ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Linus Walleij authored
commit 83bf6b13 upstream. commit 1d8aca9d "ARM: ux500: fix MMC/SD card regression" fixed broken the level shifter: it should be default ON but became default OFF. Fixes: 1d8aca9d "ARM: ux500: fix MMC/SD card regression" Reported-and-tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tomi Valkeinen authored
commit 7e381ec6 upstream. LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Louis McCarthy <compeoree@gmail.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Fabio Estevam authored
commit 178b2d09 upstream. The UART2 memory space starts at address 0x30890000 (UART2_URXD). Fix it so that UART2 can be used. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Fixes: 94967345 ("ARM: dts: add imx7d soc dtsi file") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Alim Akhtar authored
commit b8bb9baa upstream. Since commit 2fad972d ("ARM: dts: Add mclk entry for Peach boards"), sound card detection is broken on peach boards and gives below errors: [ 3.630457] max98090 7-0010: MAX98091 REVID=0x51 [ 3.634233] max98090 7-0010: use default 2.8v micbias [ 3.640985] snow-audio sound: HiFi <-> 3830000.i2s mapping ok [ 3.645307] max98090 7-0010: Invalid master clock frequency [ 3.650824] snow-audio sound: ASoC: Peach-Pi-I2S-MAX98091 late_probe() failed: -22 [ 3.658914] snow-audio sound: snd_soc_register_card failed (-22) [ 3.664366] snow-audio: probe of sound failed with error -22 This patch adds missing assigned-clocks and assigned-clock-parents for pmu_system_controller node which is used as "mclk" for audio codec. Fixes: 2fad972d ("ARM: dts: Add mclk entry for Peach boards") Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Thomas Hebb authored
commit 1f744fd3 upstream. Currently, BG2Q shares a compatible with BG2. This is incorrect, since BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect that. Signed-off-by:
Thomas Hebb <tommyhebb@gmail.com> Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Marcin Wojtas authored
commit db347f1a upstream. This commit enables standby support on Armada 385 DB-AP board, because the PM initalization routine requires "marvell,armada380" compatible string for all Armada 38x-based platforms. Beside the compatible "marvell,armada38x" was wrong and should be fixed in the stable kernels too. [gregory.clement@free-electrons.com: add information, about the fixes] Fixes: e5ee1281 ("ARM: mvebu: Add Armada 385 Access Point Development Board support") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Florian Fainelli authored
commit d836ace6 upstream. DSA expects the host_dev pointer to be the device structure associated with the MDIO bus controller driver. First commit breaking that was c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver"), and then, it got completely under the radar for a while. Reported-by:
Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 51a6256b upstream. On each next iteration of for_each_compatible_node() the reference counter for current device node is already decreased by the loop iterator. The manual call to of_node_get() is required only on loop break which is not happening here. The double of_node_get() (with enabled CONFIG_OF_DYNAMIC) lead to decreasing the counter below expected, initial value. Fixes: fe4034a3 ("ARM: EXYNOS: Add missing of_node_put() when parsing power domains") Signed-off-by:
-
Ilya Dryomov authored
commit 6d69bb53 upstream. Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 1f2c6651 upstream. Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] [idryomov@gmail.com: backport to 3.18-4.2: context] Signed-off-by:
-
Dan Carpenter authored
commit eda7d0f3 upstream. "num_read" is in byte units but we are write u16s so we end up write twice as much as intended. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Linus Walleij authored
commit 61fd5630 upstream. This accelerometer accidentally either emits a DRDY signal or an IRQ signal. Accidentally I activated the IRQ signal as I thought it was analogous to the interrupt generator on other ST accelerometers. This was wrong. After this patch generic_buffer gives a nice stream of accelerometer readings. Fixes: 3acddf74 "iio: st-sensors: add support for lis3lv02d accelerometer" Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by:
-
Alexandre Belloni authored
commit b94e2280 upstream. 0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset. Also improve the comment explaining the calculation. Reported-by:
Janusz Użycki <j.uzycki@elpromaelectronics.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alex Deucher authored
commit 4cee6a90 upstream. So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit ae93580e upstream. If driver backlight control is disabled, either by driver parameter or default per-asic setting, revert to the old behavior. Fixes a regression in commit: 4281f46eReviewed-by:
-
Alex Deucher authored
commit c86f5ebf upstream. Fixes an error on resume caused by: fa022a9bSigned-off-by:
-
Alex Deucher authored
commit 49abb266 upstream. Fixes a harmless error message caused by: 51a4726bSigned-off-by:
-
Chris Wilson authored
commit cc917ab4 upstream. Pinning a userptr onto the hardware raises interesting questions about the lifetime of such a surface as the framebuffer extends that life beyond the client's address space. That is the hardware will need to keep scanning out from the backing storage even after the client wants to remap its address space. As the hardware pins the backing storage, the userptr becomes invalid and this raises a WARN when the clients tries to unmap its address space. The situation can be even more complicated when the buffer is passed between processes, between a client and display server, where the lifetime and hardware access is even more confusing. Deny it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8e7a65aa upstream. We accidentally lost the initial DPLL register write in 1c4e0274 drm/i915: Fix DVO 2x clock enable on 830M The "three times for luck" hack probably saved us from a total disaster. But anyway, bring the initial write back so that the code actually makes some sense. Reported-and-tested-by:
Nick Bowler <nbowler@draconx.ca> References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com Cc: Nick Bowler <nbowler@draconx.ca> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 40a24488 upstream. In order to flush the results from in-batch pipecontrol writes (used for example in glQuery) before declaring the batch complete (and so declaring the query results coherent), we need to set the FlushEnable bit in our flushing pipecontrol. The FlushEnable bit "waits until all previous writes of immediate data from post-sync circles are complete before executing the next command". I get GPU hangs on byt without flushing these writes (running ue4). piglit has examples where the flush is required for correct rendering. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 677c884f upstream. Skip dpm late init if dpm is disabled. Signed-off-by:
-
Alex Deucher authored
commit 2a7d44f4 upstream. PWM fan control is only available with DPM. If DPM disabled, don't expose the PWM fan controls to avoid a crash. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92524Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Pawel Moll authored
commit a0bcbe96 upstream. When PMU context is migrating between CPUs, interrupt affinity is set as well. Only this should not happen when the CCN interrupt is not being used at all (the driver is using a hrtimer tick instead). Fixed now. Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit a2d76290 upstream. The stack tracer was triggering the WARN_ON() in module.c: static void module_assert_mutex_or_preempt(void) { #ifdef CONFIG_LOCKDEP if (unlikely(!debug_locks)) return; WARN_ON(!rcu_read_lock_sched_held() && !lockdep_is_held(&module_mutex)); #endif } The reason is that the stack tracer traces all function calls, and some of those calls happen while exiting or entering user space and idle. Some of these functions are called after RCU had already stopped watching, as RCU does not watch userspace or idle CPUs. If a max stack is hit, then the save_stack_trace() is called, which will check module addresses and call module_assert_mutex_or_preempt(), and then trigger the warning. Sad part is, the warning itself will also do a stack trace and tigger the same warning. That probably should be fixed. The warning was added by 0be964be "module: Sanitize RCU usage and locking" but this bug has probably been around longer. But it's unlikely to cause much harm, but the new warning causes the system to lock up. Cc: Peter Zijlstra <peterz@infradead.org> Cc:"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Florian Westphal authored
commit bb387002 upstream. interval displays the probability and vice versa. Fixes: 6adc4a22 ("fault-inject: add ratelimit option") Acked-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Werner Pawlitschko authored
commit ababae44 upstream. Commit 4857c91f changed the way how irq affinity is setup in setup_ioapic_dest() from using the core helper function to unconditionally calling the irq_set_affinity() callback of the underlying irq chip. That results in a NULL pointer dereference for the rare case where the underlying irq chip is lapic_chip which has no irq_set_affinity() callback. lapic_chip is occasionally used for the timer interrupt (irq 0). The fix is simple: Check the availability of the callback instead of calling it unconditionally. Fixes: 4857c91f "x86/ioapic: Force affinity setting in setup_ioapic_dest()" Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kővágó, Zoltán authored
commit 8a53554e upstream. When multiple GOP devices exists, but none of them implements ConOut, the code should just choose the first GOP (according to the comments). But currently 'fb_base' will refer to the last GOP, while other parameters to the first GOP, which will likely result in a garbled display. I can reliably reproduce this bug using my ASRock Z87M Extreme4 motherboard with CSM and integrated GPU disabled, and two PCIe video cards (NVidia GT640 and GTX980), booting from efi-stub (booting from grub works fine). On the primary display the ASRock logo remains and on the secondary screen it is garbled up completely. Signed-off-by:
Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
