The inline function is no longer used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will determining the number of bytes to add based on the
bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the sample to the async buffer.
That function will determining the number of bytes to add based on the
bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will handle the '* sizeof(foo)' calculation to determine
the number of bytes to add.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will determining the number of bytes to add based on the
bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will determining the number of bytes to add based on the
bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
The number of bytes to add is determined automatically based on the
number of samples and the bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will handle the '* sizeof(foo)' calculation to determine
the number of bytes to add.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
The number of bytes to add is determined automatically based on the
number of samples and the bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The inline function is no longer used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will handle single and multi sample writes by determining
the number of bytes to add based on the bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will handle single and multi samples writes by determining
the number of bytes to add based on the bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
The number of bytes to add is determined automatically based on the
number of samples and the bytes_per_sample().

Change the return type of move_block_from_dma() to void and remove the
unnecessary check of the return value of comedi_buf_write_samples().
The callers don't check the return and it's really not necessary. If
comedi_buf_write_samples() fails to allocate enough space in the async
buffer to add all the samples it sets the COMEDI_CB_OVERFLOW event.
This will cause the async command to (*cancel) when the events are
handled.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer.
That function will handle single and multi samples writes by determining
the number of bytes to add based on the number of samples and the
bytes_per_sample().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() to add the samples to the async buffer. That
function will handle single and multi samples writes by determining the number
of bytes to add based on the number of samples and the bytes_per_sample().

Also, remove the unnecessary COMEDI_CB_BLOCK event. comedi_buf_write_samples()
will automatically add that event after adding the samples to the async
buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add all
the samples to the async buffer in one operation.

The core will add the COMEDI_CB_BLOCK event when data is written to the
async buffer. Remove the unnecessary event in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the
single sample to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the
single sample to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the
single sample to the async buffer.

The core will add the COMEDI_CB_BLOCK event when data is written to the
async buffer. Remove the unnecessary event in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the
single sample to the async buffer.

The core will add the COMEDI_CB_BLOCK event when data is written to the
async buffer. Remove the unnecessary event from the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the
single sample to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The inline function is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a generic method to write samples to the async buffer.

The number of samples is first checked against the number of samples that
would fill the async buffer. The size of each sample is determined using
the bytes_per_sample() helper. If all the samples will fit in the async
buffer they are written to the buffer using comedi_write_array_to_buffer().

This will allow converting all the comedi drivers to use a common method to
write data to the async buffer.

Since comedi_write_array_to_buffer() sets the COMEDI_CB_BLOCK event after
writing the data, those events can be removed from the drivers.

In addition, comedi_inc_scan_progress() will automatically detect the end of
scan and set the COMEDI_CB_EOS event. Those events can also be removed from
the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This parameter is always passed as '0'. Remove the unnecessary parameter.

This allows removing the unnecessary check of the read_ptr overflow.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This parameter is always passed as '0'. Remove the unnecessary parameter.

This allows removing the unnecessary check of the write_ptr overflow.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only used internally. Remove the export.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only used internally. Remove the export.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is no longer used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_read_samples() to read the analog output samples from
the async buffer. That function will set the COMEDI_CB_BLOCK event
when samples are read from the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_read_samples() to read the analog output samples from
the async buffer. That function will set the COMEDI_CB_BLOCK event
when samples are read from the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_read_samples() to read the analog output samples from
the async buffer. That function will set the COMEDI_CB_BLOCK event
when samples are read from the async buffer. In addition, the core
will also handle the end-of-scan detection and set the COMEDI_CB_EOS
event.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_buf_read_samples() to get the single samples from the async
buffer. The number of samples in the buffer was validated by the callers
so the error checking can be removed. In addition, the core will set the
COMEDI_CB_BLOCK event so it can also be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A number of drivers currently use comedi_buf_get() to read single samples
from the the async buffer. This works but the drivers have to handle the
COMEDI_CB_BLOCK and COMEDI_CB_EOS events. Converting those drivers to use
comedi_buf_read_samples() moves the handling of those events into the core.

Modify comedi_buf_read_samples() so that the async buffer is checked for
the number of full samples available. Use that to clamp the number of
samples that will be read. This makes sure that only full samples are
read from the async buffer making comedi_buf_read_samples() mimic the
action of comedi_buf_get() with the added benifit of handling the events.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by comedi_buf_read_samples(). Absorb it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only used internally. Remove the export.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function is no longer used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to read the analog output samples from the
async buffer and prep the DMA.

Use comedi_buf_read_samples() to read the analog output samples from
the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to read the analog output samples from the
async buffer.

This fixes a bug in load_ao_dma_buffer(). That function was decrementing
the 'ao_count' by the number of bytes, not the number of samples, that
were read from the async buffer.

Use comedi_buf_read_samples() to read the analog output samples from
the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to load the analog output FIFO.

This fixes a bug in cb_pcidas_ao_inttrig(). That function was writing
'num_bytes' data values to the FIFO instead of 'num_points'. This results
in twice the number of data values getting written to the FIFO.

Use comedi_buf_read_samples() read the analog output samples from the async
buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new generic method to read the analog output samples from the async
buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>