this is used in only one place now, so just inline it into the caller.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

An option was added to control whether reflink support was on or off
because for a long time, reflink + inline data extent support was
missing - but that's since been fixed, so we can drop the option now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In the read path, for retry of indirect extents to work we need to
differentiate between the location in the btree the read was for, vs.
the location where we found the data. This patch adds that plumbing to
bch_read_bio.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Minor cleanup, it was being open coded.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_btree_iter_traverse() is supposed to ensure we have the correct
type of lock - it was downgrading if necessary, but if we entered with a
read lock it wasn't upgrading to an intent lock, oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Since we added iter->real_pos, btree_iter_set_pos_to_(next|prev)_leaf no
longer modify iter->pos, so we don't have to save it at the start
anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The bkey compat code wasn't being run for btree roots in the superblock
clean section - this patch fixes it to use the journal entry validate
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Previously, bpos_diff() did not handle borrows correctly. Minor thing
considering how it was used, but worth fixing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

New helper to clean things up a bit - also, improve iter->flags
handling.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The transaction update/commit path cares about whether it's inserting
extents or regular keys; extents require extra passes (handling of
overlapping extents) but sometimes we want to skip all that. This
clarifies things by adding a new member to btree_insert_entry specifying
whether the key being inserted is an extent, instead of overloading
BTREE_ITER_IS_EXTENTS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Snapshots are going to need a different whiteout key type. Also, switch
to using BCH_BKEY_TYPES() to define the bkey value accessors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

KEY_TYPE_discard used to be used for extent whiteouts, but when handling
over overlapping extents was lifted above the core btree code it became
unused. This patch updates various code to reflect that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs has been aggressively migrating filesystems and btree nodes to
the new format for quite some time - this shouldn't affect anyone
anymore, and lets us delete a _lot_ of code. Also, it frees up
KEY_TYPE_discard for a new whiteout key type for snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It was counting nodes on the freed list that it skips - because we want
to leave a few so that btree splits don't touch the allocator - as nodes
that it touched, meaning that if it was called with <= 3 nodes to
reclaim, and those nodes were on the freed list, it would never do any
work.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This allocation is required for filesystem operations to make forward
progress, thus needs a mempool.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Especially in userspace, we sometime run into resource exhaustion issues
with starting up threads after mark and sweep/fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a regression from the patch
  bcachefs: Fix copygc dying on startup

In general only the allocator thread itself should be updating
ca->allocator_state, the thread waking up the allocator setting it is an
ugly hack only needed to avoid racing with the copygc threads when we're
first starting up.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We have a separate mechanism for ratelimiting copygc now - the pd
controller has only been causing problems.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Currently debugging an issue with copygc not running when it's supposed
to, and this is an obvious first step.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Awhile back the meaning of is_available_bucket() and thus also
bch_dev_usage->buckets_unavailable changed to include buckets that are
owned by the allocator - this was so that the stat could be persisted
like other allocation information, and wouldn't have to be regenerated
by walking each bucket at mount time.

This broke copygc, which needs to consider buckets that are reclaimable
and haven't yet been grabbed by the allocator thread and moved onta
freelist. This patch fixes that by adding dev_buckets_reclaimable() for
copygc and the allocator thread, and cleans up some of the callers a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If a ptr gen doesn't match the bucket gen, the bucket likely doesn't
contain the data we want - but it's still possible the data we want
might have been overwritten, and for btree node pointers we can verify
whether or not the node is the one we wanted with the node's sequence
number, so it's better to keep the pointer and try reading from it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_check_fix_ptrs() can update/reallocate k
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is useful for the filesystem dump debugging tool - when we're
hitting bugs we want to skip as much of the recovery process as
possible, and the dump tool only needs to know where metadata lives.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If a given set of replicas is entirely on failed devices, don't fail the
mount: we will still fail the mount if we have some copies on non failed
devices.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is just a band-aid fix for now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is to generate strings for them, so that we can print them out.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>