The Maxim max77802 Power Management IC is used on many Exynos machines.
Besides a bunch of regulators, this chip has a Real-Time-Clock (RTC)
and 2-channel 32kHz clock outputs.

Enable the kernel config options to have the drivers for these devices
built as a module.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: removing useless REGULATOR_MAX77802 config]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Build the spi-s3c64xx driver as a module to have support for
the SPI controller in several Samsung SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Select ARM_SINGLE_ARMV7M in defconfigs of the converted ARMv7-M
platforms.

[arnd: moved the efm32_defconfig change to the patch that
originally introduces the symbol, to avoid intermittent regression]
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add defconfig for Linux on Vybrid (vf610) on the secondary Cortex-
M4 CPU. The use of a XIP image has been tested which needs to be
loaded (e.g. using the custom m4boot loader) to the end of the
available RAM at address 0x8f000000. The Cortex-M4 has a code-alias
which makes sure that the instructions get fetched through the code
bus (alias starts at 0x00800000 => 0x80800000 in system address).
Hence, to get optimal performance, use 0x0f000000 as XIP_PHYS_ADDR.
This address is additionally shifted by the length of the minimal
loader which is inserted by m4boot. Currently, this offset is 0x80.

The standard DRAM base address is configured to 0x8C000000, which
gives the Cortex-M4 48MiB of RAM.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig

Merge "First batch of defconfig changes for 4.2" from Nicolas Ferre:
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig

* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: multi_v7_defconfig: Add Atmel SAMA5 family
  ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver

Conflicts:
	arch/arm/configs/multi_v7_defconfig

The original stm32 defconfig file looks for a ./rootfs.cpio file,
but that breaks with

  ../scripts/gen_initramfs_list.sh: Cannot open './rootfs.cpio'

when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>

The original zx defconfig file looks for a ./rootfs.cpio file,
but that breaks with

  scripts/gen_initramfs_list.sh: Cannot open 'initramfs.cpio.gz'

when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jun Nie <jun.nie@linaro.org>

Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig.

Note that the console will be ttyAT0 instead of the usual ttyS0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

As an update of the sd/mmc DT definition needs the fixed voltage regulator, add
it to the at91 defconfigs.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch adds a new config for STM32 MCUs.
STM32F429 Discovery board boots successfully with this config applied.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add basic defconfig support to zx SOC, including uart, mmc
 and other common config
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Kernel configuration for NXP LPC18xx and LPC43xx devices.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-defconfig-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Merge "Renesas ARM Based SoC Defconfig Updates for v4.2" from Simon Horman:

* Replace legacy-only USB_RCAR_GEN2_PHY with DT-only PHY_RCAR_GEN2

* tag 'renesas-defconfig-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: defconfig: Replace USB_RCAR_GEN2_PHY by PHY_RCAR_GEN2

Merge tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig

Merge "ARM: tegra: Default configuration updates for v4.2-rc1" from Thierry Reding:

This is a set of changes to the Tegra default configuration that enable
various new features (HDMI audio, watchdog) on Toradex Apalis T30.

* tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Update default configuration

This enables the CoreSight blocks found on the Ux500 SoC
into the Ux500 defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Ux500 has a perfectly working PMU so let's put the perf
events into the defconfig. This will activate HW_PERF_EVENTS
by default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable all drivers under CONFIG_ARM_CRYPTO as modules. Enable
CONFIG_KERNEL_MODE_NEON as well so that the modules that either
contain a NEON alternative or consist solely of a NEON (or ARMv8
crypto extensions) accelerated implementation are enabled fully as
well.

Note that the ARMv8 modules will only be built if the detected
toolchain version is recent enough (binutils 2.23 or higher).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only
PHY_RCAR_GEN2 driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "ARM: HIP04: configure updates for 4.2" from Wei Xu:

- Enable ethernet on hip04 SoC
- Enable Sysnopsis GPIO controller on hip04 SoC

* tag 'hip04-config-for-4.2' of git://github.com/hisilicon/linux-hisi:
  ARM: defconfig: hisi: enable HiSilicon hip04 ethernet controller
  ARM: hip04: add GPIO configure in hisi_defconfig

Add UniPhier, a new citizen in the ARM multi platform.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sti-defconfig-for-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig

Merge "STi defconfig for v4.2, round 1" from Maxime Coquelin:

Highlights:
-----------
 - Enable ST's LPC Watchdog driver
 - Enable ST's LPC RTC driver

* tag 'sti-defconfig-for-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
  ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog

This enables the digicolor drivers that are already merged as
part of the multi_v7_defconfig file.

[arnd: change rtc and i2c to loadable modules]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull drm fixes from Dave Airlie:
 "I really need to get back to sending these on my Friday, instead of my
  Monday morning, but nothing too amazing in here: a few amdkfd fixes, a
  few radeon fixes, i915 fixes, one tegra fix and one core fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
  drm/tegra: Don't use vblank_disable_immediate on incapable driver.
  drm/radeon: stop trying to suspend UVD sessions
  drm/radeon: more strictly validate the UVD codec
  drm/radeon: make UVD handle checking more strict
  drm/radeon: make VCE handle check more strict
  drm/radeon: fix userptr lockup
  drm/radeon: fix userptr BO unpin bug v3
  drm/amdkfd: Initialize sdma vm when creating sdma queue
  drm/amdkfd: Don't report local memory size
  drm/amdkfd: allow unregister process with queues
  drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
  drm/i915: Sink rate read should be saved in deca-kHz
  drm/i915/dp: there is no audio on port A
  drm/i915: Add missing MacBook Pro models with dual channel LVDS
  drm/i915: Assume dual channel LVDS if pixel clock necessitates it
  drm/radeon: don't setup audio on asics that don't support it
  drm/radeon: disable semaphores for UVD V1 (v2)

misc i915 fixes.

* tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
  drm/i915: Sink rate read should be saved in deca-kHz
  drm/i915/dp: there is no audio on port A
  drm/i915: Add missing MacBook Pro models with dual channel LVDS
  drm/i915: Assume dual channel LVDS if pixel clock necessitates it

Since commit 844b03f2 we make
sure that after vblank irq off, we return the last valid
(vblank count, vblank timestamp) pair to clients, e.g., during
modesets, which is good.

An overlooked side effect of that commit for kms drivers without
support for precise vblank timestamping is that at vblank irq
enable, when we update the vblank counter from the hw counter, we
can't update the corresponding vblank timestamp, so now we have a
totally mismatched timestamp for the new count to confuse clients.

Restore old client visible behaviour from before Linux 3.17, but
zero out the timestamp at vblank counter update (instead of disable
as in original implementation) if we can't generate a meaningful
timestamp immediately for the new vblank counter. This will fix
this regression, so callers know they need to retry again later
if they need a valid timestamp, but at the same time preserves
the improvements made in the commit mentioned above.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> #v3.17+

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull ARM fixes from Russell King:
 "A set of ARM fixes:

   - fix an off-by-one error in the iommu DMA ops, which caused errors
     with a 4GiB size.

   - remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE
     macro.

   - remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where
     this symbol never appeared in any Kconfig.

   - fix Feroceon code to cope with a previous change correctly (it
     incorrectly left an additional word in an assembly structure
     definition)

   - avoid a misleading IRQ affinity warning in the ARM PMU code for
     IRQs which are already affine to their CPUs.

   - fix the node name printed in the IRQ affinity warning"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8352/1: perf: Fix the pmu node name in warning message
  ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs
  ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro
  ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block
  ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE
  ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops

Pull samsung fixes from Kukjin Kim:
 "Here is Samsung fixes for v4.1.  Since I've missed to send this via
  arm-soc tree before v4.1-rc3, so I'm sending this to you directly

   - fix commit ea08de16 ("ARM: dts: Add DISP1 power domain for
     exynos5420") which causes 'unhandled fault: imprecise external
     abort' error when PD turned off.  ("make DP a consumer of DISP1
     power domain")

   - fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add
     'rtc_src' clock to rtc node for source clock of rtc")

   - fix typo for 'cpu-crit-0' trip point on exynos5420/5440

   - fix S2R failure on exynos5250-snow due to card power of Marvell
     WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi
     SDIO node")"

* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
  ARM: dts: Fix typo in trip point temperature for exynos5420/5440
  ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
  ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420

Pull ARM SoC fixes from Arnd Bergmann:
 "A few patches have come up since the merge window.  The largest one is
  a rewrite of the PXA lubbock/mainstone IRQ handling.  This was already
  broken in 2011 by a change to the GPIO code and only noticed now.

  The other changes contained here are:

  MAINTAINERS file updates:

   - Ray Jui and Scott Branden are now co-maintainers for some of the
     mach-bcm chips, while Christian Daudt and Marc Carino have stepped
     down.

   - Andrew Victor is no longer maintaining at91.  Instead, Alexandre
     Belloni now becomes an official maintainer, after having done a
     bulk of the work for a while.

   - Baruch Siach, who added the mach-digicolor platform in 4.1 is now
     listed as maintainer

   - The git URL for mach-socfpga has changed

  Bug fixes:

   - Three bug fixes for new rockchip rk3288 code

   - A regression fix to make SD card support work on certain ux500
     boards

   - multiple smaller dts fixes for imx, omap, mvebu, and shmobile

   - a regression fiix for omap3 power consumption

   - a fix for regression in the ARM CCI bus driver

  Configuration changes:

   - more imx platforms are now enabled in multi_v7_defconfig"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  MAINTAINERS: add Conexant Digicolor machines entry
  MAINTAINERS: socfpga: update the git repo for SoCFPGA
  ARM: multi_v7_defconfig: Select more FSL SoCs
  MAINTAINERS: replace an AT91 maintainer
  drivers: CCI: fix used_mask init in validate_group()
  bus: omap_l3_noc: Fix master id address decoding for OMAP5
  bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
  ARM: dts: dra7: Fix efuse register size for ABB
  ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
  ARM: dts: am57xx-beagle-x15: Switch UART mux pins
  ARM: dts: am437x-sk: reduce col-scan-delay-us
  ARM: dts: am437x-sk: fix for new newhaven display module revision
  ARM: dts: am57xx-beagle-x15: Fix RTC aliases
  ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
  ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
  ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
  ARM: dts: OMAP3-N900: Add microphone bias voltages
  ARM: OMAP2+: Fix omap off idle power consumption creeping up
  MAINTAINERS: Update brcmstb entry
  MAINTAINERS: Remove Christian Daudt for mach-bcm
  ...

Pull user-namespace fix from Eric Biederman:
 "Eric Windish recently reported a really bug that allows mounting fresh
  copies of proc and sysfs when it really should not be allowed.  The
  code attempted to verify that proc and sysfs were fully visible but
  there is a test missing to ensure that the root of the filesystem is
  visible.  Doh!

  The following patch fixes that.

  This fixes a containment issue that the docker folks are seeing"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Fix fs_fully_visible to verify the root directory is visible

Pull irq updates from Thomas Gleixner:
 "Two patches from the irq departement:

   - a simple fix to make dummy_irq_chip usable for wakeup scenarios

   - removal of the gic arch_extn hackery.  Now that all users are
     converted we really want to get rid of the interface so people wont
     come up with new use cases"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: gic: Drop support for gic_arch_extn
  genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip

Pull timer fix from Thomas Gleixner:
 "A simple fix to actually shut down a detached device instead of
  keeping it active"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Shutdown detached clockevent device

We cast away the volatile, but really, why make it volatile at all?
We already do a mb() inside the cpumask_empty() loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a dumb bug in fs_fully_visible that allows proc or sys to
be mounted if there is a bind mount of part of /proc/ or /sys/ visible.

Cc: stable@vger.kernel.org
Reported-by: Eric Windisch <ewindisch@docker.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull vfs fixes from Al Viro:
 "A couple of fixes for bugs caught while digging in fs/namei.c.  The
  first one is this cycle regression, the second is 3.11 and later"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  path_openat(): fix double fput()
  namei: d_is_negative() should be checked before ->d_seq validation

path_openat() jumps to the wrong place after do_tmpfile() - it has
already done path_cleanup() (as part of path_lookupat() called by
do_tmpfile()), so doing that again can lead to double fput().

Cc: stable@vger.kernel.org	# v3.11+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fetching ->d_inode, verifying ->d_seq and finding d_is_negative() to
be true does *not* mean that inode we'd fetched had been NULL - that
holds only while ->d_seq is still unchanged.

Shift d_is_negative() checks into lookup_fast() prior to ->d_seq
verification.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull btrfs fix from Chris Mason:
 "When an arm user reported crashes near page_address(page) in my new
  code, it became clear that I can't be trusted with GFP masks.  Filipe
  beat me to the patch, and I'll just be in the corner with my dunce cap
  on"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix wrong mapping flags for free space inode

Pull device mapper fixes from Mike Snitzer:
 "Two additional fixes for changes introduced via DM during the 4.1
  merge window.

  The first reverts a dm-crypt change that wasn't correct.  The second
  fixes a device format regression that impacted userspace"

* tag 'dm-4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  init: fix regression by supporting devices with major:minor:offset format
  Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY"

Pull block fixes from Jens Axboe:
 "A collection of fixes since the merge window;

   - fix for a double elevator module release, from Chao Yu.  Ancient bug.

   - the splice() MORE flag fix from Christophe Leroy.

   - a fix for NVMe, fixing a patch that went in in the merge window.
     From Keith.

   - two fixes for blk-mq CPU hotplug handling, from Ming Lei.

   - bdi vs blockdev lifetime fix from Neil Brown, fixing and oops in md.

   - two blk-mq fixes from Shaohua, fixing a race on queue stop and a
     bad merge issue with FUA writes.

   - division-by-zero fix for writeback from Tejun.

   - a block bounce page accounting fix, making sure we inc/dec after
     bouncing so that pre/post IO pages match up.  From Wang YanQing"

* 'for-linus' of git://git.kernel.dk/linux-block:
  splice: sendfile() at once fails for big files
  blk-mq: don't lose requests if a stopped queue restarts
  blk-mq: fix FUA request hang
  block: destroy bdi before blockdev is unregistered.
  block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE
  elevator: fix double release of elevator module
  writeback: use |1 instead of +1 to protect against div by zero
  blk-mq: fix CPU hotplug handling
  blk-mq: fix race between timeout and CPU hotplug
  NVMe: Fix VPD B0 max sectors translation