The analog input subdevice support functions in hwdrv_apci3xxx.c
do not follow the comedi API.

The (*insn_config) function overrides the INSN_CONFIG_DIO_INPUT
instruction as an internal APCI3XXX_CONFIGURATION instruction. The
APCI3XXX_CONFIGURATION instruction requires 4 data parameters but
the comedi core sanity checks the INSN_CONFIG_DIO_INPUT instruction
which only has 1 data parameter. Because of this the (*insn_config)
function can never be called.

The (*insn_read) function is supposed to do "one-shot" or "software-
triggered" reads and return the data. The function in hwdrv_apci3xxx.c
does do this but it also is used to optionally start a "hardware-
triggered" conversion. Hardware-triggered conversions should be done
with the comedi_async command functions.

Delete the hwrdv_apci3xxx.c file and fix the analog input subdevice
in the driver by:

1) add a new (*insn_read) function for "one-shot" reads
2) implement the (*do_cmdtest) and (*do_cmd) functions for
   "hardware-triggered" asyncronous reads
3) fix the interrupt handler to return the read data via the
   comedi_async buffer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input subdevice in this driver is broken. The attach of
this driver requests the irq and sets the dev->read_subdev to the
analog input subdevice but it does not setup the subdevice to support
commands.

Stub in the command support functions so we can fix the subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasnons, add some whitespace to the analog input
subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog reference desired for the acquisition is stored in the
insn->chanspec that is passed to the (*insn_read) function. There is
no need to use a private data variable to hold the desired analog
reference that is set in the (*insn_config).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The number of differential analog input channels is always half the
number of single-ended channels, 'ai_n_chan', or all the channels
if the board does not support single-ended channels. We can use the
'ai_subdev_flags' boardinfo to determine if the board does not support
single-ended channels.

To simplify the boardinfo, remove the 'i_NbrAiChannelDiff' and just
use 'ai_n_chan' to specify the number of channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase boardinfo variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase boardinfo variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This boardinfo defines the conversion time bases that the analog input
subdevice supports (ns, us, ms).

Add some defines to get rid of the magic numbers and clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input subdevice is broken in this driver. To help fix
it, tidy up this (*insn_config) helper function.

Rename the CamelCase function and all the CamelCase local variables.

Refactor the sanity checks to make the function a bit more concise
and remove the printk noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input subdevice is broken in this driver. To help fix
it, tidy up this (*insn_config) function.

Rename the CamelCase function.

Move the (insn->n == 4) test from i_APCI3XXX_AnalogInputConfigOperatingMode()
to this function.

Make the function a bit more concise and remove the printk noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver only have differential
analog inputs. Add a new boardinfo, 'ai_subdev_flags', to allow
properly setting the subdev_flags for the analog input subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase boardinfo. Also, change its type to match
the type of comedi_subdevice 'maxdata'.

For aesthetic reasons, change the values to hex since this is more
common for the 'maxdata' values in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input s->len_chanlist for the boards supported by this driver
should always be the number of channels (s->n_chan). Use that instead
and remove the 'i_AiChannelList' from the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt function should be using comedi_event() to let the user
know data is available from the analog input subdevice.

The analog input subdevice is currently broken and nothing sets
tsk_Current anyway so just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable holds the ioremap'ed PCI bar 3 used to read/write the
analog input and output registers. Rename it to simply 'mmio'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The private data 'iobase' is the same as the comedi_device 'iobase'.
Use the one in the comedi_device instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input subdevice in this driver is broken. It abuses the
comedi API and will not work as-is. Start cleaning it up so it can
be fixed.

Rename the CamelCase function and the local variables.

Refactor the function to remove the indents. Most of the indents are
left over from the previous patches.

Invert the early tests to provide a quick exit from the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core validates the insn->chanspec channel and range before
calling the subdevice (*insn_read) function.

Remove the unnecessary sanity checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is set during the attach of the board and never cleared
so the test in i_APCI3XXX_InsnReadAnalogInput() will always succeed.
Just remove the variable to help with cleaning up this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, the subdevice functions used to configure and read/write the
ttl digital i/o ports is way over to complicated. The (*insn_config)
function also abuses the comedi API by overriding the instruction
command passed in data[0].

Fix the ttl digital i/o support to work like the comedi core expects.

The (*insn_config) function supports the three instructions common for
COMEDI_SUBD_DIO subdevices:

    INSN_CONFIG_DIO_INPUT - configure the specified channel as input
    INSN_CONFIG_DIO_OUTPUT - configure the specified channel as output
    INSN_CONFIG_DIO_QUERY - returns the status of the specified channel

    Port 0 (channels 0-7) is always input
    Port 1 (channels 8-15) is always output
    Port 2 (channels 9-23) are programmable i/o (all channels are input or output)

The (*insn_bits) function allows writing to the output channels and returns
the state of all channels.

The (*insn_read) and (*insn_write) functions are not required. The comedi
core will emulate them using the (*insn_bits) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase function and absorb it from hwdrv_apci3xxx.c
directly into the driver.

Tidy up the analog output subdevice init by adding some whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards that have analog outputs always have 4 channels.

Remove the 'i_NbrAoChannel' data from the boardinfo and add a bit
field to indicate that the board 'has_ao'. Use that to conditionally
initialize the subdevice and open code the s->n_chan value of 4.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the CamelCase local variables.

The comedi core validates the insn->chanspec to make sure the channel
number and range are valid for the subdevice. The extra checks in this
function are not required.

(*insn_write) functions are supposed to write all the data passed
in the data pointer (insn->n values) then return the number of data
values written of an errno. Fix this function to work like the core
expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, add some whitespace to the initialization of the
ttl digital i/o subdevices.

Fix the subdev_flags for the subdevice. The SDF_GROUND and SDF_COMMON
flags only apply to analog subdevices.

Fix the s->iobits for the subdevice. According to the datasheet:
	Port 0 (channels 0-7) are always outputs
	Port 1 (channels 8-15) are always inputs
	Port 2 (channels 9-23) are programmable i/o (default to inputs)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, add some whitespace to the initialization of the
digital input and output subdevices.

Fix the subdev_flags for both subdevices. The SDF_GROUND and SDF_COMMON
flags only apply to analog subdevices. Digital output subdevices do not
need the SDF_READABLE flag set.

Remove the initialization of s->io_bits. It only has meaning for
COMEDI_SUBD_DIO subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards that have analog outputs always have 12-bit resolution.

Remove the 'i_AoMaxdata' data from the boardinfo and open code the
s->maxdata. Use the hex value for the resolution since that is more
common in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards that have ttl input and output channels always have 24
channels.

Remove the 'i_NbrTTLChannel' data from the boardinfo and add a bit
field to indicate that the board 'has_ttl_io'. Use that to conditionally
initialize the subdevice and open code the s->n_chan value of 24.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards that have digital input and output channels always have
4 inputs and 4 outputs.

Remove the 'i_NbrD[io]Channel' data from the boardinfo and add two
bit fields to indicate that the board 'has_dig_in' and 'has_dig_out'.
Use those to conditionally initialize the subdevices and open code
the s->n_chan value of 4 for both subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This data in the boardinfo is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the copyright information from hwdrv_apci3xxx.c to the actual
driver, addi_apci_3xxx.c.

Reformat the information to follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not use anything provided by these includes.
Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver abuses the enum comedi_subdevice_type by redefining
enum 11 - COMEDI_SUBD_SERIAL as COMEDI_SUBD_TTLIO. The subdevice
that uses COMEDI_SUBD_TTLIO is a TTL Digital Input/Output subdevice.

Remove COMEDI_SUBD_TTLIO and just use COMEDI_SUBD_DIO as the
subdevice type.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct addi_private definition from the addi-data "common" code is
very bloated. Introduce a local struct apci3xxx_private that just has
the data needed by this driver.

Add a couple includes that this driver depends on and remove the include
of "addi-data/addi_common.h" since this driver no longer depends on it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct addi_board definition from the addi-data "common" code is
very bloated. Introduce a private struct apci3xxx_boardinfo that just
has the data needed by this driver.

Move the #include "addi-data/hwdrv_apci3xxx.c" so it will have the new
struct definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The same subdevice callbacks are used by all the boards supported by
this driver. Remove the information from the boardinfo and initialize
the subdevices directly.

Remove the callback initializations that are always = NULL.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver do not have an eeprom. Remove the
need for the devpriv->s_EeParameters values by just using the values
from the boardinfo directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Digital output subdevices always have a 'maxdata' of '1'. Remove the
'i_DoMaxData' boardinfo and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>