1. 04 Dec, 2015 3 commits
  2. 02 Dec, 2015 2 commits
  3. 30 Nov, 2015 3 commits
  4. 27 Nov, 2015 1 commit
    • Dave Airlie's avatar
      Merge branch 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes · 8c14f72b
      Dave Airlie authored
      Ben Skeggs wrote:
      A couple of regression fixes, some more boards whitelisted for a hw bug
      workaround, gr/ucode fixes for hangs a user is seeing.
      
      The changes look larger than they actually are due to the ucode binaries
      (*.fucN.h) being regenerated.
      
      * 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
        drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set
        drm/nouveau/nvif: allow userspace access to its own client object
        drm/nouveau/gr/gf100-: fix oops when calling zbc methods
        drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero
        drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC
        drm/nouveau/gr/gf100-: split out per-gpc address calculation macro
        drm/nouveau/bios: return actual size of the buffer retrieved via _ROM
        drm/nouveau/instmem: protect instobj list with a spinlock
        drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop
        drm/nouveau/pci: enable c800 magic for Clevo P157SM
      8c14f72b
  5. 26 Nov, 2015 1 commit
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 2f137161
      Dave Airlie authored
      Radeon and amdgpu fixes for 4.4:
      - DPM fixes for r7xx devices
      - VCE fixes for Stoney
      - GPUVM fixes
      - Scheduler fixes
      
      * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
        drm/radeon: make some dpm errors debug only
        drm/radeon: make rv770_set_sw_state failures non-fatal
        drm/amdgpu: move dependency handling out of atomic section v2
        drm/amdgpu: optimize scheduler fence handling
        drm/amdgpu: remove vm->mutex
        drm/amdgpu: add mutex for ba_va->valids/invalids
        drm/amdgpu: adapt vce session create interface changes
        drm/amdgpu: vce use multiple cache surface starting from stoney
        drm/amdgpu: reset vce trap interrupt flag
      2f137161
  6. 25 Nov, 2015 16 commits
  7. 24 Nov, 2015 14 commits
    • Christoph Hellwig's avatar
      block: fix blk_abort_request for blk-mq drivers · 55ce0da1
      Christoph Hellwig authored
      We only added the request to the request list for the !blk-mq case,
      so we should only delete it in that case as well.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      55ce0da1
    • Christoph Hellwig's avatar
      nvme: add missing unmaps in nvme_queue_rq · bf508e91
      Christoph Hellwig authored
      When we fail various metadata related operations in nvme_queue_rq we
      need to unmap the data SGL.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      bf508e91
    • Nishanth Aravamudan's avatar
      NVMe: default to 4k device page size · c5c9f25b
      Nishanth Aravamudan authored
      We received a bug report recently when DDW (64-bit direct DMA on Power)
      is not enabled for NVMe devices. In that case, we fall back to 32-bit
      DMA via the IOMMU, which is always done via 4K TCEs (Translation Control
      Entries).
      
      The NVMe device driver, though, assumes that the DMA alignment for the
      PRP entries will match the device's page size, and that the DMA aligment
      matches the kernel's page aligment. On Power, the the IOMMU page size,
      as mentioned above, can be 4K, while the device can have a page size of
      8K, while the kernel has a page size of 64K. This eventually trips the
      BUG_ON in nvme_setup_prps(), as we have a 'dma_len' that is a multiple
      of 4K but not 8K (e.g., 0xF000).
      
      In this particular case of page sizes, we clearly want to use the
      IOMMU's page size in the driver. And generally, the NVMe driver in this
      function should be using the IOMMU's page size for the default device
      page size, rather than the kernel's page size. There is not currently an
      API to obtain the IOMMU's page size across all architectures and in the
      interest of a stop-gap fix to this functional issue, default the NVMe
      device page size to 4K, with the intent of adding such an API and
      implementation across all architectures in the next merge window.
      
      With the functionally equivalent v3 of this patch, our hardware test
      exerciser survives when using 32-bit DMA; without the patch, the kernel
      will BUG within a few minutes.
      
      Signed-off-by: Nishanth Aravamudan <nacc at linux.vnet.ibm.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      c5c9f25b
    • Linus Torvalds's avatar
      Merge tag 'dm-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm · 6ffeba96
      Linus Torvalds authored
      Pull device mapper fixes from Mike Snitzer:
       "Two fixes for 4.4-rc1's DM ioctl changes that introduced the potential
        for infinite recursion on ioctl (with DM multipath).
      
        And four stable fixes:
      
         - A DM thin-provisioning fix to restore 'error_if_no_space' setting
           when a thin-pool is made writable again (after having been out of
           space).
      
         - A DM thin-provisioning fix to properly advertise discard support
           for thin volumes that are stacked on a thin-pool whose underlying
           data device doesn't support discards.
      
         - A DM ioctl fix to allow ctrl-c to break out of an ioctl retry loop
           when DM multipath is configured to 'queue_if_no_path'.
      
         - A DM crypt fix for a possible hang on dm-crypt device removal"
      
      * tag 'dm-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm thin: fix regression in advertised discard limits
        dm crypt: fix a possible hang due to race condition on exit
        dm mpath: fix infinite recursion in ioctl when no paths and !queue_if_no_path
        dm: do not reuse dm_blk_ioctl block_device input as local variable
        dm: fix ioctl retry termination with signal
        dm thin: restore requested 'error_if_no_space' setting on OODS to WRITE transition
      6ffeba96
    • Eric Dumazet's avatar
      pidns: fix NULL dereference in __task_pid_nr_ns() · 81b1a832
      Eric Dumazet authored
      I got a crash during a "perf top" session that was caused by a race in
      __task_pid_nr_ns() :
      
      pid_nr_ns() was inlined, but apparently compiler chose to read
      task->pids[type].pid twice, and the pid->level dereference crashed
      because we got a NULL pointer at the second read :
      
          if (pid && ns->level <= pid->level) { // CRASH
      
      Just use RCU API properly to solve this race, and not worry about "perf
      top" crashing hosts :(
      
      get_task_pid() can benefit from same fix.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      81b1a832
    • Paolo Bonzini's avatar
      Merge tag 'kvm-arm-for-v4.4-rc3' of... · 8bd142c0
      Paolo Bonzini authored
      Merge tag 'kvm-arm-for-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
      
      KVM/ARM Fixes for v4.4-rc3.
      
      Includes some timer fixes, properly unmapping PTEs, an errata fix, and two
      tweaks to the EL2 panic code.
      8bd142c0
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 4ce01c51
      Linus Torvalds authored
      Pull block layer fixes from Jens Axboe:
       "A round of fixes/updates for the current series.
      
        This looks a little bigger than it is, but that's mainly because we
        pushed the lightnvm enabled null_blk change out of the merge window so
        it could be updated a bit.  The rest of the volume is also mostly
        lightnvm.  In particular:
      
         - Lightnvm.  Various fixes, additions, updates from Matias and
           Javier, as well as from Wenwei Tao.
      
         - NVMe:
              - Fix for potential arithmetic overflow from Keith.
              - Also from Keith, ensure that we reap pending completions from
                a completion queue before deleting it.  Fixes kernel crashes
                when resetting a device with IO pending.
              - Various little lightnvm related tweaks from Matias.
      
         - Fixup flushes to go through the IO scheduler, for the cases where a
           flush is not required.  Fixes a case in CFQ where we would be
           idling and not see this request, hence not break the idling.  From
           Jan Kara.
      
         - Use list_{first,prev,next} in elevator.c for cleaner code.  From
           Gelian Tang.
      
         - Fix for a warning trigger on btrfs and raid on single queue blk-mq
           devices, where we would flush plug callbacks with preemption
           disabled.  From me.
      
         - A mac partition validation fix from Kees Cook.
      
         - Two merge fixes from Ming, marked stable.  A third part is adding a
           new warning so we'll notice this quicker in the future, if we screw
           up the accounting.
      
         - Cleanup of thread name/creation in mtip32xx from Rasmus Villemoes"
      
      * 'for-linus' of git://git.kernel.dk/linux-block: (32 commits)
        blk-merge: warn if figured out segment number is bigger than nr_phys_segments
        blk-merge: fix blk_bio_segment_split
        block: fix segment split
        blk-mq: fix calling unplug callbacks with preempt disabled
        mac: validate mac_partition is within sector
        mtip32xx: use formatting capability of kthread_create_on_node
        NVMe: reap completion entries when deleting queue
        lightnvm: add free and bad lun info to show luns
        lightnvm: keep track of block counts
        nvme: lightnvm: use admin queues for admin cmds
        lightnvm: missing free on init error
        lightnvm: wrong return value and redundant free
        null_blk: do not del gendisk with lightnvm
        null_blk: use device addressing mode
        null_blk: use ppa_cache pool
        NVMe: Fix possible arithmetic overflow for max segments
        blk-flush: Queue through IO scheduler when flush not required
        null_blk: register as a LightNVM device
        elevator: use list_{first,prev,next}_entry
        lightnvm: cleanup queue before target removal
        ...
      4ce01c51
    • Alex Deucher's avatar
      drm/radeon: make rv770_set_sw_state failures non-fatal · 4e7697ed
      Alex Deucher authored
      On some cards it takes a relatively long time for the change
      to take place.  Make a timeout non-fatal.
      
      bug:
      https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Cc: stable@vger.kernel.org
      4e7697ed
    • Mark Rutland's avatar
      arm64: kvm: report original PAR_EL1 upon panic · fbb4574c
      Mark Rutland authored
      If we call __kvm_hyp_panic while a guest context is active, we call
      __restore_sysregs before acquiring the system register values for the
      panic, in the process throwing away the PAR_EL1 value at the point of
      the panic.
      
      This patch modifies __kvm_hyp_panic to stash the PAR_EL1 value prior to
      restoring host register values, enabling us to report the original
      values at the point of the panic.
      Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      fbb4574c
    • Mark Rutland's avatar
      arm64: kvm: avoid %p in __kvm_hyp_panic · 1d7a4e31
      Mark Rutland authored
      Currently __kvm_hyp_panic uses %p for values which are not pointers,
      such as the ESR value. This can confusingly lead to "(null)" being
      printed for the value.
      
      Use %x instead, and only use %p for host pointers.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Cc: Christoffer Dall <christoffer.dall@linaro.org>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      1d7a4e31
    • Christoffer Dall's avatar
      KVM: arm/arm64: vgic: Trust the LR state for HW IRQs · 9f958c11
      Christoffer Dall authored
      We were probing the physial distributor state for the active state of a
      HW virtual IRQ, because we had seen evidence that the LR state was not
      cleared when the guest deactivated a virtual interrupted.
      
      However, this issue turned out to be a software bug in the GIC, which
      was solved by: 84aab5e68c2a5e1e18d81ae8308c3ce25d501b29
      (KVM: arm/arm64: arch_timer: Preserve physical dist. active
      state on LR.active, 2015-11-24)
      
      Therefore, get rid of the complexities and just look at the LR.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      9f958c11
    • Christoffer Dall's avatar
      KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active · 0e3dfda9
      Christoffer Dall authored
      We were incorrectly removing the active state from the physical
      distributor on the timer interrupt when the timer output level was
      deasserted.  We shouldn't be doing this without considering the virtual
      interrupt's active state, because the architecture requires that when an
      LR has the HW bit set and the pending or active bits set, then the
      physical interrupt must also have the corresponding bits set.
      
      This addresses an issue where we have been observing an inconsistency
      between the LR state and the physical distributor state where the LR
      state was active and the physical distributor was not active, which
      shouldn't happen.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      0e3dfda9
    • Christoffer Dall's avatar
      KVM: arm/arm64: Fix preemptible timer active state crazyness · 7e16aa81
      Christoffer Dall authored
      We were setting the physical active state on the GIC distributor in a
      preemptible section, which could cause us to set the active state on
      different physical CPU from the one we were actually going to run on,
      hacoc ensues.
      
      Since we are no longer descheduling/scheduling soft timers in the
      flush/sync timer functions, simply moving the timer flush into a
      non-preemptible section.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      7e16aa81
    • Marc Zyngier's avatar
      arm64: KVM: Add workaround for Cortex-A57 erratum 834220 · 498cd5c3
      Marc Zyngier authored
      Cortex-A57 parts up to r1p2 can misreport Stage 2 translation faults
      when a Stage 1 permission fault or device alignment fault should
      have been reported.
      
      This patch implements the workaround (which is to validate that the
      Stage-1 translation actually succeeds) by using code patching.
      
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      498cd5c3