- 18 Oct, 2021 5 commits
-
-
Ahmed S. Darwish authored
Allow to directly set a u64_stats_t value which is used to provide an init function which sets it directly to zero intead of memset() the value. Add u64_stats_set() to the u64_stats API. [bigeasy: commit message. ] Signed-off-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
The gnet_stats_queue::qlen member is only used in the SMP-case. qdisc_qstats_qlen_backlog() needs to add qdisc_qlen() to qstats.qlen to have the same value as that provided by qdisc_qlen_sum(). gnet_stats_copy_queue() needs to overwritte the resulting qstats.qlen field whith the caller submitted qlen value. It might be differ from the submitted value. Let both functions use gnet_stats_add_queue() and remove unused __gnet_stats_copy_queue(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
gnet_stats_add_basic() and gnet_stats_add_queue() add up the statistics so they can be used directly for both the per-CPU and global case. gnet_stats_add_queue() copies either Qdisc's per-CPU gnet_stats_queue::qlen or the global member. The global gnet_stats_queue::qlen isn't touched in the per-CPU case so there is no need to consider it in the global-case. In the per-CPU case, the sum of global gnet_stats_queue::qlen and the per-CPU gnet_stats_queue::qlen was assigned to sch->q.qlen and sch->qstats.qlen. Now both fields are copied individually. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This function will replace __gnet_stats_copy_queue(). It reads all arguments and adds them into the passed gnet_stats_queue argument. In contrast to __gnet_stats_copy_queue() it also copies the qlen member. Signed-off-by:
-
Sebastian Andrzej Siewior authored
__gnet_stats_copy_basic() always assigns the value to the bstats argument overwriting the previous value. The later added per-CPU version always accumulated the values in the returning gnet_stats_basic_packed argument. Based on review there are five users of that function as of today: - est_fetch_counters(), ___gnet_stats_copy_basic() memsets() bstats to zero, single invocation. - mq_dump(), mqprio_dump(), mqprio_dump_class_stats() memsets() bstats to zero, multiple invocation but does not use the function due to !qdisc_is_percpu_stats(). Add the values in __gnet_stats_copy_basic() instead overwriting. Rename the function to gnet_stats_add_basic() to make it more obvious. Signed-off-by:
-
- 16 Oct, 2021 35 commits
-
-
Kyungrok Chung authored
Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by:
Kyungrok Chung <acadx0@gmail.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: introduce SMC-Rv2 support Please apply the following patch series for smc to netdev's net-next tree. SMC-Rv2 support (see https://www.ibm.com/support/pages/node/6326337) provides routable RoCE support for SMC-R, eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of the RoCE adapter hardware. v2: resend of the v1 patch series, and CC linux-rdma this time v3: rebase after net tree was merged into net-next ==================== Signed-off-by:
-
Karsten Graul authored
With SMC-Rv2 the GID is an IP address that can be deleted from the device. When an IB_EVENT_GID_CHANGE event is provided then iterate over all active links and check if their GID is still defined. Otherwise stop the affected link. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
Implement the netlink support for SMC-Rv2 related attributes that are provided to user space. Signed-off-by:
-
Karsten Graul authored
Add support for large v2 LLC control messages in smc_llc.c. The new large work request buffer allows to combine control messages into one packet that had to be spread over several packets before. Add handling of the new v2 LLC messages. Signed-off-by:
-
Karsten Graul authored
In the work request layer define one large v2 buffer for each link group that is used to transmit and receive large LLC control messages. Add the completion queue handling for this buffer. Signed-off-by:
-
Karsten Graul authored
In smc_ib.c, scan for RoCE devices that support UDP encapsulation. Find an eligible device and check that there is a route to the remote peer. Signed-off-by:
-
Karsten Graul authored
The CLC decline message changed with SMC-Rv2 and supports up to 4 additional diagnosis codes. Signed-off-by:
-
Karsten Graul authored
Implement the server side of the SMC-Rv2 processing. Process incoming CLC messages, find eligible devices and check for a valid route to the remote peer. Signed-off-by:
-
Karsten Graul authored
Send a CLC proposal message, and the remote side process this type of message and determine the target GID. Check for a valid route to this GID, and complete the connection establishment. Signed-off-by:
-
Karsten Graul authored
Prepare the connection establishment with SMC-Rv2. Detect eligible RoCE cards and indicate all supported SMC modes for the connection. Signed-off-by:
-
Karsten Graul authored
The struct smc_init_info grew over time, its time to save space on stack and allocate this struct dynamically. Signed-off-by:
-
Jakub Kicinski authored
sk_stream_kill_queues() can be called on close when there are still outstanding skbs to transmit. Those skbs may try to queue notifications to the error queue (e.g. timestamps). If sk_stream_kill_queues() purges the queue without taking its lock the queue may get corrupted, and skbs leaked. This shows up as a warning about an rmem leak: WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x... The leak is always a multiple of 0x300 bytes (the value is in %rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of an empty sk_buff. Indeed if we dump the socket state at the time of the warning the sk_error_queue is often (but not always) corrupted. The ->next pointer points back at the list head, but not the ->prev pointer. Indeed we can find the leaked skb by scanning the kernel memory for something that looks like an skb with ->sk = socket in question, and ->truesize = 0x300. The contents of ->cb[] of the skb confirms the suspicion that it is indeed a timestamp notification (as generated in __skb_complete_tx_timestamp()). Removing purging of sk_error_queue should be okay, since inet_sock_destruct() does it again once all socket refs are gone. Eric suggests this may cause sockets that go thru disconnect() to maintain notifications from the previous incarnations of the socket, but that should be okay since the race was there anyway, and disconnect() is not exactly dependable. Thanks to Jonathan Lemon and Omar Sandoval for help at various stages of tracing the issue. Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethernet: manual netdev->dev_addr conversions (part 1) Manual conversions of drivers writing directly to netdev->dev_addr (part 1 out of 3). ==================== Signed-off-by: -
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). ixgb_get_ee_mac_addr() is used with a non-nevdev->dev_addr pointer so we can't deal with the problem inside it. Signed-off-by:
-
Jakub Kicinski authored
We'll want to make netdev->dev_addr const, remove the local helper which is missing a const qualifier on the argument and use ether_addr_to_u64(). Similar story to mlx4. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Pass a netdev into the helper instead of just the address, read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Copy the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use a zero'ed array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use an array on the stack, then call eth_hw_addr_set(). eth_hw_addr_set() is after error checking, this should be fine, error propagates all the way to failing probe. Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address apart into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. macaddr[] is a module param, and int, so copy the address into an array of u8 on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jean Sacren authored
The last argument of device_create() call should be a template string. The tap_name variable should be the argument to the string, but not the argument of the call itself. We should add the template string and turn tap_name into its argument. Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Signed-off-by:
-
Jean Sacren authored
The last argument of device_create() call should be a template string. The tap_name variable should be the argument to the string, but not the argument of the call itself. We should add the template string and turn tap_name into its argument. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-10-15 1) From Rongwei Liu: Use system_image_guid and native_port_num when bonding. Don't relay on PCIe ids anymore. With some specific NIC, the physical devices may have PCIe IDs like 0001:01:00.0/1 and 0002:02:00.0/1. All of these devices should have the same system_image_guid and device index can be queried from native_port_num. For matching sibling devices/port of the same HCA, compare the HCA GUID reported on each device rather than just assuming PCIe ids have similar attributes. 2) From Amir Tzin: Use HCA defined Timouts Replace hard coded timeouts with values stored by firmware in default timeouts register (DTOR). Timeouts are read during driver load. If DTOR is not supported by firmware then fallback to hard coded defaults instead. 3) From Shay Drory: Disable roce at HCA level Disable RoCE in Firmware when devlink roce parameter is set to off. 4) A small set of trivial cleanups ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-14 Maciej Machnikowski says: Extend the driver implementation to support PTP pins on E810-T and derivative devices. E810-T adapters are equipped with: - 2 external bidirectional SMA connectors - 1 internal TX U.FL shared with SMA1 - 1 internal RX U.FL shared with SMA2 The SMA and U.FL configuration is controlled by the external multiplexer. E810-T Derivatives are equipped with: - 2 1PPS outputs on SDP20 and SDP22 - 2 1PPS inputs on SDP21 and SDP23 --- v2: - Remove defensive programming check and simplify return statement (Patch 3) - Remove unnecessary parentheses (Patch 4) ==================== Signed-off-by: -
David S. Miller authored
Mat Martineau says: ==================== mptcp: A few fixes This set has three separate changes for the net-next tree: Patch 1 guarantees safe handling and a warning if a NULL value is encountered when gathering subflow data for the MPTCP_SUBFLOW_ADDRS socket option. Patch 2 increases the default number of subflows allowed per MPTCP connection. Patch 3 makes an existing function 'static'. ==================== Signed-off-by: -
Mat Martineau authored
This function is only used within pm_netlink.c now. Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support") Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
The current default does not allowing additional subflows, mostly as a safety restriction to avoid uncontrolled resource consumption on busy servers. Still the system admin and/or the application have to opt-in to MPTCP explicitly. After that, they need to change (increase) the default maximum number of additional subflows. Let set that to reasonable default, and make end-users life easier. Additionally we need to update some self-tests accordingly. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Tim Gardner authored
Coverity complains of a possible NULL dereference in mptcp_getsockopt_subflow_addrs(): 861 } else if (sk->sk_family == AF_INET6) { 3. returned_null: inet6_sk returns NULL. [show details] 4. var_assigned: Assigning: np = NULL return value from inet6_sk. 862 const struct ipv6_pinfo *np = inet6_sk(sk); Fix this by checking for NULL. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/231 Fixes: c11c5906 ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Cc: Florian Westphal <fw@strlen.de> Signed-off-by:Tim Gardner <tim.gardner@canonical.com> [mjm: Added WARN_ON_ONCE() to the unexpected case] Signed-off-by:
-
Rongwei Liu authored
With specific NICs, the PFs may have different PCIe ids like 0001:01:00.0/1 and 0002:02:00:00/1. For PFs with the same system_image_guid, driver should consider them under the same physical NIC and they are legal to bond together. If firmware doesn't support system_image_guid, set it to zero and fallback to use PCIe ids. Signed-off-by:
Rongwei Liu <rongweil@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
