I am leaving Marvell and already do not have access to my @marvell.com
email address.  So switching over to my korg mail address or removing my
address there another maintainer is already listed.  For the entries
there no other maintainer is listed I will keep looking into patches for
Cavium systems for a while until someone from Marvell takes it over.

Since I might have limited access to hardware and also limited time I
changed state to 'Odd Fixes' for those entries.
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
CC: Borislav Petkov <bp@alien8.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wolfram Sang <wsa@kernel.org>,
Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 52f23478 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].

Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement.  Fix it by sticking to the behavior intended
in the original patch [1].  In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.

The issue has been spotted via static analysis and code review.

[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/

Fixes: 52f23478 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.

It can be easily reproduced as below:

  watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
  CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
  Call Trace:
    shrink_lruvec+0x49f/0x640
    shrink_node+0x2a6/0x6f0
    do_try_to_free_pages+0xe9/0x3e0
    try_to_free_mem_cgroup_pages+0xef/0x1f0
    try_charge+0x2c1/0x750
    mem_cgroup_charge+0xd7/0x240
    __add_to_page_cache_locked+0x2fd/0x370
    add_to_page_cache_lru+0x4a/0xc0
    pagecache_get_page+0x10b/0x2f0
    filemap_fault+0x661/0xad0
    ext4_filemap_fault+0x2c/0x40
    __do_fault+0x4d/0xf9
    handle_mm_fault+0x1080/0x1790

It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.

Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot has reported an use-after-free in the uncharge_batch path

  BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline]
  BUG: KASAN: use-after-free in atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
  BUG: KASAN: use-after-free in atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
  BUG: KASAN: use-after-free in page_counter_cancel mm/page_counter.c:54 [inline]
  BUG: KASAN: use-after-free in page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
  Write of size 8 at addr ffff8880371c0148 by task syz-executor.0/9304

  CPU: 0 PID: 9304 Comm: syz-executor.0 Not tainted 5.8.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x1f0/0x31e lib/dump_stack.c:118
    print_address_description+0x66/0x620 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report+0x132/0x1d0 mm/kasan/report.c:530
    check_memory_region_inline mm/kasan/generic.c:183 [inline]
    check_memory_region+0x2b5/0x2f0 mm/kasan/generic.c:192
    instrument_atomic_write include/linux/instrumented.h:71 [inline]
    atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
    atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
    page_counter_cancel mm/page_counter.c:54 [inline]
    page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
    uncharge_batch+0x6c/0x350 mm/memcontrol.c:6764
    uncharge_page+0x115/0x430 mm/memcontrol.c:6796
    uncharge_list mm/memcontrol.c:6835 [inline]
    mem_cgroup_uncharge_list+0x70/0xe0 mm/memcontrol.c:6877
    release_pages+0x13a2/0x1550 mm/swap.c:911
    tlb_batch_pages_flush mm/mmu_gather.c:49 [inline]
    tlb_flush_mmu_free mm/mmu_gather.c:242 [inline]
    tlb_flush_mmu+0x780/0x910 mm/mmu_gather.c:249
    tlb_finish_mmu+0xcb/0x200 mm/mmu_gather.c:328
    exit_mmap+0x296/0x550 mm/mmap.c:3185
    __mmput+0x113/0x370 kernel/fork.c:1076
    exit_mm+0x4cd/0x550 kernel/exit.c:483
    do_exit+0x576/0x1f20 kernel/exit.c:793
    do_group_exit+0x161/0x2d0 kernel/exit.c:903
    get_signal+0x139b/0x1d30 kernel/signal.c:2743
    arch_do_signal+0x33/0x610 arch/x86/kernel/signal.c:811
    exit_to_user_mode_loop kernel/entry/common.c:135 [inline]
    exit_to_user_mode_prepare+0x8d/0x1b0 kernel/entry/common.c:166
    syscall_exit_to_user_mode+0x5e/0x1a0 kernel/entry/common.c:241
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Commit 1a3e1f40 ("mm: memcontrol: decouple reference counting from
page accounting") reworked the memcg lifetime to be bound the the struct
page rather than charges.  It also removed the css_put_many from
uncharge_batch and that is causing the above splat.

uncharge_batch() is supposed to uncharge accumulated charges for all
pages freed from the same memcg.  The queuing is done by uncharge_page
which however drops the memcg reference after it adds charges to the
batch.  If the current page happens to be the last one holding the
reference for its memcg then the memcg is OK to go and the next page to
be freed will trigger batched uncharge which needs to access the memcg
which is gone already.

Fix the issue by taking a reference for the memcg in the current batch.

Fixes: 1a3e1f40 ("mm: memcontrol: decouple reference counting from page accounting")
Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com
Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.czSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Use uintptr_t when casting numbers to pointers

 - Keep output expected by 3rd parties: Turn off summary for interval
   mode by default.

 - BPF is in kernel space, make sure do_validate_kcore_modules() knows
   about that.

 - Explicitly call out event modifiers in the documentation.

 - Fix jevents() allocation of space for regular expressions.

 - Address libtraceevent build warnings on 32-bit arches.

 - Fix checking of functions returns using ERR_PTR() in 'perf bench'.

* tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Add bpf image check to __map__is_kmodule
  perf record/stat: Explicitly call out event modifiers in the documentation
  perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
  perf stat: Turn off summary for interval mode by default
  libtraceevent: Fix build warning on 32-bit arches
  perf jevents: Fix suspicious code in fixregex()
  perf parse-events: Use uintptr_t when casting numbers to pointers

Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...

Merge gate page refcount fix from Dave Hansen:
 "During the conversion over to pin_user_pages(), gate pages were missed.

  The fix is pretty simple, and is accompanied by a new test from Andy
  which probably would have caught this earlier"

* emailed patches from Dave Hansen <dave.hansen@linux.intel.com>:
  selftests/x86/test_vsyscall: Improve the process_vm_readv() test
  mm: fix pin vs. gup mismatch with gate pages

The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage.  This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances.  This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default).  Fix by using try_grab_page() with appropriate flags
passed.

The long story:

Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts.  However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".

That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().

Enter gate pages, like the vsyscall page.  They are pages usually in the
kernel image, but which are mapped to userspace.  Userspace is allowed
access to them, including interfaces using get/pin_user_pages().  The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.

get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path.  If someone
pins a gate page, this happens:

	pin_user_pages()
		get_gate_page()
			try_get_page() // bump refcount +1
	... some time later
	unpin_user_pages()
		page_ref_sub_and_test(page, 1024))

... and boom, we get a refcount off by 1023.  This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default).  The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.

To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.

This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c0 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c0 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Karsten Graul says:

====================
net/smc: fixes 2020-09-03

Please apply the following patch series for smc to netdev's net tree.

Patch 1 fixes the toleration of older SMC implementations. Patch 2
takes care of a problem that happens when SMCR is used after SMCD
initialization failed. Patch 3 fixes a problem with freed send buffers,
and patch 4 corrects refcounting when SMC terminates due to device
removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:

[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125]  [<00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143]  [<00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158]  [<00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173]  [<00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187]  [<00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201]  [<00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219]  [<00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234]  [<00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310]  [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323]  [<00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334]  [<00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350]  [<00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362]  [<00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393]  [<00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408]  [<00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421]  [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433]  [<00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456]  #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0

The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.

Fixes: 611b63a1 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an SMC connection is created, and there is a problem to
create an RMB or DMB, the previously created send buffer is
thrown away as well including buffer descriptor freeing.
Make sure the connection no longer references the freed
buffer descriptor, otherwise bugs like this are possible:

[71556.835148] =============================================================================
[71556.835168] BUG kmalloc-128 (Tainted: G    B      OE    ): Poison overwritten
[71556.835172] -----------------------------------------------------------------------------

[71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b
[71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726
[71556.835234]     ___slab_alloc+0x5a4/0x690
[71556.835239]     __slab_alloc.constprop.0+0x70/0xb0
[71556.835243]     kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835250]     __smc_buf_create+0x184/0x578 [smc]
[71556.835257]     smc_buf_create+0x2e/0xe8 [smc]
[71556.835264]     smc_listen_work+0x516/0x6a0 [smc]
[71556.835275]     process_one_work+0x280/0x478
[71556.835280]     worker_thread+0x66/0x368
[71556.835287]     kthread+0x17a/0x1a0
[71556.835294]     ret_from_fork+0x28/0x2c
[71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726
[71556.835307]     __slab_free+0x246/0x560
[71556.835311]     kfree+0x398/0x3f8
[71556.835318]     smc_buf_create+0xd8/0xe8 [smc]
[71556.835324]     smc_listen_work+0x516/0x6a0 [smc]
[71556.835328]     process_one_work+0x280/0x478
[71556.835332]     worker_thread+0x66/0x368
[71556.835337]     kthread+0x17a/0x1a0
[71556.835344]     ret_from_fork+0x28/0x2c
[71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200
[71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2

[71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  kkkk....kkkkkkkk
[71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
[71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb                          ........
[71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G    B      OE     5.9.0-rc1uschi+ #54
[71556.835456] Hardware name: IBM 3906 M03 703 (LPAR)
[71556.835464] Workqueue: events smc_listen_work [smc]
[71556.835470] Call Trace:
[71556.835478]  [<00000000d5eaeb10>] show_stack+0x90/0xf8
[71556.835493]  [<00000000d66fc0f8>] dump_stack+0xa8/0xe8
[71556.835499]  [<00000000d61a511c>] check_bytes_and_report+0x104/0x130
[71556.835504]  [<00000000d61a57b2>] check_object+0x26a/0x2e0
[71556.835509]  [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238
[71556.835514]  [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690
[71556.835519]  [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0
[71556.835524]  [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835530]  [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc]
[71556.835538]  [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc]
[71556.835545]  [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc]
[71556.835549]  [<00000000d5f0f448>] process_one_work+0x280/0x478
[71556.835554]  [<00000000d5f0f6a6>] worker_thread+0x66/0x368
[71556.835559]  [<00000000d5f18692>] kthread+0x17a/0x1a0
[71556.835563]  [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c
[71556.835569] INFO: lockdep is turned off.
[71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b

[71556.835577] FIX kmalloc-128: Marking all objects used

Fixes: fd7f3a74 ("net/smc: remove freed buffer from list")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.

Fixes: be244f28 ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.

Fixes: c48254fa ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled.  A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.

Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails.  tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails.  We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task().  Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db219973 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.

Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.

Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.

Fixes: 3c29d448 ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Event modifiers are not mentioned in the perf record or perf stat
manpages.  Add them to orient new users more effectively by pointing
them to the perf list manpage for details.

Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()

Committer notes:

This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.

Fixes: 13edc237 ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.

So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.

Before:

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2
  #           time             counts unit events
       1.000265904           8,005.73 msec cpu-clock                 #    8.006 CPUs utilized
       1.000265904                601      context-switches          #    0.075 K/sec
       1.000265904                 10      cpu-migrations            #    0.001 K/sec
       1.000265904                  0      page-faults               #    0.000 K/sec
       1.000265904         66,746,521      cycles                    #    0.008 GHz
       1.000265904         71,874,398      instructions              #    1.08  insn per cycle
       1.000265904         13,356,781      branches                  #    1.668 M/sec
       1.000265904            298,756      branch-misses             #    2.24% of all branches
       2.001857667           8,012.52 msec cpu-clock                 #    8.013 CPUs utilized
       2.001857667                164      context-switches          #    0.020 K/sec
       2.001857667                 10      cpu-migrations            #    0.001 K/sec
       2.001857667                  2      page-faults               #    0.000 K/sec
       2.001857667          5,822,188      cycles                    #    0.001 GHz
       2.001857667          2,186,170      instructions              #    0.38  insn per cycle
       2.001857667            442,378      branches                  #    0.055 M/sec
       2.001857667             44,750      branch-misses             #   10.12% of all branches

   Performance counter stats for 'system wide':

           16,018.25 msec cpu-clock                 #    7.993 CPUs utilized
                 765      context-switches          #    0.048 K/sec
                  20      cpu-migrations            #    0.001 K/sec
                   2      page-faults               #    0.000 K/sec
          72,568,709      cycles                    #    0.005 GHz
          74,060,568      instructions              #    1.02  insn per cycle
          13,799,159      branches                  #    0.861 M/sec
             343,506      branch-misses             #    2.49% of all branches

         2.004118489 seconds time elapsed

After:

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2
  #           time             counts unit events
       1.001336393           8,013.28 msec cpu-clock                 #    8.013 CPUs utilized
       1.001336393                 82      context-switches          #    0.010 K/sec
       1.001336393                  8      cpu-migrations            #    0.001 K/sec
       1.001336393                  0      page-faults               #    0.000 K/sec
       1.001336393          4,199,121      cycles                    #    0.001 GHz
       1.001336393          1,373,991      instructions              #    0.33  insn per cycle
       1.001336393            270,681      branches                  #    0.034 M/sec
       1.001336393             31,659      branch-misses             #   11.70% of all branches
       2.003905006           8,020.52 msec cpu-clock                 #    8.021 CPUs utilized
       2.003905006                184      context-switches          #    0.023 K/sec
       2.003905006                  8      cpu-migrations            #    0.001 K/sec
       2.003905006                  2      page-faults               #    0.000 K/sec
       2.003905006          5,446,190      cycles                    #    0.001 GHz
       2.003905006          2,312,547      instructions              #    0.42  insn per cycle
       2.003905006            451,691      branches                  #    0.056 M/sec
       2.003905006             37,925      branch-misses             #    8.40% of all branches

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
  #           time             counts unit events
       1.001313128           8,013.20 msec cpu-clock                 #    8.013 CPUs utilized
       1.001313128                 83      context-switches          #    0.010 K/sec
       1.001313128                  8      cpu-migrations            #    0.001 K/sec
       1.001313128                  0      page-faults               #    0.000 K/sec
       1.001313128          4,470,950      cycles                    #    0.001 GHz
       1.001313128          1,440,045      instructions              #    0.32  insn per cycle
       1.001313128            283,222      branches                  #    0.035 M/sec
       1.001313128             33,576      branch-misses             #   11.86% of all branches
       2.003857385           8,020.34 msec cpu-clock                 #    8.020 CPUs utilized
       2.003857385                154      context-switches          #    0.019 K/sec
       2.003857385                  8      cpu-migrations            #    0.001 K/sec
       2.003857385                  2      page-faults               #    0.000 K/sec
       2.003857385          4,515,676      cycles                    #    0.001 GHz
       2.003857385          2,180,449      instructions              #    0.48  insn per cycle
       2.003857385            435,254      branches                  #    0.054 M/sec
       2.003857385             31,179      branch-misses             #    7.16% of all branches

   Performance counter stats for 'system wide':

           16,033.53 msec cpu-clock                 #    7.992 CPUs utilized
                 237      context-switches          #    0.015 K/sec
                  16      cpu-migrations            #    0.001 K/sec
                   2      page-faults               #    0.000 K/sec
           8,986,626      cycles                    #    0.001 GHz
           3,620,494      instructions              #    0.40  insn per cycle
             718,476      branches                  #    0.045 M/sec
              64,755      branch-misses             #    9.01% of all branches

         2.006124542 seconds time elapsed

Fixes: c7e5b328 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.
Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The new string should have enough space for the original string and the
back slashes IMHO.

Fixes: fbc2844e ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:

    CC       /tmp/build/perf/util/parse-events-bison.o
  util/parse-events.y: In function 'parse_events_parse':
  util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    514 |      (void *) $2, $6, $4);
        |      ^
  util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    531 |       (void *) $2, NULL, $4)) {
        |       ^
  util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    547 |      (void *) $2, $4, 0);
        |      ^
  util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    564 |       (void *) $2, NULL, 0)) {
        |       ^

Fixes: cabbf268 ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull misc build failure fixes from Mike Rapoport:
 "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.

  Some configurations of ia64 and microblaze use min_low_pfn and
  max_low_pfn in pfn_valid(). This causes build failures for modules
  that use pfn_valid().

  The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
  microblaze"

* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ia64: fix min_low_pfn/max_low_pfn build errors
  microblaze: fix min_low_pfn/max_low_pfn build errors

Pull affs fix from David Sterba:
 "One fix to make permissions work the same way as on AmigaOS"

* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix basic permission bits to actually work

Pull media fixes from Mauro Carvalho Chehab:

 - a compilation fix issue with ti-vpe on arm 32 bits

 - two Kconfig fixes for imx214 and max9286 drivers

 - a kernel information leak at v4l2-core on time32 compat ioctls

 - some fixes at rc core unbind logic

 - a fix at mceusb driver for it to not use GFP_ATOMIC

 - fixes at cedrus and vicodec drivers at the control handling logic

 - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock

* tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: mceusb: Avoid GFP_ATOMIC where it is not needed
  media: gpio-ir-tx: spinlock is not needed to disable interrupts
  media: rc: do not access device via sysfs after rc_unregister_device()
  media: rc: uevent sysfs file races with rc_unregister_device()
  media: max9286: Depend on OF_GPIO
  media: i2c: imx214: select V4L2_FWNODE
  media: cedrus: Add missing v4l2_ctrl_request_hdl_put()
  media: vicodec: add missing v4l2_ctrl_request_hdl_put()
  media: media/v4l2-core: Fix kernel-infoleak in video_put_user()
  media: ti-vpe: cal: Fix compilation on 32-bit ARM

Fix the registers being written to as the values were being over written
when writing the same registers.

Fixes: caabee5b ("net: phy: dp83867: support Wake on LAN")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an issue where the driver wrongly detected ipv6 neighbour updates
from the NFP as corrupt. Add a reserved field on the kernel side so
it is similar to the ipv4 version of the struct and has space for the
extra bytes from the card.

Fixes: 9ea9bfa1 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.

Before:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0

After:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2

Fixes: d8f74f09 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the default value of hard_header_len in hdlc.c from 16 to 0.

Currently there are 6 HDLC protocol drivers, among them:

hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when
attaching the protocol, overriding the default. So this patch does not
affect them.

hdlc_raw and hdlc_fr don't set hard_header_len when attaching the
protocol. So this patch will change the hard_header_len of the HDLC
device for them from 16 to 0.

This is the correct change because both hdlc_raw and hdlc_fr don't have
header_ops, and the code in net/packet/af_packet.c expects the value of
hard_header_len to be consistent with header_ops.

In net/packet/af_packet.c, in the packet_snd function,
for AF_PACKET/DGRAM sockets it would reserve a headroom of
hard_header_len and call dev_hard_header to fill in that headroom,
and for AF_PACKET/RAW sockets, it does not reserve the headroom and
does not call dev_hard_header, but checks if the user has provided a
header of length hard_header_len (in function dev_validate_header).

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We recently added some calls to clk_disable_unprepare() but we missed
the last error path if register_netdev() fails.

I made a couple cleanups so we avoid mistakes like this in the future.
First I reversed the "if (!ret)" condition and pulled the code in one
indent level.  Also, the "port->netdev = NULL;" is not required because
"port" isn't used again outside this function so I deleted that line.

Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull HID fixes from Jiri Kosina:

 - data sanitization and validtion fixes for report descriptor parser
   from Marc Zyngier

 - memory leak fix for hid-elan driver from Dinghao Liu

 - two device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: core: Sanitize event code and type when mapping input
  HID: core: Correctly handle ReportSize being zero
  HID: elan: Fix memleak in elan_input_configured
  HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
  HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices

VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in
bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest)
instead.

Fixes: 3e370952 ("net: bcmgenet: add support for ethtool rxnfc flows")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for a new port mode that is a backplane connection without
support for auto negotiation.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - writecache fix to allow dax_direct_access() to partitioned pmem
   devices.

 - multipath fix to avoid any Path Group initialization if
   'pg_init_in_progress' isn't set.

 - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures.

 - integrity fix to properly check integrity after device creation when
   in bitmap mode.

 - thinp and cache target __create_persistent_data_objects() fixes to
   reset the metadata's dm_block_manager pointer from PTR_ERR to NULL
   before returning from error path.

 - persistent-data block manager fix to guard against dm_block_manager
   NULL pointer dereference in dm_bm_is_read_only() and update various
   opencoded bm->read_only checks to use dm_bm_is_read_only() instead.

* tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin metadata: Fix use-after-free in dm_bm_set_read_only
  dm thin metadata:  Avoid returning cmd->bm wild pointer on error
  dm cache metadata: Avoid returning cmd->bm wild pointer on error
  dm integrity: fix error reporting in bitmap mode after creation
  dm crypt: Initialize crypto wait structures
  dm mpath: fix racey management of PG initialization
  dm writecache: handle DAX to partitions on persistent memory correctly

Pull xfs fixes from Darrick Wong:
 "Various small corruption fixes that have come in during the past
  month:

   - Avoid a log recovery failure for an insert range operation by
     rolling deferred ops incrementally instead of at the end.

   - Fix an off-by-one error when calculating log space reservations for
     anything involving an inode allocation or free.

   - Fix a broken shortform xattr verifier.

   - Ensure that the shortform xattr header padding is always
     initialized to zero"

* tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: initialize the shortform attr header padding entry
  xfs: fix boundary test in xfs_attr_shortform_verify
  xfs: fix off-by-one in inode alloc block reservation calculation
  xfs: finish dfops on every insert range shift iteration

Pull epoll fixup from Al Viro:
 "Fixup for epoll regression; there's a better solution longer term, but
  this is the least intrusive fix"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix regression in "epoll: Keep a reference on files added to the check list"

The following error ocurred when testing disk online/offline:

[  301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[  301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[  301.849206] Aborting journal on device dm-26-8.
[  301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[  301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[  301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]

Reason is:

 metadata_operation_failed
    abort_transaction
        dm_pool_abort_metadata
	    __create_persistent_data_objects
	        r = __open_or_format_metadata
	        if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
		    dm_block_manager_destroy(pmd->bm);
    set_pool_mode
	dm_pool_metadata_read_only(pool->pmd);
	dm_bm_set_read_only(pmd->bm);  --> use-after-free

Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions.  If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>