- 03 Mar, 2016 16 commits
-
-
Peter Zijlstra authored
commit 4c9a4bc8 upstream. In order to remove dropping rq->lock from the switched_{to,from}()/prio_changed() sched_class methods, run the balance callbacks after it. We need to remove dropping rq->lock because its buggy, suppose using sched_setattr()/sched_setscheduler() to change a running task from FIFO to OTHER. By the time we get to switched_from_rt() the task is already enqueued on the cfs runqueues. If switched_from_rt() does pull_rt_task() and drops rq->lock, load-balancing can come in and move our task @p to another rq. The subsequent switched_to_fair() still assumes @p is on @rq and bad things will happen. By using balance callbacks we delay the load-balancing operations {rt,dl}x{push,pull} until we've done all the important work and the task is fully set up. Furthermore, the balance callbacks do not know about @p, therefore they cannot get confused like this. Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: oleg@redhat.com Cc: wanpeng.li@linux.intel.com Link: http://lkml.kernel.org/r/20150611124742.615343911@infradead.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Peter Zijlstra authored
commit e3fca9e7 upstream. Generalize the post_schedule() stuff into a balance callback list. This allows us to more easily use it outside of schedule() and cross sched_class. Signed-off-by:
-
Peter Zijlstra authored
commit 6c3b4d44 upstream. The idle post_schedule flag is just a vile waste of time, furthermore it appears unneeded, move the idle_enter_fair() call into pick_next_task_idle(). Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Manish Chopra authored
commit ad6afbe9 upstream. The scratchpad is a shared block between all functions of a given device. Due to HW limitations, we can't properly close its parity notifications to all functions on legal flows. E.g., it's possible that while taking a register dump from one function a parity error would be triggered on other functions. Today driver doesn't consider this parity as a 'real' parity unless its being accompanied by additional indications [which would happen in a real parity scenario]; But it does print notifications for such events in the system logs. This eliminates such prints - in case of real parities driver would have additional indications; But if this is the only signal user will not even see a parity being logged in the system. Signed-off-by:
Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Patrick Schaaf <netdev@bof.de> Tested-by:
-
Olga Kornievskaia authored
commit a41cbe86 upstream. A test case is as the description says: open(foobar, O_WRONLY); sleep() --> reboot the server close(foobar) The bug is because in nfs4state.c in nfs4_reclaim_open_state() a few line before going to restart, there is clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &state->flags). NFS4CLNT_RECLAIM_NOGRACE is a flag for the client states not open owner states. Value of NFS4CLNT_RECLAIM_NOGRACE is 4 which is the value of NFS_O_WRONLY_STATE in nfs4_state->flags. So clearing it wipes out state and when we go to close it, “call_close” doesn’t get set as state flag is not set and CLOSE doesn’t go on the wire. Signed-off-by:
Olga Kornievskaia <aglo@umich.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Christophe Leroy authored
commit 0ff28d9f upstream. Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <sys/socket.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/if_alg.h> int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Hariprasad S authored
commit 67f1aee6 upstream. The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [a pox on developers and maintainers who do not cc: stable for bug fixes like this - gregkh] Signed-off-by:
-
Bjørn Mork authored
commit d061c1ca upstream. Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andrey Skvortsov authored
commit 3158a8d4 upstream. $ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by:
Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by:
-
Ken Lin authored
commit 6627ae19 upstream. Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by:
Ken Lin <ken.lin@advantech.com.tw> Signed-off-by:
Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by:
-
Gerhard Uttenthaler authored
commit 90cfde46 upstream. This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by:
Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Joe Thornber authored
commit 49e99fc7 upstream. When you take a metadata snapshot the btree roots for the mapping and details tree need to have their reference counts incremented so they persist for the lifetime of the metadata snap. The roots being incremented were those currently written in the superblock, which could possibly be out of date if concurrent IO is triggering new mappings, breaking of sharing, etc. Fix this by performing a commit with the metadata lock held while taking a metadata snapshot. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Zheng Liu authored
commit 2ecf0cdb upstream. In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Tested-by:
Joshua Schmid <jschmid@suse.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by:
-
Al Viro authored
commit 4d4d8573 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Tested-by:
-
Egbert Eich authored
commit 28fb4cb7 upstream. Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Egbert Eich <eich@suse.de> [pulled from SuSE tree by me - airlied] Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit f3775549 upstream. The tracepoint infrastructure uses RCU sched protection to enable and disable tracepoints safely. There are some instances where tracepoints are used in infrastructure code (like kfree()) that get called after a CPU is going offline, and perhaps when it is coming back online but hasn't been registered yet. This can probuce the following warning: [ INFO: suspicious RCU usage. ] 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S ------------------------------- include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S 4.4.0-00006-g0fe53e8-dirty #34 Call Trace: [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable) [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170 [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440 [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100 [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150 [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140 [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310 [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60 [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40 [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560 [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360 [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14 This warning is not a false positive either. RCU is not protecting code that is being executed while the CPU is offline. Instead of playing "whack-a-mole(TM)" and adding conditional statements to the tracepoints we find that are used in this instance, simply add a cpu_online() test to the tracepoint code where the tracepoint will be ignored if the CPU is offline. Use of raw_smp_processor_id() is fine, as there should never be a case where the tracepoint code goes from running on a CPU that is online and suddenly gets migrated to a CPU that is offline. Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.orgReported-by:
Denis Kirjanov <kda@linux-powerpc.org> Fixes: 97e1c18e ("tracing: Kernel Tracepoints") Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 02 Mar, 2016 24 commits
-
-
Neil Horman authored
[ Upstream commit d9749fb5 ] Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not). To fix this, we change the logic slightly. We start by computing a goal allocation order (which is limited by the maximum size hash table we want to support. Then we attempt to allocate that size table, decreasing the order until a successful allocation is made. Then, with the resultant successful order we compute the number of buckets that hash table supports, which we then round down to the nearest power of two, giving us the number of entries the table actually supports. I've tested this locally here, using non-debug and spinlock-debug kernels, and the number of entries in the hashtable consistently work out to be powers of two in all cases. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit b5f05492 ] The value passed by unix_diag_get_exact to unix_lookup_by_ino has type __u32, but unix_lookup_by_ino's argument ino has type int, which is not a problem yet. However, when ino is compared with sock_i_ino return value of type unsigned long, ino is sign extended to signed long, and this results to incorrect comparison on 64-bit architectures for inode numbers greater than INT_MAX. This bug was found by strace test suite. Fixes: 5d3cae8b ("unix_diag: Dumping exact socket core") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Anton Protopopov authored
[ Upstream commit a97eb33f ] An error response from a RTM_GETNETCONF request can return the positive error value EINVAL in the struct nlmsgerr that can mislead userspace. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Acked-by:
-
Xin Long authored
[ Upstream commit deed49df ] Since the gc of ipv4 route was removed, the route cached would has no chance to be removed, and even it has been timeout, it still could be used, cause no code to check it's expires. Fix this issue by checking and removing route cache when we get route. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 29e73269 ] Drop reference on the relay_po socket when __pppoe_xmit() succeeds. This is already handled correctly in the error path. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 31c128b6 ] Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value Fixes: ec693d47 ('net/mlx4_en: Add HW timestamping (TS) support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Amir Vadai authored
[ Upstream commit 281e8b2f ] RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit aac8d3c2 ] Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by:
-
Rainer Weikusat authored
[ Upstream commit a5527dda ] The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By:
Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Tested-by:
-
Eric Dumazet authored
[ Upstream commit 91948309 ] Dmitry reported memory leaks of IP options allocated in ip_cmsg_send() when/if this function returns an error. Callers are responsible for the freeing. Many thanks to Dmitry for the report and diagnostic. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jay Vosburgh authored
[ Upstream commit 21a75f09 ] The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Veaceslav Falico authored
commit 010d3c39 upstream. bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by:
Ding Tianhong <dingtianhong@huawei.com> Fixes: aeea64ac ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
-
Xin Long authored
[ Upstream commit 7a84bd46 ] Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Siva Reddy Kallam authored
[ Upstream commit b7d98729 ] tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Hans Westgaard Ry authored
[ Upstream commit 5f74f82e ] Devices may have limits on the number of fragments in an skb they support. Current codebase uses a constant as maximum for number of fragments one skb can hold and use. When enabling scatter/gather and running traffic with many small messages the codebase uses the maximum number of fragments and may thereby violate the max for certain devices. The patch introduces a global variable as max number of fragments. Signed-off-by:
Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 44c3d0c1 ] Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 8013d1d7 ] Commit 6fd99094 ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 1cdda918 ] Currently, the egress interface index specified via IPV6_PKTINFO is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7 can be subverted when the user space application calls connect() before sendmsg(). Fix it by initializing properly flowi6_oif in connect() before performing the route lookup. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 27f7ed2b ] This patch extends commit b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 9a368aff ] Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by:
-
Eric Dumazet authored
[ Upstream commit fa0dc04d ] Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Reported-by:
-
Eric Dumazet authored
[ Upstream commit e62a123b ] Neal reported crashes with this stack trace : RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f ... CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0 ... [<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4 [<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0 [<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500 [<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330 [<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30 [<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90 [<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0 [<ffffffff8c17623e>] sock_aio_read+0xee/0x110 [<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0 [<ffffffff8c0673a1>] SyS_read+0x1e1/0x290 [<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b The problem here is the skb we provide to tcp_v4_send_ack() had to be parked in the backlog of a new TCP fastopen child because this child was owned by the user at the time an out of window packet arrived. Before queuing a packet, TCP has to set skb->dev to NULL as the device could disappear before packet is removed from the queue. Fix this issue by using the net pointer provided by the socket (being a timewait or a request socket). IPv6 is immune to the bug : tcp_v6_send_response() already gets the net pointer from the socket if provided. Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Manfred Rudigier authored
[ Upstream commit 81e8f2e9 ] PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicron.at> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Ursula Braun authored
[ Upstream commit 52a82e23 ] Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Reported-by:
Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com> Signed-off-by:
-
