- 05 Jun, 2023 11 commits
-
-
Christoph Hellwig authored
Add a mark_dead method to blk_holder_ops that is called from blk_mark_disk_dead to notify the holder that the block device it is using has been marked dead. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Christian Brauner <brauner@kernel.org> Acked-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and installed in the block_device for exclusive claims. It will be used to allow the block layer to call back into the user of the block device for thing like notification of a removed device or a device resize. Signed-off-by:
-
Christoph Hellwig authored
There is only a single caller left, so fold the loop into that. Signed-off-by:
-
Christoph Hellwig authored
Delay dropping the block_devices for partitions in del_gendisk until after the call to blk_mark_disk_dead, so that we can implementat notification of removed devices in blk_mark_disk_dead. This requires splitting a lower-level drop_partition helper out of delete_partition and using that from del_gendisk, while having a common loop for the whole device and partitions that calls remove_inode_hash, fsync_bdev and __invalidate_device before the call to blk_mark_disk_dead. Signed-off-by:
-
Christoph Hellwig authored
Move the call to remove_inode_hash to the beginning of delete_partition, as we want to prevent opening a block_device that is about to be removed ASAP. Signed-off-by:
-
Christoph Hellwig authored
Check if GD_DEAD is already set in blk_mark_disk_dead, and don't duplicate the work already done. Signed-off-by:
-
Christoph Hellwig authored
blk_mark_disk_dead does very similar work a a section of del_gendisk: - set the GD_DEAD flag - set the capacity to zero - start a queue drain but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by the disk, sets the capacity to zero before starting the drain, and both with sending a uevent and kernel message for this fake capacity change. Move the exact logic from the more heavily used del_gendisk into blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk. Signed-off-by:
-
Christoph Hellwig authored
There is no reason for this lock to spin, and being able to sleep under it will come in handy soon. Signed-off-by:
-
Christoph Hellwig authored
The long if/else chain obsfucates the actual logic. Tidy it up to be more structured. Also drop the whole argument, as it can be trivially derived from bdev using bdev_whole, and having the bdev_whole in the function makes it easier to follow. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic to release an exclusive claim into a helper. Signed-off-by:
-
Christoph Hellwig authored
__KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop defining it. Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.deSigned-off-by:
-
- 04 Jun, 2023 1 commit
-
-
Ming Lei authored
Add control command of UBLK_U_CMD_GET_FEATURES for returning driver's feature set or capability. This way can simplify userspace for maintaining compatibility because userspace doesn't need to send command to one device for querying driver feature set any more. Such as, with the queried feature set, userspace can choose to use: - UBLK_CMD_GET_DEV_INFO2 or UBLK_CMD_GET_DEV_INFO, - UBLK_U_CMD_* or UBLK_CMD_* Userspace code: https://github.com/ming1/ubdsrv/commits/features-cmdSigned-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230603040601.775227-1-ming.lei@redhat.comSigned-off-by:
-
- 01 Jun, 2023 10 commits
-
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230530155608.272266-1-azeemshaikh38@gmail.comSigned-off-by:
-
Yu Kuai authored
Currently, icq is tracked by both request_queue(icq->q_node) and task(icq->ioc_node), and ioc_clear_queue() from elevator exit is not safe because it can access the list without protection: ioc_clear_queue ioc_release_fn lock queue_lock list_splice /* move queue list to a local list */ unlock queue_lock /* * lock is released, the local list * can be accessed through task exit. */ lock ioc->lock while (!hlist_empty) icq = hlist_entry lock queue_lock ioc_destroy_icq delete icq->ioc_node while (!list_empty) icq = list_entry() list_del icq->q_node /* * This is not protected by any lock, * list_entry concurrent with list_del * is not safe. */ unlock queue_lock unlock ioc->lock Fix this problem by protecting list 'icq->q_node' by queue_lock from ioc_clear_queue(). Reported-and-tested-by:
Pradeep Pragallapati <quic_pragalla@quicinc.com> Link: https://lore.kernel.org/lkml/20230517084434.18932-1-quic_pragalla@quicinc.com/Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Johannes Thumshirn authored
Now that all callers of bio_add_folio() check the return value, mark it as __must_check. Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Johannes Thumshirn authored
When the iomap buffered-io code can't add a folio to a bio, it allocates a new bio and adds the folio to that one. This is done using bio_add_folio(), but doesn't check for errors. As adding a folio to a newly created bio can't fail, use the newly introduced bio_add_folio_nofail() function. Reviewed-by:
-
Johannes Thumshirn authored
Just like for bio_add_pages() add a no-fail variant for bio_add_folio(). Reviewed-by:
-
Johannes Thumshirn authored
Now that all users of bio_add_page check for the return value, mark bio_add_page as __must_check. Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Johannes Thumshirn authored
crypt_alloc_buffer() already allocates enough entries in the clone bio's vector, so adding a page to the bio can't fail. Use __bio_add_page() to reflect this. Signed-off-by:
-
Johannes Thumshirn authored
Check if adding pages to resync bio fails and if bail out. As the comment above suggests this cannot happen, WARN if it actually happens. Technically __bio_add_pages() would be sufficient here, but asserting the pages actually get added to the bio is preferred. This way we can mark bio_add_pages as __must_check. Reviewed-by:
Song Liu <song@kernel.org> Signed-off-by:
-
Johannes Thumshirn authored
The sync request code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
-
Johannes Thumshirn authored
alloc_behind_master_bio() can possibly add multiple pages to a bio, but it is not checking for the return value of bio_add_page() if adding really succeeded. Check if the page adding succeeded and if not bail out. Reviewed-by:
-
- 31 May, 2023 15 commits
-
-
Johannes Thumshirn authored
The floppy code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
-
Johannes Thumshirn authored
The zram writeback code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by:
-
Johannes Thumshirn authored
The zonefs superblock reading code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Acked-by:
-
Johannes Thumshirn authored
The GFS2 superblock reading code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
-
Johannes Thumshirn authored
The JFS IO code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by:
-
Johannes Thumshirn authored
The raid5-ppl submission code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. For adding consecutive pages, the return is actually checked and a new bio is allocated if adding the page fails. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
-
Johannes Thumshirn authored
The raid5 log metadata submission code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
-
Johannes Thumshirn authored
The md-raid superblock writing code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Signed-of_-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Johannes Thumshirn authored
The buffer_head submission code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by:
Gou Hao <gouhao@uniontech.com> Reviewed-by:
-
Johannes Thumshirn authored
dm-zoned uses bio_add_page() for adding a single page to a freshly created metadata bio. Use __bio_add_page() instead as adding a single page to a new bio is always guaranteed to succeed. This brings us a step closer to marking bio_add_page() __must_check Reviewed-by:
-
Johannes Thumshirn authored
The drbd code only adds a single page to a newly created bio. So use __bio_add_page() to add the page which is guaranteed to succeed in this case. This brings us closer to marking bio_add_page() as __must_check. Reviewed-by:
-
Johannes Thumshirn authored
The swap code only adds a single page to a newly created bio. So use __bio_add_page() to add the page which is guaranteed to succeed in this case. This brings us closer to marking bio_add_page() as __must_check. Reviewed-by:
-
David Howells authored
Change the old block-based direct-I/O code to use iov_iter_extract_pages() to pin user pages or leave kernel pages unpinned rather than taking refs when submitting bios. This makes use of the preceding patches to not take pins on the zero page (thereby allowing insertion of zero pages in with pinned pages) and to get additional pins on pages, allowing an extracted page to be used in multiple bios without having to re-extract it. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Christoph Hellwig <hch@infradead.org> cc: David Hildenbrand <david@redhat.com> cc: Lorenzo Stoakes <lstoakes@gmail.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Matthew Wilcox <willy@infradead.org> cc: Jan Kara <jack@suse.cz> cc: Jeff Layton <jlayton@kernel.org> cc: Jason Gunthorpe <jgg@nvidia.com> cc: Logan Gunthorpe <logang@deltatee.com> cc: Hillf Danton <hdanton@sina.com> cc: Christian Brauner <brauner@kernel.org> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: linux-fsdevel@vger.kernel.org cc: linux-block@vger.kernel.org cc: linux-kernel@vger.kernel.org cc: linux-mm@kvack.org Reviewed-by:
-
David Howells authored
Provide a function to get an additional pin on a page that we already have a pin on. This will be used in fs/direct-io.c when dispatching multiple bios to a page we've extracted from a user-backed iter rather than redoing the extraction. Signed-off-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20230526214142.958751-3-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Make pin_user_pages*() leave a ZERO_PAGE unpinned if it extracts a pointer to it from the page tables and make unpin_user_page*() correspondingly ignore a ZERO_PAGE when unpinning. We don't want to risk overrunning a zero page's refcount as we're only allowed ~2 million pins on it - something that userspace can conceivably trigger. Add a pair of functions to test whether a page or a folio is a ZERO_PAGE. Signed-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by:
-
- 30 May, 2023 3 commits
-
-
Thomas Weißschuh authored
The struct is never modified so it can be const. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230419-const-partition-v3-4-4e14e48be367@weissschuh.netSigned-off-by:
-
Thomas Weißschuh authored
The struct is never modified so it can be const. Signed-off-by:
-
Thomas Weißschuh authored
The struct is never modified so it can be const. Signed-off-by:
-
