- 01 Dec, 2010 2 commits
-
-
Eric Dumazet authored
Allocate qdisc memory according to NUMA properties of cpus included in xps map. To be effective, qdisc should be (re)setup after changes of /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus I added a numa_node field in struct netdev_queue, containing NUMA node if all cpus included in xps_cpus share same node, else -1. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
NIC partitioning is another flavor of multi function - having few PCI functions share the same physical port. Unlike the currently supported mode of multi-function which depends on the switch configuration and uses outer-VLAN, the NPAR mode is switch independent and uses the MAC addresses to distribute incoming packets to the different functions. This patch adds the specific HW setting of the NPAR mode and some distinctions between switch dependent (SD) and switch independent (SI) multi-function (MF) modes where the configuration is not the same. Advance driver version to 1.60.00-6 Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
- 30 Nov, 2010 8 commits
-
-
David S. Miller authored
Then we can make a completely generic tcp_remember_stamp() that uses ->get_peer() as a helper, minimizing the AF specific code and minimizing the eventual code duplication when we implement the ipv6 side of TW recycling. Signed-off-by: -
David S. Miller authored
They are only allowed on cached ipv6 routes. Signed-off-by: -
David S. Miller authored
Now that all of the infrastructure is in place, we can add the ipv6 shorthand for peer creation. Signed-off-by: -
David S. Miller authored
Add the ipv6 peer tree instance, and adapt remaining direct references to 'v4_peers' as needed. Signed-off-by: -
David S. Miller authored
Now v4 and v6 addresses will both work properly. Signed-off-by: -
David S. Miller authored
And make an inet_getpeer_v4() helper, update callers. Signed-off-by: -
David S. Miller authored
Currently only the v4 aspect is used, but this will change. Signed-off-by: -
David S. Miller authored
Instead of directly accessing "peer", change to code to operate using a "struct inet_peer_base *" pointer. This will facilitate the addition of a seperate tree for ipv6 peer entries. Signed-off-by:
-
- 29 Nov, 2010 30 commits
-
-
Joe Perches authored
Use the normal debugging functions. Print mac address when using random_ether_addr. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
These were probably just for initial driver debugging and have not been enabled in builds in git history. Signed-off-by:
-
Joe Perches authored
Use vsprintf extension %pM for a mac address in one instance. Signed-off-by:
-
Joe Perches authored
Neaten the phy_init function by adding and calling vendor specific functions. object size is reduced by ~1kb: $ size drivers/net/forcedeth.o.* text data bss dec hex filename 83475 1848 19304 104627 198b3 drivers/net/forcedeth.o.new 84459 1848 19544 105851 19d7b drivers/net/forcedeth.o.old Signed-off-by:
-
Joe Perches authored
Deduplicate the code use for the init/reset of this device. Signed-off-by:
-
Joe Perches authored
Use netdev_<level> when a struct net_device * is available. Signed-off-by:
-
Joe Perches authored
Convert printks to pr_<level>. Remove "forcedeth: " from some calls as it's now added by pr_fmt. Signed-off-by:
-
Joe Perches authored
The remaining dprintk uses are emitted as KERN_INFO. Change these dprintk uses to netdev_dbg. Remove the now unused dprintk macros. Signed-off-by:
-
Joe Perches authored
Use the standard code to emit hex dumps. Signed-off-by:
-
Joe Perches authored
Use the more standard macro to preface netdev->name. Fix casting on resource use. Signed-off-by:
-
Joe Perches authored
Move the printk out of reg_delay and make the callers emit a message on error. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
Eric Dumazet authored
Avoid sparse warnings : add __rcu annotations and use rcu_dereference_protected() where necessary. Signed-off-by:
-
Eric Dumazet authored
store_xps_map() allocates maps that are used by single cpu, it makes sense to use NUMA allocations. Signed-off-by:
-
Shan Wei authored
1. SCTP_CMD_NUM_VERBS,SCTP_CMD_MAX These two macros have never been used for several years since v2.6.12-rc2. 2.sctp_port_rover,sctp_port_alloc_lock The commit 063930 abandoned global variables of port_rover and port_alloc_lock, but still keep two macros to refer to them. So, remove them now. commit 06393009 Author: Stephen Hemminger <shemminger@linux-foundation.org> Date: Wed Oct 10 17:30:18 2007 -0700 [SCTP]: port randomization Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Scott J. Goldman authored
If RSS is disabled, we can ifdef out some RSS specific code. This fixes the compile error found by Randy Dunlap. Signed-off-by:
Scott J. Goldman <scottjg@vmware.com> Reviewed-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
-
Tom Herbert authored
This patch adds XPS_CONFIG option to enable and disable XPS. This is done in the same manner as RPS_CONFIG. This is also fixes build failure in XPS code when SMP is not enabled. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Frank Blaschka authored
The tso hdr is longer then the regular l3 hdr. Fix the calculation of the total len by accounting the size of the tso hdr. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
Device initialization of a qeth device contains a STARTLAN step. This step may fail, if cable is not yet plugged in. The qeth device stays in state HARDSETUP until cable is plugged in. This prevents further preparational initialization steps of the qeth device and its network interface. This patch makes sure initialization of qeth device continues, even though cable is not yet plugged in. Once carrier is available, qeth is notified, triggers a recovery which results in a working network interface. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Sachin Sant authored
Commit 1d7138de igmp: RCU conversion of in_dev->mc_list converted rwlock to RCU. Update the s390 network drivers(qeth & lcs) code to adapt to this change. V2 : Changes based on suggestions given by Eric Dumazet Signed-off-by:
Sachin Sant <sachinp@in.ibm.com> Signed-off-by:
-
Giuseppe Cavallaro authored
The commit to convert to use the dev_pm_ops struct introduces a bug. The shutdown flag is not yet used because the hibernation on memory is done by using the freeze callback. Thanks to Vlad for having reported it. Reported-by:
Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
Szymon Janc <szymon@janc.net.pl> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> and <asm/uaccess.h> as suggested by checkpatch Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
