The video processor supports a tiled version of the NV12 format,
known as NV12MT in V4L2 terms. The support was removed in commit
083500ba due to not being a real
pixel format, but rather NV12 with a special memory layout.

With the introduction of FB modifiers, we can now properly support
this format again.

Tested with a hacked up modetest from libdrm's test suite on
an ODROID-X2 (Exynos4412).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The current comment sounds like the division op is done to
compensate for some hardware erratum. But the chroma plane
having half the height of the luma plane is just the way
NV12/NV21 is defined, so clarify this behaviour.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Since panel's mode of work is propagated properly from panel to DECON,
there is no need to use redundant private device tree property.
The only issue with such approach is that check for required interrupts
should be postponed until panel communicate its requirements, ie to
mode validation phase - mode_valid callback.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

crtc::mode_valid callback is required to implement proper pipeline
validation for command/video modes. Since Exynos uses private
framework such callback should be added to it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

To allow runtime validation of mode of work irq request
code should be split into two separate phases:
- irq reqesting,
- irq checking.
Following patches will move 2nd phase to mode validation phase.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

MIC driver should use info from CRTC to check mode of work instead of
illegally peeking into nodes of other devices.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

mipi_dsi framework provides information about panel's mode of work.
This info should be propagated upstream to configure all elements of
the pipeline. As CRTC is the common denominator of the pipeline we can
put such info into its structures.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Description of drm_helper_hpd_irq_event clearly states that drivers
supporting hotplug events per connector should use different helper -
drm_kms_helper_hotplug_event. To achieve it following changes have
been performed:
- moved down all DSI ops - they require exynos_dsi_disable function
to be defined earlier,
- simplified exynos_dsi_detect - there is no real detection, it just
returns if panel is attached,
- DSI attach/detach callbacks attaches/detaches DRM panel and sets
connector status and other context fields accordingly, all this is
performed under mutex, as these callbacks are asynchronous.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

All encoders share the same code to set encoders possible_crtcs field.
The patch creates helper to abstract out this code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Linux core provide helpers for polling with timeout, lets use them.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Not a lot that's ready to be included this round for Nouveau.  GP108
modesetting support, and misc other fixes.

* 'linux-4.14' of git://github.com/skeggsb/linux:
  drm/nouveau/kms/nv50: perform null check on msto[i] rathern than msto
  drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
  drm/nouveau: silence suspend/resume debugging messages
  drm/nouveau/kms/nv04-nv4x: fix exposed format list
  drm/nouveau/kms/nv10-nv40: add NV21 support to overlay
  drm/nouveau/kms/nv04-nv40: improve overlay error detection, fix pitch setting
  drm/nouveau/kms/nv04-nv40: prevent undisplayable framebuffers from creation
  drm/nouveau/mpeg: print more debug info when rejecting dma objects
  drm/nouveau/fb/gf100-: zero mmu debug buffers
  drm/nouveau/bar/gf100: add config option to limit BAR2 to 16MiB
  initial support (display-only) for GP108
  drm/nouveau/falcon: use a more reasonable msgqueue timeout value
  drm/nouveau/disp: Silence DCB warnings.
  drm/nouveau/bios: Demote missing fp table message to NV_DEBUG.
  drm/nouveau/pmu/gt215-: abstract detection of whether reset is needed
  drm/nouveau/pmu/gt215: fix reset
  drm/nouveau/mc/gf100: add pmu to reset mask
  drm/nouveau/disp/gf119-: avoid creating non-existent heads
  drm/nouveau/therm/gm200: Added
  drm/nouveau/therm: fix spelling mistake on array thresolds

The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.

Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.

Detected by CoverityScan, CID#1375915 ("Array compared against 0")

Fixes: f479c0ba ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.

Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These are particularly annoying on Optimus systems where these paths can
be called regularly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.

The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.

While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These are used for accesses to sparse mappings, and we want reads of
such mappings to return 0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.

(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
       so not able to 100% confirm that no other changes from GP107
       are needed.  Quick testing shows it seems to work well enough
       for display.  Due to NVIDIA dragging their heels on getting
       signed firmware to us, this is the best we can do for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.

Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.

Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.

Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GT215, GF100-GP100, and GP10x are all different.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This allows temperature readouts on maxwell2 GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

imx-drm: lock scanout transfers for consecutive bursts

- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
  to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
  variable in ipu_plane_atomic_update

* tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: lock scanout transfers for consecutive bursts
  drm/imx: ipuv3-plane: use fb local variable instead of state->fb

Final pile of features for 4.14

- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
  modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
  wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
  lookups (Chris)

gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)

Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.

Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!

* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
  drm/i915: Update DRIVER_DATE to 20170818
  drm/i915/bxt: use NULL for GPIO connection ID
  drm/i915: Mark the GT as busy before idling the previous request
  drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
  drm/i915: Replace execbuf vma ht with an idr
  drm/i915: Simplify eb_lookup_vmas()
  drm/i915: Convert execbuf to use struct-of-array packing for critical fields
  drm/i915: Check context status before looking up our obj/vma
  drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
  drm/i915: Stop touching forcewake following a gen6+ engine reset
  MAINTAINERS: drm/i915 has a new maintainer team
  drm/i915: Split pin mapping into per platform functions
  drm/i915/opregion: let user specify override VBT via firmware load
  drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
  drm/i915/gen10: implement gen 10 watermarks calculations
  drm/i915/cnl: Fix LSPCON support.
  drm/i915/vbt: ignore extraneous child devices for a port
  drm/i915/cnl: Setup PAT Index.
  drm/i915/edp: Allow alternate fixed mode for eDP if available.
  drm/i915: Add support for drm syncobjs
  ...

drm/tegra: Changes for v4.14-rc1

This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.

The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.

There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.

* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
  drm/tegra: Prevent BOs from being freed during job submission
  drm/tegra: gem: Implement mmap() for PRIME buffers
  drm/tegra: Support render node
  drm/tegra: sor: Trace register accesses
  drm/tegra: dpaux: Trace register accesses
  drm/tegra: dsi: Trace register accesses
  drm/tegra: hdmi: Trace register accesses
  drm/tegra: dc: Trace register accesses
  drm/tegra: sor: Use unsigned int for register offsets
  drm/tegra: hdmi: Use unsigned int for register offsets
  drm/tegra: dsi: Use unsigned int for register offsets
  drm/tegra: dpaux: Use unsigned int for register offsets
  drm/tegra: dc: Use unsigned int for register offsets
  drm/tegra: Fix NULL deref in debugfs/iova
  drm/tegra: switch to drm_*_get(), drm_*_put() helpers
  drm/tegra: Set MODULE_FIRMWARE for the VIC
  drm/tegra: Add CONFIG_OF dependency
  gpu: host1x: Support sub-devices recursively
  gpu: host1x: fix error return code in host1x_probe()
  gpu: host1x: Fix bitshift/mask multipliers
  ...

this cycle has been fairly calm in etnaviv land with most of the action
happening on the userspace side.

Notable changes:
- Improvements to CONFIG option handling to make it harder for users to
shoot themselves in the foot due to kernel misconfiguration.
- Tweaked GEM object population, so that userspace can take considerate
action when memory allocation fails, rather than waking the raging OOM
killer beast.

* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAIL
  drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabled
  drm/etnaviv: switch to drm_*{get,put} helpers
  drm/etnaviv: select CMA and DMA_CMA if available
  drm/etnaviv: populate GEM objects on cpu_prep
  drm/etnaviv: reduce allocation failure message severity
  drm/etnaviv: don't trigger OOM killer when page allocation fails

This is the amdkfd pull request for 4.14 merge window.
AMD has started cleaning the pipe and sending patches from their internal
development to the upstream community.

The plan as I understand it is to first get all the non-dGPU patches to
upstream and then move to upstream dGPU support.

The patches here are relevant only for Kaveri and Carrizo.

The following is a summary of the changes:
- Add new IOCTL to set a Scratch memory VA
- Update PM4 headers for new firmware that support scratch memory
- Support image tiling mode
- Remove all uses of BUG_ON
- Various Bug fixes and coding style fixes

* tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux: (24 commits)
  drm/amdkfd: Implement image tiling mode support v2
  drm/amdgpu: Add kgd kfd interface get_tile_config() v2
  drm/amdkfd: Adding new IOCTL for scratch memory v2
  drm/amdgpu: Add kgd/kfd interface to support scratch memory v2
  drm/amdgpu: Program SH_STATIC_MEM_CONFIG globally, not per-VMID
  drm/amd: Update MEC HQD loading code for KFD
  drm/amdgpu: Disable GFX PG on CZ
  drm/amdkfd: Update PM4 packet headers
  drm/amdkfd: Clamp EOP queue size correctly on Gfx8
  drm/amdkfd: Add more error printing to help bringup v2
  drm/amdkfd: Handle remaining BUG_ONs more gracefully v2
  drm/amdkfd: Allocate gtt_sa_bitmap in long units
  drm/amdkfd: Fix doorbell initialization and finalization
  drm/amdkfd: Remove BUG_ONs for NULL pointer arguments
  drm/amdkfd: Remove usage of alloc(sizeof(struct...
  drm/amdkfd: Fix goto usage v2
  drm/amdkfd: Change x==NULL/false references to !x
  drm/amdkfd: Consolidate and clean up log commands
  drm/amdkfd: Clean up KFD style errors and warnings v2
  drm/amdgpu: Remove hard-coded assumptions about compute pipes
  ...

Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.14

A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.

* tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  sun4i_hdmi: add CEC support
  dt-bindings: display: sunxi: Improve endpoint ID scheme readability
  drm/sun4i: tcon: remove unused function
  drm/sun4i: Remove useless atomic_check
  drm/sun4i: Add if statement instead of depends on
  drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
  drm/sun4i: constify drm_plane_helper_funcs

More changes for 4.14.  Highlights:
- command submission overhead improvements
- Huge page support for vega10
- physical mode support for mjpeg for asics that don't support UVD vm
- improve ttm_mem_type_manager_func debug
- misc ttm fixes, cleanups
- misc gpuvm cleanups

* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
  drm/ttm: use reservation_object_trylock in ttm_bo_individualize_resv v2
  drm/amdgpu: fix vega10 graphic hang issue in S3 test
  drm/amdgpu: bump version for support of UVD MJPEG decode
  drm/amdgpu: add MJPEG check for UVD physical mode msg buffer
  drm/ttm: Fix accounting error when fail to get pages for pool
  drm/amd/amdgpu: expose fragment size as module parameter (v2)
  drm/amd/amdgpu: store fragment_size in vm_manager
  drm/amdgpu: rename VM invalidated to moved
  drm/amdgpu: separate bo_va structure
  drm/amdgpu: drop the extra VM huge page flag v2
  drm/amdgpu: remove superflous amdgpu_bo_kmap in the VM
  drm/amdgpu: cleanup static CSA handling
  drm/amdgpu: SHADOW and VRAM_CONTIGUOUS flags shouldn't be used by userspace
  drm/amdgpu: save list length when fence is signaled
  drm/amdgpu: move vram usage tracking into the vram manager v2
  drm/amdgpu: move gtt usage tracking into the gtt manager v2
  drm/amdgpu: move debug print into the MM managers
  drm/amdgpu: fix incorrect use of the lru_lock
  drm/radeon: fix incorrect use of the lru_lock
  drm/ttm: make ttm_mem_type_manager_func debug more useful
  ...