- 16 Nov, 2007 40 commits
-
-
Bill Moss authored
patch 107acb23 in mainline. This patch fixes the problem of associating with wpa_secured hidden AP. Please try out. The original author of this patch is Bill Moss <bmoss@clemson.edu> Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
John W. Linville authored
patch cffdd30d in mainline. Some AP equipment "in the wild" services multiple SSIDs using the same BSSID. This patch changes the key of sta_bss_list to include the SSID as well as the BSSID and the channel so as to prevent one SSID from eclipsing another SSID with the same BSSID. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
John W. Linville authored
patch 65c107ab in mainline. Some AP equipment "in the wild" uses the same BSSID on multiple channels (particularly "a" vs. "b/g"). This patch changes the key of sta_bss_list to include both the BSSID and the channel so as to prevent a BSSID on one channel from eclipsing the same BSSID on another channel. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Johannes Berg authored
patch 1dd84aa2 in mainline. There's no reason to warn about an invalid AID field when the association was denied. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Johannes Berg authored
patch e797aa1b in mainline. The commit 65b6a277 titled "ieee80211: Fix header->qos_ctl endian issue" *introduced* an endianness bug. Partially revert it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jozsef Kadlecsik authored
Upstream commits: 17311393 + bc34b841 merged together. Merge done by Patrick McHardy <kaber@trash.net> [NETFILTER]: nf_conntrack_tcp: fix connection reopening With your description I could reproduce the bug and actually you were completely right: the code above is incorrect. Somehow I was able to misread RFC1122 and mixed the roles :-(: When a connection is >>closed actively<<, it MUST linger in TIME-WAIT state for a time 2xMSL (Maximum Segment Lifetime). However, it MAY >>accept<< a new SYN from the remote TCP to reopen the connection directly from TIME-WAIT state, if it: [...] The fix is as follows: if the receiver initiated an active close, then the sender may reopen the connection - otherwise try to figure out if we hold a dead connection. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Patrick McHardy authored
[NETLINK]: Fix unicast timeouts [ Upstream commit: c3d8d1e3 ] Commit ed6dcf4a in the history.git tree broke netlink_unicast timeouts by moving the schedule_timeout() call to a new function that doesn't propagate the remaining timeout back to the caller. This means on each retry we start with the full timeout again. ipc/mqueue.c seems to actually want to wait indefinitely so this behaviour is retained. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Herbert Xu authored
[IPSEC]: Fix crypto_alloc_comp error checking [ Upstream commit: 4999f362 ] The function crypto_alloc_comp returns an errno instead of NULL to indicate error. So it needs to be tested with IS_ERR. This is based on a patch by Vicenç Beltran Querol. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Patrick McHardy authored
patch fffe470a in mainline. [VLAN]: Fix SET_VLAN_INGRESS_PRIORITY_CMD ioctl Based on report and patch by Doug Kehn <rdkehn@yahoo.com>: vconfig returns the following error when attempting to execute the set_ingress_map command: vconfig: socket or ioctl error for set_ingress_map: Operation not permitted In vlan.c, vlan_ioctl_handler for SET_VLAN_INGRESS_PRIORITY_CMD sets err = -EPERM and calls vlan_dev_set_ingress_priority. vlan_dev_set_ingress_priority is a void function so err remains at -EPERM and results in the vconfig error (even though the ingress map was set). Fix by setting err = 0 after the vlan_dev_set_ingress_priority call. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Patrick McHardy authored
patch d932e04a in mainline. [PATCH] [VLAN]: Don't synchronize addresses while the vlan device is down While the VLAN device is down, the unicast addresses are not configured on the underlying device, so we shouldn't attempt to sync them. Noticed by Dmitry Butskoy <buc@odusz.so-cdu.ru> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Radu Rendec authored
changeset 543821c6 in mainline. [PKT_SCHED] CLS_U32: Fix endianness problem with u32 classifier hash masks. While trying to implement u32 hashes in my shaping machine I ran into a possible bug in the u32 hash/bucket computing algorithm (net/sched/cls_u32.c). The problem occurs only with hash masks that extend over the octet boundary, on little endian machines (where htonl() actually does something). Let's say that I would like to use 0x3fc0 as the hash mask. This means 8 contiguous "1" bits starting at b6. With such a mask, the expected (and logical) behavior is to hash any address in, for instance, 192.168.0.0/26 in bucket 0, then any address in 192.168.0.64/26 in bucket 1, then 192.168.0.128/26 in bucket 2 and so on. This is exactly what would happen on a big endian machine, but on little endian machines, what would actually happen with current implementation is 0x3fc0 being reversed (into 0xc03f0000) by htonl() in the userspace tool and then applied to 192.168.x.x in the u32 classifier. When shifting right by 16 bits (rank of first "1" bit in the reversed mask) and applying the divisor mask (0xff for divisor 256), what would actually remain is 0x3f applied on the "168" octet of the address. One could say is this can be easily worked around by taking endianness into account in userspace and supplying an appropriate mask (0xfc03) that would be turned into contiguous "1" bits when reversed (0x03fc0000). But the actual problem is the network address (inside the packet) not being converted to host order, but used as a host-order value when computing the bucket. Let's say the network address is written as n31 n30 ... n0, with n0 being the least significant bit. When used directly (without any conversion) on a little endian machine, it becomes n7 ... n0 n8 ..n15 etc in the machine's registers. Thus bits n7 and n8 would no longer be adjacent and 192.168.64.0/26 and 192.168.128.0/26 would no longer be consecutive. The fix is to apply ntohl() on the hmask before computing fshift, and in u32_hash_fold() convert the packet data to host order before shifting down by fshift. With helpful feedback from Jamal Hadi Salim and Jarek Poplawski. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Evgeniy Polyakov authored
[PKT_SCHED]: Fix OOPS when removing devices from a teql queuing discipline [ Upstream commit: 4f9f8311 ] tecl_reset() is called from deactivate and qdisc is set to noop already, but subsequent teql_xmit does not know about it and dereference private data as teql qdisc and thus oopses. not catch it first :) Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Miller authored
patch bf3c23d1 in mainline. [NET]: Fix error reporting in sys_socketpair(). If either of the two sock_alloc_fd() calls fail, we forget to update 'err' and thus we'll erroneously return zero in these cases. Based upon a report and patch from Rich Paul, and commentary from Chuck Ebbert. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Johannes Berg authored
patch 94e10bfb in mainline. The MLME request reason code is host-endian and our passing it to the low level functions is host-endian as well since they do the swapping. I noticed that the reason code 768 was sent (0x300) rather than 3 when wpa_supplicant terminates. This removes the superfluous cpu_to_le16() call. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tony Battersby authored
patch fa8705b0 in mainline. [NET]: sanitize kernel_accept() error path If kernel_accept() returns an error, it may pass back a pointer to freed memory (which the caller should ignore). Make it pass back NULL instead for better safety. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Herbert Xu authored
[TCP]: Fix size calculation in sk_stream_alloc_pskb [ Upstream commit: fb93134d ] We round up the header size in sk_stream_alloc_pskb so that TSO packets get zero tail room. Unfortunately this rounding up is not coordinated with the select_size() function used by TCP to calculate the second parameter of sk_stream_alloc_pskb. As a result, we may allocate more than a page of data in the non-TSO case when exactly one page is desired. In fact, rounding up the head room is detrimental in the non-TSO case because it makes memory that would otherwise be available to the payload head room. TSO doesn't need this either, all it wants is the guarantee that there is no tail room. So this patch fixes this by adjusting the skb_reserve call so that exactly the requested amount (which all callers have calculated in a precise way) is made available as tail room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Herbert Xu authored
patch deea84b0 in mainline. [NET]: Fix SKB_WITH_OVERHEAD calculation The calculation in SKB_WITH_OVERHEAD is incorrect in that it can cause an overflow across a page boundary which is what it's meant to prevent. In particular, the header length (X) should not be lumped together with skb_shared_info. The latter needs to be aligned properly while the header has no choice but to sit in front of wherever the payload is. Therefore the correct calculation is to take away the aligned size of skb_shared_info, and then subtract the header length. The resulting quantity L satisfies the following inequality: SKB_DATA_ALIGN(L + X) + sizeof(struct skb_shared_info) <= PAGE_SIZE This is the quantity used by alloc_skb to do the actual allocation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ingo Molnar authored
patch 092e9d93 in mainline. [9P]: build fix with !CONFIG_SYSCTL found via make randconfig build testing: net/built-in.o: In function `init_p9': mod.c:(.init.text+0x3b39): undefined reference to `p9_sysctl_register' net/built-in.o: In function `exit_p9': mod.c:(.exit.text+0x36b): undefined reference to `p9_sysctl_unregister' Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Patrick McHardy authored
patch 3c0cfc13 in mainline The fourth parameter of /proc/net/psched is supposed to show the timer resultion and is used by HTB userspace to calculate the necessary burst rate. Currently we show the clock resolution, which results in a too low burst rate when the two differ. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andy Green authored
patch dfe6e81d in mainline. ieee80211_get_radiotap_len() tries to dereference radiotap length without taking care that it is completely unaligned and get_unaligned() is required. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andy Green authored
patch 9b8a74e3 in mainline. Michael Wu noticed that the skb length checking is not taken care of enough when a packet is presented on the Monitor interface for injection. This patch improves the sanity checking and removes fake offsets placed into the skb network and transport header. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
John W. Linville authored
patch b3316157 in mainline. In STA mode, the AP will echo our traffic. This includes multicast traffic. Receiving these frames confuses some protocols and applications, notably IPv6 Duplicate Address Detection. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
Reverted upstream by commit 6a22c57b Revert this commit: commit 2e1c49db Author: Zou Nan hai <nanhai.zou@intel.com> Date: Fri Jun 1 00:46:28 2007 -0700 x86_64: allocate sparsemem memmap above 4G This reverts commit 2e1c49db. First off, testing in Fedora has shown it to cause boot failures, bisected down by Martin Ebourne, and reported by Dave Jobes. So the commit will likely be reverted in the 2.6.23 stable kernels. Secondly, in the 2.6.24 model, x86-64 has now grown support for SPARSEMEM_VMEMMAP, which disables the relevant code anyway, so while the bug is not visible any more, it's become invisible due to the code just being irrelevant and no longer enabled on the only architecture that this ever affected. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Martin Ebourne <fedora@ebourne.me.uk> Cc: Zou Nan hai <nanhai.zou@intel.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dave Johnson authored
patch edaf420f in mainline. I ran into this problem on a system that was unable to obtain NTP sync because the clock was running very slow (over 10000ppm slow). ntpd had declared all of its peers 'reject' with 'peer_dist' reason. On investigation, the tsc_khz variable was significantly incorrect causing xtime to run slow. After a reboot tsc_khz was correct so I did a reboot test to see how often the problem occurred: Test was done on a 2000 Mhz Xeon system. Of 689 reboots, 8 of them had unacceptable tsc_khz values (>500ppm): range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 21 3.048% 1999800 - 1999850 166 24.128% 1999850 - 1999900 241 35.029% 1999900 - 1999950 211 30.669% 1999950 - 2000000 42 6.105% 2000000 - 2000000 0 0.000% 2000050 - 2000100 0 0.000% [...] 2000100 - 2015000 1 0.145% << BAD 2015000 - 2030000 6 0.872% << BAD 2030000 - 2045000 1 0.145% << BAD 2045000 < 0 0.000% The worst boot was 2032.577 Mhz, over 1.5% off! It appears that on rare occasions, mach_countup() is taking longer to complete than necessary. I suspect that this is caused by the CPU taking a periodic SMI interrupt right at the end of the 30ms calibration loop. This would cause the loop to delay while the SMI BIOS hander runs. The resulting TSC value is beyond what it actually should be resulting in a higher tsc_khz. The below patch makes native_calculate_cpu_khz() take the best (shortest duration, lowest khz) run of it's 3 calibration loops. If a SMI goes off causing a bad result (long duration, higher khz) it will be discarded. With the patch applied, 300 boots of the same system produce good results: range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 30 10.000% 1999800 - 1999850 166 55.333% 1999850 - 1999900 89 29.667% 1999900 - 1999950 15 5.000% 1999950 < 0 0.000% Problem was found and tested against 2.6.18. Patch is against 2.6.22. Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
H. Peter Anvin authored
patch e6e1ace9 in mainline. We use signed values for limit checking since the values can go negative under certain circumstances. However, sizeof() is unsigned and forces the comparison to be unsigned, so move the comparison into the heap_free() macros so we can ensure it is a signed comparison. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
H. Peter Anvin authored
patch 6b6815c6 in mainline. Apparently some specific versions of LILO enter the kernel with a stack pointer that doesn't match the rest of the segments. Make our best attempt at untangling the resulting mess. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ingo Molnar authored
patch 9a24d04a upstream While we were reviewing pageattr_32/64.c for unification, Thomas Gleixner noticed the following serious SMP bug in global_flush_tlb(): down_read(&init_mm.mmap_sem); list_replace_init(&deferred_pages, &l); up_read(&init_mm.mmap_sem); this is SMP-unsafe because list_replace_init() done on two CPUs in parallel can corrupt the list. This bug has been introduced about a year ago in the 64-bit tree: commit ea7322de Author: Andi Kleen <ak@suse.de> Date: Thu Dec 7 02:14:05 2006 +0100 [PATCH] x86-64: Speed and clean up cache flushing in change_page_attr down_read(&init_mm.mmap_sem); - dpage = xchg(&deferred_pages, NULL); + list_replace_init(&deferred_pages, &l); up_read(&init_mm.mmap_sem); the xchg() based version was SMP-safe, but list_replace_init() is not. So this "cleanup" introduced a nasty bug. why this bug never become prominent is a mystery - it can probably be explained with the (still) relative obscurity of the x86_64 architecture. the safe fix for now is to write-lock init_mm.mmap_sem. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeremy Fitzhardinge authored
patch ace2e92e in mainline. XFS leaves stray mappings around when it vmaps memory to make it virtually contigious. This upsets Xen if one of those pages is being recycled into a pagetable, since it finds an extra writable mapping of the page. This patch solves the problem in a brute force way, by making XFS always eagerly unmap its mappings. [ Stable: This works around a bug in 2.6.23. We may come up with a better solution for mainline, but this seems like a low-impact fix for the stable kernel. ] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: XFS masters <xfs-masters@oss.sgi.com> Cc: Morten =?utf-8?q?B=C3=B8geskov?= <xen-users@morten.bogeskov.dk> Cc: Mark Williamson <mark.williamson@cl.cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeremy Fitzhardinge authored
patch e3d26976 in mainline. The kernel's copy of struct vcpu_register_vcpu_info was out of date, at best causing the hypercall to fail and the guest kernel to fall back to the old mechanism, or worse, causing random memory corruption. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Stable Kernel <stable@kernel.org> Cc: Morten =?utf-8?q?B=C3=B8geskov?= <xen-users@morten.bogeskov.dk> Cc: Mark Williamson <mark.williamson@cl.cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeremy Fitzhardinge authored
patch 9f79991d in mainline. When a pagetable is no longer in use, it must be unpinned so that its pages can be freed. However, this is only possible if there are no stray uses of the pagetable. The code currently deals with all the usual cases, but there's a rare case where a vcpu is changing cr3, but is doing so lazily, and the change hasn't actually happened by the time the pagetable is unpinned, even though it appears to have been completed. This change adds a second per-cpu cr3 variable - xen_current_cr3 - which tracks the actual state of the vcpu cr3. It is only updated once the actual hypercall to set cr3 has been completed. Other processors wishing to unpin a pagetable can check other vcpu's xen_current_cr3 values to see if any cross-cpu IPIs are needed to clean things up. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeremy Fitzhardinge authored
patch 91e0c5f3 in mainline. This adds a mechanism to register a callback function to be called once a batch of hypercalls has been issued. This is typically used to unlock things which must remain locked until the hypercall has taken place. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Lepton Wu authored
commit a24864a1 uml: definitively kill subprocesses on panic In a stock 2.6.22.6 kernel, poweroff a user mode linux guest (2.6.22.6 running in skas0 mode) will halt the host linux. I think the reason is the kernel thread abort because of a bug. Then the sys_reboot in process of user mode linux guest is not trapped by the user mode linux kernel and is executed by host. I think it is better to make sure all of our children process to quit when user mode linux kernel abort. [ jdike - the kernel process needs to ignore SIGTERM, plus the waitpid/kill loop is needed to make sure that all of our children are dead before the kernel exits ] Signed-off-by: Lepton Wu <ytht.net@gmail.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Dike authored
commit 189872f9 in mainline. uml: don't use glibc asm/user.h Stop including asm/user.h from libc - it seems to be disappearing from distros. It's replaced with sys/user.h which defines user_fpregs_struct and user_fpxregs_struct instead of user_i387_struct and struct user_fxsr_struct on i386. As a bonus, on x86_64, I get to dump some stupid typedefs which were needed in order to get asm/user.h to compile. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Dike authored
commit 818f6ef4 in mainline. uml: fix an IPV6 libc vs kernel symbol clash On some systems, with IPV6 configured, there is a clash between the kernel's in6addr_any and the one in libc. This is handled in the usual (gross) way of defining the kernel symbol out of the way on the gcc command line. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Dike authored
commit 71f926f2 in mainline. uml: stop using libc asm/page.h Remove includes of asm/page.h from libc code. This header seems to be disappearing, and UML doesn't make much use of it anyway. The one use, PAGE_SHIFT in stub.h, is handled by copying the constant from the kernel side of the house in common_offsets.h. [ jdike - added arch/um/kernel/skas/clone.c for -stable ] Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Michael Ellerman authored
patch db220b23 in mainline. pci_device_to_OF_node() returns the device node attached to a PCI device, but doesn't actually grab a reference - we need to do it ourselves. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kumar Gala authored
patch ba02946a in mainline Its legal for the stfiwx instruction to have RA = 0 as part of its effective address calculation. This is illegal for all other XE form instructions. Add code to compute the proper effective address for stfiwx if RA = 0 rather than treating it as illegal. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ralf Baechle authored
patch 572afc24 in mainline. Tested with Malta; inflates malta_defconfig by 3932 bytes. Ideally there should be additional configuration to allow getting rid of this overhead but that would be too much complexity at this stage of the release cycle. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ralf Baechle authored
patch a76ab5c1 in mainline. When GDB writes a breakpoint into address area of inferior process the kernel needs to invalidate the modified memory in the inferior which is done by calling flush_cache_page which in turns calls r4k_flush_cache_page and local_r4k_flush_cache_page for VSMP or SMTC kernel via r4k_on_each_cpu(). As the VSMP and SMTC SMP kernels for 34K are running on a single shared caches it is possible to get away without interprocessor function calls. This optimization is implemented in r4k_on_each_cpu, so local_r4k_flush_cache_page is only ever called on the local CPU. This is where the following code in local_r4k_flush_cache_page() strikes: /* * If ownes no valid ASID yet, cannot possibly have gotten * this page into the cache. */ if (cpu_context(smp_processor_id(), mm) == 0) return; On VSMP and SMTC had a function of cpu_context() for each CPU(TC). So in case another CPU than the CPU executing local_r4k_cache_flush_page has not accessed the mm but one of the other CPUs has there may be data to be flushed in the cache yet local_r4k_cache_flush_page will falsely return leaving the I-cache inconsistent for the breakpoint. While the issue was discovered with GDB it also exists in local_r4k_flush_cache_range() and local_r4k_flush_cache(). Fixed by introducing a new function has_valid_asid which on MT kernels returns true if a mm is active on any processor in the system. This is relativly expensive since for memory acccesses in that loop cache misses have to be assumed but it seems the most viable solution for 2.6.23 and older -stable kernels. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-