- 03 May, 2024 18 commits
-
-
Jakub Kicinski authored
Eric Dumazet says: ==================== rtnetlink: rtnl_stats_dump() changes Getting rid of RTNL in rtnl_stats_dump() looks challenging. In the meantime, we can: 1) Avoid RTNL acquisition for the final NLMSG_DONE marker. 2) Use for_each_netdev_dump() instead of the net->dev_index_head[] hash table. ==================== Link: https://lore.kernel.org/r/20240502113748.1622637-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Switch rtnl_stats_dump() to use for_each_netdev_dump() instead of net->dev_index_head[] hash table. This makes the code much easier to read, and fixes scalability issues. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240502113748.1622637-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
By returning 0 (or an error) instead of skb->len, we allow NLMSG_DONE to be appended to the current skb at the end of a dump, saving a couple of recvmsg() system calls. Signed-off-by:
-
David S. Miller authored
Joel Granados says: ==================== sysctl: Remove sentinel elements from networking What? These commits remove the sentinel element (last empty element) from the sysctl arrays of all the files under the "net/" directory that register a sysctl array. The merging of the preparation patches [4] to mainline allows us to just remove sentinel elements without changing behavior. This is safe because the sysctl registration code (register_sysctl() and friends) use the array size in addition to checking for a sentinel [1]. Why? By removing the sysctl sentinel elements we avoid kernel bloat as ctl_table arrays get moved out of kernel/sysctl.c into their own respective subsystems. This move was started long ago to avoid merge conflicts; the sentinel removal bit came after Mathew Wilcox suggested it to avoid bloating the kernel by one element as arrays moved out. This patchset will reduce the overall build time size of the kernel and run time memory bloat by about ~64 bytes per declared ctl_table array (more info here [5]). When are we done? There are 4 patchest (25 commits [2]) that are still outstanding to completely remove the sentinels: files under "net/" (this patchset), files under "kernel/" dir, misc dirs (files under mm/ security/ and others) and the final set that removes the unneeded check for ->procname == NULL. Testing: * Ran sysctl selftests (./tools/testing/selftests/sysctl/sysctl.sh) * Ran this through 0-day with no errors or warnings Savings in vmlinux: A total of 64 bytes per sentinel is saved after removal; I measured in x86_64 to give an idea of the aggregated savings. The actual savings will depend on individual kernel configuration. * bloat-o-meter - The "yesall" config saves 3976 bytes (bloat-o-meter output [6]) - A reduced config [3] saves 1263 bytes (bloat-o-meter output [7]) Savings in allocated memory: None in this set but will occur when the superfluous allocations are removed from proc_sysctl.c. I include it here for context. The estimated savings during boot for config [3] are 6272 bytes. See [8] for how to measure it. Comments/feedback greatly appreciated Changes in v6: - Rebased onto net-next/main. - Besides re-running my cocci scripts, I ran a new find script [9]. Found 0 hits in net/ - Moved "i" variable declaraction out of for() in sysctl_core_net_init - Removed forgotten sentinel in mpls_table - Removed CONFIG_AX25_DAMA_SLAVE guard from net/ax25/ax25_ds_timer.c. It is not needed because that file is compiled only when CONFIG_AX25_DAMA_SLAVE is set. - When traversing smc_table, stop on ARRAY_SIZE instead of ARRAY_SIZE-1. - Link to v5: https://lore.kernel.org/r/20240426-jag-sysctl_remset_net-v5-0-e3b12f6111a6@samsung.com Changes in v5: - Added net files with additional variable to my test .config so the typo can be caught next time. - Fixed typo tabel_size -> table_size - Link to v4: https://lore.kernel.org/r/20240425-jag-sysctl_remset_net-v4-0-9e82f985777d@samsung.com Changes in v4: - Keep reverse xmas tree order when introducing new variables - Use a table_size variable to keep the value of ARRAY_SIZE - Separated the original "networking: Remove the now superfluous sentinel elements from ctl_table arra" into smaller commits to ease review - Merged x.25 and ax.25 commits together. - Removed any SOB from the commits that were changed - Link to v3: https://lore.kernel.org/r/20240412-jag-sysctl_remset_net-v3-0-11187d13c211@samsung.com Changes in v3: - Reworkded ax.25 - Added a BUILD_BUG_ON for the ax.25 commit - Added a CONFIG_AX25_DAMA_SLAVE guard where needed - Link to v2: https://lore.kernel.org/r/20240328-jag-sysctl_remset_net-v2-0-52c9fad9a1af@samsung.com Changes in v2: - Rebased to v6.9-rc1 - Removed unneeded comment from sysctl_net_ax25.c - Link to v1: https://lore.kernel.org/r/20240314-jag-sysctl_remset_net-v1-0-aa26b44d29d9@samsung.com ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Avoid a buffer overflow when traversing the ctl_table by ensuring that AX25_MAX_VALUES is the same as the size of ax25_param_table. This is done with a BUILD_BUG_ON where ax25_param_table is defined and a CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as in the ax25_dev_device_up and ax25_ds_set_timer functions. The overflow happened when the sentinel was removed from ax25_param_table. The sentinel's data element was changed when CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it still stopped on the sentinel's null procname but needed to be addressed once the sentinel was removed. Signed-off-by:
Joel Granados <j.granados@samsung.com> Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from atalk_table ctl_table array. Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel elements from ctl_table structs * Remove instances where an array element is zeroed out to make it look like a sentinel. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration * Remove the need for having __NF_SYSCTL_CT_LAST_SYSCTL as the sysctl array size is now in NF_SYSCTL_CT_LAST_SYSCTL * Remove extra element in ctl_table arrays declarations Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) To avoid lots of small commits, this commit brings together network changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and NETWORKING [IPSEC] * Remove sentinel element from ctl_table structs. * Replace empty array registration with the register_net_sysctl_sz call in llc_sysctl_init * Replace the for loop stop condition that tests for procname == NULL with one that depends on array size in sctp_sysctl_net_register * Remove instances where an array element is zeroed out to make it look like a sentinel in xfrm_sysctl_init. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Remove extra sentinel element in the declaration of devinet_vars. * Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init, ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having an extra empty element when looping over ctl_table arrays * Replace the for loop stop condition in __addrconf_sysctl_register that tests for procname == NULL with one that depends on array size * Removing the unprivileged user check in ipv6_route_sysctl_init is safe as it is replaced by calling ipv6_route_sysctl_table_size; introduced in commit c899710f ("networking: Update to register_net_sysctl_sz") * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in neigh_sysctl_register and lowpan_frags_ns_sysctl_register This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Replace the for loop stop condition in sysctl_core_net_init that tests for procname == NULL with one that depends on array size * Removed the "-1" in mpls_net_init that adjusted for having an extra empty element when looping over ctl_table arrays * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Eric Dumazet authored
sfq_perturbation() reads q->perturb_period locklessly. Add annotations to fix potential issues. Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430180015.3111398-1-edumazet@google.comSigned-off-by:
-
Simon Horman authored
Since commit a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Willem de Bruijn authored
Detect packets with ip_summed CHECKSUM_PARTIAL and skip these. These should not exist, as the test sends individual packets between two hosts. But if (HW) GRO is on, with randomized content sometimes subsequent packets can be coalesced. In this case the GSO packet checksum is converted to a pseudo checksum in anticipation of sending out as TSO/USO. So the field will not match the expected value. Do not count these as test errors. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240501193156.3627344-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Jakub Kicinski authored
We're a bit too loose with error checking for background processes. cmd() completely ignores the fail argument passed to the constructor if background is True. Default to checking for errors if process is not terminated explicitly. Caller can override with True / False. For bkg() the processing step is called magically by __exit__ so record the value passed in the constructor. Reported-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct hfi1_netdev_rx by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at hfi1_alloc_rx(). [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Acked-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
Leon Romanovsky <leon@kernel.org> Link: https://lore.kernel.org/r/20240430162213.746492-1-leitao@debian.orgSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Use flow_rule_is_supp_control_flags() to reject filters with unsupported control flags. In case any unsupported control flags are masked, flow_rule_is_supp_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Remove FLOW_DIS_FIRST_FRAG specific error message, and treat it as any other unsupported control flag. Only compile-tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240422152728.175677-1-ast@fiberby.netSigned-off-by:
-
- 02 May, 2024 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b61 ("bpf: verifier: prevent userspace memory access") d503a04f ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/ No adjacent changes. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ... -
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Updates for net-next The first patch converts the sw_stats field in the completion ring structure to a pointer. This allows the group of completion rings using the same MSIX to share the same sw_stats structure. Prior to this, the correct completion ring must be used to count packets. The next four patches remove the RTNL lock when calling the RoCE driver for asynchronous stop and start during error recovery and firmware reset. The RTNL ilock is replaced with a private mutex used to synchronize RoCE register, unregister, stop, and start. The last patch adds VF PCI IDs for the 5760X chips. v2: Dropped patch #1 from v1. Will work with David to get that patch in separately. ==================== Link: https://lore.kernel.org/r/20240501003056.100607-1-michael.chan@broadcom.comSigned-off-by:
-
Ajit Khaparde authored
No driver logic changes are required to support the VFs, so just add the VF PCI ID. Reviewed-by:
Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Kalesh AP authored
In the error recovery path (AER, firmware recovery, etc), the driver notifies the RoCE driver via ULP_STOP before the reset and via ULP_START after the reset, all under RTNL_LOCK. The RoCE driver can take a long time if there are a lot of QPs to destroy, so it is not ideal to hold the global RTNL lock. Rely on the new en_dev_lock mutex instead for ULP_STOP and ULP_START. For the most part, we move the ULP_STOP call before we take the RTNL lock and move the ULP_START after RTNL unlock. Note that SRIOV re-enablement must be done after ULP_START or RoCE on the VFs will not resume properly after reset. The one scenario in bnxt_hwrm_if_change() where the RTNL lock is already taken in the .ndo_open() context requires the ULP restart to be deferred to the bnxt_sp_task() workqueue. Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Kalesh AP authored
The current scheme relies heavily on the RTNL lock for all ULP operations between the L2 and the RoCE driver. Add a new en_dev_lock mutex so that the asynchronous ULP_STOP and ULP_START operations can be serialized with bnxt_register_dev() and bnxt_unregister_dev() calls without relying on the RTNL lock. The next patch will remove the RTNL lock from the ULP_STOP and ULP_START calls. Reviewed-by:
-
Michael Chan authored
There is no need to call ULP_STOP and ULP_START before and after the L2 reset in bnxt_reset_task(). This L2 reset is done after detecting TX timeout, RX ring errors, or VF config changes. The L2 reset does not affect RoCE since the firmware is not reset and the backing store is left alone. Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
-
Kalesh AP authored
Offline self test is a very disruptive operation for RoCE and requires all active QPs to be destroyed. With a large number of QPs, it can take a long time to destroy all the QPs and can timeout. Do not allow ethtool offline self test if the RoCE driver is registered on the device. Reviewed-by:
-
Edwin Peer authored
On P5_PLUS chips and later, the NQ rings have subrings for RX and TX completions respectively. These subrings are passed to the poll function instead of the base NQ, but each ring carries its own copy of the software ring statistics. For stats to be conveniently accessible in __bnxt_poll_work(), the statistics memory should either be shared between the NQ and its subrings or the subrings need to be included in the ethtool stats aggregation logic. This patch opts for the former, because it's more efficient and less confusing having the software statistics for a ring exist in a single place. Before this patch, the counter will not be displayed if the "wrong" cpr->sw_stats was used to increment a counter. Link: https://lore.kernel.org/netdev/CACKFLikEhVAJA+osD7UjQNotdGte+fth7zOy7yDdLkTyFk9Pyw@mail.gmail.com/Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: cleanups & refactors Ivan Vecera says: This series do following: Patch 1 - Removes write-only flags field from i40e_veb structure and from i40e_veb_setup() parameters Patch 2 - Refactors parameter of i40e_notify_client_of_l2_param_changes() and i40e_notify_client_of_netdev_close() Patch 3 - Refactors parameter of i40e_detect_recover_hung() Patch 4 - Adds helper i40e_pf_get_main_vsi() to get main VSI and uses it in existing code Patch 5 - Consolidates checks whether given VSI is the main one Patch 6 - Adds helper i40e_pf_get_main_veb() to get main VEB and uses it in existing code Patch 7 - Adds helper i40e_vsi_reconfig_tc() to reconfigure TC for particular and uses it to replace existing open-coded pieces * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Add and use helper to reconfigure TC for given VSI i40e: Add helper to access main VEB i40e: Consolidate checks whether given VSI is main i40e: Add helper to access main VSI i40e: Refactor argument of i40e_detect_recover_hung() i40e: Refactor argument of several client notification functions i40e: Remove flags field from i40e_veb ==================== Link: https://lore.kernel.org/r/20240430180639.1938515-1-anthony.l.nguyen@intel.comSigned-off-by: -
Davide Caratti authored
Naresh and Eric report several errors (corrupted elements in the dynamic key hash list), when running tdc.py or syzbot. The error path of qdisc_alloc() and qdisc_create() frees the qdisc memory, but it forgets to unregister the lockdep key, thus causing use-after-free like the following one: ================================================================== BUG: KASAN: slab-use-after-free in lockdep_register_key+0x5f2/0x700 Read of size 8 at addr ffff88811236f2a8 by task ip/7925 CPU: 26 PID: 7925 Comm: ip Kdump: loaded Not tainted 6.9.0-rc2+ #648 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <TASK> dump_stack_lvl+0x7c/0xc0 print_report+0xc9/0x610 kasan_report+0x89/0xc0 lockdep_register_key+0x5f2/0x700 qdisc_alloc+0x21d/0xb60 qdisc_create_dflt+0x63/0x3c0 attach_one_default_qdisc.constprop.37+0x8e/0x170 dev_activate+0x4bd/0xc30 __dev_open+0x275/0x380 __dev_change_flags+0x3f1/0x570 dev_change_flags+0x7c/0x160 do_setlink+0x1ea1/0x34b0 __rtnl_newlink+0x8c9/0x1510 rtnl_newlink+0x61/0x90 rtnetlink_rcv_msg+0x2f0/0xbc0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x420/0x630 netlink_sendmsg+0x732/0xbc0 __sock_sendmsg+0x1ea/0x280 ____sys_sendmsg+0x5a9/0x990 ___sys_sendmsg+0xf1/0x180 __sys_sendmsg+0xd3/0x180 do_syscall_64+0x96/0x180 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7f9503f4fa07 Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007fff6c729068 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000006630c681 RCX: 00007f9503f4fa07 RDX: 0000000000000000 RSI: 00007fff6c7290d0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000078 R10: 000000000000009b R11: 0000000000000246 R12: 0000000000000001 R13: 00007fff6c729180 R14: 0000000000000000 R15: 000055bf67dd9040 </TASK> Allocated by task 7745: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_node+0x1ff/0x460 qdisc_alloc+0xae/0xb60 qdisc_create+0xdd/0xfb0 tc_modify_qdisc+0x37e/0x1960 rtnetlink_rcv_msg+0x2f0/0xbc0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x420/0x630 netlink_sendmsg+0x732/0xbc0 __sock_sendmsg+0x1ea/0x280 ____sys_sendmsg+0x5a9/0x990 ___sys_sendmsg+0xf1/0x180 __sys_sendmsg+0xd3/0x180 do_syscall_64+0x96/0x180 entry_SYSCALL_64_after_hwframe+0x71/0x79 Freed by task 7745: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x36/0x60 __kasan_slab_free+0xfe/0x180 kfree+0x113/0x380 qdisc_create+0xafb/0xfb0 tc_modify_qdisc+0x37e/0x1960 rtnetlink_rcv_msg+0x2f0/0xbc0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x420/0x630 netlink_sendmsg+0x732/0xbc0 __sock_sendmsg+0x1ea/0x280 ____sys_sendmsg+0x5a9/0x990 ___sys_sendmsg+0xf1/0x180 __sys_sendmsg+0xd3/0x180 do_syscall_64+0x96/0x180 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this ensuring that lockdep_unregister_key() is called before the qdisc struct is freed, also in the error path of qdisc_create() and qdisc_alloc(). Fixes: af0cb3fa ("net/sched: fix false lockdep warning on qdisc root lock") Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/netdev/20240429221706.1492418-1-naresh.kamboju@linaro.org/Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by:
-
Jakub Kicinski authored
Chris's email address bounces and lore hasn't seen an email from anyone with his name for almost a decade. Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
aelior@marvell.com bounces, we haven't seen Ariel on lore since March 2022. Signed-off-by:
-
Paolo Abeni authored
Richard Gobert says: ==================== net: gro: add flush/flush_id checks and fix wrong offset in udp This series fixes a bug in the complete phase of UDP in GRO, in which socket lookup fails due to using network_header when parsing encapsulated packets. The fix is to add network_offset and inner_network_offset to napi_gro_cb and use these offsets for socket lookup. In addition p->flush/flush_id should be checked in all UDP flows. The same logic from tcp_gro_receive is applied for all flows in udp_gro_receive_segment. This prevents packets with mismatching network headers (flush/flush_id turned on) from merging in UDP GRO. The original series includes a change to vxlan test which adds the local parameter to prevent similar future bugs. I plan to submit it separately to net-next. This series is part of a previously submitted series to net-next: https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/ v3 -> v4: - Store network offsets, and use them only in udp_gro_complete flows - Correct commit hash used in Fixes tag - v3: https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/ v2 -> v3: - Add network_offsets and fix udp bug in a single commit to make backporting easier - Write to inner_network_offset in {inet,ipv6}_gro_receive - Use network_offsets union in tcp[46]_gro_complete as well - v2: https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/ v1 -> v2: - Use network_offsets instead of p_poff param as suggested by Willem - Check flush before postpull, and for all UDP GRO flows - v1: https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.comSigned-off-by:
-
Richard Gobert authored
GRO-GSO path is supposed to be transparent and as such L3 flush checks are relevant to all UDP flows merging in GRO. This patch uses the same logic and code from tcp_gro_receive, terminating merge if flush is non zero. Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Signed-off-by:
Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
-
Richard Gobert authored
Commits a6024562 ("udp: Add GRO functions to UDP socket") and 57c67ff4 ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a6024562 ("udp: Add GRO functions to UDP socket") Signed-off-by:
-
Shigeru Yoshida authored
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5acae ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.comSigned-off-by:
-
Alexandra Winter authored
Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by:Alexandra Winter <wintera@linux.ibm.com> Reviewed-by:
-
Guillaume Nault authored
Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba46 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Florian Fainelli says: ==================== net: dsa: adjust_link removal Now that the last in-tree driver (b53) has been converted to PHYLINK, we can get rid of all of code that catered to working with drivers implementing only PHYLIB's adjust_link callback. ==================== Link: https://lore.kernel.org/r/20240430164816.2400606-1-florian.fainelli@broadcom.comSigned-off-by:
-
Florian Fainelli authored
Now that we no longer any drivers using PHYLIB's adjust_link callback, remove all paths that made use of adjust_link as well as the associated functions. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240430164816.2400606-3-florian.fainelli@broadcom.comSigned-off-by:
-
Florian Fainelli authored
We have not had a switch driver use a fixed_link_update callback since 58d56fcc ("net: dsa: bcm_sf2: Get rid of PHYLIB functions") remove this callback. Signed-off-by:
-
