An error occurred fetching the project authors.
- 03 Dec, 2018 2 commits
-
-
Madhav Chauhan authored
There are two panel power sequencers. Each register has two addressable instances. This patch defines both the instances of Panel power control register Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/99bb687b17a9165527a6210a79271c8175c8a4e3.1543500286.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch define missing bitfield for shortplug ctl ddi register which will be used for ICL DSI GPIO programming. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4b9feb75eb6c303556b91c8a23c505a4593a99a1.1543500286.git.jani.nikula@intel.com
-
- 29 Nov, 2018 2 commits
-
-
Anusha Srivatsa authored
If FEC is supported, the corresponding DP_TP_CTL register bits have to be configured. The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register and wait till FEC_STATUS in DP_TP_CTL[28] is 1. Also add the warn message to make sure that the control register is already active while enabling FEC. v2: - Change commit message. Configure fec state after link training (Manasi, Gaurav) - Remove redundent checks (Manasi) - Remove the registers that get added automagically (Anusha) v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) v4: rebased. v5: - Move the code to the proper spot, according to spec.(Ville) - Use fec state as a check too. v6: Pass intel_encoder, instead of intel_dp. (Ville) v7: Remove unwanted comments (Manasi) Cc: dri-devel@lists.freedesktop.org Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-16-manasi.d.navare@intel.com
-
Manasi Navare authored
Infoframes are used to send secondary data packets. This patch adds support for DSC Picture parameter set secondary data packets in the existing write_infoframe helpers. v3: * Unused variables cleanup (Ville) v2: * Rebase on drm-tip (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-9-manasi.d.navare@intel.com
-
- 21 Nov, 2018 2 commits
-
-
Imre Deak authored
Depending on the transcoder enum values to translate from transcoder to the corresponding CHICKEN_TRANS register can easily break if we add a new transcoder. Add an explicit mapping instead, by using helpers to look up the register instance either by transcoder or port (since unconveniently the registers have both port and transcoder specific bits). While at it also check for the correctness of GEN, port, transcoder. I wasn't sure if psr2_enabled can only be set for GEN9+, but that seems to be the case indeed (see setting of sink_psr2_support in intel_psr_init_dpcd()). v2 (Ville): - Make gen9_chicken_trans_reg() internal to intel_psr.c. - s/trans/cpu_transcoder/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181119180021.370-1-imre.deak@intel.com
-
Imre Deak authored
Depending on the transcoder enum values to translate from transcoder to EDP PSR flags can easily break if we add a new transcoder. So remove the dependency by using an explicit mapping. While at it also add a WARN for unexpected trancoders. v2: - Simplify things by defining flag shift values instead of indices. - s/trans/cpu_transcoder/ (Ville) v3: - Define flags to look like separate bits instead of the values of the same bitfield. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-2-imre.deak@intel.com
-
- 19 Nov, 2018 1 commit
-
-
Joonas Lahtinen authored
Userspace portion is still missing. This reverts commit cd956bfc. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
-
- 14 Nov, 2018 2 commits
-
-
Mika Kuoppala authored
This got duplicated on introducing icl workarounds. Fix by using the older definition and moving the wa bit definition there. No functional changes. v3: avoid fixes tag, whitespace (Chris) References: 908ae051 ("drm/i915/icl: WaDisCtxReload") Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145333.10570-1-mika.kuoppala@linux.intel.com
-
Paulo Zanoni authored
Although CNP names this field "Counter Fraction", what we write to the register is really the denominator for the fractional part of the divider, not the fractional part (and the field description even says that). The ICP spec renamed the field to "Counter Fraction Denominator", which makes a lot more sense. Use the more complete ICL naming because we will merge the CNP and ICP functions into a single one, which will introduce the concept of the numerator. That will make a lot more sense when you read the "num/frac = den" calculation. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-2-paulo.r.zanoni@intel.com
-
- 09 Nov, 2018 1 commit
-
-
Ville Syrjälä authored
Due to the constant alpha we're going to have to program two of the the tree keying registers anyway, so might as well always program all three. And parametrize the plane constant alpha define while at it. v2: Rebase due to input CSC Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107184138.31359-1-ville.syrjala@linux.intel.comReviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 06 Nov, 2018 3 commits
-
-
Manasi Navare authored
This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Dhinakaran Pandiyan authored
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com (cherry picked from commit 09209662) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Uma Shankar authored
Defined the plane input csc coefficient registers and macros. 6 registers are used to program a total of 9 coefficients, added macros to define each of them for all the planes supporting the feature on pipes. On ICL, bottom 3 planes have this capability. v2: Segregated the register macro definition as separate patch as per Maarten's suggestion. v3: Removed a redundant 3rd Pipe register definition and simplified the equally spaced register definition by adding an offset as per Matt's comment. v4: No Change v5: Renamed the register Macro as per Matt's suggestion. v6: No Change v7: No Change v8: No Change v9: No Change Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-2-git-send-email-uma.shankar@intel.com
-
- 02 Nov, 2018 6 commits
-
-
Anusha Srivatsa authored
The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset from the base - which is the FLexi IO Adaptor. Lets follow the offset calculation while accessing these registers. v2: - Follow spec for numbering - s/0/1(Lucas) - s/FIA_1/FIA1_BASE (Anusha) v3: - Remove register offset defines. (Jani) - Update comment. (Anusha) v4: rebase. Remove comment.(Lucas) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com
-
Jani Nikula authored
Keep the register choosing macros together. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-4-jani.nikula@intel.com
-
Jani Nikula authored
Try to make it slightly less of an eye sore. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com
-
Jani Nikula authored
Minor semantic nit, no functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-2-jani.nikula@intel.com
-
Jani Nikula authored
The device info offset arrays for unevenly spaced register offsets is great for widely used registers. However, the palette registers are only used in one function, i9xx_load_luts_internal(), and only for GMCH platforms, wasting device info. Replace palette_offsets with _PICK() in palette register definition. While the use of _PICK() does not check for pipe C existence, neither does the current offset array usage, and leads to bogus address when pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads to a sensible register offset, just non-existing on non-CHV. Either way, this shouldn't happen anyway. Remove unused old palette macros while at it. Bloat-o-meter results below for completeness. add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184) Function old new delta i9xx_load_luts_internal 394 483 +89 i915_driver_load 5103 5107 +4 g4x_pre_enable_dp 378 379 +1 intel_engines_init_mmio 1117 1116 -1 intel_engine_lookup_user 47 46 -1 hdmi_port_clock_valid 310 309 -1 gen11_irq_handler 707 706 -1 intel_device_info_dump_runtime 329 311 -18 intel_device_info_runtime_init 5166 4910 -256 Total: Before=918650, After=918466, chg -0.02% add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576) Data old new delta intel_valleyview_info 200 188 -12 intel_skylake_gt4_info 200 188 -12 intel_skylake_gt3_info 200 188 -12 intel_skylake_gt2_info 200 188 -12 intel_skylake_gt1_info 200 188 -12 intel_sandybridge_m_gt2_info 200 188 -12 intel_sandybridge_m_gt1_info 200 188 -12 intel_sandybridge_d_gt2_info 200 188 -12 intel_sandybridge_d_gt1_info 200 188 -12 intel_pineview_info 200 188 -12 intel_kabylake_gt3_info 200 188 -12 intel_kabylake_gt2_info 200 188 -12 intel_kabylake_gt1_info 200 188 -12 intel_ivybridge_q_info 200 188 -12 intel_ivybridge_m_gt2_info 200 188 -12 intel_ivybridge_m_gt1_info 200 188 -12 intel_ivybridge_d_gt2_info 200 188 -12 intel_ivybridge_d_gt1_info 200 188 -12 intel_ironlake_m_info 200 188 -12 intel_ironlake_d_info 200 188 -12 intel_icelake_11_info 200 188 -12 intel_i965gm_info 200 188 -12 intel_i965g_info 200 188 -12 intel_i945gm_info 200 188 -12 intel_i945g_info 200 188 -12 intel_i915gm_info 200 188 -12 intel_i915g_info 200 188 -12 intel_i865g_info 200 188 -12 intel_i85x_info 200 188 -12 intel_i845g_info 200 188 -12 intel_i830_info 200 188 -12 intel_haswell_gt3_info 200 188 -12 intel_haswell_gt2_info 200 188 -12 intel_haswell_gt1_info 200 188 -12 intel_gm45_info 200 188 -12 intel_geminilake_info 200 188 -12 intel_g45_info 200 188 -12 intel_g33_info 200 188 -12 intel_coffeelake_gt3_info 200 188 -12 intel_coffeelake_gt2_info 200 188 -12 intel_coffeelake_gt1_info 200 188 -12 intel_cherryview_info 200 188 -12 intel_cannonlake_info 200 188 -12 intel_broxton_info 200 188 -12 intel_broadwell_rsvd_info 200 188 -12 intel_broadwell_gt3_info 200 188 -12 intel_broadwell_gt2_info 200 188 -12 intel_broadwell_gt1_info 200 188 -12 Total: Before=195529, After=194953, chg -0.29% Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
-
Anusha Srivatsa authored
This patch fixes the naming of the registers: s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL And also fix the hex values to lower case, to match rest of the definitions. Manasi noticed this with the patch that was merged. v2: fix "Fixes" tag. Fixes: 8b1b558d ("drm/i915/icl: Add DSS_CTL Registers") Suggested-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com
-
- 01 Nov, 2018 4 commits
-
-
Oscar Mateo authored
Required for Bindless samplers. Userspace consumer: mesa V2: Rebase V3: Update commit message Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-4-radhakrishna.sripada@intel.com
-
Radhakrishna Sripada authored
Gen11 Display suports 32 planes in total. Enable the new format in context status to be used and expanded to 32 planes. V2: Move the WA to display WA's(Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com
-
Anusha Srivatsa authored
Add defines for DSS_CTL registers. These registers specify the big joiner, splitter, overlap pixels and info regarding compression enabled on left or right branch. v2: - rebase. Remove overlapping defines(James Ausmus) - Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi) - take pixels as an argument for overlap.(Manasi) v3: - rebase. merge DSS_CTL1/2 introduced in Madhav's patch to avoid confusion (madhav chauhan) - Rename registers in accordance to BSpec (Madhav, Rodrigo) - Add define to conditionally check the buffer target depth (James Ausmus) v4: - remove redundant definitions.(madhav) v5: - Add mask for overlap pixels. - Code Style changes.(Madhav) v6: - Code style changes. (Madhav) Suggested-by: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Gaurav Singh <gaurav.k.singh@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/07021336cb87d09e8f97fbff709c4e686d7de536.1540900289.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch defines payload/header registers for each DSI transcoder used for transmitting DSI packets. v2 by Jani: - Drop full register mask and shift for payload - Use lower case for hex 0x Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/18275c49215e512347a14bc38715314c2d6f95a4.1540900289.git.jani.nikula@intel.com
-
- 31 Oct, 2018 3 commits
-
-
Manasi Navare authored
This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
-
Anusha Srivatsa authored
Add the newly added slice_row_per_frame parameter in the Picture Parameter Set registers. This defines the number of vertically stacked slices in a frame. Credits to Manasi for noticing bSpec change. Suggested-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-1-manasi.d.navare@intel.com
-
Madhav Chauhan authored
This patch defines DSI_HTX_TO, DSI_LRX_H_TO, DSI_PWAIT_TO and DSI_TA_TO registers for DSI transcoders '0' and '1'. They are used for contention recovery on DPHY. v2: Define SHIFT for bitfields. v3 by Jani: - Fix timeout bit definitions Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0b943c028a05edfd61c511d712c65c7e8bf70211.1540900289.git.jani.nikula@intel.com
-
- 29 Oct, 2018 3 commits
-
-
Dhinakaran Pandiyan authored
The bits weren't defined in descending order. v2: Move definitions in a separate patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-2-dhinakaran.pandiyan@intel.com
-
Dhinakaran Pandiyan authored
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com
-
Ramalingam C authored
Intel HDCP2.2 registers are defined with addr offsets and bit details. v2: Replaced the arith calc with _PICK [Sean Paul] v3: No changes. v4: %s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma] v5: Added parentheses for the parameters of macro. v6: No changes v7: No changes Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-7-git-send-email-ramalingam.c@intel.com
-
- 24 Oct, 2018 3 commits
-
-
Maarten Lankhorst authored
The UV plane is the master plane that does all color correction etc. It needs to be programmed with the dimensions for color plane 1 (UV). The Y plane just feeds the Y pixels to it. Program the scaler from the master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane. Changes since v1: - Make a common skl_program_plane, and use it for both plane updates. Changes since v2: - Make color_plane explicit, to clarify skl_update_plane(). (Ville) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-8-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
We configure the chroma upsampler with the same chroma siting as used by the scaler for consistency, the chroma upsampler is used instead of the scaler for YUV 4:2:0 on ICL's HDR planes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-7-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma upsampler to upscale YUV420 to YUV444 and the scaler should only be used for upscaling. Because of this we shouldn't program the scalers in planar mode if NV12 and the chroma upsampler are used. Instead program the scalers like on normal planes. Sprite 2 and 3 have no dedicated scaler, and need to program the selected Y plane in the scaler mode. Changes since v1: - Make the comment less confusing. Changes since v2: - Fix checkpatch warning (Matt) - gen10- -> Pre-gen11 (Ville) - PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt) - Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt) - Rename need_scaling to need_scaler. (Matt) - Move the crtc need_scaling check to skl_update_scaler_crtc(). Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-6-maarten.lankhorst@linux.intel.com
-
- 23 Oct, 2018 1 commit
-
-
Lionel Landwerlin authored
The way our hardware is designed doesn't seem to let us use the MI_RECORD_PERF_COUNT command without setting up a circular buffer. In the case where the user didn't request OA reports to be available through the i915 perf stream, we can set the OA buffer to the minimum size to avoid consuming memory which won't be used by the driver. v2: Simplify oa buffer size exponent selection (Chris) Reuse vma size field (Lionel) v3: Restrict size opening parameter to values supported by HW (Chris) v4: Drop out of date comment (Matt) Add debug message when buffer size is rejected (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
-
- 22 Oct, 2018 6 commits
-
-
Madhav Chauhan authored
This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers, bitfields, masks and macros used for configuring DSI panel. v2: Define remaining bitfields v3 by Jani: - Alignment fix Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch defines TRANS_CONF registers for DSI ports 0 and 1. Bitfields of these registers used for enabling and reading the current state of transcoder. v2: Add blank line before comment v3 by Jani: - Move DSI specific .pipe_offsets to GEN11_FEATURES - Macro placement and comment juggling Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch defines registers and bitfields used for programming DSI transcoder's horizontal and vertical timings. v2: Remove TRANS_TIMING_SHIFT definition v3 by Jani: - Group macros by transcoder Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dcc329280e3aca5b4fc3482c5bcaa0cac043c5d8.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2 registers and their bitfields for DSI. These registers are used for enabling port sync mode, input pipe select, data lane width configuration etc. v2: Changes: - Remove redundant extra line - Correct some of bitfield definition v3 by Jani: - Move DSI transcoder offsets to GEN11_FEATURES Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch defines transcoder function configuration registers and its bitfields for both DSI ports. Used while programming/enabling DSI transcoder. v2: Changes (Jani N) - Define _SHIFT and _MASK for bitfields - Define values for fields already shifted in place v3 by Jani: - Fix _SHIFT fields copy-pasted from _MASK - Indentation fixes - Reduce S3D orientation to single macro - Wrap a macro parameter in parens Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch adds _MMIO_DSI macros for accessing DSI transcoder registers. v2: Use _MMIO_TRANS() (Ville) Credits-to: Jani N Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3ab94184357d63f2f87b90ef6f5029fb19bef73a.1539613303.git.jani.nikula@intel.com
-
- 18 Oct, 2018 1 commit
-
-
Mahesh Kumar authored
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com (cherry picked from commit bb1c7edc) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-